emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Can I clone worg using http protocol?
@ 2013-03-24 17:52 John Hendy
  2013-03-25  0:54 ` Vladimir Lomov
  2013-03-25  9:17 ` Achim Gratz
  0 siblings, 2 replies; 9+ messages in thread
From: John Hendy @ 2013-03-24 17:52 UTC (permalink / raw)
  To: emacs-orgmode

I can't use git protocol due to being behind a firewall at work,
otherwise I would. I was trying to clone Worg via http protocol and am
getting an error

#+begin_src bash

$ git clone http://orgmode.org/w/worg.git
Cloning into 'worg'...
error: The requested URL returned error: 403 Forbidden while accessing
http://orgmode.org/w/worg.git/info/refs?service=git-upload-pack
fatal: HTTP request failed

#+end_src

I guess I figured I could given the line later on, which says, "If you
already have your local clone of Worg obtained via http protocol,..."

As a side note (forgive being a git novice if this should be evident),
I don't get this setting suggestion for .gitconfig:

#+begin_example
[url "git://worg@orgmode.org:worg.git"]
  pushInsteadOf = http://repo.or.cz/r/
#+end_example

If the pull was from orgmode.org/w/worg.git, why am I setting an
option to push with git to repo.or.cz?

Any suggestions?


John

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-24 17:52 Can I clone worg using http protocol? John Hendy
@ 2013-03-25  0:54 ` Vladimir Lomov
  2013-03-25  1:34   ` John Hendy
  2013-03-25  9:17 ` Achim Gratz
  1 sibling, 1 reply; 9+ messages in thread
From: Vladimir Lomov @ 2013-03-25  0:54 UTC (permalink / raw)
  To: emacs-orgmode

Hello,
** John Hendy [2013-03-24 12:52:34 -0500]:

> I can't use git protocol due to being behind a firewall at work,
> otherwise I would. I was trying to clone Worg via http protocol and am
> getting an error

> #+begin_src bash

> $ git clone http://orgmode.org/w/worg.git
> Cloning into 'worg'...
> error: The requested URL returned error: 403 Forbidden while accessing
> http://orgmode.org/w/worg.git/info/refs?service=git-upload-pack
> fatal: HTTP request failed

> #+end_src

> I guess I figured I could given the line later on, which says, "If you
> already have your local clone of Worg obtained via http protocol,..."

> As a side note (forgive being a git novice if this should be evident),
> I don't get this setting suggestion for .gitconfig:

> #+begin_example
> [url "git://worg@orgmode.org:worg.git"]
>   pushInsteadOf = http://repo.or.cz/r/
> #+end_example

> If the pull was from orgmode.org/w/worg.git, why am I setting an
> option to push with git to repo.or.cz?

> Any suggestions?

This works for me

git clone http://orgmode.org/org-mode.git

It may take some time to clone.

> John

---
WBR, Vladimir Lomov

-- 
"'Tis true, 'tis pity, and pity 'tis 'tis true."
-- Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-25  0:54 ` Vladimir Lomov
@ 2013-03-25  1:34   ` John Hendy
  2013-03-25  3:11     ` Vladimir Lomov
  0 siblings, 1 reply; 9+ messages in thread
From: John Hendy @ 2013-03-25  1:34 UTC (permalink / raw)
  To: Vladimir Lomov; +Cc: emacs-orgmode

On Sun, Mar 24, 2013 at 7:54 PM, Vladimir Lomov <lomov.vl@gmail.com> wrote:
> Hello,
> ** John Hendy [2013-03-24 12:52:34 -0500]:
>
>> I can't use git protocol due to being behind a firewall at work,
>> otherwise I would. I was trying to clone Worg via http protocol and am
>> getting an error
>
>> #+begin_src bash
>
>> $ git clone http://orgmode.org/w/worg.git
>> Cloning into 'worg'...
>> error: The requested URL returned error: 403 Forbidden while accessing
>> http://orgmode.org/w/worg.git/info/refs?service=git-upload-pack
>> fatal: HTTP request failed
>
>> #+end_src
>
>> I guess I figured I could given the line later on, which says, "If you
>> already have your local clone of Worg obtained via http protocol,..."
>
>> As a side note (forgive being a git novice if this should be evident),
>> I don't get this setting suggestion for .gitconfig:
>
>> #+begin_example
>> [url "git://worg@orgmode.org:worg.git"]
>>   pushInsteadOf = http://repo.or.cz/r/
>> #+end_example
>
>> If the pull was from orgmode.org/w/worg.git, why am I setting an
>> option to push with git to repo.or.cz?
>
>> Any suggestions?
>
> This works for me
>
> git clone http://orgmode.org/org-mode.git
>

