* Creating a (RabbitMQ) diagram
@ 2019-10-17 11:01 Cecil Westerhof
2019-10-17 11:12 ` PICCA Frederic-Emmanuel
0 siblings, 1 reply; 8+ messages in thread
From: Cecil Westerhof @ 2019-10-17 11:01 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1.1: Type: text/plain, Size: 662 bytes --]
I need to give a workshop where I have to display a lot of diagrams. For
example something like the added RabbitMQ diagram.
I understood that this would be relatively easy with org-mode. (It does not
have to be as fancy. It is mostly to visualise the functionalities.)
I create my presentation with LaTeX Beamer (what I am also learning at the
moment). So it would be nice if I could generate code that can be included
in LaTeX, but just png-files are also acceptable.
What is the best way to take this on? I need to generate quit a few
diagrams and while I have worked with org-mode, I do not have much
experience with creating graphics.
--
Cecil Westerhof
[-- Attachment #1.2: Type: text/html, Size: 1310 bytes --]
[-- Attachment #2: rabbitmq.png --]
[-- Type: image/png, Size: 138292 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-17 11:01 Creating a (RabbitMQ) diagram Cecil Westerhof
@ 2019-10-17 11:12 ` PICCA Frederic-Emmanuel
2019-10-17 11:40 ` Ken Mankoff
2019-10-17 20:03 ` Marcin Borkowski
0 siblings, 2 replies; 8+ messages in thread
From: PICCA Frederic-Emmanuel @ 2019-10-17 11:12 UTC (permalink / raw)
To: Cecil Westerhof, emacs-orgmode@gnu.org
https://en.wikipedia.org/wiki/PGF/TikZ
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-17 11:12 ` PICCA Frederic-Emmanuel
@ 2019-10-17 11:40 ` Ken Mankoff
2019-10-17 13:21 ` Cecil Westerhof
2019-10-17 14:01 ` Cecil Westerhof
2019-10-17 20:03 ` Marcin Borkowski
1 sibling, 2 replies; 8+ messages in thread
From: Ken Mankoff @ 2019-10-17 11:40 UTC (permalink / raw)
To: PICCA Frederic-Emmanuel; +Cc: Cecil Westerhof, emacs-orgmode@gnu.org
On 2019-10-17 at 13:12 +02, PICCA Frederic-Emmanuel <frederic-emmanuel.picca@synchrotron-soleil.fr> wrote...
> https://en.wikipedia.org/wiki/PGF/TikZ
Or you can do it with Ditaa, http://plantuml.com, others that may be easier to use than TikZ.
-k.
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-17 11:40 ` Ken Mankoff
@ 2019-10-17 13:21 ` Cecil Westerhof
2019-10-18 9:45 ` Fraga, Eric
2019-10-17 14:01 ` Cecil Westerhof
1 sibling, 1 reply; 8+ messages in thread
From: Cecil Westerhof @ 2019-10-17 13:21 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1033 bytes --]
Op do 17 okt. 2019 om 13:40 schreef Ken Mankoff <mankoff@gmail.com>:
>
> On 2019-10-17 at 13:12 +02, PICCA Frederic-Emmanuel <
> frederic-emmanuel.picca@synchrotron-soleil.fr> wrote...
> > https://en.wikipedia.org/wiki/PGF/TikZ
>
> Or you can do it with Ditaa, http://plantuml.com, others that may be
> easier to use than TikZ.
>
I tried it out (after a bit of configuring) with the following:
#+BEGIN_SRC plantuml :file groupingComponents.eps :noexport
@startuml
package "Some Group" {
HTTP - [First Component]
[Another Component]
}
node "Other Groups" {
FTP - [Second Component]
[First Component] --> FTP
}
cloud {
[Example 1]
}
database "MySql" {
folder "This is my folder" {
[Folder 3]
}
frame "Foo" {
[Frame 4]
}
}
[Another Component] --> [Example 1]
[Example 1] --> [Folder 3]
[Folder 3] --> [Frame 4]
@enduml
#+END_SRC
It looks a bit different, but I will not worry about it at the moment.
Is it best to save it as eps, or better another format? (When using it with
LaTeX.)
--
Cecil Westerhof
[-- Attachment #2: Type: text/html, Size: 2492 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-17 11:40 ` Ken Mankoff
2019-10-17 13:21 ` Cecil Westerhof
@ 2019-10-17 14:01 ` Cecil Westerhof
1 sibling, 0 replies; 8+ messages in thread
From: Cecil Westerhof @ 2019-10-17 14:01 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 808 bytes --]
Op do 17 okt. 2019 om 13:40 schreef Ken Mankoff <mankoff@gmail.com>:
>
> On 2019-10-17 at 13:12 +02, PICCA Frederic-Emmanuel <
> frederic-emmanuel.picca@synchrotron-soleil.fr> wrote...
