emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Some documentation suggestions
@ 2013-10-13 17:01 TonyMc
  2013-10-14  4:49 ` Noorul Islam K M
                   ` (2 more replies)
  0 siblings, 3 replies; 6+ messages in thread
From: TonyMc @ 2013-10-13 17:01 UTC (permalink / raw)
  To: emacs-orgmode

Dear Bastien et al,

I have been reading through the Org manual (version 8.2.1) and have
found a few errors of grammar or places where the English doesn't
sound right.  I list them below with some suggested replacements
(separated by ->).  I hope this is helpful.

Best,
Tony

* 1.4 Feedback
"If you re" -> "If you are"

* 2.5 Structure Editing
"level than" -> "level as" (twice)

* 2.6 Sparse Trees
"several commands creating" -> "several commands for creating"

* 2.7 Plain Lists
"theirs sub-items" -> "their sub-items"

3.1 Table editor
"region to table" -> "region to a table"

3.5.1 References
"one but last" -> "last but one"

3.5.4 Durations and time values
"[HH:MM[:SS]" -> "HH:MM[:SS]"

3.5.5 Field and range formulas
"column and rows" -> "columns and rows"
"To avoid this from happening" -> "To prevent this from happening" or
"To avoid this"

3.5.6 Column formulas
"can not" -> "cannot"

4.2 Internal links
"put the line" -> "put in the line"

4.6 Link abbreviations
"text don't" -> "text doesn't"

5.2.3 Multiple keyword sets
"S-<<right>>" -> "S-<right>"

5.3.2 Tracking TODO state changes
"you not only" -> "You not only"

7.1 Property syntax
"activate this changes." -> "activate this change."

7.5.2 Using column view
"modified values is" -> "modified value is"

8 Dates and times
"used as indicating" -> "used to indicate"

8.1 Timestamps, deadlines and scheduling
""That order depend" -> "That order depends"

8.3 Deadlines and scheduling
"a specific deadlines" -> "a specific deadline"
"task get scheduled" -> "task gets scheduled"

8.4 Clocking work time
"to that you can" -> "so that you can"

8.4.1 Clocking commands
"in inserts it" -> "and inserts it"

8.4.2 The Clock table
"and specify" -> "specifies"
"either absolute" -> "either absolutely"
"There options" -> "These options"

10.3.3 Matching tags and properties
"one of the tag" -> "one of the tags"
"Except the Special properties" -> "In addition to the Special
properties"

10.4.4 Filtering/limiting agenda items
"_fitlers_" -> "_filters_"
"Filter are" -> "Filters are"
"catogories" -> "categories"
"that as no effort" -> "that has no effort"

10.6.3 Setting options for custom commands
"an agenda commands" -> "an agenda command"

11 Markup for rich export
"like HTML, LaTeX" -> "like HTML and LaTeX"

Document title
"associated to buffer" -> "associated with the buffer"

11.8 Special blocks
"at a specific back-ends" -> "at a specific back-end"

12.11 Other built-in back-ends
"these export back-end" -> "these export back-ends"

15.3 Speed keys
"Speed keys do not only" -> "Speed keys not only"

15.4 Code evaluation and security issues
" work with the code snippets" -> "work with code snippets"

15.6 Summary of in-buffer settings
"any of those lines" -> "any of these lines"

Appendix A Hacking
"some aspects" -> "some areas"

A.4 Adding export back-ends
"or from deriving them" -> "or by deriving them"

A.8 Special agenda views
"the same than `agenda'" -> "the same as `agenda'"

A.9 Speeding up your agendas
"slowliness caused by accessing to" -> "slowdown caused by accessing"

Appendix B MobileOrg
"It does also allow" -> "It also allows"

B.1 Setting up the staging area
"consider to encrypt" -> "consider encrypting"

B.2 Pushing to MobileOrg
"same name than their" -> "same name as their"

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: Some documentation suggestions
  2013-10-13 17:01 Some documentation suggestions TonyMc
@ 2013-10-14  4:49 ` Noorul Islam K M
  2013-10-14  5:11 ` [PATCH] doc: Fix grammar and typo Noorul Islam K M
  2013-10-14  6:40 ` Some documentation suggestions Carsten Dominik
  2 siblings, 0 replies; 6+ messages in thread
From: Noorul Islam K M @ 2013-10-14  4:49 UTC (permalink / raw)
  To: TonyMc; +Cc: emacs-orgmode

TonyMc <afmcc@btinternet.com> writes:

> Dear Bastien et al,
>
> I have been reading through the Org manual (version 8.2.1) and have
> found a few errors of grammar or places where the English doesn't
> sound right.  I list them below with some suggested replacements
> (separated by ->).  I hope this is helpful.
>
> Best,
> Tony
>
> * 1.4 Feedback
> "If you re" -> "If you are"
>
> * 2.5 Structure Editing
> "level than" -> "level as" (twice)
>
> * 2.6 Sparse Trees
> "several commands creating" -> "several commands for creating"
>
> * 2.7 Plain Lists
> "theirs sub-items" -> "their sub-items"
>
> 3.1 Table editor
> "region to table" -> "region to a table"
>
> 3.5.1 References
> "one but last" -> "last but one"
>
> 3.5.4 Durations and time values
> "[HH:MM[:SS]" -> "HH:MM[:SS]"
>
> 3.5.5 Field and range formulas
> "column and rows" -> "columns and rows"
> "To avoid this from happening" -> "To prevent this from happening" or
> "To avoid this"
>
> 3.5.6 Column formulas
> "can not" -> "cannot"
>
> 4.2 Internal links
> "put the line" -> "put in the line"
>
> 4.6 Link abbreviations
> "text don't" -> "text doesn't"
>
> 5.2.3 Multiple keyword sets
> "S-<<right>>" -> "S-<right>"
>
> 5.3.2 Tracking TODO state changes
> "you not only" -> "You not only"
>
> 7.1 Property syntax
> "activate this changes." -> "activate this change."
>
> 7.5.2 Using column view
> "modified values is" -> "modified value is"
>
> 8 Dates and times
> "used as indicating" -> "used to indicate"
>
> 8.1 Timestamps, deadlines and scheduling
> ""That order depend" -> "That order depends"
>
> 8.3 Deadlines and scheduling
> "a specific deadlines" -> "a specific deadline"
> "task get scheduled" -> "task gets scheduled"
>
> 8.4 Clocking work time
> "to that you can" -> "so that you can"
>
> 8.4.1 Clocking commands
> "in inserts it" -> "and inserts it"
>
> 8.4.2 The Clock table
> "and specify" -> "specifies"
> "either absolute" -> "either absolutely"
> "There options" -> "These options"
>
> 10.3.3 Matching tags and properties
> "one of the tag" -> "one of the tags"
> "Except the Special properties" -> "In addition to the Special
> properties"
>
> 10.4.4 Filtering/limiting agenda items
> "_fitlers_" -> "_filters_"
> "Filter are" -> "Filters are"
> "catogories" -> "categories"
> "that as no effort" -> "that has no effort"
>
> 10.6.3 Setting options for custom commands
> "an agenda commands" -> "an agenda command"
>
> 11 Markup for rich export
> "like HTML, LaTeX" -> "like HTML and LaTeX"
>
> Document title
> "associated to buffer" -> "associated with the buffer"
>
> 11.8 Special blocks
> "at a specific back-ends" -> "at a specific back-end"
>
> 12.11 Other built-in back-ends
> "these export back-end" -> "these export back-ends"
>
> 15.3 Speed keys
> "Speed keys do not only" -> "Speed keys not only"
>
> 15.4 Code evaluation and security issues
> " work with the code snippets" -> "work with code snippets"
>
> 15.6 Summary of in-buffer settings
> "any of those lines" -> "any of these lines"
>
> Appendix A Hacking
> "some aspects" -> "some areas"
>
> A.4 Adding export back-ends
> "or from deriving them" -> "or by deriving them"
>
> A.8 Special agenda views
> "the same than `agenda'" -> "the same as `agenda'"
>
> A.9 Speeding up your agendas
> "slowliness caused by accessing to" -> "slowdown caused by accessing"
>
> Appendix B MobileOrg
> "It does also allow" -> "It also allows"
>
> B.1 Setting up the staging area
> "consider to encrypt" -> "consider encrypting"
>
> B.2 Pushing to MobileOrg
> "same name than their" -> "same name as their"

Thank you Tony!

I will submit a patch. Right now working on this.

Thanks and Regards
Noorul

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH] doc: Fix grammar and typo
  2013-10-13 17:01 Some documentation suggestions TonyMc
  2013-10-14  4:49 ` Noorul Islam K M
@ 2013-10-14  5:11 ` Noorul Islam K M
  2013-10-14  6:42   ` Carsten Dominik
  2013-10-14  6:40 ` Some documentation suggestions Carsten Dominik
  2 siblings, 1 reply; 6+ messages in thread
From: Noorul Islam K M @ 2013-10-14  5:11 UTC (permalink / raw)
  To: TonyMc; +Cc: emacs-orgmode


* doc/org.texi: Fix grammar and typo.

Based on the patch proposed by TonyMc
---
 doc/org.texi |  109 +++++++++++++++++++++++++++++-----------------------------
 1 file changed, 55 insertions(+), 54 deletions(-)

diff --git a/doc/org.texi b/doc/org.texi
index 0271d70..a202af8 100644
--- a/doc/org.texi
+++ b/doc/org.texi
@@ -1011,7 +1011,7 @@ version information of Emacs (@kbd{M-x emacs-version @key{RET}}) and Org
 @kbd{M-x org-submit-bug-report RET}
 @end example
 @noindent which will put all this information into an Emacs mail buffer so
-that you only need to add your description.  If you re not sending the Email
+that you only need to add your description.  If you are not sending the Email
 from within Emacs, please copy and paste the content into your Email program.
 