I have been accessing orgmode git via http (I have to since I update
at work) for some time. But can you do the same with worg (the Orgmode
wiki, not orgmode itself)?

Thanks,
John

> It may take some time to clone.
>
>> John
>
> ---
> WBR, Vladimir Lomov
>
> --
> "'Tis true, 'tis pity, and pity 'tis 'tis true."
> -- Poloniouius, in Willie the Shake's _Hamlet, Prince of Darkness_
>
>

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-25  1:34   ` John Hendy
@ 2013-03-25  3:11     ` Vladimir Lomov
  2013-03-25  3:36       ` John Hendy
  0 siblings, 1 reply; 9+ messages in thread
From: Vladimir Lomov @ 2013-03-25  3:11 UTC (permalink / raw)
  To: John Hendy; +Cc: Emacs Org mode

Hello,
** John Hendy [2013-03-24 20:34:09 -0500]:

> On Sun, Mar 24, 2013 at 7:54 PM, Vladimir Lomov <lomov.vl@gmail.com> wrote:
>> Hello,
>> ** John Hendy [2013-03-24 12:52:34 -0500]:

>>> I can't use git protocol due to being behind a firewall at work,
>>> otherwise I would. I was trying to clone Worg via http protocol and am
>>> getting an error

>>> #+begin_src bash

>>> $ git clone http://orgmode.org/w/worg.git
>>> Cloning into 'worg'...
>>> error: The requested URL returned error: 403 Forbidden while accessing
>>> http://orgmode.org/w/worg.git/info/refs?service=git-upload-pack
>>> fatal: HTTP request failed

>>> #+end_src

>>> I guess I figured I could given the line later on, which says, "If you
>>> already have your local clone of Worg obtained via http protocol,..."

>>> As a side note (forgive being a git novice if this should be evident),
>>> I don't get this setting suggestion for .gitconfig:

>>> #+begin_example
>>> [url "git://worg@orgmode.org:worg.git"]
>>>   pushInsteadOf = http://repo.or.cz/r/
>>> #+end_example

>>> If the pull was from orgmode.org/w/worg.git, why am I setting an
>>> option to push with git to repo.or.cz?

>>> Any suggestions?

>> This works for me

>> git clone http://orgmode.org/org-mode.git

> I have been accessing orgmode git via http (I have to since I update
> at work) for some time. But can you do the same with worg (the Orgmode
> wiki, not orgmode itself)?

Sorry, didn't read your message carefully. There is way to just clone
worg repository but not, AFAIK, to push to it:

git clone http://orgmode.org/cgit.cgi/worg.git

I have successfully clone worg repo (takes ages to complete it).
AFAIU, in order to push to worg it must be accessible over https, but
seems https://orgmode.org/cgit.cgi/worg.git don't work.

> Thanks,
> John

---
WBR, Vladimir Lomov

-- 
Probable-Possible, my black hen,
She lays eggs in the Relative When.
She doesn't lay eggs in the Positive Now
Because she's unable to postulate How.
		-- Frederick Winsor

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-25  3:11     ` Vladimir Lomov
@ 2013-03-25  3:36       ` John Hendy
  0 siblings, 0 replies; 9+ messages in thread
From: John Hendy @ 2013-03-25  3:36 UTC (permalink / raw)
  To: Vladimir Lomov; +Cc: Emacs Org mode

