* Howto install from git under XEmacs
@ 2009-11-13 0:00 Andreas Goesele
2009-11-13 13:01 ` Carsten Dominik
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Goesele @ 2009-11-13 0:00 UTC (permalink / raw)
To: emacs-orgmode
Hi,
because of a problem with latex export I wanted to switch to version 6.32trans.
I didn't have any problem to do so for Emacs. But if I change the binary from
emacs to xemacs in the Makefile, do make install-noutline, make and make
install, put the resulting files under /usr/local into the right place under
/usr/share and then start XEmacs I get:
"symbol's value as variable is void: bol"
The same procedure (with emacs in the Makefile and without make
install-noutline) works fine with emacs.
What am I missing?
Thanks!
Andreas Gösele
--
Omnis enim res, quae dando non deficit, dum habetur et non datur,
nondum habetur, quomodo habenda est.
Augustinus, De doctrina christiana
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Howto install from git under XEmacs
2009-11-13 0:00 Howto install from git under XEmacs Andreas Goesele
@ 2009-11-13 13:01 ` Carsten Dominik
2009-11-13 23:36 ` Howto install from git under XEmacs (org-freemind problem) Andreas Gösele
0 siblings, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2009-11-13 13:01 UTC (permalink / raw)
To: Andreas Goesele; +Cc: emacs-orgmode
On Nov 13, 2009, at 1:00 AM, Andreas Goesele wrote:
> Hi,
>
> because of a problem with latex export I wanted to switch to version
> 6.32trans.
> I didn't have any problem to do so for Emacs. But if I change the
> binary from
> emacs to xemacs in the Makefile, do make install-noutline, make and
> make
> install, put the resulting files under /usr/local into the right
> place under
> /usr/share and then start XEmacs I get:
>
> "symbol's value as variable is void: bol"
>
> The same procedure (with emacs in the Makefile and without make
> install-noutline) works fine with emacs.
>
> What am I missing?
I don't know what you are missing, but your Email is missing a
backtrace.
- Carsten
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Howto install from git under XEmacs (org-freemind problem)
2009-11-13 13:01 ` Carsten Dominik
@ 2009-11-13 23:36 ` Andreas Gösele
2009-11-15 11:17 ` Carsten Dominik
0 siblings, 1 reply; 6+ messages in thread
From: Andreas Gösele @ 2009-11-13 23:36 UTC (permalink / raw)
To: emacs-orgmode
Carsten Dominik <carsten.dominik <at> gmail.com> writes:
> I don't know what you are missing, but your Email is missing a
> backtrace.
Well, xemacs -debug-init didn't give one. But I now tried manually to evaluate
the org-mode related lines in my init.el and the offending line was:
(require 'org-freemind)
Debugger entered--Lisp error: (void-variable bol)
byte-code("..." [eol nonl space bol current-load-list
org-freemind-node-pattern default-boundp set-default rx submatch "*" *\?] 9)
load-internal("org-freemind" nil t nil binary)
load("org-freemind" nil t nil)
require(org-freemind)
eval((require (quote org-freemind)))
eval-interactive((require (quote org-freemind)))
eval-last-sexp(nil)
call-interactively(eval-last-sexp)
I think I don't need that line in my init.el. But without it, trying to use for
instance org-freemind-to-org-mode gives:
Debugger entered--Lisp error: (void-variable bol)
byte-code("..." [eol nonl space bol current-load-list
org-freemind-node-pattern default-boundp set-default rx submatch "*" *\?] 9)
load-internal("org-freemind" nil nil nil binary)
load("org-freemind" nil nil nil)
command-execute(org-freemind-to-org-mode t)
execute-extended-command(nil)
call-interactively(execute-extended-command)
Thanks again!
Andreas Gösele
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Re: Howto install from git under XEmacs (org-freemind problem)
2009-11-13 23:36 ` Howto install from git under XEmacs (org-freemind problem) Andreas Gösele
@ 2009-11-15 11:17 ` Carsten Dominik
2009-11-15 11:41 ` Lennart Borgman
0 siblings, 1 reply; 6+ messages in thread
From: Carsten Dominik @ 2009-11-15 11:17 UTC (permalink / raw)
To: Andreas Gösele, Lennart Borgman; +Cc: org-mode mailing list
Hi Andreas, thanks for the additional information.