 Sometimes you might face a problem due to an error in your Emacs or Org mode
@@ -1426,7 +1426,7 @@ See also the option @code{org-goto-interface}.
 @table @asis
 @orgcmd{M-@key{RET},org-insert-heading}
 @vindex org-M-RET-may-split-line
-Insert a new heading/item with the same level than the one at point.
+Insert a new heading/item with the same level as the one at point.
 If the cursor is in a plain list item, a new item is created
 (@pxref{Plain lists}).  To prevent this behavior in lists, call the
 command with a prefix argument.  When this command is used in the
@@ -1476,7 +1476,7 @@ of the one just marked.  E.g., hitting @key{M-h} on a paragraph will mark it,
 hitting @key{M-h} immediately again will mark the next one.
 @orgcmd{C-c @@,org-mark-subtree}
 Mark the subtree at point.  Hitting repeatedly will mark subsequent subtrees
-of the same level than the marked subtree.
+of the same level as the marked subtree.
 @orgcmd{C-c C-x C-w,org-cut-subtree}
 Kill subtree, i.e., remove it from buffer but save in kill ring.
 With a numeric prefix argument N, kill N sequential subtrees.
@@ -1567,7 +1567,7 @@ variables @code{org-show-hierarchy-above}, @code{org-show-following-heading},
 control on how much context is shown around each match.}.  Just try it out
 and you will see immediately how it works.
 
-Org mode contains several commands creating such trees, all these
+Org mode contains several commands for creating such trees, all these
 commands can be accessed through a dispatcher:
 
 @table @asis
@@ -1707,7 +1707,7 @@ blocks can be indented to signal that they belong to a particular item.
 If you find that using a different bullet for a sub-list (than that used for
 the current list-level) improves readability, customize the variable
 @code{org-list-demote-modify-bullet}.  To get a greater difference of
-indentation between items and theirs sub-items, customize
+indentation between items and their sub-items, customize
 @code{org-list-indent-offset}.
 
 @vindex org-list-automatic-rules
@@ -2133,7 +2133,7 @@ unpredictable for you, configure the options
 @table @kbd
 @tsubheading{Creation and conversion}
 @orgcmd{C-c |,org-table-create-or-convert-from-region}
-Convert the active region to table.  If every line contains at least one
+Convert the active region to a table.  If every line contains at least one
 TAB character, the function assumes that the material is tab separated.
 If every line contains a comma, comma-separated values (CSV) are assumed.
 If not, lines are split at whitespace into fields.  You can use a prefix
@@ -2533,7 +2533,7 @@ format at least for the first field (i.e the reference must start with
 @example
 $1..$3        @r{first three fields in the current row}
 $P..$Q        @r{range, using column names (see under Advanced)}
-$<<<..$>>     @r{start in third column, continue to the one but last}
+$<<<..$>>     @r{start in third column, continue to the last but one}
 @@2$1..@@4$3    @r{6 fields between these two fields (same as @code{A2..C4})}
 @@-1$-2..@@-1   @r{3 fields in the row above, starting from 2 columns on the left}
 @@I..II        @r{between first and second hline, short for @code{@@I..@@II}}
@@ -2794,7 +2794,7 @@ formulas or Elisp formulas:
 @end group
 @end example
 
-Input duration values must be of the form @code{[HH:MM[:SS]}, where seconds
+Input duration values must be of the form @code{HH:MM[:SS]}, where seconds
 are optional.  With the @code{T} flag, computed durations will be displayed
 as @code{HH:MM:SS} (see the first formula above).  With the @code{t} flag,
 computed durations will be displayed according to the value of the option
@@ -2822,9 +2822,9 @@ current field will be replaced with the result.
 Formulas are stored in a special line starting with @samp{#+TBLFM:} directly
 below the table.  If you type the equation in the 4th field of the 3rd data
 line in the table, the formula will look like @samp{@@3$4=$1+$2}.  When
-inserting/deleting/swapping column and rows with the appropriate commands,
+inserting/deleting/swapping columns and rows with the appropriate commands,
 @i{absolute references} (but not relative ones) in stored formulas are
-modified in order to still reference the same field.  To avoid this from
+modified in order to still reference the same field.  To prevent this from
 happening, in particular in range references, anchor ranges at the table
 borders (using @code{@@<}, @code{@@>}, @code{$<}, @code{$>}), or at hlines
 using the @code{@@I} notation.  Automatic adaptation of field references does
@@ -2885,7 +2885,7 @@ and the current field replaced with the result.  If the field contains only
 @samp{=}, the previously stored formula for this column is used.  For each
 column, Org will only remember the most recently used formula.  In the
 @samp{#+TBLFM:} line, column formulas will look like @samp{$4=$1+$2}.  The
-left-hand side of a column formula can not be the name of column, it must be
+left-hand side of a column formula cannot be the name of column, it must be
 the numeric column reference or @code{$>}.
 
 Instead of typing an equation into the field, you may also use the
@@ -3396,8 +3396,8 @@ a @i{dedicated target}: the same string in double angular brackets, like
 @cindex #+NAME
 If no dedicated target exists, the link will then try to match the exact name
 of an element within the buffer.  Naming is done with the @code{#+NAME}
-keyword, which has to be put the line before the element it refers to, as in
-the following example
+keyword, which has to be put in the line before the element it refers to, as
+in the following example
 
 @example
 #+NAME: My Target
@@ -3807,7 +3807,7 @@ url-encode the tag (see the example above, where we need to encode
 the URL parameter.)  Using @samp{%(my-function)} will pass the tag
 to a custom function, and replace it by the resulting string.
 
-If the replacement text don't contain any specifier, it will simply
+If the replacement text doesn't contain any specifier, it will simply
 be appended to the string in order to create the link.
 
 Instead of a string, you may also specify a function that will be
@@ -4141,8 +4141,8 @@ These keys jump from one TODO subset to the next.  In the above example,
 @kindex S-@key{left}
 @item S-@key{right}
 @itemx S-@key{left}
-@kbd{S-@key{<left>}} and @kbd{S-@key{<right>}} and walk through @emph{all}
-keywords from all sets, so for example @kbd{S-@key{<right>}} would switch
+@kbd{S-@key{left}} and @kbd{S-@key{right}} and walk through @emph{all}
+keywords from all sets, so for example @kbd{S-@key{right}} would switch
 from @code{DONE} to @code{REPORT} in the example above.  See also
 @ref{Conflicts}, for a discussion of the interaction with
 @code{shift-selection-mode}.
@@ -4401,7 +4401,7 @@ To record a timestamp without a note for TODO keywords configured with
 
 @noindent
 @vindex org-log-done
-you not only define global TODO keywords and fast access keys, but also
+You not only define global TODO keywords and fast access keys, but also
 request that a time is recorded when the entry is set to
 DONE@footnote{It is possible that Org mode will record two timestamps
 when you are using both @code{org-log-done} and state change logging.
@@ -5192,7 +5192,7 @@ file, use a line like
 @end example
 
 Contrary to properties set from a special drawer, you have to refresh the
-buffer with @kbd{C-c C-c} to activate this changes.
+buffer with @kbd{C-c C-c} to activate this change.
 
 If you want to add to the value of an existing property, append a @code{+} to
 the property name.  The following results in the property @code{var} having
@@ -5594,7 +5594,7 @@ View the full value of this property.  This is useful if the width of
 the column is smaller than that of the value.
 @orgcmd{a,org-columns-edit-allowed}
 Edit the list of allowed values for this property.  If the list is found
-in the hierarchy, the modified values is stored there.  If no list is
+in the hierarchy, the modified value is stored there.  If no list is
 found, the new value is stored in the first entry that is part of the
 current column view.
 @tsubheading{Modifying the table structure}
@@ -5703,7 +5703,7 @@ property API}.
 To assist project planning, TODO items can be labeled with a date and/or
 a time.  The specially formatted string carrying the date and time
 information is called a @emph{timestamp} in Org mode.  This may be a
-little confusing because timestamp is often used as indicating when
+little confusing because timestamp is often used to indicate when
 something was created or last changed.  However, in Org mode this term
 is used in a much wider sense.
 
@@ -5769,7 +5769,7 @@ following will show up in the agenda every Wednesday:
 For more complex date specifications, Org mode supports using the special
 sexp diary entries implemented in the Emacs calendar/diary
 package@footnote{When working with the standard diary sexp functions, you
-need to be very careful with the order of the arguments.  That order depend
+need to be very careful with the order of the arguments.  That order depends
 evilly on the variable @code{calendar-date-style} (or, for older Emacs
 versions, @code{european-calendar-style}).  For example, to specify a date
 December 12, 2005, the call might look like @code{(diary-date 12 1 2005)} or
@@ -6084,9 +6084,9 @@ until the entry is marked DONE@.  An example:
 @end example
 
 You can specify a different lead time for warnings for a specific
-deadlines using the following syntax.  Here is an example with a warning
+deadline using the following syntax.  Here is an example with a warning
 period of 5 days @code{DEADLINE: <2004-02-29 Sun -5d>}.  This warning is
-deactivated if the task get scheduled and you set
+deactivated if the task gets scheduled and you set
 @code{org-agenda-skip-deadline-prewarning-if-scheduled} to @code{t}.
 
 @item SCHEDULED
@@ -6305,7 +6305,7 @@ stopped and the corresponding time interval is recorded.  It also computes
 the total time spent on each subtree@footnote{Clocking only works if all
 headings are indented with less than 30 stars.  This is a hardcoded
 limitation of `lmax' in `org-clock-sum'.} of a project.  And it remembers a
-history or tasks recently clocked, to that you can jump quickly between a
+history or tasks recently clocked, so that you can jump quickly between a
 number of tasks absorbing your time.
 
 To save the clock history across Emacs sessions, use
@@ -6370,7 +6370,7 @@ mode line entry will pop up a menu with clocking options.
 @vindex org-log-note-clock-out
 Stop the clock (clock-out).  This inserts another timestamp at the same
 location where the clock was last started.  It also directly computes
-the resulting time in inserts it after the time range as @samp{=>
+the resulting time and inserts it after the time range as @samp{=>
 HH:MM}.  See the variable @code{org-log-note-clock-out} for the
 possibility to record an additional note together with the clock-out
 timestamp@footnote{The corresponding in-buffer setting is:
@@ -6465,7 +6465,7 @@ buffer with the @kbd{C-c C-x C-r} command:
 @end example
 @noindent
 @vindex org-clocktable-defaults
-The @samp{BEGIN} line and specify a number of options to define the scope,
+The @samp{BEGIN} line specifies a number of options to define the scope,
 structure, and formatting of the report.  Defaults for all these options can
 be configured in the variable @code{org-clocktable-defaults}.
 
