* Export problem with source code blocks
@ 2013-03-30 19:29 Thomas S. Dye
2013-03-30 21:29 ` Eric Schulte
0 siblings, 1 reply; 3+ messages in thread
From: Thomas S. Dye @ 2013-03-30 19:29 UTC (permalink / raw)
To: Org-mode
Aloha all,
The following code block executes fine in the Org buffer, and it
exported cleanly on January 18th, but fails on export to LaTeX with a
recent version of Org from the git repo. Here is the error message:
executing Emacs-Lisp code block (plos-one-start)...
Debugger entered--Lisp error: (void-function first)
(first row)
#+name: plos-one-start
#+header: :var tab=author-table
#+header: :var title="A Regional Chronology"
#+header: :results raw :wrap latex
#+header: :exports results
#+begin_src emacs-lisp
(defun author-name (recs)
"Format the author name list."
(let ((i 0))
(mapcar (lambda (row)
(concat (format "%s$^{%d%s" (first row)
(incf i)
(if (equal "yes" (eighth row)) ",\\ast" ""))
(if (equal row (car (last recs))) "}$" "}$,")))
recs)))
(defun author-affiliation (recs)
"Format the author affiliation list."
(let ((i 0))
(mapcar (lambda (row)
(format "\\bf{%d} %s, %s, %s, %s, %s" (incf i)
(second row) (third row) (fourth row)
(fifth row) (sixth row)))
recs)))
(defun corresponding-email (recs)
"Return the corresponding email."
(mapcar (lambda (row)
(format "%s" (if (equal "yes" (eighth row)) (seventh row) "")))
recs))
(let* ((tab (cdr (cdr tab)))
(a (author-name tab))
(b (author-affiliation tab))
(c (corresponding-email tab)))
(concat (format "\\begin{flushleft}\n{\\Large\n\\textbf{%s}\n}\n\\\\\n" title)
(mapconcat 'identity a "\n") "\n\\\\\n"
(mapconcat 'identity b "\n\\\\\n")
"\n\\\\\n$\\ast$ E-mail: "
(mapconcat 'identity c "\n")
"\n\\end{flushleft}"))
#+end_src
#+name: author-table
| Author name | Department | Institution | City | State | Country | Email | Corresponding |
|---------------+----------------------------+-----------------------+----------+-------+---------+---------------+---------------|
| Thomas S. Dye | Department of Anthropology | University of Hawai`i | Honolulu | HI | USA | tsd@tsdye.com | yes |
All the best,
Tom
--
T.S. Dye & Colleagues, Archaeologists
735 Bishop St, Suite 315, Honolulu, HI 96813
Tel: 808-529-0866, Fax: 808-529-0884
http://www.tsdye.com
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Export problem with source code blocks
2013-03-30 19:29 Export problem with source code blocks Thomas S. Dye
@ 2013-03-30 21:29 ` Eric Schulte
2013-03-30 22:32 ` Thomas S. Dye
0 siblings, 1 reply; 3+ messages in thread
From: Eric Schulte @ 2013-03-30 21:29 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: Org-mode
Hi Tom,
The `first' function is provided by the cl package. I'd either replace
`first' with `car' in your code block, or add (require 'cl) to your
personal Emacs configuration.
Cheers,
tsd@tsdye.com (Thomas S. Dye) writes:
> Aloha all,
>
> The following code block executes fine in the Org buffer, and it
> exported cleanly on January 18th, but fails on export to LaTeX with a
> recent version of Org from the git repo. Here is the error message:
>
> executing Emacs-Lisp code block (plos-one-start)...
>
> Debugger entered--Lisp error: (void-function first)
> (first row)
>
> #+name: plos-one-start
> #+header: :var tab=author-table
> #+header: :var title="A Regional Chronology"
> #+header: :results raw :wrap latex
> #+header: :exports results
> #+begin_src emacs-lisp
> (defun author-name (recs)
> "Format the author name list."
> (let ((i 0))
> (mapcar (lambda (row)
> (concat (format "%s$^{%d%s" (first row)
> (incf i)
> (if (equal "yes" (eighth row)) ",\\ast" ""))
> (if (equal row (car (last recs))) "}$" "}$,")))
> recs)))
>
> (defun author-affiliation (recs)
> "Format the author affiliation list."
> (let ((i 0))
> (mapcar (lambda (row)
> (format "\\bf{%d} %s, %s, %s, %s, %s" (incf i)
> (second row) (third row) (fourth row)
> (fifth row) (sixth row)))
> recs)))
> (defun corresponding-email (recs)
> "Return the corresponding email."
