* New LaTeX exporter and source code blocks
@ 2012-05-05 19:53 Thomas S. Dye
2012-05-05 20:58 ` Nicolas Goaziou
0 siblings, 1 reply; 8+ messages in thread
From: Thomas S. Dye @ 2012-05-05 19:53 UTC (permalink / raw)
To: Org-mode
Aloha,
The new LaTeX exporter doesn't properly handle source code blocks with
:exports results. The following snippet exports correctly with the old
exporter.
---- Org-mode source ----
#+name: ACM-categories
#+header: :var c=categories
#+header: :results latex
#+header: :exports results
#+BEGIN_SRC emacs-lisp
(defun category-record (r)
(format "\\category{%s}{%s}{%s}[%s]"
(first r) (second r) (third r) (fourth r)))
(let ( (i (mapcar (lambda (row)
(category-record row))
(cdr (cdr c)))))
(mapconcat 'identity i "\n")
)
#+END_SRC
#+RESULTS: ACM-categories
#+BEGIN_LaTeX
\category{H.4}{Information Systems Applications}{Miscellaneous}[]
\category{D.2.8}{Software Engineering}{Metrics}[complexity measures, performance measures]
#+END_LaTeX
-------------------------
---- LaTeX output ----
\#+name: ACM-categories
\#+header: :var c=categories
\#+header: :results latex
\#+header: :exports results
----------------------
Also, the new exporter seems to skip over #+BEGIN_LaTeX ... #+END_LaTeX
blocks.
---- Org-mode source ----
#+BEGIN_LaTeX
\title{A Sample {\ttlit ACM} SIG Proceedings Paper in Org-mode Format\titlenote{(Does NOT produce the permission block, copyright information nor page numbering). For use with ACM\_PROC\_ARTICLE-SP.CLS. Supported by ACM.}}
\subtitle{[Extended Abstract]
\titlenote{A full version of this paper is available as
\textit{Author's Guide to Preparing ACM SIG Proceedings Using
\LaTeX$2_\epsilon$\ and BibTeX} at
\texttt{www.acm.org/eaddress.htm}}}
#+END_LaTeX
-------------------------
---- LaTeX output ----
----------------------
This is with the master branch pulled earlier today running on Emacs
23.4. My initialization file is at the bottom.
Let me know if I can provide more information.
All the best,
Tom
--
T.S. Dye & Colleagues, Archaeologists
735 Bishop St, Suite 315, Honolulu, HI 96813
Tel: 808-529-0866, Fax: 808-529-0884
http://www.tsdye.com
#+name: initialize-new-exporter
#+header: :tangle init-new.el
#+header: :results silent
#+header: :exports none
#+begin_src emacs-lisp
(add-to-list 'load-path "~/.emacs.d/src/org/contrib/lisp") ;; <- adjust
(add-to-list 'load-path "~/.emacs.d/src/org/lisp") ;; <- adjust
(add-to-list 'load-path "~/.emacs.d/src/org") ;; <- adjust
(require 'org-install)
(require 'org-export)
(require 'org-e-latex)
;; this line only required until the upcomming Org-mode/Emacs24 sync
(load "~/.emacs.d/src/org/lisp/org-exp-blocks.el")
;; Configure Babel to support all languages included in the manuscript
(org-babel-do-load-languages
'org-babel-load-languages
'((emacs-lisp . t)
(org . t)))
(setq org-confirm-babel-evaluate nil)
;; Configure Org-mode
(setq org-export-latex-hyperref-format "\\ref{%s}")
(setq org-entities-user nil)
(add-to-list 'org-entities-user '("space" "\\ " nil " " " " " " " "))
(setq org-e-latex-pdf-process '("texi2dvi --clean --verbose --batch %f"))
(setq org-export-latex-packages-alist nil)
(add-to-list 'org-export-latex-packages-alist '("" "hyperref"))
(add-to-list 'org-export-latex-packages-alist '("" "graphicx"))
(require 'org-special-blocks)
(org-add-link-type
"cite" nil
(lambda (path desc format)
(cond
((eq format 'latex)
(format "\\cite{%s}" path)))))
(org-add-link-type
"acm" nil
(lambda (path desc format)
(cond
((eq format 'latex)
(format "{\\%s{%s}}" path desc)))))
(add-to-list 'org-e-latex-classes
'("acm-proc-article-sp"
"\\documentclass{acm_proc_article-sp}
[NO-DEFAULT-PACKAGES]
[PACKAGES]
[EXTRA]"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}")
("\\paragraph{%s}" . "\\paragraph*{%s}")
("\\subparagraph{%s}" . "\\subparagraph*{%s}")))
#+end_src
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: New LaTeX exporter and source code blocks
2012-05-05 19:53 New LaTeX exporter and source code blocks Thomas S. Dye
@ 2012-05-05 20:58 ` Nicolas Goaziou
2012-05-05 21:32 ` Thomas S. Dye
0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2012-05-05 20:58 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: Org-mode
tsd@tsdye.com (Thomas S. Dye) writes:
> The new LaTeX exporter doesn't properly handle source code blocks with
> :exports results. The following snippet exports correctly with the old
> exporter.
