* org-table and formulas @ 2010-01-11 19:32 Alan Boudreault 2010-01-13 10:23 ` Sébastien Vauban 0 siblings, 1 reply; 6+ messages in thread From: Alan Boudreault @ 2010-01-11 19:32 UTC (permalink / raw) To: emacs-orgmode Hi, Here's what I'm trying to do (without success) in my spreadsheet: I have a first table : #+TBLNAME: table1 | ... |... |.... |...|... and a second table: #+TBLNAME: table2 | line_reference | ... |... |.... |...|... The line_reference is the line number to get some information in the table1. So in a cell of the table2, I tried a formula like: remote(table1,@$1$3) ($1 = the line_reference) which of course, didn't work. then I tried to use elisp: remote(table1,'(concat "@" $1 "$3")') .... but no success anyway. after all, I decided to merge my 2 tables because it looks like I can use elisp inside a org function (remote). The last tried formula was: '(concat "@" $1 "$3")' ,($1 = the line_reference). The problem of this formula is only that I got the string "@2$3" inside the cell and it's not evaluated as a formula. Could anyone give me some hint to get done what I'm trying to do? regards, Alan -- Alan Boudreault Mapgears http://www.mapgears.com/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: org-table and formulas 2010-01-11 19:32 org-table and formulas Alan Boudreault @ 2010-01-13 10:23 ` Sébastien Vauban 2010-01-13 11:14 ` Alan Boudreault 0 siblings, 1 reply; 6+ messages in thread From: Sébastien Vauban @ 2010-01-13 10:23 UTC (permalink / raw) To: emacs-orgmode-mXXj517/zsQ Hi Alan, Alan Boudreault wrote: > > Here's what I'm trying to do (without success) in my spreadsheet: > > I have a first table : > > #+TBLNAME: table1 > | ... |... |.... |...|... > > and a second table: > > #+TBLNAME: table2 > | line_reference | ... |... |.... |...|... > > The line_reference is the line number to get some information in the table1. > So in a cell of the table2, I tried a formula like: remote(table1,@$1$3) ($1 > = the line_reference) which of course, didn't work. > > then I tried to use elisp: remote(table1,'(concat "@" $1 "$3")') .... but no > success anyway. > > after all, I decided to merge my 2 tables because it looks like I can use > elisp inside a org function (remote). The last tried formula was: '(concat > "@" $1 "$3")' ,($1 = the line_reference). The problem of this formula is > only that I got the string "@2$3" inside the cell and it's not evaluated as > a formula. > > Could anyone give me some hint to get done what I'm trying to do? What I do, which works: - give a name to the cell in table1 - reference it (in table2) by its name #+TBLNAME: Eau | | Date | Relevé m3 | Consommation | Prix TVAC | |---+------------------+-----------+--------------+-----------| | | [2009-11-15 Sun] | 2072.6263 | 0.0000 | 0.00 | | | [2009-11-22 Sun] | 2074.1774 | 1.5511 | 1.55 | | | [2009-11-29 Sun] | 2076.0834 | 1.9060 | 1.91 | | | [2009-12-06 Sun] | 2077.6757 | 1.5923 | 1.59 | | | [2009-12-13 Sun] | 2079.2140 | 1.5383 | 1.54 | | | [2009-12-20 Sun] | 2081.4222 | 2.2082 | 2.21 | | | [2009-12-27 Sun] | 2083.2146 | 1.7924 | 1.79 | | | [2010-01-03 Sun] | 2085.4916 | 2.2770 | 2.28 | | | [2010-01-10 Sun] | 2087.4283 | 1.9367 | 1.94 | | ^ | | | | Eau | #+TBLFM: $4=@+0$-1-@-1$-1;%.4f::$5=$4*1;%.2f::@2$4=0;%.4f | Énergie | Prix TVAC | |-------------+-----------| | Eau | 1.94 | | Gaz | 156.81 | | Électricité | 11.64 | |-------------+-----------| | Total | 170.39 | #+TBLFM: @2$2=remote(Eau,$Eau)::@3$2=remote(Gaz,$Gaz)::@4$2=remote(Elec,$Elec)::@5$2=vsum(@-I..