> (mapcar (lambda (row)
> (format "%s" (if (equal "yes" (eighth row)) (seventh row) "")))
> recs))
>
> (let* ((tab (cdr (cdr tab)))
> (a (author-name tab))
> (b (author-affiliation tab))
> (c (corresponding-email tab)))
> (concat (format "\\begin{flushleft}\n{\\Large\n\\textbf{%s}\n}\n\\\\\n" title)
> (mapconcat 'identity a "\n") "\n\\\\\n"
> (mapconcat 'identity b "\n\\\\\n")
> "\n\\\\\n$\\ast$ E-mail: "
> (mapconcat 'identity c "\n")
> "\n\\end{flushleft}"))
> #+end_src
>
> #+name: author-table
> | Author name | Department | Institution | City | State | Country | Email | Corresponding |
> |---------------+----------------------------+-----------------------+----------+-------+---------+---------------+---------------|
> | Thomas S. Dye | Department of Anthropology | University of Hawai`i |
> | Honolulu | HI | USA | tsd@tsdye.com | yes |
>
> All the best,
> Tom
--
Eric Schulte
http://cs.unm.edu/~eschulte
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Export problem with source code blocks
2013-03-30 21:29 ` Eric Schulte
@ 2013-03-30 22:32 ` Thomas S. Dye
0 siblings, 0 replies; 3+ messages in thread
From: Thomas S. Dye @ 2013-03-30 22:32 UTC (permalink / raw)
To: Eric Schulte; +Cc: Org-mode
Hi Eric,
Yes, that fixes it. The cl package wasn't loaded for asynchronous
export.
The code executes in the buffer without an explicit (require 'cl). It's
a mystery to me where it gets loaded in my setup, though. I don't do it
explicitly--perhaps it tags along with some other package that I do load.
Thanks,
Tom
Eric Schulte <schulte.eric@gmail.com> writes:
> Hi Tom,
>
> The `first' function is provided by the cl package. I'd either replace
> `first' with `car' in your code block, or add (require 'cl) to your
> personal Emacs configuration.
>
> Cheers,
>
> tsd@tsdye.com (Thomas S. Dye) writes:
>
>> Aloha all,
>>
>> The following code block executes fine in the Org buffer, and it
>> exported cleanly on January 18th, but fails on export to LaTeX with a
>> recent version of Org from the git repo. Here is the error message:
>>
>> executing Emacs-Lisp code block (plos-one-start)...
>>
>> Debugger entered--Lisp error: (void-function first)
>> (first row)
>>
>> #+name: plos-one-start
>> #+header: :var tab=author-table
>> #+header: :var title="A Regional Chronology"
>> #+header: :results raw :wrap latex
>> #+header: :exports results
>> #+begin_src emacs-lisp
>> (defun author-name (recs)
>> "Format the author name list."
>> (let ((i 0))
>> (mapcar (lambda (row)
>> (concat (format "%s$^{%d%s" (first row)
>> (incf i)
>> (if (equal "yes" (eighth row)) ",\\ast" ""))
>> (if (equal row (car (last recs))) "}$" "}$,")))
>> recs)))
>>
>> (defun author-affiliation (recs)
>> "Format the author affiliation list."
>> (let ((i 0))
>> (mapcar (lambda (row)
>> (format "\\bf{%d} %s, %s, %s, %s, %s" (incf i)
>> (second row) (third row) (fourth row)
>> (fifth row) (sixth row)))
>> recs)))
>> (defun corresponding-email (recs)
>> "Return the corresponding email."
>> (mapcar (lambda (row)
>> (format "%s" (if (equal "yes" (eighth row)) (seventh row) "")))
>> recs))
>>
>> (let* ((tab (cdr (cdr tab)))
>> (a (author-name tab))
>> (b (author-affiliation tab))
>> (c (corresponding-email tab)))
>> (concat (format "\\begin{flushleft}\n{\\Large\n\\textbf{%s}\n}\n\\\\\n" title)
>> (mapconcat 'identity a "\n") "\n\\\\\n"
>> (mapconcat 'identity b "\n\\\\\n")
>> "\n\\\\\n$\\ast$ E-mail: "
>> (mapconcat 'identity c "\n")
>> "\n\\end{flushleft}"))
>> #+end_src
>>
>> #+name: author-table
>> | Author name | Department | Institution | City | State | Country |
>> | Email | Corresponding |
>> |---------------+----------------------------+-----------------------+----------+-------+---------+---------------+---------------|
>> | Thomas S. Dye | Department of Anthropology | University of Hawai`i |
>> | Honolulu | HI | USA | tsd@tsdye.com | yes |
>>
>> All the best,
>> Tom
--
Thomas S. Dye
http://www.tsdye.com
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2013-03-30 22:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-03-30 19:29 Export problem with source code blocks Thomas S. Dye
2013-03-30 21:29 ` Eric Schulte
2013-03-30 22:32 ` Thomas S. Dye
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).