>
> ---- Org-mode source ----
> #+name: ACM-categories
> #+header: :var c=categories
> #+header: :results latex
> #+header: :exports results
> #+BEGIN_SRC emacs-lisp
> (defun category-record (r)
> (format "\\category{%s}{%s}{%s}[%s]"
> (first r) (second r) (third r) (fourth r)))
> (let ( (i (mapcar (lambda (row)
> (category-record row))
> (cdr (cdr c)))))
> (mapconcat 'identity i "\n")
> )
> #+END_SRC
> #+RESULTS: ACM-categories
> #+BEGIN_LaTeX
> \category{H.4}{Information Systems Applications}{Miscellaneous}[]
> \category{D.2.8}{Software Engineering}{Metrics}[complexity measures, performance measures]
> #+END_LaTeX
> -------------------------
>
> ---- LaTeX output ----
> \#+name: ACM-categories
> \#+header: :var c=categories
> \#+header: :results latex
> \#+header: :exports results
> ----------------------
This is a known bug: affiliated keywords are left over if the block
disappears. It will be solved once org-element.el is merged into master
(see commit dec32064a72be7a20bbddcc1f8544a604619ad7b).
> Also, the new exporter seems to skip over #+BEGIN_LaTeX ... #+END_LaTeX
> blocks.
This is now fixed. Thank you.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: New LaTeX exporter and source code blocks
2012-05-05 20:58 ` Nicolas Goaziou
@ 2012-05-05 21:32 ` Thomas S. Dye
2012-05-05 21:37 ` Nicolas Goaziou
0 siblings, 1 reply; 8+ messages in thread
From: Thomas S. Dye @ 2012-05-05 21:32 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: Org-mode
Nicolas Goaziou <n.goaziou@gmail.com> writes:
> tsd@tsdye.com (Thomas S. Dye) writes:
>
>> The new LaTeX exporter doesn't properly handle source code blocks with
>> :exports results. The following snippet exports correctly with the old
>> exporter.
>>
>> ---- Org-mode source ----
>> #+name: ACM-categories
>> #+header: :var c=categories
>> #+header: :results latex
>> #+header: :exports results
>> #+BEGIN_SRC emacs-lisp
>> (defun category-record (r)
>> (format "\\category{%s}{%s}{%s}[%s]"
>> (first r) (second r) (third r) (fourth r)))
>> (let ( (i (mapcar (lambda (row)
>> (category-record row))
>> (cdr (cdr c)))))
>> (mapconcat 'identity i "\n")
>> )
>> #+END_SRC
>> #+RESULTS: ACM-categories
>> #+BEGIN_LaTeX
>> \category{H.4}{Information Systems Applications}{Miscellaneous}[]
>> \category{D.2.8}{Software Engineering}{Metrics}[complexity measures, performance measures]
>> #+END_LaTeX
>> -------------------------
>>
>> ---- LaTeX output ----
>> \#+name: ACM-categories
>> \#+header: :var c=categories
>> \#+header: :results latex
>> \#+header: :exports results
>> ----------------------
>
> This is a known bug: affiliated keywords are left over if the block
> disappears. It will be solved once org-element.el is merged into master
> (see commit dec32064a72be7a20bbddcc1f8544a604619ad7b).