@@ -6514,7 +6514,7 @@ be selected:
              @r{@ref{Matching tags and properties} for the match syntax.}
 @end example
 
-Then there are options which determine the formatting of the table.  There
+Then there are options which determine the formatting of the table.  These
 options are interpreted by the function @code{org-clocktable-write-default},
 but you can specify your own function using the @code{:formatter} parameter.
 @example
@@ -8040,7 +8040,7 @@ Group tags (@pxref{Tag groups}) are expanded as regular expressions.  E.g.,
 if @samp{:work:} is a group tag for the group @samp{:work:lab:conf:}, then
 searching for @samp{work} will search for @samp{@{\(?:work\|lab\|conf\)@}}
 and searching for @samp{-work} will search for all headlines but those with
-one of the tag in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}).
+one of the tags in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}).
 
 @cindex TODO keyword matching, with tags search
 @cindex level, require for tags/property match
@@ -8055,8 +8055,8 @@ the entry.  The ITEM special property cannot currently be used in tags/property
 searches@footnote{But @pxref{x-agenda-skip-entry-regexp,
 ,skipping entries based on regexp}.}.
 
-Except the @pxref{Special properties}, one other ``property'' can also be
-used. @code{LEVEL} represents the level of an entry.  So a search
+In addition to the @pxref{Special properties}, one other ``property'' can
+also be used. @code{LEVEL} represents the level of an entry.  So a search
 @samp{+LEVEL=3+boss-TODO="DONE"} lists all level three headlines that have
 the tag @samp{boss} and are @emph{not} marked with the TODO keyword DONE@.
 In buffers with @code{org-odd-levels-only} set, @samp{LEVEL} does not count
@@ -8391,10 +8391,11 @@ the estimated effort of an entry (@pxref{Effort estimates}).
 
 Agenda built-in or customized commands are statically defined.  Agenda
 filters and limits provide two ways of dynamically narrowing down the list of
-agenda entries: @emph{fitlers} and @emph{limits}.  Filters only act on the
+agenda entries: @emph{filters} and @emph{limits}.  Filters only act on the
 display of the items, while limits take effect before the list of agenda
-entries is built.  Filter are more often used interactively, while limits are
-mostly useful when defined as local variables within custom agenda commands.
+entries is built.  Filters are more often used interactively, while limits
+are mostly useful when defined as local variables within custom agenda
+commands.
 
 @subsubheading Filtering in the agenda
 @cindex filtering, by tag, category, top headline and effort, in agenda
@@ -8542,8 +8543,8 @@ Limit the number of tagged entries.
 @end table
 
 When set to a positive integer, each option will exclude entries from other
-catogories: for example, @code{(setq org-agenda-max-effort 100)} will limit
-the agenda to 100 minutes of effort and exclude any entry that as no effort
+categories: for example, @code{(setq org-agenda-max-effort 100)} will limit
+the agenda to 100 minutes of effort and exclude any entry that has no effort
 property.  If you want to include entries with no effort property, use a
 negative value for @code{org-agenda-max-effort}.
 
@@ -9313,7 +9314,7 @@ yourself.
 @vindex org-agenda-custom-commands-contexts
 To control whether an agenda command should be accessible from a specific
 context, you can customize @code{org-agenda-custom-commands-contexts}.  Let's
-say for example that you have an agenda commands @code{"o"} displaying a view
+say for example that you have an agenda command @code{"o"} displaying a view
 that you only need when reading emails.  Then you would configure this option
 like this:
 
@@ -9540,9 +9541,9 @@ spent (via @code{CLOCKSUM}) and with the planned total effort for it.
 
 When exporting Org mode documents, the exporter tries to reflect the
 structure of the document as accurately as possible in the back-end.  Since
-export targets like HTML, @LaTeX{} allow much richer formatting, Org mode has
-rules on how to prepare text for rich export.  This section summarizes the
-markup rules used in an Org mode buffer.
+export targets like HTML and @LaTeX{} allow much richer formatting, Org mode
+has rules on how to prepare text for rich export.  This section summarizes
+the markup rules used in an Org mode buffer.
 
 @menu
 * Structural markup elements::  The basic structure as seen by the exporter
@@ -9584,7 +9585,7 @@ The title of the exported document is taken from the special line
 
 @noindent
 If this line does not exist, the title will be the name of the file
-associated to buffer, without extension, or the buffer name.
+associated with the buffer, without extension, or the buffer name.
 
 @cindex property, EXPORT_TITLE
 If you are exporting only a subtree, its heading will become the title of the
@@ -10307,7 +10308,7 @@ is normal.
 
 Org syntax includes pre-defined blocks (@pxref{Paragraphs} and @ref{Literal
 examples}).  It is also possible to create blocks containing raw code
-targeted at a specific back-ends (e.g., @samp{#+BEGIN_LATEX}).
+targeted at a specific back-end (e.g., @samp{#+BEGIN_LATEX}).
 
 Any other block is a @emph{special block}.  Each export back-end decides if
 they should be exported, and how.  When the block is ignored, its contents
@@ -15728,7 +15729,7 @@ Single keys can be made to execute commands when the cursor is at the
 beginning of a headline, i.e., before the first star.  Configure the variable
 @code{org-use-speed-commands} to activate this feature.  There is a
 pre-defined list of commands, and you can add more such commands using the
-variable @code{org-speed-commands-user}.  Speed keys do not only speed up
+variable @code{org-speed-commands-user}.  Speed keys not only speed up
 navigation and other commands, but they also provide an alternative way to
 execute commands bound to keys that are not or not easily available on a TTY,
 or on a small mobile device with a limited keyboard.
@@ -15739,7 +15740,7 @@ with the cursor at the beginning of a headline.
 @node Code evaluation security
 @section Code evaluation and security issues
 
-Org provides tools to work with the code snippets, including evaluating them.
+Org provides tools to work with code snippets, including evaluating them.
 
 Running code on your machine always comes with a security risk.  Badly
 written or malicious code can be executed on purpose or by accident.  Org has
@@ -15821,7 +15822,7 @@ per-file basis.  These lines start with a @samp{#+} followed by a
 keyword, a colon, and then individual words defining a setting.  Several
 setting words can be in the same line, but you can also have multiple
 lines for the keyword.  While these settings are described throughout
-the manual, here is a summary.  After changing any of those lines in the
+the manual, here is a summary.  After changing any of these lines in the
 buffer, press @kbd{C-c C-c} with the cursor still in the line to
 activate the changes immediately.  Otherwise they become effective only
 when the file is visited again in a new Emacs session.
@@ -16606,7 +16607,7 @@ being encrypted again.
 @appendix Hacking
 @cindex hacking
 
-This appendix covers some aspects where users can extend the functionality of
+This appendix covers some areas where users can extend the functionality of
 Org.
 
 @menu
@@ -16754,8 +16755,8 @@ not accept any arguments, and return the full link with prefix.
 @cindex Export, writing back-ends
 
 Org 8.0 comes with a completely rewritten export engine which makes it easy
-to write new export back-ends, either from scratch, or from deriving them
-from existing ones.
+to write new export back-ends, either from scratch, or by deriving them from
+existing ones.
 
 Your two entry points are respectively @code{org-export-define-backend} and
 @code{org-export-define-derived-backend}.  To grok these functions, you
@@ -17225,7 +17226,7 @@ other block) with @code{org-narrow-to-block}.
 @vindex org-agenda-skip-function-global
 Org provides a special hook that can be used to narrow down the selection
 made by these agenda views: @code{agenda}, @code{agenda*}@footnote{The
-@code{agenda*} view is the same than @code{agenda} except that it only
+@code{agenda*} view is the same as @code{agenda} except that it only
 considers @emph{appointments}, i.e., scheduled and deadline items that have a
 time specification @code{[h]h:mm} in their time-stamps.}, @code{todo},
 @code{alltodo}, @code{tags}, @code{tags-todo}, @code{tags-tree}.  You may
@@ -17331,7 +17332,7 @@ to become slow.  Below are some tips on how to speed up the agenda commands.
 
 @enumerate
 @item
-Reduce the number of Org agenda files: this will reduce the slowliness caused
+Reduce the number of Org agenda files: this will reduce the slowdown caused
 by accessing to a hard drive.
 @item
 Reduce the number of DONE and archived headlines: this way the agenda does
@@ -17665,7 +17666,7 @@ The following example counts the number of entries with TODO keyword
 @i{MobileOrg} is the name of the mobile companion app for Org mode, currently
 available for iOS and for Android.  @i{MobileOrg} offers offline viewing and
 capture support for an Org mode system rooted on a ``real'' computer.  It
-does also allow you to record changes to existing entries.  The
+also allows you to record changes to existing entries.  The
 @uref{https://github.com/MobileOrg/, iOS implementation} for the
 @i{iPhone/iPod Touch/iPad} series of devices, was started by Richard Moreland
 and is now in the hands Sean Escriva.  Android users should check out
@@ -17694,9 +17695,9 @@ in-buffer settings, but it will understand the logistics of TODO state
 @node Setting up the staging area
 @section Setting up the staging area
 
-MobileOrg needs to interact with Emacs through a directory on a server.  If you
-are using a public server, you should consider to encrypt the files that are
-uploaded to the server.  This can be done with Org mode 7.02 and with
+MobileOrg needs to interact with Emacs through a directory on a server.  If
+you are using a public server, you should consider encrypting the files that
+are uploaded to the server.  This can be done with Org mode 7.02 and with
 @i{MobileOrg 1.5} (iPhone version), and you need an @file{openssl}
 installation on your system.  To turn on encryption, set a password in
 @i{MobileOrg} and, on the Emacs side, configure the variable
@@ -17731,7 +17732,7 @@ all agenda files (as listed in @code{org-agenda-files}), but additional files
 can be included by customizing @code{org-mobile-files}.  File names will be
 staged with paths relative to @code{org-directory}, so all files should be
 inside this directory@footnote{Symbolic links in @code{org-directory} need to
-have the same name than their targets.}.
+have the same name as their targets.}.
 
 The push operation also creates a special Org file @file{agendas.org} with
 all custom agenda view defined by the user@footnote{While creating the
-- 
1.7.10.4

^ permalink raw reply related	[flat|nested] 6+ messages in thread

* Re: Some documentation suggestions
  2013-10-13 17:01 Some documentation suggestions TonyMc
  2013-10-14  4:49 ` Noorul Islam K M
  2013-10-14  5:11 ` [PATCH] doc: Fix grammar and typo Noorul Islam K M
@ 2013-10-14  6:40 ` Carsten Dominik
  2 siblings, 0 replies; 6+ messages in thread
From: Carsten Dominik @ 2013-10-14  6:40 UTC (permalink / raw)
  To: TonyMc; +Cc: emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 3667 bytes --]

Thank you Tony,

I have applied these.

