From: John Kitchin <jkitchin@andrew.cmu.edu>
To: "Thomas S. Dye" <tsd@tsdye.com>
Cc: "emacs-orgmode@gnu.org" <emacs-orgmode@gnu.org>
Subject: Re: example filter for code blocks?
Date: Fri, 27 Sep 2013 08:59:36 -0400 [thread overview]
Message-ID: <CAJ51ETpZnQXOz6szDR8-T+1sv_9phWBX0Az3szy_6+bGpyFCAA@mail.gmail.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 6403 bytes --]
Actually, it turns out the publisher did put up the pdf with embedded
files, you just can't open them in a pdf in a browser. If you download the
file and open in a good pdf reader, you can open the embedded files. It
just made my day to figure that out!
This link:
http://pubs.acs.org/doi/suppl/10.1021/ie400582a/suppl_file/ie400582a_si_001.pdf
is a supporting information file created from org-mode, with embedded excel
sheets, and the org-file that was exported to the pdf! It contains all of
the data used to make the figures in the paper, along with the python
scripts we used to make the figures. It is probably our most complete
supplemental file ever. And, this file is freely available (although the
manuscript requires a subscription to the journal).
We actually wrote the manuscript in org-mode too, and submitted the latex
source that was exported from the org-file. Now, if we can just get
publishers to let us embed the org-source of the manuscript in the
supporting information file so at least the content is available for free...
John
-----------------------------------
John Kitchin
Associate Professor
Doherty Hall A207F
Department of Chemical Engineering
Carnegie Mellon University
Pittsburgh, PA 15213
412-268-7803
http://kitchingroup.cheme.cmu.edu
On Thu, Sep 26, 2013 at 4:58 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> Hi John,
>
> Terrific! There go my plans for the weekend ... :)
>
> Good luck with the heavy-handed journal processor. It seems worth
> pursuing to me.
>
> All the best,
> Tom
>
> John Kitchin <jkitchin@andrew.cmu.edu> writes:
>
> > I think it is so interesting, we have actually tried a variation of it! I
> > set up an org-file that exported a supplementary information file, using
> > attachfile to embed data files and scripts in the pdf. Unfortunately, the
> > journal "processed" the pdf file, and stripped those files out ;( We
> > haven't tried to see if we can get our original supplemental pdf
> accepted.
> >
> >
> > John
> >
> > -----------------------------------
> > John Kitchin
> > Associate Professor
> > Doherty Hall A207F
> > Department of Chemical Engineering
> > Carnegie Mellon University
> > Pittsburgh, PA 15213
> > 412-268-7803
> > http://kitchingroup.cheme.cmu.edu
> >
> >
> >
> > On Thu, Sep 26, 2013 at 3:43 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> >
> >> Hi John,
> >>
> >> John Kitchin <jkitchin@andrew.cmu.edu> writes:
> >>
> >> > Hi everyone,
> >> > Thanks for the tips in using export filters for code blocks. I
> thought I
> >> > would share my current solution. The goal was to export all the code
> >> blocks
> >> > in an org-file to files systematically named part1/script-%d.py where
> %d
> >> is
> >> > a number. I didnot want to tangle exactly, because I wanted to avoid
> >> naming
> >> > the code block tangle files.
> >> >
> >> > Then, I wanted to insert a pdf link that would open the file, after
> the
> >> > syntax highlighted code.
> >> >
> >> > I wanted this because it is not convenient to copy and paste the
> >> > syntax-highlighted code into an editor. I teach from the pdf that is
> >> > generated, and it would be convenient to just open the code, edit and
> >> rerun
> >> > to explore solutions.
> >>
> >> This seems like it might be an elegant way to distribute a piece of
> >> reproducible research. I suspect most readers would prefer to have a pdf
> >> entry point into a compendium over an Org-mode entry point. Instead of
> >> distributing the Org-mode file that is configured to make a pdf file,
> >> carry out calculations, draw figures, etc., one could distribute a
> >> ready-made pdf file with an appendix of Supplementary Material that has
> >> all the code for calculations, figures, etc.
> >>
> >> What do you think?