>
Great. Looking forward to the merge.
>> Also, the new exporter seems to skip over #+BEGIN_LaTeX ... #+END_LaTeX
>> blocks.
>
> This is now fixed. Thank you.
Yes, LaTeX blocks are now exported. Thanks.
Here is a problem with CAPTION and ATTR_LaTeX lines. Note that the
\table{} environment wasn't established.
---- Org-mode ----
#+CAPTION: Frequency of Special Characters
#+ATTR_LaTeX: align=|c|c|l|
|---------------------+-------------+-------------------|
| Non-English or Math | Frequency | Comments |
|---------------------+-------------+-------------------|
| \O | 1 in 1,000 | For Swedish names |
|---------------------+-------------+-------------------|
| $\pi$ | 1 in 5 | Common in math |
|---------------------+-------------+-------------------|
| \$ | 4 in 5 | Used in business |
|---------------------+-------------+-------------------|
| $\Psi^2_1$ | 1 in 40,000 | Unexplained usage |
|---------------------+-------------+-------------------|
------------------
---- LaTeX export ----
\#+CAPTION: Some Typical Commands
\#+ATTR$_{\mathrm{\LaTeX{}}}$: table* align=|c|c|l|
\begin{center}
\begin{tabular}{}
\hline
Command & A Number & Comments\\
\hline
\texttt{\textbackslash{}alignauthor} & 100 & Author alignment\\
\hline
\texttt{\textbackslash{}numberofauthors} & 200 & Author enumeration\\
\hline
\texttt{\textbackslash{}table} & 300 & For tables\\
\hline
\texttt{\textbackslash{}table*} & 400 & For wider tables\\
\hline
\end{tabular}
\end{center}
----------------------
When #+CAPTION: is used with figures the \figure{} environment isn't
established.
---- Org-mode ----
#+CAPTION: A sample black and white graphic (.eps format).
[[file:fly.eps]]
------------------
---- LaTeX export ----
\#+CAPTION: A sample black and white graphic (.eps format).
\includegraphics[width=.9\linewidth]{fly.eps}
----------------------
All the best,
Tom
--
T.S. Dye & Colleagues, Archaeologists
735 Bishop St, Suite 315, Honolulu, HI 96813
Tel: 808-529-0866, Fax: 808-529-0884
http://www.tsdye.com
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: New LaTeX exporter and source code blocks
2012-05-05 21:32 ` Thomas S. Dye
@ 2012-05-05 21:37 ` Nicolas Goaziou
2012-05-05 22:55 ` Thomas S. Dye
0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2012-05-05 21:37 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: Org-mode
tsd@tsdye.com (Thomas S. Dye) writes:
> Here is a problem with CAPTION and ATTR_LaTeX lines. Note that the
> \table{} environment wasn't established.
>
> ---- Org-mode ----
> #+CAPTION: Frequency of Special Characters
> #+ATTR_LaTeX: align=|c|c|l|
>
> |---------------------+-------------+-------------------|
> | Non-English or Math | Frequency | Comments |
> |---------------------+-------------+-------------------|
> | \O | 1 in 1,000 | For Swedish names |
> |---------------------+-------------+-------------------|
> | $\pi$ | 1 in 5 | Common in math |
> |---------------------+-------------+-------------------|
> | \$ | 4 in 5 | Used in business |
> |---------------------+-------------+-------------------|
> | $\Psi^2_1$ | 1 in 40,000 | Unexplained usage |
> |---------------------+-------------+-------------------|
> ------------------
Affiliated keywords (#+name:, #+caption:, #+attr_...) are expected to be
right before their corresponding element. The blank line you introduced
is wrong. Remove and it should export fine.
> When #+CAPTION: is used with figures the \figure{} environment isn't
> established.
>
> ---- Org-mode ----
> #+CAPTION: A sample black and white graphic (.eps format).