On Sun, Mar 24, 2013 at 10:11 PM, Vladimir Lomov <lomov.vl@gmail.com> wrote:
> Hello,
> ** John Hendy [2013-03-24 20:34:09 -0500]:
>
>> On Sun, Mar 24, 2013 at 7:54 PM, Vladimir Lomov <lomov.vl@gmail.com> wrote:
>>> Hello,
>>> ** John Hendy [2013-03-24 12:52:34 -0500]:
>
>>>> I can't use git protocol due to being behind a firewall at work,
>>>> otherwise I would. I was trying to clone Worg via http protocol and am
>>>> getting an error
>
>>>> #+begin_src bash
>
>>>> $ git clone http://orgmode.org/w/worg.git
>>>> Cloning into 'worg'...
>>>> error: The requested URL returned error: 403 Forbidden while accessing
>>>> http://orgmode.org/w/worg.git/info/refs?service=git-upload-pack
>>>> fatal: HTTP request failed
>
>>>> #+end_src
>
>>>> I guess I figured I could given the line later on, which says, "If you
>>>> already have your local clone of Worg obtained via http protocol,..."
>
>>>> As a side note (forgive being a git novice if this should be evident),
>>>> I don't get this setting suggestion for .gitconfig:
>
>>>> #+begin_example
>>>> [url "git://worg@orgmode.org:worg.git"]
>>>>   pushInsteadOf = http://repo.or.cz/r/
>>>> #+end_example
>
>>>> If the pull was from orgmode.org/w/worg.git, why am I setting an
>>>> option to push with git to repo.or.cz?
>
>>>> Any suggestions?
>
>>> This works for me
>
>>> git clone http://orgmode.org/org-mode.git
>
>> I have been accessing orgmode git via http (I have to since I update
>> at work) for some time. But can you do the same with worg (the Orgmode
>> wiki, not orgmode itself)?
>
> Sorry, didn't read your message carefully. There is way to just clone
> worg repository but not, AFAIK, to push to it:
>
> git clone http://orgmode.org/cgit.cgi/worg.git
>
> I have successfully clone worg repo (takes ages to complete it).
> AFAIU, in order to push to worg it must be accessible over https, but
> seems https://orgmode.org/cgit.cgi/worg.git don't work.

I was also looking for push access. Thinking that other git sites I'd
seen with the look of Orgmode's don't have http protocol abilities.
For example, I once tried to inquire about this exact thing for the
zathura PDF reader project:
- https://bbs.archlinux.org/viewtopic.php?pid=921128#p921128

Their git repo has the same look of Org's, so I'm thinking the
frontend is provided by the same thing:
- http://git.pwmt.org/

No one had any solutions for me.

I just went ahead and used git today and can just deal with pushing
from home, I suppose :)


John

>
>> Thanks,
>> John
>
> ---
> WBR, Vladimir Lomov
>
> --
> Probable-Possible, my black hen,
> She lays eggs in the Relative When.
> She doesn't lay eggs in the Positive Now
> Because she's unable to postulate How.
>                 -- Frederick Winsor

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-24 17:52 Can I clone worg using http protocol? John Hendy
  2013-03-25  0:54 ` Vladimir Lomov
@ 2013-03-25  9:17 ` Achim Gratz
  2013-03-25 13:49   ` John Hendy
  1 sibling, 1 reply; 9+ messages in thread
From: Achim Gratz @ 2013-03-25  9:17 UTC (permalink / raw)
  To: emacs-orgmode

Am 24.03.2013 18:52, schrieb John Hendy:
> $ git clone http://orgmode.org/w/worg.git

Try

$ git clone http://orgmode.org/r/worg.git

(note how the "w/" changes to an "r/").


Regards,
-- 
Achim.

(on the road :-)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-25  9:17 ` Achim Gratz
@ 2013-03-25 13:49   ` John Hendy
  2013-03-25 14:33     ` Achim Gratz
  0 siblings, 1 reply; 9+ messages in thread
From: John Hendy @ 2013-03-25 13:49 UTC (permalink / raw)
  To: Achim Gratz; +Cc: emacs-orgmode

On Mon, Mar 25, 2013 at 4:17 AM, Achim Gratz <Stromeko@nexgo.de> wrote:
> Am 24.03.2013 18:52, schrieb John Hendy:
>>
>> $ git clone http://orgmode.org/w/worg.git
>
>
> Try
>
> $ git clone http://orgmode.org/r/worg.git
>
> (note how the "w/" changes to an "r/").
>

#+begin_example

$ git clone http://orgmode.org/r/worg.git
Cloning into 'worg'...
fatal: http://orgmode.org/r/worg.git/info/refs?service=git-upload-pack
not found: did you run git update-server-info on the server?

