* Org-babel init @ 2010-07-12 16:23 Jordi Inglada 2010-07-12 16:29 ` Richard Riley ` (3 more replies) 0 siblings, 4 replies; 9+ messages in thread From: Jordi Inglada @ 2010-07-12 16:23 UTC (permalink / raw) To: Emacs-orgmode Hi all, I am having the same problem as this user here: http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html and the contrib/lisp directory is indeed in my load path. I am using a git changeset cloned today (Org-mode version 6.34trans (release_6.36.608.gc1ef)). I have tried using "emacs -q" and then loading an .el file containing only the following lines: (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) (require 'org-install) (require 'org-babel-init) (require 'org-babel-python) and I get the same result. Thank you very much for your help. Jordi ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Org-babel init 2010-07-12 16:23 Org-babel init Jordi Inglada @ 2010-07-12 16:29 ` Richard Riley 2010-07-12 17:17 ` Eric Schulte 2010-07-12 17:07 ` Erik Iverson ` (2 subsequent siblings) 3 siblings, 1 reply; 9+ messages in thread From: Richard Riley @ 2010-07-12 16:29 UTC (permalink / raw) To: emacs-orgmode Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > Hi all, > > I am having the same problem as this user here: > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > and the contrib/lisp directory is indeed in my load path. > > I am using a git changeset cloned today (Org-mode version 6.34trans > (release_6.36.608.gc1ef)). > > I have tried using "emacs -q" and then loading an .el file containing > only the following lines: > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > (require 'org-install) > (require 'org-babel-init) > (require 'org-babel-python) > > and I get the same result. > > Thank you very much for your help. > > Jordi > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > I havent looked in detail but I recently had issues with it. Here is my init.el. No idea if its even relevant to be honest, but babel works for elisp files ;) --8<---------------cut here---------------start------------->8--- ;;; init.el --- Where all the magic begins ;; ;; This file loads both ;; - Org-mode : http://orgmode.org/ and ;; - Org-babel: http://orgmode.org/worg/org-contrib/babel/org-babel.php#library-of-babel ;; ;; It then loads the rest of our Emacs initialization from Emacs lisp ;; embedded in literate Org-mode files. ;; Load up Org Mode and Org Babel for elisp embedded in Org Mode files (setq dotfiles-dir (file-name-directory (or (buffer-file-name) load-file-name))) (let* ((org-dir (expand-file-name "lisp" (expand-file-name "org-mode" dotfiles-dir))) (org-contrib-dir (expand-file-name "lisp" (expand-file-name "contrib" (expand-file-name ".." org-dir)))) (load-path (append (list org-dir org-contrib-dir (concat org-dir "/babel")) (or load-path nil)))) ;; load up Org-mode and Org-babel (require 'org-install) (require 'ob-tangle) ) ;; load up all literate org-mode files in this directory ;;(mapc #'org-babel-load-file (directory-files dotfiles-dir t "\\.org$")) (org-babel-load-file "~/.emacs.d/emacs-init.org") ;;; init.el ends here --8<---------------cut here---------------end--------------->8--- Hopefully it helps. r. ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Re: Org-babel init 2010-07-12 16:29 ` Richard Riley @ 2010-07-12 17:17 ` Eric Schulte 0 siblings, 0 replies; 9+ messages in thread From: Eric Schulte @ 2010-07-12 17:17 UTC (permalink / raw) To: Richard Riley; +Cc: emacs-orgmode Hi Richard, You could probably safely simplify your config to something more like the following. http://github.com/eschulte/emacs-starter-kit/blob/master/init.el Cheers -- Eric Richard Riley <rileyrg@gmail.com> writes: > Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > >> Hi all, >> >> I am having the same problem as this user here: >> >> http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html >> >> and the contrib/lisp directory is indeed in my load path. >> >> I am using a git changeset cloned today (Org-mode version 6.34trans >> (release_6.36.608.gc1ef)). >> >> I have tried using "emacs -q" and then loading an .el file containing >> only the following lines: >> >> (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) >> (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) >> >> (require 'org-install) >> (require 'org-babel-init) >> (require 'org-babel-python) >> >> and I get the same result. >> >> Thank you very much for your help. >> >> Jordi >> >> _______________________________________________ >> Emacs-orgmode mailing list >> Please use `Reply All' to send replies to the list. >> Emacs-orgmode@gnu.org >> http://lists.gnu.org/mailman/listinfo/emacs-orgmode >> > > > I havent looked in detail but I recently had issues with it. Here is my > init.el. No idea if its even relevant to be honest, but babel works for > elisp files ;) > > > ;;; init.el --- Where all the magic begins > ;; > ;; This file loads both > ;; - Org-mode : http://orgmode.org/ and > ;; - Org-babel: http://orgmode.org/worg/org-contrib/babel/org-babel.php#library-of-babel > ;; > ;; It then loads the rest of our Emacs initialization from Emacs lisp > ;; embedded in literate Org-mode files. > > ;; Load up Org Mode and Org Babel for elisp embedded in Org Mode files > (setq dotfiles-dir (file-name-directory (or (buffer-file-name) load-file-name))) > > (let* ((org-dir (expand-file-name > "lisp" (expand-file-name > "org-mode" dotfiles-dir))) > (org-contrib-dir (expand-file-name > "lisp" (expand-file-name > "contrib" (expand-file-name > ".." org-dir)))) > (load-path (append (list org-dir org-contrib-dir (concat org-dir "/babel")) > (or load-path nil)))) > ;; load up Org-mode and Org-babel > (require 'org-install) > (require 'ob-tangle) > ) > > ;; load up all literate org-mode files in this directory > ;;(mapc #'org-babel-load-file (directory-files dotfiles-dir t "\\.org$")) > (org-babel-load-file "~/.emacs.d/emacs-init.org") > ;;; init.el ends here > > > Hopefully it helps. > > r. > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Org-babel init 2010-07-12 16:23 Org-babel init Jordi Inglada 2010-07-12 16:29 ` Richard Riley @ 2010-07-12 17:07 ` Erik Iverson 2010-07-12 17:15 ` Eric Schulte [not found] ` <2244855.24695.1278961524540.JavaMail.root@zm-cesbio-01> 3 siblings, 0 replies; 9+ messages in thread From: Erik Iverson @ 2010-07-12 17:07 UTC (permalink / raw) To: Jordi Inglada; +Cc: Emacs-orgmode You need to see: http://eschulte.github.com/babel-dev/DONE-document-configuration-changes-for-Babel-integration.html Jordi Inglada wrote: > Hi all, > > I am having the same problem as this user here: > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > and the contrib/lisp directory is indeed in my load path. > > I am using a git changeset cloned today (Org-mode version 6.34trans > (release_6.36.608.gc1ef)). > > I have tried using "emacs -q" and then loading an .el file containing > only the following lines: > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > (require 'org-install) > (require 'org-babel-init) > (require 'org-babel-python) > > and I get the same result. > > Thank you very much for your help. > > Jordi > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Org-babel init 2010-07-12 16:23 Org-babel init Jordi Inglada 2010-07-12 16:29 ` Richard Riley 2010-07-12 17:07 ` Erik Iverson @ 2010-07-12 17:15 ` Eric Schulte [not found] ` <2244855.24695.1278961524540.JavaMail.root@zm-cesbio-01> 3 siblings, 0 replies; 9+ messages in thread From: Eric Schulte @ 2010-07-12 17:15 UTC (permalink / raw) To: Jordi Inglada; +Cc: Emacs-orgmode Hi Jordi, With the latest Org-mode from Git, Org-babel is now part of Org-mode, so you no longer need to add the contrib directory to your load path, or require org-babel-init. The following should work for you. (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) (require 'org-install) (require 'ob-python) note that for a language-specific require, you now prefix the language name with ob- rather than org-babel- For more complete information on the new setup, see http://eschulte.github.com/babel-dev/DONE-document-configuration-changes-for-Babel-integration.html Cheers -- Eric Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > Hi all, > > I am having the same problem as this user here: > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > and the contrib/lisp directory is indeed in my load path. > > I am using a git changeset cloned today (Org-mode version 6.34trans > (release_6.36.608.gc1ef)). > > I have tried using "emacs -q" and then loading an .el file containing > only the following lines: > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > (require 'org-install) > (require 'org-babel-init) > (require 'org-babel-python) > > and I get the same result. > > Thank you very much for your help. > > Jordi > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <2244855.24695.1278961524540.JavaMail.root@zm-cesbio-01>]