>
> [[file:fly.eps]]
> ------------------
Ditto.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: New LaTeX exporter and source code blocks
2012-05-05 21:37 ` Nicolas Goaziou
@ 2012-05-05 22:55 ` Thomas S. Dye
2012-05-06 6:31 ` Nicolas Goaziou
0 siblings, 1 reply; 8+ messages in thread
From: Thomas S. Dye @ 2012-05-05 22:55 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: Org-mode
Nicolas Goaziou <n.goaziou@gmail.com> writes:
> tsd@tsdye.com (Thomas S. Dye) writes:
>
>> Here is a problem with CAPTION and ATTR_LaTeX lines. Note that the
>> \table{} environment wasn't established.
>>
>> ---- Org-mode ----
>> #+CAPTION: Frequency of Special Characters
>> #+ATTR_LaTeX: align=|c|c|l|
>>
>> |---------------------+-------------+-------------------|
>> | Non-English or Math | Frequency | Comments |
>> |---------------------+-------------+-------------------|
>> | \O | 1 in 1,000 | For Swedish names |
>> |---------------------+-------------+-------------------|
>> | $\pi$ | 1 in 5 | Common in math |
>> |---------------------+-------------+-------------------|
>> | \$ | 4 in 5 | Used in business |
>> |---------------------+-------------+-------------------|
>> | $\Psi^2_1$ | 1 in 40,000 | Unexplained usage |
>> |---------------------+-------------+-------------------|
>> ------------------
>
> Affiliated keywords (#+name:, #+caption:, #+attr_...) are expected to be
> right before their corresponding element. The blank line you introduced
> is wrong. Remove and it should export fine.
Yes, it does. Thanks.
I can't get a \begin{figure*} environment with multicolumn.
---- Org-mode ----
#+CAPTION: A sample black and white graphic (.eps format) that needs to span two columns of text.
#+ATTR_LaTeX: multicolumn
[[file:flies.eps]]
------------------
---- LaTeX export ----
\includegraphics[width=.9\linewidth]{flies.eps}
----------------------
All the best,
Tom
>
>> When #+CAPTION: is used with figures the \figure{} environment isn't
>> established.
>>
>> ---- Org-mode ----
>> #+CAPTION: A sample black and white graphic (.eps format).
>>
>> [[file:fly.eps]]
>> ------------------
>
> Ditto.
>
>
> Regards,
--
T.S. Dye & Colleagues, Archaeologists
735 Bishop St, Suite 315, Honolulu, HI 96813
Tel: 808-529-0866, Fax: 808-529-0884
http://www.tsdye.com
^ permalink raw reply [flat|nested] 8+ messages in thread* Re: New LaTeX exporter and source code blocks
2012-05-05 22:55 ` Thomas S. Dye
@ 2012-05-06 6:31 ` Nicolas Goaziou
2012-05-06 17:53 ` Thomas S. Dye
0 siblings, 1 reply; 8+ messages in thread
From: Nicolas Goaziou @ 2012-05-06 6:31 UTC (permalink / raw)
To: Thomas S. Dye; +Cc: Org-mode
Hello,
tsd@tsdye.com (Thomas S. Dye) writes:
> I can't get a \begin{figure*} environment with multicolumn.
>
> ---- Org-mode ----
> #+CAPTION: A sample black and white graphic (.eps format) that needs to span two columns of text.
> #+ATTR_LaTeX: multicolumn
> [[file:flies.eps]]
> ------------------
Indeed. This is fixed now. Thank you for your reports !
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2012-05-06 18:20 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-05-05 19:53 New LaTeX exporter and source code blocks Thomas S. Dye
2012-05-05 20:58 ` Nicolas Goaziou
2012-05-05 21:32 ` Thomas S. Dye
2012-05-05 21:37 ` Nicolas Goaziou
2012-05-05 22:55 ` Thomas S. Dye
2012-05-06 6:31 ` Nicolas Goaziou
2012-05-06 17:53 ` Thomas S. Dye
2012-05-06 18:17 ` Nicolas Goaziou
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).