It seems that Lennart is using calls to `rx' to make his regular
expressions, and that function does not seem to exist in your XEmacs
installation.
I believe all these rx calls could be just substituted by a regexp
string.
Maybe you can contact Lennart about this issue?
I am putting him into the CC.
And I have no idea if there will be additional issues with XEmacs
compatibility
with this new module.
- Carsten
On Nov 14, 2009, at 12:36 AM, Andreas Gösele wrote:
> Carsten Dominik <carsten.dominik <at> gmail.com> writes:
>
>> I don't know what you are missing, but your Email is missing a
>> backtrace.
>
> Well, xemacs -debug-init didn't give one. But I now tried manually
> to evaluate
> the org-mode related lines in my init.el and the offending line was:
>
> (require 'org-freemind)
>
> Debugger entered--Lisp error: (void-variable bol)
> byte-code("..." [eol nonl space bol current-load-list
> org-freemind-node-pattern default-boundp set-default rx submatch "*"
> *\?] 9)
> load-internal("org-freemind" nil t nil binary)
> load("org-freemind" nil t nil)
> require(org-freemind)
> eval((require (quote org-freemind)))
> eval-interactive((require (quote org-freemind)))
> eval-last-sexp(nil)
> call-interactively(eval-last-sexp)
>
> I think I don't need that line in my init.el. But without it, trying
> to use for
> instance org-freemind-to-org-mode gives:
>
> Debugger entered--Lisp error: (void-variable bol)
> byte-code("..." [eol nonl space bol current-load-list
> org-freemind-node-pattern default-boundp set-default rx submatch "*"
> *\?] 9)
> load-internal("org-freemind" nil nil nil binary)
> load("org-freemind" nil nil nil)
> command-execute(org-freemind-to-org-mode t)
> execute-extended-command(nil)
> call-interactively(execute-extended-command)
>
> Thanks again!
>
> Andreas Gösele
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
- Carsten
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Re: Howto install from git under XEmacs (org-freemind problem)
2009-11-15 11:17 ` Carsten Dominik
@ 2009-11-15 11:41 ` Lennart Borgman
2009-11-24 15:30 ` Andreas Goesele
0 siblings, 1 reply; 6+ messages in thread
From: Lennart Borgman @ 2009-11-15 11:41 UTC (permalink / raw)
To: Carsten Dominik; +Cc: org-mode mailing list, Andreas Gösele
Thanks, I have seen this. Is not rx available at all in XEmacs?
On Sun, Nov 15, 2009 at 12:17 PM, Carsten Dominik
<carsten.dominik@gmail.com> wrote:
>
> Hi Andreas, thanks for the additional information.
>
> It seems that Lennart is using calls to `rx' to make his regular
> expressions, and that function does not seem to exist in your XEmacs
> installation.
>
> I believe all these rx calls could be just substituted by a regexp string.
> Maybe you can contact Lennart about this issue?
>
> I am putting him into the CC.
>
> And I have no idea if there will be additional issues with XEmacs
> compatibility
> with this new module.
>
> - Carsten
>
> On Nov 14, 2009, at 12:36 AM, Andreas Gösele wrote:
>
>> Carsten Dominik <carsten.dominik <at> gmail.com> writes:
>>
>>> I don't know what you are missing, but your Email is missing a
>>> backtrace.
>>
>> Well, xemacs -debug-init didn't give one. But I now tried manually to
>> evaluate
>> the org-mode related lines in my init.el and the offending line was:
>>
>> (require 'org-freemind)
>>
>> Debugger entered--Lisp error: (void-variable bol)
>> byte-code("..." [eol nonl space bol current-load-list
>> org-freemind-node-pattern default-boundp set-default rx submatch "*" *\?]