> >>
> >> All the best,
> >> Tom
> >>
> >> --
> >> Thomas S. Dye
> >> http://www.tsdye.com
> >>
> > I think it is so interesting, we have actually tried a variation of
> > it! I set up an org-file that exported a supplementary information
> > file, using attachfile to embed data files and scripts in the pdf.
> > Unfortunately, the journal "processed" the pdf file, and stripped
> > those files out ;( We haven't tried to see if we can get our original
> > supplemental pdf accepted.
> >
> > John
> >
> > -----------------------------------
> > John Kitchin
> > Associate Professor
> > Doherty Hall A207F
> > Department of Chemical Engineering
> > Carnegie Mellon University
> > Pittsburgh, PA 15213
> > 412-268-7803
> > http://kitchingroup.cheme.cmu.edu
> >
> > On Thu, Sep 26, 2013 at 3:43 PM, Thomas S. Dye <tsd@tsdye.com> wrote:
> >
> > Hi John,
> >
> >
> > John Kitchin <jkitchin@andrew.cmu.edu> writes:
> >
> > > Hi everyone,
> > > Thanks for the tips in using export filters for code blocks. I
> > thought I
> > > would share my current solution. The goal was to export all the
> > code blocks
> > > in an org-file to files systematically named part1/script-%d.py
> > where %d is
> > > a number. I didnot want to tangle exactly, because I wanted to
> > avoid naming
> > > the code block tangle files.
> > >
> > > Then, I wanted to insert a pdf link that would open the file,
> > after the
> > > syntax highlighted code.
> > >
> > > I wanted this because it is not convenient to copy and paste the
> > > syntax-highlighted code into an editor. I teach from the pdf
> > that is
> > > generated, and it would be convenient to just open the code,
> > edit and rerun
> > > to explore solutions.
> >
> >
> > This seems like it might be an elegant way to distribute a piece
> > of
> > reproducible research. I suspect most readers would prefer to have
> > a pdf
> > entry point into a compendium over an Org-mode entry point.
> > Instead of
> > distributing the Org-mode file that is configured to make a pdf
> > file,
> > carry out calculations, draw figures, etc., one could distribute a
> > ready-made pdf file with an appendix of Supplementary Material
> > that has
> > all the code for calculations, figures, etc.
> >
> > What do you think?
> >
> > All the best,
> > Tom
> >
> > --
> > Thomas S. Dye
> > http://www.tsdye.com
> >
> >
>
> --
> T.S. Dye & Colleagues, Archaeologists
> 735 Bishop St, Suite 315, Honolulu, HI 96813
> Tel: 808-529-0866, Fax: 808-529-0884
> http://www.tsdye.com
>
[-- Attachment #2: Type: text/html, Size: 8946 bytes --]
next reply other threads:[~2013-09-27 12:59 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-27 12:59 John Kitchin [this message]
2013-09-27 15:24 ` example filter for code blocks? Alan Schmitt
2013-09-27 15:34 ` John Kitchin
2013-09-30 7:49 ` Alan Schmitt
-- strict thread matches above, loose matches on Subject: below --
2013-09-27 18:44 John Kitchin
2013-09-26 17:57 John Kitchin
2013-09-26 19:43 ` Thomas S. Dye
2013-09-26 19:48 ` John Kitchin
2013-09-26 20:58 ` Thomas S. Dye
2013-09-27 7:42 ` Sebastien Vauban
2013-09-30 0:33 ` Thomas S. Dye
2013-09-30 0:45 ` John Kitchin
2013-09-30 2:58 ` Thomas S. Dye
2013-09-30 7:34 ` Achim Gratz
2013-09-30 17:48 ` Thomas S. Dye
2013-09-26 0:03 John Kitchin
2013-09-26 8:40 ` Daniele Pizzolli
2013-09-26 9:04 ` Marcin Borkowski
2013-09-26 12:18 ` Eric Schulte
2013-09-26 18:31 ` Cook, Malcolm
2013-09-26 19:34 ` John Kitchin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=CAJ51ETpZnQXOz6szDR8-T+1sv_9phWBX0Az3szy_6+bGpyFCAA@mail.gmail.com \
--to=jkitchin@andrew.cmu.edu \
--cc=emacs-orgmode@gnu.org \
--cc=tsd@tsdye.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).