* Inline tasks in agenda search
@ 2011-08-01 15:57 suvayu ali
2011-08-01 16:49 ` suvayu ali
0 siblings, 1 reply; 7+ messages in thread
From: suvayu ali @ 2011-08-01 15:57 UTC (permalink / raw)
To: org-mode mailing list
Hi Orgers,
Is there any way to ignore the "END" entries in inline tasks in agenda
search results?
To give you an example the following entry:
*************** Detector effects :Qn:
1. How is the Gaussian used for smearing of proper
time resolution derived?
2. Why is the proper time error PDF needed? Why is
smearing of time resolution not enough?
*************** END
shows up in an agenda tag search for "Qn" (C-c a m Qn RET) as below.
analysis: Detector effects :Qn:
analysis: END :Qn:
My question is how do I ignore the entry END in the search results?
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Inline tasks in agenda search
2011-08-01 15:57 Inline tasks in agenda search suvayu ali
@ 2011-08-01 16:49 ` suvayu ali
2011-08-03 1:32 ` suvayu ali
0 siblings, 1 reply; 7+ messages in thread
From: suvayu ali @ 2011-08-01 16:49 UTC (permalink / raw)
To: org-mode mailing list
On Mon, Aug 1, 2011 at 5:57 PM, suvayu ali <fatkasuvayu+linux@gmail.com> wrote:
> Hi Orgers,
>
> Is there any way to ignore the "END" entries in inline tasks in agenda
> search results?
Strangely now this works! Don't know what I changed.
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Inline tasks in agenda search
2011-08-01 16:49 ` suvayu ali
@ 2011-08-03 1:32 ` suvayu ali
2011-08-05 8:53 ` Nicolas Goaziou
0 siblings, 1 reply; 7+ messages in thread
From: suvayu ali @ 2011-08-03 1:32 UTC (permalink / raw)
To: org-mode mailing list
Hi again,
On Mon, Aug 1, 2011 at 6:49 PM, suvayu ali <fatkasuvayu+linux@gmail.com> wrote:
> On Mon, Aug 1, 2011 at 5:57 PM, suvayu ali <fatkasuvayu+linux@gmail.com> wrote:
>> Hi Orgers,
>>
>> Is there any way to ignore the "END" entries in inline tasks in agenda
>> search results?
>
> Strangely now this works! Don't know what I changed.
>
I was mistaken, the problem is still there. The second search simply
didn't have the END entries which I mistakenly thought the problem was
resolved. Let me try to outline the issue clearly again. Lets say I have
this subtree:
** Bs⁰ mass :mass:
Bs⁰ mass is reconstructed for
+ Bs⁰->Dsπ using the π mass hypothesis
+ Bs⁰->DsK using both the K and π mass hypothesis
_Questions_:
*************** π hypothesis :Qn:
Why π hypothesis is considered only for DsK, and why
not K hypothesis for Dsπ?
*************** END
Now if I search for the tag mass (C-c a m mass RET), I get a search
result like this:
analysis: Bs⁰ mass :mass:
analysis: π hypothesis :mass::Qn:
analysis: END :mass::
The first 2 results are just what I expect. But the END from the inline
task shows up in the agenda too! Is there anyway to get rid of that?
Thanks a lot for any ideas.
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Inline tasks in agenda search
2011-08-03 1:32 ` suvayu ali
@ 2011-08-05 8:53 ` Nicolas Goaziou
2011-08-05 9:29 ` Suvayu Ali
0 siblings, 1 reply; 7+ messages in thread
From: Nicolas Goaziou @ 2011-08-05 8:53 UTC (permalink / raw)
To: suvayu ali; +Cc: org-mode mailing list
Hello,
suvayu ali <fatkasuvayu+linux@gmail.com> writes:
> Hi again,
>
> On Mon, Aug 1, 2011 at 6:49 PM, suvayu ali <fatkasuvayu+linux@gmail.com> wrote:
>> On Mon, Aug 1, 2011 at 5:57 PM, suvayu ali <fatkasuvayu+linux@gmail.com> wrote:
>>> Hi Orgers,
>>>
>>> Is there any way to ignore the "END" entries in inline tasks in agenda
>>> search results?
>>
>> Strangely now this works! Don't know what I changed.
>>
>
> I was mistaken, the problem is still there. The second search simply
> didn't have the END entries which I mistakenly thought the problem was
> resolved. Let me try to outline the issue clearly again. Lets say I have
> this subtree:
>
>
> ** Bs⁰ mass :mass:
>
> Bs⁰ mass is reconstructed for
> + Bs⁰->Dsπ using the π mass hypothesis
> + Bs⁰->DsK using both the K and π mass hypothesis
>
> _Questions_:
> *************** π hypothesis :Qn:
> Why π hypothesis is considered only for DsK, and why
> not K hypothesis for Dsπ?