* Re: Org-babel init [not found] ` <2244855.24695.1278961524540.JavaMail.root@zm-cesbio-01> @ 2010-07-12 20:53 ` Jordi Inglada 2010-07-12 20:58 ` Jordi Inglada ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Jordi Inglada @ 2010-07-12 20:53 UTC (permalink / raw) To: Eric Schulte; +Cc: Emacs-orgmode Eric, Thanks for the answer. If I do that using "emacs -q", I get this message when loading the configuration: "Symbol's value as variable is void: org-babel-tangle-lang-exts" An after that when trying to evaluate this block from the tutorial #+begin_src python import time print("Hello, today's date is %s" % time.ctime()) print('Two plus two is') return 2 + 2 #+end_src I get this other message: "org-babel-execute-src-block: No org-babel-execute function for python!" If I put the configuration in my .emacs, the error I get is: "org-babel-result-hash: Symbol's value as variable is void: org-babel-lob-one-liner-regexp" I guess I missed something. Thanks. Jordi Eric Schulte writes: > Hi Jordi, > > With the latest Org-mode from Git, Org-babel is now part of Org-mode, so > you no longer need to add the contrib directory to your load path, or > require org-babel-init. The following should work for you. > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > (require 'org-install) > (require 'ob-python) > > note that for a language-specific require, you now prefix the language > name with ob- rather than org-babel- > > For more complete information on the new setup, see > http://eschulte.github.com/babel-dev/DONE-document-configuration-changes-for-Babel-integration.html > > Cheers -- Eric > > Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > > > Hi all, > > > > I am having the same problem as this user here: > > > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > > > and the contrib/lisp directory is indeed in my load path. > > > > I am using a git changeset cloned today (Org-mode version 6.34trans > > (release_6.36.608.gc1ef)). > > > > I have tried using "emacs -q" and then loading an .el file containing > > only the following lines: > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > > > (require 'org-install) > > (require 'org-babel-init) > > (require 'org-babel-python) > > > > and I get the same result. > > > > Thank you very much for your help. > > > > Jordi > > > > _______________________________________________ > > Emacs-orgmode mailing list > > Please use `Reply All' to send replies to the list. > > Emacs-orgmode@gnu.org > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Org-babel init 2010-07-12 20:53 ` Jordi Inglada @ 2010-07-12 20:58 ` Jordi Inglada 2010-07-12 21:17 ` Eric Schulte [not found] ` <8956733.24699.1278969401734.JavaMail.root@zm-cesbio-01> 2 siblings, 0 replies; 9+ messages in thread From: Jordi Inglada @ 2010-07-12 20:58 UTC (permalink / raw) To: Emacs-orgmode [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #1: Type: text/plain; charset=utf-8, Size: 4236 bytes --] Just to complete my message, here is the debugger's output: Debugger entered--Lisp error: (void-variable org-babel-tangle-lang-exts) add-to-list(org-babel-tangle-lang-exts ("python" . "py")) byte-code("ÁÂ!ÁÃ!ÁÄ!ÁÅ!ÆÇÈ\"É\bB\x10ÊÉ!$\0ËÉÌ\"Ì" [current-load-list require ob ob-ref ob-comint ob-eval add-to-list org-babel-tangle-lang-exts ("python" . "py") org-babel-default-header-args:python default-boundp set-default nil] 3) require(ob-python) eval-buffer(#<buffer *load*> nil "/home/inglada/.emacs" nil t) ; Reading at buffer position 14626 load-with-code-conversion("/home/inglada/.emacs" "/home/inglada/.emacs" t t) load("~/.emacs" t t) #[nil "\b ´\0 Æ=\x11\0Ç\bÈQ7\0 É=3\0ÊÇËÌ##\0Í7\0ÊÇËÎ#/\0Ï7\0Í7\0Ç\bÐQ\x1aÑ\x13Ò\nÑ#\vÑ=_\0ÓÔÕÇ\bÖQ!\"\x1cÒ\fÑ#\vÑ=^\0\n\x13)\v¤\0×\v!ؤ\0Ù\v!\x1dÚP\x1e\"Û\x0e\"!\0\x0e\"\0Û\r!\0\r\0Ë\x15£\0Ü\r\v\"¡\0ÝÞ\r\v#ßà!\r\x13*\x0e#? ³\0Ë\x1e$ÒáÑ#))" [init-file-user system-type user-init-file-1 user-init-file otherfile source ms-dos "~" "/_emacs" windows-nt directory-files nil "^\\.emacs\\(\\.elc?\\)?$" "~/.emacs" "^_emacs\\(\\.elc?\\)?$" "~/_emacs" "/.emacs" t load expand-file-name "init" file-name-as-directory "/.emacs.d" file-name-extension "elc" file-name-sans-extension ".el" file-exists-p file-newer-than-file-p message "Warning: %s is newer than %s" sit-for 1 "default" alt inhibit-default-init inhibit-startup-screen] 7]() command-line() normal-top-level() Jordi Jordi Inglada writes: > Eric, > > Thanks for the answer. > > If I do that using "emacs -q", I get this message when loading the > configuration: > > "Symbol's value as variable is void: org-babel-tangle-lang-exts" > > An after that when trying to evaluate this block from the tutorial > > #+begin_src python > import time > print("Hello, today's date is %s" % time.ctime()) > print('Two plus two is') > return 2 + 2 > #+end_src > > I get this other message: > > "org-babel-execute-src-block: No org-babel-execute function for python!" > > If I put the configuration in my .emacs, the error I get is: > > "org-babel-result-hash: Symbol's value as variable is void: org-babel-lob-one-liner-regexp" > > I guess I missed something. > > Thanks. > > Jordi > > Eric Schulte writes: > > Hi Jordi, > > > > With the latest Org-mode from Git, Org-babel is now part of Org-mode, so > > you no longer need to add the contrib directory to your load path, or > > require org-babel-init. The following should work for you. > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > (require 'org-install) > > (require 'ob-python) > > > > note that for a language-specific require, you now prefix the language > > name with ob- rather than org-babel- > > > > For more complete information on the new setup, see > > http://eschulte.github.com/babel-dev/DONE-document-configuration-changes-for-Babel-integration.html > > > > Cheers -- Eric > > > > Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > > > > > Hi all, > > > > > > I am having the same problem as this user here: > > > > > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > > > > > and the contrib/lisp directory is indeed in my load path. > > > > > > I am using a git changeset cloned today (Org-mode version 6.34trans > > > (release_6.36.608.gc1ef)). > > > > > > I have tried using "emacs -q" and then loading an .el file containing > > > only the following lines: > > > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > > > > > (require 'org-install) > > > (require 'org-babel-init) > > > (require 'org-babel-python) > > > > > > and I get the same result. > > > > > > Thank you very much for your help. > > > > > > Jordi > > > > > > _______________________________________________ > > > Emacs-orgmode mailing list > > > Please use `Reply All' to send replies to the list. > > > Emacs-orgmode@gnu.org > > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > [-- Attachment #2: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Org-babel init 2010-07-12 20:53 ` Jordi Inglada 2010-07-12 20:58 ` Jordi Inglada @ 2010-07-12 21:17 ` Eric Schulte [not found] ` <8956733.24699.1278969401734.JavaMail.root@zm-cesbio-01> 2 siblings, 0 replies; 9+ messages in thread From: Eric Schulte @ 2010-07-12 21:17 UTC (permalink / raw) To: Jordi Inglada; +Cc: Emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 297 bytes --] Hi Jordi, The attached simple-init.el file works for me with emacs -Q -l simple-init.el Emacs started w/o error, and I was able to evaluate python code blocks with no problem. Please give it a try and let me know if it doesn't work -- Eric (note you'll have to update the path to org/lisp) [-- Attachment #2: simple-init.el --] [-- Type: application/emacs-lisp, Size: 170 bytes --] [-- Attachment #3: Type: text/plain, Size: 2669 bytes --] Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > Eric, > > Thanks for the answer. > > If I do that using "emacs -q", I get this message when loading the > configuration: > > "Symbol's value as variable is void: org-babel-tangle-lang-exts" > > An after that when trying to evaluate this block from the tutorial > > #+begin_src python > import time > print("Hello, today's date is %s" % time.ctime()) > print('Two plus two is') > return 2 + 2 > #+end_src > > I get this other message: > > "org-babel-execute-src-block: No org-babel-execute function for python!" > > If I put the configuration in my .emacs, the error I get is: > > "org-babel-result-hash: Symbol's value as variable is void: org-babel-lob-one-liner-regexp" > > I guess I missed something. > > Thanks. > > Jordi > > Eric Schulte writes: > > Hi Jordi, > > > > With the latest Org-mode from Git, Org-babel is now part of Org-mode, so > > you no longer need to add the contrib directory to your load path, or > > require org-babel-init. The following should work for you. > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > (require 'org-install) > > (require 'ob-python) > > > > note that for a language-specific require, you now prefix the language > > name with ob- rather than org-babel- > > > > For more complete information on the new setup, see > > http://eschulte.github.com/babel-dev/DONE-document-configuration-changes-for-Babel-integration.html > > > > Cheers -- Eric > > > > Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > > > > > Hi all, > > > > > > I am having the same problem as this user here: > > > > > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > > > > > and the contrib/lisp directory is indeed in my load path. > > > > > > I am using a git changeset cloned today (Org-mode version 6.34trans > > > (release_6.36.608.gc1ef)). > > > > > > I have tried using "emacs -q" and then loading an .el file containing > > > only the following lines: > > > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > > > > > (require 'org-install) > > > (require 'org-babel-init) > > > (require 'org-babel-python) > > > > > > and I get the same result. > > > > > > Thank you very much for your help. > > > > > > Jordi > > > > > > _______________________________________________ > > > Emacs-orgmode mailing list > > > Please use `Reply All' to send replies to the list. > > > Emacs-orgmode@gnu.org > > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode [-- Attachment #4: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <8956733.24699.1278969401734.JavaMail.root@zm-cesbio-01>]