@-II);%.2f Best regards, Seb -- Sébastien Vauban _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode-mXXj517/zsQ@public.gmane.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: org-table and formulas 2010-01-13 10:23 ` Sébastien Vauban @ 2010-01-13 11:14 ` Alan Boudreault 2010-01-13 11:56 ` Stephan Schmitt 2010-01-13 11:59 ` Carsten Dominik 0 siblings, 2 replies; 6+ messages in thread From: Alan Boudreault @ 2010-01-13 11:14 UTC (permalink / raw) To: Sébastien Vauban; +Cc: emacs-orgmode Hi Sébastien and thank you for your answer. The problem with that technique is that I'll have to name ALL the cell for ALL the colomn. Here's an example of my table: #+TBLNAME: FOOD | Name | Brand | Amounts (g) | Calories | Protein | Carbohydrate | Fat | |-----------------+---------------+-------------+----------+---------+--------------+------| | Poitrine Poulet | KirkLand | 100 | 100 | 24 | 0 | 1 | | Capeli d'angelo | Primo | 85 | 300 | 10 | 63 | 1 | | Couscous | Clic | 62 | 220 | 8 | 46 | 1 | | Fromage Cottage | Sealtest | 125 | 100 | 15 | 8 | 1 | | Ficello | Black Diamond | 21 | 60 | 6 | 0 | 4 | | Concombre cru | | 100 | 15 | 0.65 | 3.63 | 0.11 | | Clementine cru | | 100 | 47 | 0.85 | 12.02 | 0.15 | In the table 2, I would like to be able to just set a column to ie. 2 (for "Poitrine Poulet"), then I'll be able to get all the info of the different columns I need to do my calculs. I see there is also a "_" option for row name, but I'm unsure on how to specify the column desired with that name and how to get it evaluated if I need to concat something... regards, Alan Sébastien Vauban wrote: > Hi Alan, > > Alan Boudreault wrote: > >> Here's what I'm trying to do (without success) in my spreadsheet: >> >> I have a first table : >> >> #+TBLNAME: table1 >> | ... |... |.... |...|... >> >> and a second table: >> >> #+TBLNAME: table2 >> | line_reference | ... |... |.... |...|... >> >> The line_reference is the line number to get some information in the table1. >> So in a cell of the table2, I tried a formula like: remote(table1,@$1$3) ($1 >> = the line_reference) which of course, didn't work. >> >> then I tried to use elisp: remote(table1,'(concat "@" $1 "$3")') .... but no >> success anyway. >> >> after all, I decided to merge my 2 tables because it looks like I can use >> elisp inside a org function (remote). The last tried formula was: '(concat >> "@" $1 "$3")' ,($1 = the line_reference). The problem of this formula is >> only that I got the string "@2$3" inside the cell and it's not evaluated as >> a formula. >> >> Could anyone give me some hint to get done what I'm trying to do? >> > > What I do, which works: > > - give a name to the cell in table1 > - reference it (in table2) by its name > > > #+TBLNAME: Eau > | | Date | Relevé m3 | Consommation | Prix TVAC | > |---+------------------+-----------+--------------+-----------| > | | [2009-11-15 Sun] | 2072.6263 | 0.0000 | 0.00 | > | | [2009-11-22 Sun] | 2074.1774 | 1.5511 | 1.55 | > | | [2009-11-29 Sun] | 2076.0834 | 1.9060 | 1.91 | > | | [2009-12-06 Sun] | 2077.6757 | 1.5923 | 1.59 | > | | [2009-12-13 Sun] | 2079.2140 | 1.5383 | 1.54 | > | | [2009-12-20 Sun] | 2081.4222 | 2.2082 | 2.21 | > | | [2009-12-27 Sun] | 2083.2146 | 1.7924 | 1.79 | > | | [2010-01-03 Sun] | 2085.4916 | 2.2770 | 2.28 | > | | [2010-01-10 Sun] | 2087.4283 | 1.9367 | 1.94 | > | ^ | | | | Eau | > #+TBLFM: $4=@+0$-1-@-1$-1;%.4f::$5=$4*1;%.2f::@2$4=0;%.4f > > > | Énergie | Prix TVAC | > |-------------+-----------| > | Eau | 1.94 | > | Gaz | 156.81 | > | Électricité | 11.64 | > |-------------+-----------| > | Total | 170.39 | > #+TBLFM: @2$2=remote(Eau,$Eau)::@3$2=remote(Gaz,$Gaz)::@4$2=remote(Elec,$Elec)::@5$2=vsum(@-I..