> *************** END
>
>
> Now if I search for the tag mass (C-c a m mass RET), I get a search
> result like this:
>
>
> analysis: Bs⁰ mass :mass:
> analysis: π hypothesis :mass::Qn:
> analysis: END :mass::
>
>
> The first 2 results are just what I expect. But the END from the inline
> task shows up in the agenda too! Is there anyway to get rid of that?
You could add the following test, which will return a non-nil value for
the closing of an inline-task, in `org-agenda-skip-function':
#+begin_src org
(and (featurep 'org-inlinetask)
(let ((case-fold-search t))
(org-looking-at-p (concat (org-inlinetask-outline-regexp) "end[ \t]*$"))))
#+end_src
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Inline tasks in agenda search
2011-08-05 8:53 ` Nicolas Goaziou
@ 2011-08-05 9:29 ` Suvayu Ali
2011-08-05 10:00 ` Nicolas Goaziou
0 siblings, 1 reply; 7+ messages in thread
From: Suvayu Ali @ 2011-08-05 9:29 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: org-mode mailing list
Hi Nicolas,
Thanks a lot for your response.
On Fri, 05 Aug 2011 10:53:43 +0200
Nicolas Goaziou <n.goaziou@gmail.com> wrote:
> #+begin_src org
> (and (featurep 'org-inlinetask)
> (let ((case-fold-search t))
> (org-looking-at-p (concat (org-inlinetask-outline-regexp)
> "end[ \t]*$")))) #+end_src
I tried this:
(setq org-agenda-skip-function '(and (featurep 'org-inlinetask)
(let ((case-fold-search t))
(org-looking-at-p (concat (org-inlinetask-outline-regexp) "end[ \t]*$")))))
But performing a search where an END entry would otherwise show up
causes the following error. A search without END in the result
completes cleanly though.
Debugger entered--Lisp error: (wrong-type-argument integer-or-marker-p t)
org-agenda-skip()
byte-code(..)
org-scan-tags(agenda (and (progn (setq org-cached-props nil) (member "Dsh" tags-list)) t) nil)
byte-code(..)
org-tags-view(nil)
call-interactively(org-tags-view)
byte-code(..)
org-agenda(nil)
call-interactively(org-agenda nil nil)
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Inline tasks in agenda search
2011-08-05 9:29 ` Suvayu Ali
@ 2011-08-05 10:00 ` Nicolas Goaziou
2011-08-05 11:23 ` suvayu ali
0 siblings, 1 reply; 7+ messages in thread
From: Nicolas Goaziou @ 2011-08-05 10:00 UTC (permalink / raw)
To: Suvayu Ali; +Cc: org-mode mailing list
Suvayu Ali <fatkasuvayu+linux@gmail.com> writes:
> I tried this:
>
> (setq org-agenda-skip-function '(and (featurep 'org-inlinetask)
> (let ((case-fold-search t))
> (org-looking-at-p (concat (org-inlinetask-outline-regexp) "end[ \t]*$")))))
>
>
> But performing a search where an END entry would otherwise show up
> causes the following error. A search without END in the result
> completes cleanly though.
It's because I only gave you a part of the required function. Also, if
you look at the doc-string, you'll see that:
1. it should return the position to continue the search from;
2. you should set `org-agenda-skip-function-global' instead.
So, you can try:
#+begin_src org
(setq org-agenda-skip-function-global
(lambda ()
(when (and (featurep 'org-inlinetask)
(let ((case-fold-search t))
(org-looking-at-p (concat (org-inlinetask-outline-regexp)
"end[ \t]*$"))))
(or (save-excursion (outline-next-heading)) (point-max)))))
#+end_src
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: Inline tasks in agenda search
2011-08-05 10:00 ` Nicolas Goaziou
@ 2011-08-05 11:23 ` suvayu ali
0 siblings, 0 replies; 7+ messages in thread
From: suvayu ali @ 2011-08-05 11:23 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: org-mode mailing list
Hi Nicolas,
On Fri, Aug 5, 2011 at 12:00 PM, Nicolas Goaziou <n.goaziou@gmail.com> wrote:
> It's because I only gave you a part of the required function. Also, if
> you look at the doc-string, you'll see that:
> 1. it should return the position to continue the search from;
That was extremely dense of me. I wasn't thinking properly.
> 2. you should set `org-agenda-skip-function-global' instead.
>
Yes, I tried that first but it didn't work (obviously because of not
using the lambda!), so I tried the normal one.
Thanks a lot, works great now.
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2011-08-05 11:24 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-08-01 15:57 Inline tasks in agenda search suvayu ali
2011-08-01 16:49 ` suvayu ali
2011-08-03 1:32 ` suvayu ali
2011-08-05 8:53 ` Nicolas Goaziou
2011-08-05 9:29 ` Suvayu Ali
2011-08-05 10:00 ` Nicolas Goaziou
2011-08-05 11:23 ` suvayu ali
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).