* Re: Org-babel init [not found] ` <8956733.24699.1278969401734.JavaMail.root@zm-cesbio-01> @ 2010-07-13 7:01 ` Jordi Inglada 0 siblings, 0 replies; 9+ messages in thread From: Jordi Inglada @ 2010-07-13 7:01 UTC (permalink / raw) To: Eric Schulte; +Cc: Emacs-orgmode Hi Eric, That worked. I am ready to go now! Thank you! Jordi Eric Schulte writes: > Hi Jordi, > > The attached simple-init.el file works for me with > > emacs -Q -l simple-init.el > > Emacs started w/o error, and I was able to evaluate python code blocks > with no problem. > > Please give it a try and let me know if it doesn't work -- Eric > > (note you'll have to update the path to org/lisp) > xapplication/emacs-lisp [Click mouse-2 to save to a file] > > Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > > > Eric, > > > > Thanks for the answer. > > > > If I do that using "emacs -q", I get this message when loading the > > configuration: > > > > "Symbol's value as variable is void: org-babel-tangle-lang-exts" > > > > An after that when trying to evaluate this block from the tutorial > > > > #+begin_src python > > import time > > print("Hello, today's date is %s" % time.ctime()) > > print('Two plus two is') > > return 2 + 2 > > #+end_src > > > > I get this other message: > > > > "org-babel-execute-src-block: No org-babel-execute function for python!" > > > > If I put the configuration in my .emacs, the error I get is: > > > > "org-babel-result-hash: Symbol's value as variable is void: org-babel-lob-one-liner-regexp" > > > > I guess I missed something. > > > > Thanks. > > > > Jordi > > > > Eric Schulte writes: > > > Hi Jordi, > > > > > > With the latest Org-mode from Git, Org-babel is now part of Org-mode, so > > > you no longer need to add the contrib directory to your load path, or > > > require org-babel-init. The following should work for you. > > > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > > (require 'org-install) > > > (require 'ob-python) > > > > > > note that for a language-specific require, you now prefix the language > > > name with ob- rather than org-babel- > > > > > > For more complete information on the new setup, see > > > http://eschulte.github.com/babel-dev/DONE-document-configuration-changes-for-Babel-integration.html > > > > > > Cheers -- Eric > > > > > > Jordi Inglada <jordi.inglada@cesbio.cnes.fr> writes: > > > > > > > Hi all, > > > > > > > > I am having the same problem as this user here: > > > > > > > > http://www.mail-archive.com/emacs-orgmode@gnu.org/msg17498.html > > > > > > > > and the contrib/lisp directory is indeed in my load path. > > > > > > > > I am using a git changeset cloned today (Org-mode version 6.34trans > > > > (release_6.36.608.gc1ef)). > > > > > > > > I have tried using "emacs -q" and then loading an .el file containing > > > > only the following lines: > > > > > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/lisp" load-path)) > > > > (setq load-path (cons "/home/inglada/local/src/org-mode/contrib/lisp" load-path)) > > > > > > > > (require 'org-install) > > > > (require 'org-babel-init) > > > > (require 'org-babel-python) > > > > > > > > and I get the same result. > > > > > > > > Thank you very much for your help. > > > > > > > > Jordi > > > > > > > > _______________________________________________ > > > > Emacs-orgmode mailing list > > > > Please use `Reply All' to send replies to the list. > > > > Emacs-orgmode@gnu.org > > > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-07-13 7:01 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-07-12 16:23 Org-babel init Jordi Inglada 2010-07-12 16:29 ` Richard Riley 2010-07-12 17:17 ` Eric Schulte 2010-07-12 17:07 ` Erik Iverson 2010-07-12 17:15 ` Eric Schulte [not found] ` <2244855.24695.1278961524540.JavaMail.root@zm-cesbio-01> 2010-07-12 20:53 ` Jordi Inglada 2010-07-12 20:58 ` Jordi Inglada 2010-07-12 21:17 ` Eric Schulte [not found] ` <8956733.24699.1278969401734.JavaMail.root@zm-cesbio-01> 2010-07-13 7:01 ` Jordi Inglada
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).