@-II);%.2f > > Best regards, > Seb > > -- Alan Boudreault Mapgears http://www.mapgears.com/ ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: org-table and formulas 2010-01-13 11:14 ` Alan Boudreault @ 2010-01-13 11:56 ` Stephan Schmitt 2010-01-13 11:59 ` Carsten Dominik 1 sibling, 0 replies; 6+ messages in thread From: Stephan Schmitt @ 2010-01-13 11:56 UTC (permalink / raw) To: Alan Boudreault; +Cc: Org Mode Mailing List [-- Attachment #1: Type: text/plain, Size: 4461 bytes --] Hi Alan, seems what you're looking for is some relational database functionality, which is not possible with org spreadsheets :-( Find a possible solution for your problem in the attached org file. You will need org-babel to execute the source blocks. hth, Stephan Also sprach Alan Boudreault: > Hi Sébastien and thank you for your answer. > > The problem with that technique is that I'll have to name ALL the cell > for ALL the colomn. Here's an example of my table: > > #+TBLNAME: FOOD > | Name | Brand | Amounts (g) | Calories | Protein | > Carbohydrate | Fat | > > |-----------------+---------------+-------------+----------+---------+--------------+------| > > | Poitrine Poulet | KirkLand | 100 | 100 | > 24 | 0 | 1 | > | Capeli d'angelo | Primo | 85 | 300 | 10 > | 63 | 1 | > | Couscous | Clic | 62 | 220 > | 8 | 46 | 1 | > | Fromage Cottage | Sealtest | 125 | 100 | 15 > | 8 | 1 | > | Ficello | Black Diamond | 21 | 60 > | 6 | 0 | 4 | > | Concombre cru | | 100 | 15 | 0.65 > | 3.63 | 0.11 | > | Clementine cru | | 100 | 47 | 0.85 > | 12.02 | 0.15 | > > In the table 2, I would like to be able to just set a column to ie. 2 > (for "Poitrine Poulet"), then I'll be able to get all the info of the > different columns I need to do my calculs. I see there is also a "_" > option for row name, but I'm unsure on how to specify the column desired > with that name and how to get it evaluated if I need to concat something... > > regards, > Alan > > Sébastien Vauban wrote: >> Hi Alan, >> >> Alan Boudreault wrote: >> >>> Here's what I'm trying to do (without success) in my spreadsheet: >>> >>> I have a first table : >>> >>> #+TBLNAME: table1 >>> | ... |... |.... |...|... >>> >>> and a second table: >>> >>> #+TBLNAME: table2 >>> | line_reference | ... |... |.... |...|... >>> >>> The line_reference is the line number to get some information in the >>> table1. >>> So in a cell of the table2, I tried a formula like: >>> remote(table1,@$1$3) ($1 >>> = the line_reference) which of course, didn't work. >>> >>> then I tried to use elisp: remote(table1,'(concat "@" $1 "$3")') .... >>> but no >>> success anyway. >>> >>> after all, I decided to merge my 2 tables because it looks like I can >>> use >>> elisp inside a org function (remote). The last tried formula was: >>> '(concat >>> "@" $1 "$3")' ,($1 = the line_reference). The problem of this formula is >>> only that I got the string "@2$3" inside the cell and it's not >>> evaluated as >>> a formula. >>> >>> Could anyone give me some hint to get done what I'm trying to do? >>> >> >> What I do, which works: >> >> - give