>> 9)
>> load-internal("org-freemind" nil t nil binary)
>> load("org-freemind" nil t nil)
>> require(org-freemind)
>> eval((require (quote org-freemind)))
>> eval-interactive((require (quote org-freemind)))
>> eval-last-sexp(nil)
>> call-interactively(eval-last-sexp)
>>
>> I think I don't need that line in my init.el. But without it, trying to
>> use for
>> instance org-freemind-to-org-mode gives:
>>
>> Debugger entered--Lisp error: (void-variable bol)
>> byte-code("..." [eol nonl space bol current-load-list
>> org-freemind-node-pattern default-boundp set-default rx submatch "*" *\?]
>> 9)
>> load-internal("org-freemind" nil nil nil binary)
>> load("org-freemind" nil nil nil)
>> command-execute(org-freemind-to-org-mode t)
>> execute-extended-command(nil)
>> call-interactively(execute-extended-command)
>>
>> Thanks again!
>>
>> Andreas Gösele
>
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
> - Carsten
>
>
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: Re: Howto install from git under XEmacs (org-freemind problem)
2009-11-15 11:41 ` Lennart Borgman
@ 2009-11-24 15:30 ` Andreas Goesele
0 siblings, 0 replies; 6+ messages in thread
From: Andreas Goesele @ 2009-11-24 15:30 UTC (permalink / raw)
To: Lennart Borgman
Cc: org-mode mailing list, Andreas Gösele, Carsten Dominik
Lennart Borgman <lennart.borgman@gmail.com> writes:
> Thanks, I have seen this. Is not rx available at all in XEmacs?
It isn't AFAIK.
What I don't understand: As rx is not available I had put rx.el from
Emacs into my path and require it in my init.el.
With freemind.el 0.58 this worked under org-mode 6.21b and for
freemind-to-org-mode also under 6.32trans and 6.33trans. With the
org-freemind.el included in org-mode 6.32trans and 6.33trans it
doesn't work.
Unfortunately thinks do not stop here: Neither freemind-from-org-mode
nor org-freemind-from-org-mode work now under 6.33trans. I get an
error I had with freemind.el 0.57:
Debugger entered--Lisp error: (wrong-type-argument stringp nil)
string-match("TODO" nil)
(if (string-match "TODO" this-m2) (progn (setq this-m2 ...) (add-to-list ... "button_cancel") (setq this-bg-color "#ffff88") (when ... ...)))
(when (string-match "TODO" this-m2) (setq this-m2 (replace-match "" nil nil this-m2)) (add-to-list (quote this-icons) "button_cancel") (setq this-bg-color "#ffff88") (when (string-match "\\[#\\(.\\)\\]" this-m2) (let ... ... ...)))
(let* (this-icons this-bg-color this-m2-escaped this-rich-node this-rich-note) (when (string-match "TODO" this-m2) (setq this-m2 ...) (add-to-list ... "button_cancel") (setq this-bg-color "#ffff88") (when ... ...)) (setq this-m2 (org-trim this-m2)) (setq this-m2-escaped (freemind-escape-str-from-org this-m2)) (let (...) (setq this-rich-node ...) (setq this-rich-note ...)) (with-current-buffer mm-buffer (insert "<node text=\"" this-m2-escaped "\"") (freemind-get-node-style this-m2) (when ... ...) (when ... ... ...) (when this-bg-color ...) (insert ">\n") (when this-icons ...)) (with-current-buffer mm-buffer (when this-rich-note ...) (when this-rich-node ...)))
freemind-write-node()
(let (this-m2 this-node-end this-children-visible next-m2 next-level next-has-some-visible-child next-children-visible) (while (and ... ...) (let* ... ... ... ... ... ... ... ... ... ... ... ... ...)) (setq this-m2 next-m2) (setq current-level next-level) (setq next-node-start (if node-at-line-last ... ...)) (freemind-write-node) (with-current-buffer mm-buffer (insert "</node>\n")))
(save-excursion (goto-char (point-min)) (while (re-search-forward ... nil t) (let ... ...)) (setq drawers-regexp (concat ... ... ...)) (if node-at-line (progn ... ... ... ... ... ... ... ...) (goto-char ...) (while ... ...) (goto-char ...) (when ... ... ... ...)) (setq num-left-nodes (floor num-top2-nodes 2)) (setq base-level current-level) (let (this-m2 this-node-end this-children-visible next-m2 next-level next-has-some-visible-child next-children-visible) (while ... ...) (setq this-m2 next-m2) (setq current-level next-level) (setq next-node-start ...) (freemind-write-node) (with-current-buffer mm-buffer ...)) (with-current-buffer mm-buffer (while ... ... ...)) (with-current-buffer mm-buffer (insert "</map>") (delete-trailing-whitespace) (goto-char ...)))
