* org-latex-image-default-width ignored
@ 2018-03-24 15:20 Julien Cubizolles
2018-03-24 17:57 ` Eric S Fraga
0 siblings, 1 reply; 5+ messages in thread
From: Julien Cubizolles @ 2018-03-24 15:20 UTC (permalink / raw)
To: emacs-orgmode
I'd like all inline images resized during beamer and latex export. I
tried setting org-latex-image-default-width to ".3\\linewidth" but after
export the latex file still uses the default .9\linewidth default. See
the following examples.
Julien.
orgmode file:
--8<---------------cut here---------------start------------->8---
#+begin_src emacs-lisp :exports none
(setq org-latex-image-default-width ".3\\linewidth")
#+end_src
#+RESULTS:
: .3\linewidth
* hello
[[file:file:/home/wilk/enseignement/schemas/plickers/mvmt-circ-F-faux.png]]
--8<---------------cut here---------------end--------------->8---
gets exported to:
--8<---------------cut here---------------start------------->8---
% Created 2018-03-24 sam. 16:06
% Intended LaTeX compiler: pdflatex
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{graphicx}
\usepackage{grffile}
\usepackage{longtable}
\usepackage{wrapfig}
\usepackage{rotating}
\usepackage[normalem]{ulem}
\usepackage{amsmath}
\usepackage{textcomp}
\usepackage{amssymb}
\usepackage{capt-of}
\usepackage{hyperref}
\author{Julien Cubizolles}
\date{\today}
\title{}
\hypersetup{
pdfauthor={Julien Cubizolles},
pdftitle={},
pdfkeywords={},
pdfsubject={},
pdfcreator={Emacs 27.0.50 (Org mode 9.1.7)},
pdflang={English}}
\begin{document}
\tableofcontents
\section{hello}
\label{sec:org777755b}
\begin{center}
\includegraphics[width=.9\linewidth]{file:/home/wilk/enseignement/schemas/plickers/mvmt-circ-F-faux.png}
\end{center}
\end{document}--8<---------------cut here---------------end--------------->8---
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: org-latex-image-default-width ignored
2018-03-24 15:20 org-latex-image-default-width ignored Julien Cubizolles
@ 2018-03-24 17:57 ` Eric S Fraga
2018-03-25 7:52 ` Julien Cubizolles
0 siblings, 1 reply; 5+ messages in thread
From: Eric S Fraga @ 2018-03-24 17:57 UTC (permalink / raw)
To: Julien Cubizolles; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 469 bytes --]
On Saturday, 24 Mar 2018 at 16:20, Julien Cubizolles wrote:
> I'd like all inline images resized during beamer and latex export. I
> tried setting org-latex-image-default-width to ".3\\linewidth" but after
> export the latex file still uses the default .9\linewidth default. See
> the following examples.
Your example works for me with up to date org from git. What version
are you using?
--
Eric S Fraga via Emacs 27.0.50, Org release_9.1.6-341-g3a4fd3
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 194 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: org-latex-image-default-width ignored
2018-03-24 17:57 ` Eric S Fraga
@ 2018-03-25 7:52 ` Julien Cubizolles
2018-03-25 11:56 ` Eric S Fraga
0 siblings, 1 reply; 5+ messages in thread
From: Julien Cubizolles @ 2018-03-25 7:52 UTC (permalink / raw)
To: emacs-orgmode
Eric S Fraga <esflists@gmail.com> writes:
> On Saturday, 24 Mar 2018 at 16:20, Julien Cubizolles wrote:
>> I'd like all inline images resized during beamer and latex export. I
>> tried setting org-latex-image-default-width to ".3\\linewidth" but after
>> export the latex file still uses the default .9\linewidth default. See
>> the following examples.
>
> Your example works for me with up to date org from git. What version
> are you using?
Found the cause of the problem, my default configuration exports in
async mode, so this variable should be set in
org-export-async-init.el.
Is there a way to have a variable set during export to avoid setting it
for all exports?
Julien.
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: org-latex-image-default-width ignored
2018-03-25 7:52 ` Julien Cubizolles
@ 2018-03-25 11:56 ` Eric S Fraga
2018-03-26 8:39 ` Julien Cubizolles
0 siblings, 1 reply; 5+ messages in thread
From: Eric S Fraga @ 2018-03-25 11:56 UTC (permalink / raw)
To: Julien Cubizolles; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 473 bytes --]
On Sunday, 25 Mar 2018 at 09:52, Julien Cubizolles wrote:
> Found the cause of the problem, my default configuration exports in
> async mode, so this variable should be set in
> org-export-async-init.el.
>
> Is there a way to have a variable set during export to avoid setting it
> for all exports?
I've never used the async export so I am not sure but maybe check out
the #+bind: directive?
--
Eric S Fraga via Emacs 27.0.50, Org release_9.1.6-347-gd73a5e
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 194 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: org-latex-image-default-width ignored
2018-03-25 11:56 ` Eric S Fraga
@ 2018-03-26 8:39 ` Julien Cubizolles
0 siblings, 0 replies; 5+ messages in thread
From: Julien Cubizolles @ 2018-03-26 8:39 UTC (permalink / raw)
To: emacs-orgmode
Eric S Fraga <esflists@gmail.com> writes:
> On Sunday, 25 Mar 2018 at 09:52, Julien Cubizolles wrote:
>> Found the cause of the problem, my default configuration exports in
>> async mode, so this variable should be set in
>> org-export-async-init.el.
>>
>> Is there a way to have a variable set during export to avoid setting it
>> for all exports?
>
> I've never used the async export so I am not sure but maybe check out
> the #+bind: directive?
I tried
--8<---------------cut here---------------start------------->8---
#+BIND: org-latex-image-default-width ".3\\linewidth"
--8<---------------cut here---------------end--------------->8---
with no success in async mode, but it works in synchronous mode. I guess
I'll avoid async mode for now on, or use a set of different
org-export-async-init.el files for different files.
Nevertheless I think it would make sense to have a way to set some
variables during async export. According to the Org Manual:
--8<---------------cut here---------------start------------->8---
Emacs variables can become buffer-local during export by using the BIND
keyword. Its syntax is ‘#+BIND: variable value’. This is particularly
useful for in-buffer settings that cannot be changed using keywords.
--8<---------------cut here---------------end--------------->8---
But the options set using #+ keywords are used during async export while
those set using #+BIND are ignored. A "+BIND-ASYNC would come in handy.
Julien.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2018-03-26 8:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-03-24 15:20 org-latex-image-default-width ignored Julien Cubizolles
2018-03-24 17:57 ` Eric S Fraga
2018-03-25 7:52 ` Julien Cubizolles
2018-03-25 11:56 ` Eric S Fraga
2018-03-26 8:39 ` Julien Cubizolles
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).