- Carsten

On 13.10.2013, at 19:01, TonyMc <afmcc@btinternet.com> wrote:

> Dear Bastien et al,
> 
> I have been reading through the Org manual (version 8.2.1) and have
> found a few errors of grammar or places where the English doesn't
> sound right.  I list them below with some suggested replacements
> (separated by ->).  I hope this is helpful.
> 
> Best,
> Tony
> 
> * 1.4 Feedback
> "If you re" -> "If you are"
> 
> * 2.5 Structure Editing
> "level than" -> "level as" (twice)
> 
> * 2.6 Sparse Trees
> "several commands creating" -> "several commands for creating"
> 
> * 2.7 Plain Lists
> "theirs sub-items" -> "their sub-items"
> 
> 3.1 Table editor
> "region to table" -> "region to a table"
> 
> 3.5.1 References
> "one but last" -> "last but one"
> 
> 3.5.4 Durations and time values
> "[HH:MM[:SS]" -> "HH:MM[:SS]"
> 
> 3.5.5 Field and range formulas
> "column and rows" -> "columns and rows"
> "To avoid this from happening" -> "To prevent this from happening" or
> "To avoid this"
> 
> 3.5.6 Column formulas
> "can not" -> "cannot"
> 
> 4.2 Internal links
> "put the line" -> "put in the line"
> 
> 4.6 Link abbreviations
> "text don't" -> "text doesn't"
> 
> 5.2.3 Multiple keyword sets
> "S-<<right>>" -> "S-<right>"
> 
> 5.3.2 Tracking TODO state changes
> "you not only" -> "You not only"
> 
> 7.1 Property syntax
> "activate this changes." -> "activate this change."
> 
> 7.5.2 Using column view
> "modified values is" -> "modified value is"
> 
> 8 Dates and times
> "used as indicating" -> "used to indicate"
> 
> 8.1 Timestamps, deadlines and scheduling
> ""That order depend" -> "That order depends"
> 
> 8.3 Deadlines and scheduling
> "a specific deadlines" -> "a specific deadline"
> "task get scheduled" -> "task gets scheduled"
> 
> 8.4 Clocking work time
> "to that you can" -> "so that you can"
> 
> 8.4.1 Clocking commands
> "in inserts it" -> "and inserts it"
> 
> 8.4.2 The Clock table
> "and specify" -> "specifies"
> "either absolute" -> "either absolutely"
> "There options" -> "These options"
> 
> 10.3.3 Matching tags and properties
> "one of the tag" -> "one of the tags"
> "Except the Special properties" -> "In addition to the Special
> properties"
> 
> 10.4.4 Filtering/limiting agenda items
> "_fitlers_" -> "_filters_"
> "Filter are" -> "Filters are"
> "catogories" -> "categories"
> "that as no effort" -> "that has no effort"
> 
> 10.6.3 Setting options for custom commands
> "an agenda commands" -> "an agenda command"
> 
> 11 Markup for rich export
> "like HTML, LaTeX" -> "like HTML and LaTeX"
> 
> Document title
> "associated to buffer" -> "associated with the buffer"
> 
> 11.8 Special blocks
> "at a specific back-ends" -> "at a specific back-end"
> 
> 12.11 Other built-in back-ends
> "these export back-end" -> "these export back-ends"
> 
> 15.3 Speed keys
> "Speed keys do not only" -> "Speed keys not only"
> 
> 15.4 Code evaluation and security issues
> " work with the code snippets" -> "work with code snippets"
> 
> 15.6 Summary of in-buffer settings
> "any of those lines" -> "any of these lines"
> 
> Appendix A Hacking
> "some aspects" -> "some areas"
> 
> A.4 Adding export back-ends
> "or from deriving them" -> "or by deriving them"
> 
> A.8 Special agenda views
> "the same than `agenda'" -> "the same as `agenda'"
> 
> A.9 Speeding up your agendas
> "slowliness caused by accessing to" -> "slowdown caused by accessing"
> 
> Appendix B MobileOrg
> "It does also allow" -> "It also allows"
> 
> B.1 Setting up the staging area
> "consider to encrypt" -> "consider encrypting"
> 
> B.2 Pushing to MobileOrg
> "same name than their" -> "same name as their"
> 


[-- Attachment #2: Message signed with OpenPGP using GPGMail --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] doc: Fix grammar and typo
  2013-10-14  5:11 ` [PATCH] doc: Fix grammar and typo Noorul Islam K M
@ 2013-10-14  6:42   ` Carsten Dominik
  2013-10-14  7:28     ` Noorul Islam Kamal Malmiyoda
  0 siblings, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2013-10-14  6:42 UTC (permalink / raw)
  To: Noorul Islam K M; +Cc: TonyMc, emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 24358 bytes --]

Noorul,

thank you very much for this service!
A few minutes to late, I did this on my train ride.

- Carsten

On 14.10.2013, at 07:11, Noorul Islam K M <noorul@noorul.com> wrote:

> 
> * doc/org.texi: Fix grammar and typo.
> 
> Based on the patch proposed by TonyMc
> ---
> doc/org.texi |  109 +++++++++++++++++++++++++++++-----------------------------
> 1 file changed, 55 insertions(+), 54 deletions(-)
> 
> diff --git a/doc/org.texi b/doc/org.texi
> index 0271d70..a202af8 100644
> --- a/doc/org.texi
> +++ b/doc/org.texi
> @@ -1011,7 +1011,7 @@ version information of Emacs (@kbd{M-x emacs-version @key{RET}}) and Org
> @kbd{M-x org-submit-bug-report RET}
> @end example
> @noindent which will put all this information into an Emacs mail buffer so
> -that you only need to add your description.  If you re not sending the Email
> +that you only need to add your description.  If you are not sending the Email
> from within Emacs, please copy and paste the content into your Email program.
> 
> Sometimes you might face a problem due to an error in your Emacs or Org mode
> @@ -1426,7 +1426,7 @@ See also the option @code{org-goto-interface}.
> @table @asis
> @orgcmd{M-@key{RET},org-insert-heading}
> @vindex org-M-RET-may-split-line
> -Insert a new heading/item with the same level than the one at point.
> +Insert a new heading/item with the same level as the one at point.
> If the cursor is in a plain list item, a new item is created
> (@pxref{Plain lists}).  To prevent this behavior in lists, call the
> command with a prefix argument.  When this command is used in the
> @@ -1476,7 +1476,7 @@ of the one just marked.  E.g., hitting @key{M-h} on a paragraph will mark it,
> hitting @key{M-h} immediately again will mark the next one.
> @orgcmd{C-c @@,org-mark-subtree}
> Mark the subtree at point.  Hitting repeatedly will mark subsequent subtrees
> -of the same level than the marked subtree.
> +of the same level as the marked subtree.
> @orgcmd{C-c C-x C-w,org-cut-subtree}
> Kill subtree, i.e., remove it from buffer but save in kill ring.
> With a numeric prefix argument N, kill N sequential subtrees.
> @@ -1567,7 +1567,7 @@ variables @code{org-show-hierarchy-above}, @code{org-show-following-heading},
> control on how much context is shown around each match.}.  Just try it out
> and you will see immediately how it works.
> 
> -Org mode contains several commands creating such trees, all these
> +Org mode contains several commands for creating such trees, all these
> commands can be accessed through a dispatcher:
> 
> @table @asis
> @@ -1707,7 +1707,7 @@ blocks can be indented to signal that they belong to a particular item.
> If you find that using a different bullet for a sub-list (than that used for
> the current list-level) improves readability, customize the variable
> @code{org-list-demote-modify-bullet}.  To get a greater difference of
> -indentation between items and theirs sub-items, customize
> +indentation between items and their sub-items, customize
> @code{org-list-indent-offset}.
> 
> @vindex org-list-automatic-rules
> @@ -2133,7 +2133,7 @@ unpredictable for you, configure the options
> @table @kbd
> @tsubheading{Creation and conversion}
> @orgcmd{C-c |,org-table-create-or-convert-from-region}
> -Convert the active region to table.  If every line contains at least one
> +Convert the active region to a table.  If every line contains at least one
> TAB character, the function assumes that the material is tab separated.
> If every line contains a comma, comma-separated values (CSV) are assumed.
> If not, lines are split at whitespace into fields.  You can use a prefix
> @@ -2533,7 +2533,7 @@ format at least for the first field (i.e the reference must start with
> @example
> $1..$3        @r{first three fields in the current row}
> $P..$Q        @r{range, using column names (see under Advanced)}
> -$<<<..$>>     @r{start in third column, continue to the one but last}
> +$<<<..$>>     @r{start in third column, continue to the last but one}
> @@2$1..@@4$3    @r{6 fields between these two fields (same as @code{A2..C4})}
> @@-1$-2..@@-1   @r{3 fields in the row above, starting from 2 columns on the left}
> @@I..II        @r{between first and second hline, short for @code{@@I..@@II}}
> @@ -2794,7 +2794,7 @@ formulas or Elisp formulas:
> @end group
> @end example
> 
> -Input duration values must be of the form @code{[HH:MM[:SS]}, where seconds
> +Input duration values must be of the form @code{HH:MM[:SS]}, where seconds
> are optional.  With the @code{T} flag, computed durations will be displayed
> as @code{HH:MM:SS} (see the first formula above).  With the @code{t} flag,
> computed durations will be displayed according to the value of the option
> @@ -2822,9 +2822,9 @@ current field will be replaced with the result.
> Formulas are stored in a special line starting with @samp{#+TBLFM:} directly
> below the table.  If you type the equation in the 4th field of the 3rd data
> line in the table, the formula will look like @samp{@@3$4=$1+$2}.  When
> -inserting/deleting/swapping column and rows with the appropriate commands,
> +inserting/deleting/swapping columns and rows with the appropriate commands,
> @i{absolute references} (but not relative ones) in stored formulas are
> -modified in order to still reference the same field.  To avoid this from
> +modified in order to still reference the same field.  To prevent this from
> happening, in particular in range references, anchor ranges at the table
> borders (using @code{@@<}, @code{@@>}, @code{$<}, @code{$>}), or at hlines
> using the @code{@@I} notation.  Automatic adaptation of field references does
> @@ -2885,7 +2885,7 @@ and the current field replaced with the result.  If the field contains only
> @samp{=}, the previously stored formula for this column is used.  For each
> column, Org will only remember the most recently used formula.  In the
> @samp{#+TBLFM:} line, column formulas will look like @samp{$4=$1+$2}.  The
> -left-hand side of a column formula can not be the name of column, it must be
> +left-hand side of a column formula cannot be the name of column, it must be
> the numeric column reference or @code{$>}.
> 
> Instead of typing an equation into the field, you may also use the
> @@ -3396,8 +3396,8 @@ a @i{dedicated target}: the same string in double angular brackets, like
> @cindex #+NAME
> If no dedicated target exists, the link will then try to match the exact name
> of an element within the buffer.  Naming is done with the @code{#+NAME}
> -keyword, which has to be put the line before the element it refers to, as in
> -the following example
> +keyword, which has to be put in the line before the element it refers to, as
> +in the following example
> 
> @example
> #+NAME: My Target
> @@ -3807,7 +3807,7 @@ url-encode the tag (see the example above, where we need to encode
> the URL parameter.)  Using @samp{%(my-function)} will pass the tag
> to a custom function, and replace it by the resulting string.
> 
> -If the replacement text don't contain any specifier, it will simply
> +If the replacement text doesn't contain any specifier, it will simply
> be appended to the string in order to create the link.
> 
> Instead of a string, you may also specify a function that will be
> @@ -4141,8 +4141,8 @@ These keys jump from one TODO subset to the next.  In the above example,
> @kindex S-@key{left}
> @item S-@key{right}
> @itemx S-@key{left}
> -@kbd{S-@key{<left>}} and @kbd{S-@key{<right>}} and walk through @emph{all}
> -keywords from all sets, so for example @kbd{S-@key{<right>}} would switch
> +@kbd{S-@key{left}} and @kbd{S-@key{right}} and walk through @emph{all}
> +keywords from all sets, so for example @kbd{S-@key{right}} would switch
> from @code{DONE} to @code{REPORT} in the example above.  See also
> @ref{Conflicts}, for a discussion of the interaction with
> @code{shift-selection-mode}.
> @@ -4401,7 +4401,7 @@ To record a timestamp without a note for TODO keywords configured with
> 
> @noindent
> @vindex org-log-done
> -you not only define global TODO keywords and fast access keys, but also
> +You not only define global TODO keywords and fast access keys, but also
> request that a time is recorded when the entry is set to
> DONE@footnote{It is possible that Org mode will record two timestamps
> when you are using both @code{org-log-done} and state change logging.
> @@ -5192,7 +5192,7 @@ file, use a line like
> @end example
> 
> Contrary to properties set from a special drawer, you have to refresh the
> -buffer with @kbd{C-c C-c} to activate this changes.
> +buffer with @kbd{C-c C-c} to activate this change.
> 
> If you want to add to the value of an existing property, append a @code{+} to
> the property name.  The following results in the property @code{var} having
> @@ -5594,7 +5594,7 @@ View the full value of this property.  This is useful if the width of
> the column is smaller than that of the value.
> @orgcmd{a,org-columns-edit-allowed}
> Edit the list of allowed values for this property.  If the list is found
> -in the hierarchy, the modified values is stored there.  If no list is
> +in the hierarchy, the modified value is stored there.  If no list is
> found, the new value is stored in the first entry that is part of the
> current column view.
> @tsubheading{Modifying the table structure}
> @@ -5703,7 +5703,7 @@ property API}.
> To assist project planning, TODO items can be labeled with a date and/or
> a time.  The specially formatted string carrying the date and time
> information is called a @emph{timestamp} in Org mode.  This may be a
> -little confusing because timestamp is often used as indicating when
> +little confusing because timestamp is often used to indicate when
> something was created or last changed.  However, in Org mode this term
> is used in a much wider sense.
> 
> @@ -5769,7 +5769,7 @@ following will show up in the agenda every Wednesday:
> For more complex date specifications, Org mode supports using the special
> sexp diary entries implemented in the Emacs calendar/diary
> package@footnote{When working with the standard diary sexp functions, you
> -need to be very careful with the order of the arguments.  That order depend
> +need to be very careful with the order of the arguments.  That order depends
> evilly on the variable @code{calendar-date-style} (or, for older Emacs
> versions, @code{european-calendar-style}).  For example, to specify a date
> December 12, 2005, the call might look like @code{(diary-date 12 1 2005)} or
> @@ -6084,9 +6084,9 @@ until the entry is marked DONE@.  An example:
> @end example
> 
> You can specify a different lead time for warnings for a specific
> -deadlines using the following syntax.  Here is an example with a warning
> +deadline using the following syntax.  Here is an example with a warning
> period of 5 days @code{DEADLINE: <2004-02-29 Sun -5d>}.  This warning is
> -deactivated if the task get scheduled and you set
> +deactivated if the task gets scheduled and you set
> @code{org-agenda-skip-deadline-prewarning-if-scheduled} to @code{t}.
> 
> @item SCHEDULED
> @@ -6305,7 +6305,7 @@ stopped and the corresponding time interval is recorded.  It also computes
> the total time spent on each subtree@footnote{Clocking only works if all
> headings are indented with less than 30 stars.  This is a hardcoded
> limitation of `lmax' in `org-clock-sum'.} of a project.  And it remembers a
> -history or tasks recently clocked, to that you can jump quickly between a
> +history or tasks recently clocked, so that you can jump quickly between a
> number of tasks absorbing your time.
> 
> To save the clock history across Emacs sessions, use
> @@ -6370,7 +6370,7 @@ mode line entry will pop up a menu with clocking options.
> @vindex org-log-note-clock-out
> Stop the clock (clock-out).  This inserts another timestamp at the same
> location where the clock was last started.  It also directly computes
> -the resulting time in inserts it after the time range as @samp{=>
> +the resulting time and inserts it after the time range as @samp{=>