(let* ((drawers ...) drawers-regexp (node-pattern ...) (num-top1-nodes 0) (num-top2-nodes 0) num-left-nodes (unclosed-nodes 0) (first-time t) (current-level 1) base-level prev-node-end rich-text unfinished-tag node-at-line-level node-at-line-last) (with-current-buffer mm-buffer (erase-buffer) (insert "<?xml version=\"1.0\" encoding=\"utf-8\"?>\n") (insert "<map version=\"0.9.0\">\n") (insert "<!-- To view this file, download free mind mapping software FreeMind from http://freemind.sourceforge.net -->\n")) (save-excursion (goto-char ...) (while ... ...) (setq drawers-regexp ...) (if node-at-line ... ... ... ... ...) (setq num-left-nodes ...) (setq base-level current-level) (let ... ... ... ... ... ... ...) (with-current-buffer mm-buffer ...) (with-current-buffer mm-buffer ... ... ...)))
(progn (let* (... drawers-regexp ... ... ... num-left-nodes ... ... ... base-level prev-node-end rich-text unfinished-tag node-at-line-level node-at-line-last) (with-current-buffer mm-buffer ... ... ... ...) (save-excursion ... ... ... ... ... ... ... ... ...)))
(unwind-protect (progn (let* ... ... ...)) (store-match-data match-data))
(let ((match-data ...)) (unwind-protect (progn ...) (store-match-data match-data)))
(save-match-data (let* (... drawers-regexp ... ... ... num-left-nodes ... ... ... base-level prev-node-end rich-text unfinished-tag node-at-line-level node-at-line-last) (with-current-buffer mm-buffer ... ... ... ...) (save-excursion ... ... ... ... ... ... ... ... ...)))
(save-current-buffer (set-buffer org-buffer) (dolist (node-style freemind-node-styles) (when ... ...)) (save-match-data (let* ... ... ...)))
(with-current-buffer org-buffer (dolist (node-style freemind-node-styles) (when ... ...)) (save-match-data (let* ... ... ...)))
freemind-write-mm-buffer(#<buffer "Testnote22.mm.org"> #<buffer "Testnote22.mm.org.mm"> nil)
(let ((org-buffer ...) (mm-buffer ...)) (freemind-write-mm-buffer org-buffer mm-buffer nil) (with-current-buffer mm-buffer (basic-save-buffer) (when ... ... ...)))
(if (freemind-check-overwrite mm-file (called-interactively-p)) (let (... ...) (freemind-write-mm-buffer org-buffer mm-buffer nil) (with-current-buffer mm-buffer ... ...)))
(when (freemind-check-overwrite mm-file (called-interactively-p)) (let (... ...) (freemind-write-mm-buffer org-buffer mm-buffer nil) (with-current-buffer mm-buffer ... ...)))
(lambda (org-file mm-file) "Convert the `org-mode' file ORG-FILE to the FreeMind file MM-FILE." (interactive (let* ... ...)) (when (freemind-check-overwrite mm-file ...) (let ... ... ...)))("/home/user/Testnote22.mm.org" "~/Testnote22.mm.org.mm")
call-interactively(freemind-from-org-mode)
command-execute(freemind-from-org-mode t)
execute-extended-command(nil)
call-interactively(execute-extended-command)
Thanks
Andreas Gösele
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-11-24 15:30 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-11-13 0:00 Howto install from git under XEmacs Andreas Goesele
2009-11-13 13:01 ` Carsten Dominik
2009-11-13 23:36 ` Howto install from git under XEmacs (org-freemind problem) Andreas Gösele
2009-11-15 11:17 ` Carsten Dominik
2009-11-15 11:41 ` Lennart Borgman
2009-11-24 15:30 ` Andreas Goesele
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).