a name to the cell in table1 >> - reference it (in table2) by its name >> >> >> #+TBLNAME: Eau >> | | Date | Relevé m3 | Consommation | Prix TVAC | >> |---+------------------+-----------+--------------+-----------| >> | | [2009-11-15 Sun] | 2072.6263 | 0.0000 | 0.00 | >> | | [2009-11-22 Sun] | 2074.1774 | 1.5511 | 1.55 | >> | | [2009-11-29 Sun] | 2076.0834 | 1.9060 | 1.91 | >> | | [2009-12-06 Sun] | 2077.6757 | 1.5923 | 1.59 | >> | | [2009-12-13 Sun] | 2079.2140 | 1.5383 | 1.54 | >> | | [2009-12-20 Sun] | 2081.4222 | 2.2082 | 2.21 | >> | | [2009-12-27 Sun] | 2083.2146 | 1.7924 | 1.79 | >> | | [2010-01-03 Sun] | 2085.4916 | 2.2770 | 2.28 | >> | | [2010-01-10 Sun] | 2087.4283 | 1.9367 | 1.94 | >> | ^ | | | | Eau | >> #+TBLFM: $4=@+0$-1-@-1$-1;%.4f::$5=$4*1;%.2f::@2$4=0;%.4f >> >> >> | Énergie | Prix TVAC | >> |-------------+-----------| >> | Eau | 1.94 | >> | Gaz | 156.81 | >> | Électricité | 11.64 | >> |-------------+-----------| >> | Total | 170.39 | >> #+TBLFM: >> @2$2=remote(Eau,$Eau)::@3$2=remote(Gaz,$Gaz)::@4$2=remote(Elec,$Elec)::@5$2=vsum(@-I..@-II);%.2f >> >> >> Best regards, >> Seb >> >> > > [-- Attachment #2: select-from-where.org --] [-- Type: text/org, Size: 2943 bytes --] * select from where To execute the source blocks load org-babel and hit "C-c C-C" with point inside the block. The following function implements a simple SELECT-FROM-WHERE clause for remote org-tables: #+srcname: my-select-from-where #+begin_src emacs-lisp :tangle no :results silent (require 'org-babel-ref) (defun my-select-from-where (select-column table-name where-column where-entry) "Get an entry of a remote table with #+TBLNAME: `table-name' using a simple where clause: SELECT select-column FROM table-name WHERE where-column = where-entry `select-column' and `where-column' are zero-based indices (first column has index 0). The test is done using `equal'. Example: For the following tabe ,#+TBLNAME: mytable | 0815 | foo | | 4711 | bar | the function call (my-select-from-where 1 \"mytable\" 0 4711) returns \"bar\"." (let ((table (org-babel-ref-resolve-reference table-name nil)) select-entry) (dolist (row table) (if (equal (nth where-column row) where-entry) (if (null select-entry) (setq select-entry (nth select-column row)) (error "where-entry is not unique")))) select-entry)) #+end_src This requires the column which is used for indexing to have unique entries. Let's take this table for testing: #+TBLNAME: mytable1 | 0815 | foo | | 4711 | bar | First select the second column of the row where the first column equals 0815, then select the first column of the row where the second column equals "foo": #+srcname: test-select #+begin_src emacs-lisp :tangle no (list (my-select-from-where 1 "mytable1" 0 0815) (my-select-from-where 0 "mytable1" 1 "foo")) #+end_src Unfortunately, a table name ("mytable1") is replaced by something obscure, when we use it in the #+TBLFM line. Also, the function my-select-from-where converts numeric table entries to a numeric type, in contrast to the referencing in the #+TBLFM line. These helper functions work around these problems: #+srcname: my-select-from-where-helpers #+begin_src emacs-lisp :tangle no :results silent (defun my-select-1-from-table-where-0= (where-entry) (my-select-from-where 1 "mytable1" 0 (if (numberp where-entry) where-entry (string-to-number where-entry)))) (defun my-select-0-from-table-where-1= (where-entry) (my-select-from-where 0 "mytable1" 1 where-entry)) #+end_src Testing the helpers: #+srcname: test-helpers #+begin_src emacs-lisp :tangle no (list (my-select-1-from-table-where-0= 4711) (my-select-0-from-table-where-1= "bar")) #+end_src Now we can reference remote table rows using a dynamic index (press "C-c C-c" in the #+TBLFM line): #+TBLNAME: mytable2 | 4711 | | | | 0815 | | | #+TBLFM: $2='(my-select-1-from-table-where-0= $1)::$3='(my-select-0-from-table-where-1= $2) [-- Attachment #3: Type: text/plain, Size: 201 bytes --] _______________________________________________ Emacs-orgmode mailing list Please use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: org-table and formulas 2010-01-13 11:14 ` Alan Boudreault 2010-01-13 11:56 ` Stephan Schmitt @ 2010-01-13 11:59 ` Carsten Dominik 2010-01-13 12:23 ` Alan Boudreault 1 sibling, 1 reply; 6+ messages in thread From: Carsten Dominik @ 2010-01-13 11:59 UTC (permalink / raw) To: Alan Boudreault; +Cc: Sébastien Vauban, emacs-orgmode Hi Alan, I think what you would have to do is to build a lisp function that creates the full reference by string manipulation, and then calls org- table-get-remote-range directly to retrieve the result. That function returns a string or a list of strings, so conversion might be needed depending on how you use the result. - Carsten On Jan 13, 2010, at 12:14 PM, Alan Boudreault wrote: > Hi Sébastien and thank you for your answer. > > The problem with that technique is that I'll have to name ALL the > cell for ALL the colomn. Here's an example of my table: > > #+TBLNAME: FOOD > | Name | Brand | Amounts (g) | Calories | Protein > | Carbohydrate | Fat | > |-----------------+---------------+-------------+----------+--------- > +--------------+------| > | Poitrine Poulet | KirkLand | 100 | 100 > | 24 | 0 | 1 | > | Capeli d'angelo | Primo | 85 | 300 | > 10 | 63 | 1 | > | Couscous | Clic | 62 | 220 > | 8 | 46 | 1 | > | Fromage Cottage | Sealtest | 125 | 100 | 15 > | 8 | 1 | > | Ficello | Black Diamond | 21 | 60 > | 6 | 0 | 4 | > | Concombre cru | | 100 | 15 | > 0.65 | 3.63 | 0.11 | > | Clementine cru | | 100 | 47 | > 0.85 | 12.02 | 0.15 | > > In the table 2, I would like to be able to just set a column to ie. > 2 (for "Poitrine Poulet"), then I'll be able to get all the info of > the different columns I need to do my calculs. I see there is also a > "_" option for row name, but I'm unsure on how to specify the column > desired with that name and how to get it evaluated if I need to > concat something... > > regards, > Alan > > Sébastien Vauban wrote: >> Hi Alan, >> >> Alan Boudreault wrote: >> >>> Here's what I'm trying to do (without success) in my spreadsheet: >>> >>> I have a first table : >>> >>> #+TBLNAME: table1 >>> | ... |... |.... |...|... >>> >>> and a second table: >>> >>> #+TBLNAME: table2 >>> | line_reference | ... |... |.... |...|... >>> >>> The line_reference is the line number to get some information in >>> the table1. >>> So in a cell of the table2, I tried a formula like: remote(table1,@ >>> $1$3) ($1 >>> = the line_reference) which of course, didn't work. >>> >>> then I tried to use elisp: remote(table1,'(concat "@" $1 >>> "$3")') .... but no >>> success anyway. >>> >>> after all, I decided to merge my 2 tables because it looks like I >>> can use >>> elisp inside a org function (remote). The last tried formula was: >>> '(concat >>> "@" $1 "$3")' ,($1 = the line_reference). The problem of this >>> formula