> HH:MM}.  See the variable @code{org-log-note-clock-out} for the
> possibility to record an additional note together with the clock-out
> timestamp@footnote{The corresponding in-buffer setting is:
> @@ -6465,7 +6465,7 @@ buffer with the @kbd{C-c C-x C-r} command:
> @end example
> @noindent
> @vindex org-clocktable-defaults
> -The @samp{BEGIN} line and specify a number of options to define the scope,
> +The @samp{BEGIN} line specifies a number of options to define the scope,
> structure, and formatting of the report.  Defaults for all these options can
> be configured in the variable @code{org-clocktable-defaults}.
> 
> @@ -6514,7 +6514,7 @@ be selected:
>              @r{@ref{Matching tags and properties} for the match syntax.}
> @end example
> 
> -Then there are options which determine the formatting of the table.  There
> +Then there are options which determine the formatting of the table.  These
> options are interpreted by the function @code{org-clocktable-write-default},
> but you can specify your own function using the @code{:formatter} parameter.
> @example
> @@ -8040,7 +8040,7 @@ Group tags (@pxref{Tag groups}) are expanded as regular expressions.  E.g.,
> if @samp{:work:} is a group tag for the group @samp{:work:lab:conf:}, then
> searching for @samp{work} will search for @samp{@{\(?:work\|lab\|conf\)@}}
> and searching for @samp{-work} will search for all headlines but those with
> -one of the tag in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}).
> +one of the tags in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}).
> 
> @cindex TODO keyword matching, with tags search
> @cindex level, require for tags/property match
> @@ -8055,8 +8055,8 @@ the entry.  The ITEM special property cannot currently be used in tags/property
> searches@footnote{But @pxref{x-agenda-skip-entry-regexp,
> ,skipping entries based on regexp}.}.
> 
> -Except the @pxref{Special properties}, one other ``property'' can also be
> -used. @code{LEVEL} represents the level of an entry.  So a search
> +In addition to the @pxref{Special properties}, one other ``property'' can
> +also be used. @code{LEVEL} represents the level of an entry.  So a search
> @samp{+LEVEL=3+boss-TODO="DONE"} lists all level three headlines that have
> the tag @samp{boss} and are @emph{not} marked with the TODO keyword DONE@.
> In buffers with @code{org-odd-levels-only} set, @samp{LEVEL} does not count
> @@ -8391,10 +8391,11 @@ the estimated effort of an entry (@pxref{Effort estimates}).
> 
> Agenda built-in or customized commands are statically defined.  Agenda
> filters and limits provide two ways of dynamically narrowing down the list of
> -agenda entries: @emph{fitlers} and @emph{limits}.  Filters only act on the
> +agenda entries: @emph{filters} and @emph{limits}.  Filters only act on the
> display of the items, while limits take effect before the list of agenda
> -entries is built.  Filter are more often used interactively, while limits are
> -mostly useful when defined as local variables within custom agenda commands.
> +entries is built.  Filters are more often used interactively, while limits
> +are mostly useful when defined as local variables within custom agenda
> +commands.
> 
> @subsubheading Filtering in the agenda
> @cindex filtering, by tag, category, top headline and effort, in agenda
> @@ -8542,8 +8543,8 @@ Limit the number of tagged entries.
> @end table
> 
> When set to a positive integer, each option will exclude entries from other
> -catogories: for example, @code{(setq org-agenda-max-effort 100)} will limit
> -the agenda to 100 minutes of effort and exclude any entry that as no effort
> +categories: for example, @code{(setq org-agenda-max-effort 100)} will limit
> +the agenda to 100 minutes of effort and exclude any entry that has no effort
> property.  If you want to include entries with no effort property, use a
> negative value for @code{org-agenda-max-effort}.
> 
> @@ -9313,7 +9314,7 @@ yourself.
> @vindex org-agenda-custom-commands-contexts
> To control whether an agenda command should be accessible from a specific
> context, you can customize @code{org-agenda-custom-commands-contexts}.  Let's
> -say for example that you have an agenda commands @code{"o"} displaying a view
> +say for example that you have an agenda command @code{"o"} displaying a view
> that you only need when reading emails.  Then you would configure this option
> like this:
> 
> @@ -9540,9 +9541,9 @@ spent (via @code{CLOCKSUM}) and with the planned total effort for it.
> 
> When exporting Org mode documents, the exporter tries to reflect the
> structure of the document as accurately as possible in the back-end.  Since
> -export targets like HTML, @LaTeX{} allow much richer formatting, Org mode has
> -rules on how to prepare text for rich export.  This section summarizes the
> -markup rules used in an Org mode buffer.
> +export targets like HTML and @LaTeX{} allow much richer formatting, Org mode
> +has rules on how to prepare text for rich export.  This section summarizes
> +the markup rules used in an Org mode buffer.
> 
> @menu
> * Structural markup elements::  The basic structure as seen by the exporter
> @@ -9584,7 +9585,7 @@ The title of the exported document is taken from the special line
> 
> @noindent
> If this line does not exist, the title will be the name of the file
> -associated to buffer, without extension, or the buffer name.
> +associated with the buffer, without extension, or the buffer name.
> 
> @cindex property, EXPORT_TITLE
> If you are exporting only a subtree, its heading will become the title of the
> @@ -10307,7 +10308,7 @@ is normal.
> 
> Org syntax includes pre-defined blocks (@pxref{Paragraphs} and @ref{Literal
> examples}).  It is also possible to create blocks containing raw code
> -targeted at a specific back-ends (e.g., @samp{#+BEGIN_LATEX}).
> +targeted at a specific back-end (e.g., @samp{#+BEGIN_LATEX}).
> 
> Any other block is a @emph{special block}.  Each export back-end decides if
> they should be exported, and how.  When the block is ignored, its contents
> @@ -15728,7 +15729,7 @@ Single keys can be made to execute commands when the cursor is at the
> beginning of a headline, i.e., before the first star.  Configure the variable
> @code{org-use-speed-commands} to activate this feature.  There is a
> pre-defined list of commands, and you can add more such commands using the
> -variable @code{org-speed-commands-user}.  Speed keys do not only speed up
> +variable @code{org-speed-commands-user}.  Speed keys not only speed up
> navigation and other commands, but they also provide an alternative way to
> execute commands bound to keys that are not or not easily available on a TTY,
> or on a small mobile device with a limited keyboard.
> @@ -15739,7 +15740,7 @@ with the cursor at the beginning of a headline.
> @node Code evaluation security
> @section Code evaluation and security issues
> 
> -Org provides tools to work with the code snippets, including evaluating them.
> +Org provides tools to work with code snippets, including evaluating them.
> 
> Running code on your machine always comes with a security risk.  Badly
> written or malicious code can be executed on purpose or by accident.  Org has
> @@ -15821,7 +15822,7 @@ per-file basis.  These lines start with a @samp{#+} followed by a
> keyword, a colon, and then individual words defining a setting.  Several
> setting words can be in the same line, but you can also have multiple
> lines for the keyword.  While these settings are described throughout
> -the manual, here is a summary.  After changing any of those lines in the
> +the manual, here is a summary.  After changing any of these lines in the
> buffer, press @kbd{C-c C-c} with the cursor still in the line to
> activate the changes immediately.  Otherwise they become effective only
> when the file is visited again in a new Emacs session.
> @@ -16606,7 +16607,7 @@ being encrypted again.
> @appendix Hacking
> @cindex hacking
> 
> -This appendix covers some aspects where users can extend the functionality of
> +This appendix covers some areas where users can extend the functionality of
> Org.
> 
> @menu
> @@ -16754,8 +16755,8 @@ not accept any arguments, and return the full link with prefix.
> @cindex Export, writing back-ends
> 
> Org 8.0 comes with a completely rewritten export engine which makes it easy
> -to write new export back-ends, either from scratch, or from deriving them
> -from existing ones.
> +to write new export back-ends, either from scratch, or by deriving them from
> +existing ones.
> 
> Your two entry points are respectively @code{org-export-define-backend} and
> @code{org-export-define-derived-backend}.  To grok these functions, you
> @@ -17225,7 +17226,7 @@ other block) with @code{org-narrow-to-block}.
> @vindex org-agenda-skip-function-global
> Org provides a special hook that can be used to narrow down the selection
> made by these agenda views: @code{agenda}, @code{agenda*}@footnote{The
> -@code{agenda*} view is the same than @code{agenda} except that it only
> +@code{agenda*} view is the same as @code{agenda} except that it only
> considers @emph{appointments}, i.e., scheduled and deadline items that have a
> time specification @code{[h]h:mm} in their time-stamps.}, @code{todo},
> @code{alltodo}, @code{tags}, @code{tags-todo}, @code{tags-tree}.  You may
> @@ -17331,7 +17332,7 @@ to become slow.  Below are some tips on how to speed up the agenda commands.
> 
> @enumerate
> @item
> -Reduce the number of Org agenda files: this will reduce the slowliness caused
> +Reduce the number of Org agenda files: this will reduce the slowdown caused
> by accessing to a hard drive.
> @item
> Reduce the number of DONE and archived headlines: this way the agenda does
> @@ -17665,7 +17666,7 @@ The following example counts the number of entries with TODO keyword
> @i{MobileOrg} is the name of the mobile companion app for Org mode, currently
> available for iOS and for Android.  @i{MobileOrg} offers offline viewing and
> capture support for an Org mode system rooted on a ``real'' computer.  It
> -does also allow you to record changes to existing entries.  The
> +also allows you to record changes to existing entries.  The
> @uref{https://github.com/MobileOrg/, iOS implementation} for the
> @i{iPhone/iPod Touch/iPad} series of devices, was started by Richard Moreland
> and is now in the hands Sean Escriva.  Android users should check out
> @@ -17694,9 +17695,9 @@ in-buffer settings, but it will understand the logistics of TODO state
> @node Setting up the staging area
> @section Setting up the staging area
> 
> -MobileOrg needs to interact with Emacs through a directory on a server.  If you
> -are using a public server, you should consider to encrypt the files that are
> -uploaded to the server.  This can be done with Org mode 7.02 and with
> +MobileOrg needs to interact with Emacs through a directory on a server.  If
> +you are using a public server, you should consider encrypting the files that
> +are uploaded to the server.  This can be done with Org mode 7.02 and with
> @i{MobileOrg 1.5} (iPhone version), and you need an @file{openssl}
> installation on your system.  To turn on encryption, set a password in
> @i{MobileOrg} and, on the Emacs side, configure the variable
> @@ -17731,7 +17732,7 @@ all agenda files (as listed in @code{org-agenda-files}), but additional files
> can be included by customizing @code{org-mobile-files}.  File names will be
> staged with paths relative to @code{org-directory}, so all files should be
> inside this directory@footnote{Symbolic links in @code{org-directory} need to
> -have the same name than their targets.}.
> +have the same name as their targets.}.
> 
> The push operation also creates a special Org file @file{agendas.org} with
> all custom agenda view defined by the user@footnote{While creating the
> -- 
> 1.7.10.4
> 