> > https://en.wikipedia.org/wiki/PGF/TikZ
>
> Or you can do it with Ditaa, http://plantuml.com, others that may be
> easier to use than TikZ.
>
It is not perfect, but for the moment good enough:
#+BEGIN_SRC plantuml :file rabbitMQ.eps :noexport
@startuml
[Producer]
cloud {
[Internet] as Internet1
}
node RabbitMQ {
[Exchange]
[Queue]
}
cloud {
[Internet] as Internet2
}
[Consumer]
[Producer] -> [Internet1] : Publish
[Internet1] -> [Exchange] : Publish
[Exchange] -> [Queue] : Route
[Queue] -> [Internet2] : Consume
[Internet2] -> [Consumer] : Consume
@enduml
#+END_SRC
--
Cecil Westerhof
[-- Attachment #2: Type: text/html, Size: 1735 bytes --]
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-17 11:12 ` PICCA Frederic-Emmanuel
2019-10-17 11:40 ` Ken Mankoff
@ 2019-10-17 20:03 ` Marcin Borkowski
1 sibling, 0 replies; 8+ messages in thread
From: Marcin Borkowski @ 2019-10-17 20:03 UTC (permalink / raw)
To: PICCA Frederic-Emmanuel; +Cc: Cecil Westerhof, emacs-orgmode@gnu.org
On 2019-10-17, at 13:12, PICCA Frederic-Emmanuel <frederic-emmanuel.picca@synchrotron-soleil.fr> wrote:
> https://en.wikipedia.org/wiki/PGF/TikZ
+1
--
Marcin Borkowski
http://mbork.pl
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-17 13:21 ` Cecil Westerhof
@ 2019-10-18 9:45 ` Fraga, Eric
2019-10-19 8:50 ` Michael Welle
0 siblings, 1 reply; 8+ messages in thread
From: Fraga, Eric @ 2019-10-18 9:45 UTC (permalink / raw)
To: Cecil Westerhof; +Cc: emacs-orgmode@gnu.org
On Thursday, 17 Oct 2019 at 15:21, Cecil Westerhof wrote:
> I tried it out (after a bit of configuring) with the following:
>
> #+BEGIN_SRC plantuml :file groupingComponents.eps :noexport
[...]
> It looks a bit different, but I will not worry about it at the moment.
I use the following tools within org for eventual export to PDF via
latex: tikz, ditaa, graphviz (dot, neato, ...), & plantuml. I've even
bee known to use LaTeX's own picture environmnt. They each have
different advantages and disadvantages but all work well with org in my
opinion.
> Is it best to save it as eps, or better another format? (When using it with
> LaTeX.)
I would save as PDF, whenever possible.
--
Eric S Fraga via Emacs 27.0.50, Org release_9.2.6-544-gd215c3
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Creating a (RabbitMQ) diagram
2019-10-18 9:45 ` Fraga, Eric
@ 2019-10-19 8:50 ` Michael Welle
0 siblings, 0 replies; 8+ messages in thread
From: Michael Welle @ 2019-10-19 8:50 UTC (permalink / raw)
To: emacs-orgmode
Hello,
"Fraga, Eric" <e.fraga@ucl.ac.uk> writes:
> On Thursday, 17 Oct 2019 at 15:21, Cecil Westerhof wrote:
>> I tried it out (after a bit of configuring) with the following:
>>
>> #+BEGIN_SRC plantuml :file groupingComponents.eps :noexport
>
> [...]
>
>> It looks a bit different, but I will not worry about it at the moment.
>
> I use the following tools within org for eventual export to PDF via
> latex: tikz, ditaa, graphviz (dot, neato, ...), & plantuml. I've even
> bee known to use LaTeX's own picture environmnt. They each have
> different advantages and disadvantages but all work well with org in my
> opinion.
so think and do I. At the moment I try to consolidate the tools I use
and try to get away with tikz only. I tried to reproduce same diagrams I
created with plantuml. Well, it works. But there are a lot of details in
plantuml's output that you have to do manually with tikz. BTW, I just
discovered that plantuml's pdf output is way different from its LaTeX
output.
Regards
hmw
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-10-19 8:51 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-17 11:01 Creating a (RabbitMQ) diagram Cecil Westerhof
2019-10-17 11:12 ` PICCA Frederic-Emmanuel
2019-10-17 11:40 ` Ken Mankoff
2019-10-17 13:21 ` Cecil Westerhof
2019-10-18 9:45 ` Fraga, Eric
2019-10-19 8:50 ` Michael Welle
2019-10-17 14:01 ` Cecil Westerhof
2019-10-17 20:03 ` Marcin Borkowski
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).