#+end_example

Having not much of an idea of what I'm doing, I also tried:

#+begin_example

$ git update-server-info http://orgmode.org/r/worg.git
fatal: Not a git repository (or any of the parent directories): .git

#+end_example


Thoughts?
John

P.S. Ideally, I'd like to clone with ssh/push access via http as well.
I'd love the http alternative to (if that's possible):

$ git clone worg@orgmode.org:worg.git

>
> Regards,
> --
> Achim.
>
> (on the road :-)
>
>

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-25 13:49   ` John Hendy
@ 2013-03-25 14:33     ` Achim Gratz
  2013-03-25 15:07       ` John Hendy
  0 siblings, 1 reply; 9+ messages in thread
From: Achim Gratz @ 2013-03-25 14:33 UTC (permalink / raw)
  To: emacs-orgmode

Am 25.03.2013 14:49, schrieb John Hendy:
> $ git clone http://orgmode.org/r/worg.git
> Cloning into 'worg'...
> fatal: http://orgmode.org/r/worg.git/info/refs?service=git-upload-pack
> not found: did you run git update-server-info on the server?

It looks like thios for of HTTP access has been switched off in 
preference to cgit.

> $ git update-server-info http://orgmode.org/r/worg.git
> fatal: Not a git repository (or any of the parent directories): .git

This is something that should be done on the server.  It generates some 
files with info that can otherwise be obtained via the Git protocol.

> P.S. Ideally, I'd like to clone with ssh/push access via http as well.
> I'd love the http alternative to (if that's possible):

You can't have authenticated push access via HTTP using SSH keys.  You 
could maybew use SSH tunneling via HTTP.


Regards,
-- 
Achim.

(on the road :-)

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Can I clone worg using http protocol?
  2013-03-25 14:33     ` Achim Gratz
@ 2013-03-25 15:07       ` John Hendy
  0 siblings, 0 replies; 9+ messages in thread
From: John Hendy @ 2013-03-25 15:07 UTC (permalink / raw)
  To: Achim Gratz; +Cc: emacs-orgmode

On Mon, Mar 25, 2013 at 9:33 AM, Achim Gratz <Stromeko@nexgo.de> wrote:
> Am 25.03.2013 14:49, schrieb John Hendy:
>
>> $ git clone http://orgmode.org/r/worg.git
>> Cloning into 'worg'...
>> fatal: http://orgmode.org/r/worg.git/info/refs?service=git-upload-pack
>> not found: did you run git update-server-info on the server?
>
>
> It looks like thios for of HTTP access has been switched off in preference
> to cgit.
>
>
>> $ git update-server-info http://orgmode.org/r/worg.git
>> fatal: Not a git repository (or any of the parent directories): .git
>
>
> This is something that should be done on the server.  It generates some
> files with info that can otherwise be obtained via the Git protocol.
>
>
>> P.S. Ideally, I'd like to clone with ssh/push access via http as well.
>> I'd love the http alternative to (if that's possible):

Good to know. So the definitive answer is, "No."

> You can't have authenticated push access via HTTP using SSH keys.  You could
> maybew use SSH tunneling via HTTP.

Eh. Not that critical. I'll just have to not be at work to push or
pull. I imagine that the majority of Worg pullers are wanting to push
as well, so there probably isn't a huge motivation to have http
enabled for pull if you can only push with git.


Thanks!
John

>
>
>
> Regards,
> --
> Achim.
>
> (on the road :-)
>
>

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2013-03-25 15:07 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-03-24 17:52 Can I clone worg using http protocol? John Hendy
2013-03-25  0:54 ` Vladimir Lomov
2013-03-25  1:34   ` John Hendy
2013-03-25  3:11     ` Vladimir Lomov
2013-03-25  3:36       ` John Hendy
2013-03-25  9:17 ` Achim Gratz
2013-03-25 13:49   ` John Hendy
2013-03-25 14:33     ` Achim Gratz
2013-03-25 15:07       ` John Hendy

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).