[-- Attachment #2: Message signed with OpenPGP using GPGMail --]
[-- Type: application/pgp-signature, Size: 455 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH] doc: Fix grammar and typo
  2013-10-14  6:42   ` Carsten Dominik
@ 2013-10-14  7:28     ` Noorul Islam Kamal Malmiyoda
  0 siblings, 0 replies; 6+ messages in thread
From: Noorul Islam Kamal Malmiyoda @ 2013-10-14  7:28 UTC (permalink / raw)
  To: Carsten Dominik; +Cc: TonyMc, emacs-org list

On Mon, Oct 14, 2013 at 12:12 PM, Carsten Dominik
<carsten.dominik@gmail.com> wrote:
> Noorul,
>
> thank you very much for this service!
> A few minutes to late, I did this on my train ride.
>

No problems, it was like a minor English refresh course :-)

Thanks and Regards
Noorul

> - Carsten
>
> On 14.10.2013, at 07:11, Noorul Islam K M <noorul@noorul.com> wrote:
>
>>
>> * doc/org.texi: Fix grammar and typo.
>>
>> Based on the patch proposed by TonyMc
>> ---
>> doc/org.texi |  109 +++++++++++++++++++++++++++++-----------------------------
>> 1 file changed, 55 insertions(+), 54 deletions(-)
>>
>> diff --git a/doc/org.texi b/doc/org.texi
>> index 0271d70..a202af8 100644
>> --- a/doc/org.texi
>> +++ b/doc/org.texi
>> @@ -1011,7 +1011,7 @@ version information of Emacs (@kbd{M-x emacs-version @key{RET}}) and Org
>> @kbd{M-x org-submit-bug-report RET}
>> @end example
>> @noindent which will put all this information into an Emacs mail buffer so
>> -that you only need to add your description.  If you re not sending the Email
>> +that you only need to add your description.  If you are not sending the Email
>> from within Emacs, please copy and paste the content into your Email program.
>>
>> Sometimes you might face a problem due to an error in your Emacs or Org mode
>> @@ -1426,7 +1426,7 @@ See also the option @code{org-goto-interface}.
>> @table @asis
>> @orgcmd{M-@key{RET},org-insert-heading}
>> @vindex org-M-RET-may-split-line
>> -Insert a new heading/item with the same level than the one at point.
>> +Insert a new heading/item with the same level as the one at point.
>> If the cursor is in a plain list item, a new item is created
>> (@pxref{Plain lists}).  To prevent this behavior in lists, call the
>> command with a prefix argument.  When this command is used in the
>> @@ -1476,7 +1476,7 @@ of the one just marked.  E.g., hitting @key{M-h} on a paragraph will mark it,
>> hitting @key{M-h} immediately again will mark the next one.
>> @orgcmd{C-c @@,org-mark-subtree}
>> Mark the subtree at point.  Hitting repeatedly will mark subsequent subtrees
>> -of the same level than the marked subtree.
>> +of the same level as the marked subtree.
>> @orgcmd{C-c C-x C-w,org-cut-subtree}
>> Kill subtree, i.e., remove it from buffer but save in kill ring.
>> With a numeric prefix argument N, kill N sequential subtrees.
>> @@ -1567,7 +1567,7 @@ variables @code{org-show-hierarchy-above}, @code{org-show-following-heading},
>> control on how much context is shown around each match.}.  Just try it out
>> and you will see immediately how it works.
>>
>> -Org mode contains several commands creating such trees, all these
>> +Org mode contains several commands for creating such trees, all these
>> commands can be accessed through a dispatcher:
>>
>> @table @asis
>> @@ -1707,7 +1707,7 @@ blocks can be indented to signal that they belong to a particular item.
>> If you find that using a different bullet for a sub-list (than that used for
>> the current list-level) improves readability, customize the variable
>> @code{org-list-demote-modify-bullet}.  To get a greater difference of
>> -indentation between items and theirs sub-items, customize
>> +indentation between items and their sub-items, customize
>> @code{org-list-indent-offset}.
>>
>> @vindex org-list-automatic-rules
>> @@ -2133,7 +2133,7 @@ unpredictable for you, configure the options
>> @table @kbd
>> @tsubheading{Creation and conversion}
>> @orgcmd{C-c |,org-table-create-or-convert-from-region}
>> -Convert the active region to table.  If every line contains at least one
>> +Convert the active region to a table.  If every line contains at least one
>> TAB character, the function assumes that the material is tab separated.
>> If every line contains a comma, comma-separated values (CSV) are assumed.
>> If not, lines are split at whitespace into fields.  You can use a prefix
>> @@ -2533,7 +2533,7 @@ format at least for the first field (i.e the reference must start with
>> @example
>> $1..$3        @r{first three fields in the current row}
>> $P..$Q        @r{range, using column names (see under Advanced)}
>> -$<<<..$>>     @r{start in third column, continue to the one but last}
>> +$<<<..$>>     @r{start in third column, continue to the last but one}
>> @@2$1..@@4$3    @r{6 fields between these two fields (same as @code{A2..C4})}
>> @@-1$-2..@@-1   @r{3 fields in the row above, starting from 2 columns on the left}
>> @@I..II        @r{between first and second hline, short for @code{@@I..@@II}}
>> @@ -2794,7 +2794,7 @@ formulas or Elisp formulas:
>> @end group
>> @end example
>>
>> -Input duration values must be of the form @code{[HH:MM[:SS]}, where seconds
>> +Input duration values must be of the form @code{HH:MM[:SS]}, where seconds
>> are optional.  With the @code{T} flag, computed durations will be displayed
>> as @code{HH:MM:SS} (see the first formula above).  With the @code{t} flag,
>> computed durations will be displayed according to the value of the option
>> @@ -2822,9 +2822,9 @@ current field will be replaced with the result.
>> Formulas are stored in a special line starting with @samp{#+TBLFM:} directly
>> below the table.  If you type the equation in the 4th field of the 3rd data
>> line in the table, the formula will look like @samp{@@3$4=$1+$2}.  When
>> -inserting/deleting/swapping column and rows with the appropriate commands,
>> +inserting/deleting/swapping columns and rows with the appropriate commands,
>> @i{absolute references} (but not relative ones) in stored formulas are
>> -modified in order to still reference the same field.  To avoid this from
>> +modified in order to still reference the same field.  To prevent this from
>> happening, in particular in range references, anchor ranges at the table
>> borders (using @code{@@<}, @code{@@>}, @code{$<}, @code{$>}), or at hlines
>> using the @code{@@I} notation.  Automatic adaptation of field references does
>> @@ -2885,7 +2885,7 @@ and the current field replaced with the result.  If the field contains only
>> @samp{=}, the previously stored formula for this column is used.  For each
>> column, Org will only remember the most recently used formula.  In the
>> @samp{#+TBLFM:} line, column formulas will look like @samp{$4=$1+$2}.  The
>> -left-hand side of a column formula can not be the name of column, it must be
>> +left-hand side of a column formula cannot be the name of column, it must be
>> the numeric column reference or @code{$>}.
>>
>> Instead of typing an equation into the field, you may also use the
>> @@ -3396,8 +3396,8 @@ a @i{dedicated target}: the same string in double angular brackets, like
>> @cindex #+NAME
>> If no dedicated target exists, the link will then try to match the exact name
>> of an element within the buffer.  Naming is done with the @code{#+NAME}
>> -keyword, which has to be put the line before the element it refers to, as in
>> -the following example
>> +keyword, which has to be put in the line before the element it refers to, as
>> +in the following example
>>
>> @example
>> #+NAME: My Target
>> @@ -3807,7 +3807,7 @@ url-encode the tag (see the example above, where we need to encode
>> the URL parameter.)  Using @samp{%(my-function)} will pass the tag
>> to a custom function, and replace it by the resulting string.
>>
>> -If the replacement text don't contain any specifier, it will simply
>> +If the replacement text doesn't contain any specifier, it will simply
>> be appended to the string in order to create the link.
>>
>> Instead of a string, you may also specify a function that will be
>> @@ -4141,8 +4141,8 @@ These keys jump from one TODO subset to the next.  In the above example,
>> @kindex S-@key{left}
>> @item S-@key{right}
>> @itemx S-@key{left}
>> -@kbd{S-@key{<left>}} and @kbd{S-@key{<right>}} and walk through @emph{all}
>> -keywords from all sets, so for example @kbd{S-@key{<right>}} would switch
>> +@kbd{S-@key{left}} and @kbd{S-@key{right}} and walk through @emph{all}
>> +keywords from all sets, so for example @kbd{S-@key{right}} would switch
>> from @code{DONE} to @code{REPORT} in the example above.  See also
>> @ref{Conflicts}, for a discussion of the interaction with
>> @code{shift-selection-mode}.
>> @@ -4401,7 +4401,7 @@ To record a timestamp without a note for TODO keywords configured with
>>
>> @noindent
>> @vindex org-log-done
>> -you not only define global TODO keywords and fast access keys, but also
>> +You not only define global TODO keywords and fast access keys, but also
>> request that a time is recorded when the entry is set to
>> DONE@footnote{It is possible that Org mode will record two timestamps
>> when you are using both @code{org-log-done} and state change logging.
>> @@ -5192,7 +5192,7 @@ file, use a line like
>> @end example
>>
>> Contrary to properties set from a special drawer, you have to refresh the
>> -buffer with @kbd{C-c C-c} to activate this changes.
>> +buffer with @kbd{C-c C-c} to activate this change.
>>
>> If you want to add to the value of an existing property, append a @code{+} to
>> the property name.  The following results in the property @code{var} having
>> @@ -5594,7 +5594,7 @@ View the full value of this property.  This is useful if the width of
>> the column is smaller than that of the value.
>> @orgcmd{a,org-columns-edit-allowed}
>> Edit the list of allowed values for this property.  If the list is found
>> -in the hierarchy, the modified values is stored there.  If no list is
>> +in the hierarchy, the modified value is stored there.  If no list is
>> found, the new value is stored in the first entry that is part of the
>> current column view.
>> @tsubheading{Modifying the table structure}
>> @@ -5703,7 +5703,7 @@ property API}.
>> To assist project planning, TODO items can be labeled with a date and/or
>> a time.  The specially formatted string carrying the date and time
>> information is called a @emph{timestamp} in Org mode.  This may be a
>> -little confusing because timestamp is often used as indicating when
>> +little confusing because timestamp is often used to indicate when
>> something was created or last changed.  However, in Org mode this term
>> is used in a much wider sense.
>>
>> @@ -5769,7 +5769,7 @@ following will show up in the agenda every Wednesday:
>> For more complex date specifications, Org mode supports using the special
>> sexp diary entries implemented in the Emacs calendar/diary
>> package@footnote{When working with the standard diary sexp functions, you
>> -need to be very careful with the order of the arguments.  That order depend
>> +need to be very careful with the order of the arguments.  That order depends
>> evilly on the variable @code{calendar-date-style} (or, for older Emacs
>> versions, @code{european-calendar-style}).  For example, to specify a date
>> December 12, 2005, the call might look like @code{(diary-date 12 1 2005)} or
>> @@ -6084,9 +6084,9 @@ until the entry is marked DONE@.  An example:
>> @end example
>>
>> You can specify a different lead time for warnings for a specific
>> -deadlines using the following syntax.  Here is an example with a warning
>> +deadline using the following syntax.  Here is an example with a warning
>> period of 5 days @code{DEADLINE: <2004-02-29 Sun -5d>}.  This warning is
>> -deactivated if the task get scheduled and you set
>> +deactivated if the task gets scheduled and you set
>> @code{org-agenda-skip-deadline-prewarning-if-scheduled} to @code{t}.
>>
>> @item SCHEDULED
>> @@ -6305,7 +6305,7 @@ stopped and the corresponding time interval is recorded.  It also computes
>> the total time spent on each subtree@footnote{Clocking only works if all
>> headings are indented with less than 30 stars.  This is a hardcoded
>> limitation of `lmax' in `org-clock-sum'.} of a project.  And it remembers a
>> -history or tasks recently clocked, to that you can jump quickly between a
>> +history or tasks recently clocked, so that you can jump quickly between a
>> number of tasks absorbing your time.
>>
>> To save the clock history across Emacs sessions, use
>> @@ -6370,7 +6370,7 @@ mode line entry will pop up a menu with clocking options.
>> @vindex org-log-note-clock-out
>> Stop the clock (clock-out).  This inserts another timestamp at the same
>> location where the clock was last started.  It also directly computes