is >>> only that I got the string "@2$3" inside the cell and it's not >>> evaluated as >>> a formula. >>> >>> Could anyone give me some hint to get done what I'm trying to do? >>> >> >> What I do, which works: >> >> - give a name to the cell in table1 >> - reference it (in table2) by its name >> >> >> #+TBLNAME: Eau >> | | Date | Relevé m3 | Consommation | Prix TVAC | >> |---+------------------+-----------+--------------+-----------| >> | | [2009-11-15 Sun] | 2072.6263 | 0.0000 | 0.00 | >> | | [2009-11-22 Sun] | 2074.1774 | 1.5511 | 1.55 | >> | | [2009-11-29 Sun] | 2076.0834 | 1.9060 | 1.91 | >> | | [2009-12-06 Sun] | 2077.6757 | 1.5923 | 1.59 | >> | | [2009-12-13 Sun] | 2079.2140 | 1.5383 | 1.54 | >> | | [2009-12-20 Sun] | 2081.4222 | 2.2082 | 2.21 | >> | | [2009-12-27 Sun] | 2083.2146 | 1.7924 | 1.79 | >> | | [2010-01-03 Sun] | 2085.4916 | 2.2770 | 2.28 | >> | | [2010-01-10 Sun] | 2087.4283 | 1.9367 | 1.94 | >> | ^ | | | | Eau | >> #+TBLFM: $4=@+0$-1-@-1$-1;%.4f::$5=$4*1;%.2f::@2$4=0;%.4f >> >> >> | Énergie | Prix TVAC | >> |-------------+-----------| >> | Eau | 1.94 | >> | Gaz | 156.81 | >> | Électricité | 11.64 | >> |-------------+-----------| >> | Total | 170.39 | >> #+TBLFM: @2$2=remote(Eau,$Eau)::@3$2=remote(Gaz, >> $Gaz)::@4$2=remote(Elec,$Elec)::@5$2=vsum(@-I..@-II);%.2f >> >> Best regards, >> Seb >> >> > > > -- > Alan Boudreault > Mapgears > http://www.mapgears.com/ > > > _______________________________________________ > Emacs-orgmode mailing list > Please use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode - Carsten ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: org-table and formulas 2010-01-13 11:59 ` Carsten Dominik @ 2010-01-13 12:23 ` Alan Boudreault 0 siblings, 0 replies; 6+ messages in thread From: Alan Boudreault @ 2010-01-13 12:23 UTC (permalink / raw) To: Carsten Dominik; +Cc: Sébastien Vauban, emacs-orgmode Thanks for your help Carsten, Stephan and Sébastien. I'm going to take a look at your suggestions and see what I can do. Alan On January 13, 2010 06:59:54 am Carsten Dominik wrote: > Hi Alan, > > I think what you would have to do is to build a lisp function that > creates the full reference by string manipulation, and then calls org- > table-get-remote-range directly to retrieve the result. > > That function returns a string or a list of strings, so conversion > might be needed depending on how you use the result. > > - Carsten > > On Jan 13, 2010, at 12:14 PM, Alan Boudreault wrote: > > Hi Sébastien and thank you for your answer. > > > > The problem with that technique is that I'll have to name ALL the > > cell for ALL the colomn. Here's an example of my table: > > > > #+TBLNAME: FOOD > > > > | Name | Brand | Amounts (g) | Calories | Protein > > | Carbohydrate | Fat | > > |-----------------+---------------+-------------+----------+--------- > > > > +--------------+------| > > > > | Poitrine Poulet | KirkLand | 100 | 100 > > | 24 | 0 | 1 | > > | Capeli d'angelo | Primo | 85 | 300 | > > > > 10 | 63 | 1 | > > > > | Couscous | Clic | 62 | 220 > > | 8 | 46 | 1 | > > | Fromage Cottage | Sealtest | 125 | 100 | 15 > > | 8 | 1 | > > | Ficello | Black Diamond | 21 | 60 > > | 6 | 0 | 4 | > > | Concombre cru | | 100 | 15 | > > > > 0.65 | 3.63 | 0.11 | > > > > | Clementine cru | | 100 | 47 | > > > > 0.85 | 12.02 | 0.15 | > > > > In the table 2, I would like to be able to just set a column to ie. > > 2 (for "Poitrine Poulet"), then