>> -the resulting time in inserts it after the time range as @samp{=>
>> +the resulting time and inserts it after the time range as @samp{=>
>> HH:MM}.  See the variable @code{org-log-note-clock-out} for the
>> possibility to record an additional note together with the clock-out
>> timestamp@footnote{The corresponding in-buffer setting is:
>> @@ -6465,7 +6465,7 @@ buffer with the @kbd{C-c C-x C-r} command:
>> @end example
>> @noindent
>> @vindex org-clocktable-defaults
>> -The @samp{BEGIN} line and specify a number of options to define the scope,
>> +The @samp{BEGIN} line specifies a number of options to define the scope,
>> structure, and formatting of the report.  Defaults for all these options can
>> be configured in the variable @code{org-clocktable-defaults}.
>>
>> @@ -6514,7 +6514,7 @@ be selected:
>>              @r{@ref{Matching tags and properties} for the match syntax.}
>> @end example
>>
>> -Then there are options which determine the formatting of the table.  There
>> +Then there are options which determine the formatting of the table.  These
>> options are interpreted by the function @code{org-clocktable-write-default},
>> but you can specify your own function using the @code{:formatter} parameter.
>> @example
>> @@ -8040,7 +8040,7 @@ Group tags (@pxref{Tag groups}) are expanded as regular expressions.  E.g.,
>> if @samp{:work:} is a group tag for the group @samp{:work:lab:conf:}, then
>> searching for @samp{work} will search for @samp{@{\(?:work\|lab\|conf\)@}}
>> and searching for @samp{-work} will search for all headlines but those with
>> -one of the tag in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}).
>> +one of the tags in the group (i.e., @samp{-@{\(?:work\|lab\|conf\)@}}).
>>
>> @cindex TODO keyword matching, with tags search
>> @cindex level, require for tags/property match
>> @@ -8055,8 +8055,8 @@ the entry.  The ITEM special property cannot currently be used in tags/property
>> searches@footnote{But @pxref{x-agenda-skip-entry-regexp,
>> ,skipping entries based on regexp}.}.
>>
>> -Except the @pxref{Special properties}, one other ``property'' can also be
>> -used. @code{LEVEL} represents the level of an entry.  So a search
>> +In addition to the @pxref{Special properties}, one other ``property'' can
>> +also be used. @code{LEVEL} represents the level of an entry.  So a search
>> @samp{+LEVEL=3+boss-TODO="DONE"} lists all level three headlines that have
>> the tag @samp{boss} and are @emph{not} marked with the TODO keyword DONE@.
>> In buffers with @code{org-odd-levels-only} set, @samp{LEVEL} does not count
>> @@ -8391,10 +8391,11 @@ the estimated effort of an entry (@pxref{Effort estimates}).
>>
>> Agenda built-in or customized commands are statically defined.  Agenda
>> filters and limits provide two ways of dynamically narrowing down the list of
>> -agenda entries: @emph{fitlers} and @emph{limits}.  Filters only act on the
>> +agenda entries: @emph{filters} and @emph{limits}.  Filters only act on the
>> display of the items, while limits take effect before the list of agenda
>> -entries is built.  Filter are more often used interactively, while limits are
>> -mostly useful when defined as local variables within custom agenda commands.
>> +entries is built.  Filters are more often used interactively, while limits
>> +are mostly useful when defined as local variables within custom agenda
>> +commands.
>>
>> @subsubheading Filtering in the agenda
>> @cindex filtering, by tag, category, top headline and effort, in agenda
>> @@ -8542,8 +8543,8 @@ Limit the number of tagged entries.
>> @end table
>>
>> When set to a positive integer, each option will exclude entries from other
>> -catogories: for example, @code{(setq org-agenda-max-effort 100)} will limit
>> -the agenda to 100 minutes of effort and exclude any entry that as no effort
>> +categories: for example, @code{(setq org-agenda-max-effort 100)} will limit
>> +the agenda to 100 minutes of effort and exclude any entry that has no effort
>> property.  If you want to include entries with no effort property, use a
>> negative value for @code{org-agenda-max-effort}.
>>
>> @@ -9313,7 +9314,7 @@ yourself.
>> @vindex org-agenda-custom-commands-contexts
>> To control whether an agenda command should be accessible from a specific
>> context, you can customize @code{org-agenda-custom-commands-contexts}.  Let's
>> -say for example that you have an agenda commands @code{"o"} displaying a view
>> +say for example that you have an agenda command @code{"o"} displaying a view
>> that you only need when reading emails.  Then you would configure this option
>> like this:
>>
>> @@ -9540,9 +9541,9 @@ spent (via @code{CLOCKSUM}) and with the planned total effort for it.
>>
>> When exporting Org mode documents, the exporter tries to reflect the
>> structure of the document as accurately as possible in the back-end.  Since
>> -export targets like HTML, @LaTeX{} allow much richer formatting, Org mode has
>> -rules on how to prepare text for rich export.  This section summarizes the
>> -markup rules used in an Org mode buffer.
>> +export targets like HTML and @LaTeX{} allow much richer formatting, Org mode
>> +has rules on how to prepare text for rich export.  This section summarizes
>> +the markup rules used in an Org mode buffer.
>>
>> @menu
>> * Structural markup elements::  The basic structure as seen by the exporter
>> @@ -9584,7 +9585,7 @@ The title of the exported document is taken from the special line
>>
>> @noindent
>> If this line does not exist, the title will be the name of the file
>> -associated to buffer, without extension, or the buffer name.
>> +associated with the buffer, without extension, or the buffer name.
>>
>> @cindex property, EXPORT_TITLE
>> If you are exporting only a subtree, its heading will become the title of the
>> @@ -10307,7 +10308,7 @@ is normal.
>>
>> Org syntax includes pre-defined blocks (@pxref{Paragraphs} and @ref{Literal
>> examples}).  It is also possible to create blocks containing raw code
>> -targeted at a specific back-ends (e.g., @samp{#+BEGIN_LATEX}).
>> +targeted at a specific back-end (e.g., @samp{#+BEGIN_LATEX}).
>>
>> Any other block is a @emph{special block}.  Each export back-end decides if
>> they should be exported, and how.  When the block is ignored, its contents
>> @@ -15728,7 +15729,7 @@ Single keys can be made to execute commands when the cursor is at the
>> beginning of a headline, i.e., before the first star.  Configure the variable
>> @code{org-use-speed-commands} to activate this feature.  There is a
>> pre-defined list of commands, and you can add more such commands using the
>> -variable @code{org-speed-commands-user}.  Speed keys do not only speed up
>> +variable @code{org-speed-commands-user}.  Speed keys not only speed up
>> navigation and other commands, but they also provide an alternative way to
>> execute commands bound to keys that are not or not easily available on a TTY,
>> or on a small mobile device with a limited keyboard.
>> @@ -15739,7 +15740,7 @@ with the cursor at the beginning of a headline.
>> @node Code evaluation security
>> @section Code evaluation and security issues
>>
>> -Org provides tools to work with the code snippets, including evaluating them.
>> +Org provides tools to work with code snippets, including evaluating them.
>>
>> Running code on your machine always comes with a security risk.  Badly
>> written or malicious code can be executed on purpose or by accident.  Org has
>> @@ -15821,7 +15822,7 @@ per-file basis.  These lines start with a @samp{#+} followed by a
>> keyword, a colon, and then individual words defining a setting.  Several
>> setting words can be in the same line, but you can also have multiple
>> lines for the keyword.  While these settings are described throughout
>> -the manual, here is a summary.  After changing any of those lines in the
>> +the manual, here is a summary.  After changing any of these lines in the
>> buffer, press @kbd{C-c C-c} with the cursor still in the line to
>> activate the changes immediately.  Otherwise they become effective only
>> when the file is visited again in a new Emacs session.
>> @@ -16606,7 +16607,7 @@ being encrypted again.
>> @appendix Hacking
>> @cindex hacking
>>
>> -This appendix covers some aspects where users can extend the functionality of
>> +This appendix covers some areas where users can extend the functionality of
>> Org.
>>
>> @menu
>> @@ -16754,8 +16755,8 @@ not accept any arguments, and return the full link with prefix.
>> @cindex Export, writing back-ends
>>
>> Org 8.0 comes with a completely rewritten export engine which makes it easy
>> -to write new export back-ends, either from scratch, or from deriving them
>> -from existing ones.
>> +to write new export back-ends, either from scratch, or by deriving them from
>> +existing ones.
>>
>> Your two entry points are respectively @code{org-export-define-backend} and
>> @code{org-export-define-derived-backend}.  To grok these functions, you
>> @@ -17225,7 +17226,7 @@ other block) with @code{org-narrow-to-block}.
>> @vindex org-agenda-skip-function-global
>> Org provides a special hook that can be used to narrow down the selection
>> made by these agenda views: @code{agenda}, @code{agenda*}@footnote{The
>> -@code{agenda*} view is the same than @code{agenda} except that it only
>> +@code{agenda*} view is the same as @code{agenda} except that it only
>> considers @emph{appointments}, i.e., scheduled and deadline items that have a
>> time specification @code{[h]h:mm} in their time-stamps.}, @code{todo},
>> @code{alltodo}, @code{tags}, @code{tags-todo}, @code{tags-tree}.  You may
>> @@ -17331,7 +17332,7 @@ to become slow.  Below are some tips on how to speed up the agenda commands.
>>
>> @enumerate
>> @item
>> -Reduce the number of Org agenda files: this will reduce the slowliness caused
>> +Reduce the number of Org agenda files: this will reduce the slowdown caused
>> by accessing to a hard drive.
>> @item
>> Reduce the number of DONE and archived headlines: this way the agenda does
>> @@ -17665,7 +17666,7 @@ The following example counts the number of entries with TODO keyword
>> @i{MobileOrg} is the name of the mobile companion app for Org mode, currently
>> available for iOS and for Android.  @i{MobileOrg} offers offline viewing and
>> capture support for an Org mode system rooted on a ``real'' computer.  It
>> -does also allow you to record changes to existing entries.  The
>> +also allows you to record changes to existing entries.  The
>> @uref{https://github.com/MobileOrg/, iOS implementation} for the
>> @i{iPhone/iPod Touch/iPad} series of devices, was started by Richard Moreland
>> and is now in the hands Sean Escriva.  Android users should check out
>> @@ -17694,9 +17695,9 @@ in-buffer settings, but it will understand the logistics of TODO state
>> @node Setting up the staging area
>> @section Setting up the staging area
>>
>> -MobileOrg needs to interact with Emacs through a directory on a server.  If you
>> -are using a public server, you should consider to encrypt the files that are
>> -uploaded to the server.  This can be done with Org mode 7.02 and with
>> +MobileOrg needs to interact with Emacs through a directory on a server.  If
>> +you are using a public server, you should consider encrypting the files that
>> +are uploaded to the server.  This can be done with Org mode 7.02 and with
>> @i{MobileOrg 1.5} (iPhone version), and you need an @file{openssl}
>> installation on your system.  To turn on encryption, set a password in
>> @i{MobileOrg} and, on the Emacs side, configure the variable
>> @@ -17731,7 +17732,7 @@ all agenda files (as listed in @code{org-agenda-files}), but additional files
>> can be included by customizing @code{org-mobile-files}.  File names will be
>> staged with paths relative to @code{org-directory}, so all files should be
>> inside this directory@footnote{Symbolic links in @code{org-directory} need to
>> -have the same name than their targets.}.
>> +have the same name as their targets.}.
>>
>> The push operation also creates a special Org file @file{agendas.org} with
>> all custom agenda view defined by the user@footnote{While creating the
>> --
>> 1.7.10.4
>>
>

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2013-10-14  7:28 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-10-13 17:01 Some documentation suggestions TonyMc
2013-10-14  4:49 ` Noorul Islam K M
2013-10-14  5:11 ` [PATCH] doc: Fix grammar and typo Noorul Islam K M
2013-10-14  6:42   ` Carsten Dominik
2013-10-14  7:28     ` Noorul Islam Kamal Malmiyoda
2013-10-14  6:40 ` Some documentation suggestions Carsten Dominik

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).