I'll be able to get all the info of > > the different columns I need to do my calculs. I see there is also a > > "_" option for row name, but I'm unsure on how to specify the column > > desired with that name and how to get it evaluated if I need to > > concat something... > > > > regards, > > Alan > > > > Sébastien Vauban wrote: > >> Hi Alan, > >> > >> Alan Boudreault wrote: > >>> Here's what I'm trying to do (without success) in my spreadsheet: > >>> > >>> I have a first table : > >>> > >>> #+TBLNAME: table1 > >>> > >>> | ... |... |.... |...|... > >>> > >>> and a second table: > >>> > >>> #+TBLNAME: table2 > >>> > >>> | line_reference | ... |... |.... |...|... > >>> > >>> The line_reference is the line number to get some information in > >>> the table1. > >>> So in a cell of the table2, I tried a formula like: remote(table1,@ > >>> $1$3) ($1 > >>> = the line_reference) which of course, didn't work. > >>> > >>> then I tried to use elisp: remote(table1,'(concat "@" $1 > >>> "$3")') .... but no > >>> success anyway. > >>> > >>> after all, I decided to merge my 2 tables because it looks like I > >>> can use > >>> elisp inside a org function (remote). The last tried formula was: > >>> '(concat > >>> "@" $1 "$3")' ,($1 = the line_reference). The problem of this > >>> formula is > >>> only that I got the string "@2$3" inside the cell and it's not > >>> evaluated as > >>> a formula. > >>> > >>> Could anyone give me some hint to get done what I'm trying to do? > >> > >> What I do, which works: > >> > >> - give a name to the cell in table1 > >> - reference it (in table2) by its name > >> > >> > >> #+TBLNAME: Eau > >> > >> | | Date | Relevé m3 | Consommation | Prix TVAC | > >> | > >> |---+------------------+-----------+--------------+-----------| > >> | > >> | | [2009-11-15 Sun] | 2072.6263 | 0.0000 | 0.00 | > >> | | [2009-11-22 Sun] | 2074.1774 | 1.5511 | 1.55 | > >> | | [2009-11-29 Sun] | 2076.0834 | 1.9060 | 1.91 | > >> | | [2009-12-06 Sun] | 2077.6757 | 1.5923 | 1.59 | > >> | | [2009-12-13 Sun] | 2079.2140 | 1.5383 | 1.54 | > >> | | [2009-12-20 Sun] | 2081.4222 | 2.2082 | 2.21 | > >> | | [2009-12-27 Sun] | 2083.2146 | 1.7924 | 1.79 | > >> | | [2010-01-03 Sun] | 2085.4916 | 2.2770 | 2.28 | > >> | | [2010-01-10 Sun] | 2087.4283 | 1.9367 | 1.94 | > >> | > >> | ^ | | | | Eau | > >> > >> #+TBLFM: $4=@+0$-1-@-1$-1;%.4f::$5=$4*1;%.2f::@2$4=0;%.4f > >> > >> | Énergie | Prix TVAC | > >> |-------------+-----------| > >> | Eau | 1.94 | > >> | Gaz | 156.81 | > >> | Électricité | 11.64 | > >> |-------------+-----------| > >> | Total | 170.39 | > >> > >> #+TBLFM: @2$2=remote(Eau,$Eau)::@3$2=remote(Gaz, > >> $Gaz)::@4$2=remote(Elec,$Elec)::@5$2=vsum(@-I..@-II);%.2f > >> > >> Best regards, > >> Seb > > > > _______________________________________________ > > Emacs-orgmode mailing list > > Please use `Reply All' to send replies to the list. > > Emacs-orgmode@gnu.org > > http://lists.gnu.org/mailman/listinfo/emacs-orgmode > > - Carsten > -- Alan Boudreault Mapgears http://www.mapgears.com ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-01-13 12:23 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-01-11 19:32 org-table and formulas Alan Boudreault 2010-01-13 10:23 ` Sébastien Vauban 2010-01-13 11:14 ` Alan Boudreault 2010-01-13 11:56 ` Stephan Schmitt 2010-01-13 11:59 ` Carsten Dominik 2010-01-13 12:23 ` Alan Boudreault
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).