* porting guide from old to new beamer export?
@ 2015-08-30 23:02 Marko Schütz Schmuck
2015-08-31 0:03 ` Suvayu Ali
0 siblings, 1 reply; 13+ messages in thread
From: Marko Schütz Schmuck @ 2015-08-30 23:02 UTC (permalink / raw)
To: Orgmode Mailing List
[-- Attachment #1: Type: text/plain, Size: 592 bytes --]
Dear All,
I have again tried (unsuccessfully in the time I was able to spend on
this) to switch to a newer version of org (tried ELPA as well as
8.2.4). The obstacle is always the beamer export. I have consulted the
documentation online, but by following the instructions there the
generated LaTeX does not use the frame environment at all. I did set
H:1, but no frames...
I would imagine I am not the only person struggling with this.
If someone knowledgeable about the two beamer exports could maybe put
together a "porting guide" that would really be great...
Thanks in advance,
Marko
[-- Attachment #2: OpenPGP Digital Signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-30 23:02 porting guide from old to new beamer export? Marko Schütz Schmuck
@ 2015-08-31 0:03 ` Suvayu Ali
2015-08-31 8:11 ` Joseph Vidal-Rosset
2015-08-31 17:23 ` Marko Schütz-Schmuck
0 siblings, 2 replies; 13+ messages in thread
From: Suvayu Ali @ 2015-08-31 0:03 UTC (permalink / raw)
To: emacs-orgmode
On Sun, Aug 30, 2015 at 07:02:51PM -0400, Marko Schütz Schmuck wrote:
> Dear All,
>
> I have again tried (unsuccessfully in the time I was able to spend on
> this) to switch to a newer version of org (tried ELPA as well as
> 8.2.4). The obstacle is always the beamer export. I have consulted the
> documentation online, but by following the instructions there the
> generated LaTeX does not use the frame environment at all. I did set
> H:1, but no frames...
Which documentation did you look at? The manual is very complete, and
if you want something more along the lines of a tutorial, see the
articles listed on this page:
http://orgmode.org/worg/exporters/beamer/index.html
If you have specific questions, please feel free to ask.
Hope this helps,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-31 0:03 ` Suvayu Ali
@ 2015-08-31 8:11 ` Joseph Vidal-Rosset
2015-08-31 8:32 ` Loris Bennett
2015-08-31 17:23 ` Marko Schütz-Schmuck
1 sibling, 1 reply; 13+ messages in thread
From: Joseph Vidal-Rosset @ 2015-08-31 8:11 UTC (permalink / raw)
To: Liste-emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 1135 bytes --]
Is it possible to get something like the CambridgeUS colortheme via the
org-export of beamer? I do not succeed to do it, it is always the same
theme.
Best wishes
Jo.
2015-08-31 2:03 GMT+02:00 Suvayu Ali <fatkasuvayu+linux@gmail.com>:
> On Sun, Aug 30, 2015 at 07:02:51PM -0400, Marko Schütz Schmuck wrote:
> > Dear All,
> >
> > I have again tried (unsuccessfully in the time I was able to spend on
> > this) to switch to a newer version of org (tried ELPA as well as
> > 8.2.4). The obstacle is always the beamer export. I have consulted the
> > documentation online, but by following the instructions there the
> > generated LaTeX does not use the frame environment at all. I did set
> > H:1, but no frames...
>
> Which documentation did you look at? The manual is very complete, and
> if you want something more along the lines of a tutorial, see the
> articles listed on this page:
>
> http://orgmode.org/worg/exporters/beamer/index.html
>
> If you have specific questions, please feel free to ask.
>
> Hope this helps,
>
> --
> Suvayu
>
> Open source is the future. It sets us free.
>
>
[-- Attachment #2: Type: text/html, Size: 1725 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-31 8:11 ` Joseph Vidal-Rosset
@ 2015-08-31 8:32 ` Loris Bennett
2015-08-31 9:46 ` Suvayu Ali
2015-09-01 19:11 ` Joseph Vidal-Rosset
0 siblings, 2 replies; 13+ messages in thread
From: Loris Bennett @ 2015-08-31 8:32 UTC (permalink / raw)
To: emacs-orgmode
Joseph Vidal-Rosset <joseph.vidal.rosset@gmail.com> writes:
> Is it possible to get something like the CambridgeUS colortheme via
> the org-export of beamer? I do not succeed to do it, it is always the
> same theme.
>
> Best wishes
>
> Jo.
#+BEAMER_THEME: CambridgeUS
If that doesn't work, you should post a minimal working example which
illustrates the problem.
Cheers,
Loris
--
This signature is currently under construction.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-31 8:32 ` Loris Bennett
@ 2015-08-31 9:46 ` Suvayu Ali
2015-09-01 19:11 ` Joseph Vidal-Rosset
1 sibling, 0 replies; 13+ messages in thread
From: Suvayu Ali @ 2015-08-31 9:46 UTC (permalink / raw)
To: emacs-orgmode
On Mon, Aug 31, 2015 at 10:32:35AM +0200, Loris Bennett wrote:
> Joseph Vidal-Rosset <joseph.vidal.rosset@gmail.com> writes:
>
> > Is it possible to get something like the CambridgeUS colortheme via
> > the org-export of beamer? I do not succeed to do it, it is always the
> > same theme.
> >
> > Best wishes
> >
> > Jo.
>
> #+BEAMER_THEME: CambridgeUS
>
> If that doesn't work, you should post a minimal working example which
> illustrates the problem.
Most of the standard stuff is quite extensively documented. E.g. see
these:
- Manual: (info "(org) Beamer specific export settings")
http://orgmode.org/manual/Beamer-specific-export-settings.html#Beamer-specific-export-settings
- Worg: http://orgmode.org/worg/exporters/beamer/ox-beamer.html#config
Cheers,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-31 8:32 ` Loris Bennett
2015-08-31 9:46 ` Suvayu Ali
@ 2015-09-01 19:11 ` Joseph Vidal-Rosset
2015-09-02 9:05 ` Suvayu Ali
2015-09-02 11:13 ` Eric S Fraga
1 sibling, 2 replies; 13+ messages in thread
From: Joseph Vidal-Rosset @ 2015-09-01 19:11 UTC (permalink / raw)
To: Loris Bennett; +Cc: Liste-emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 829 bytes --]
2015-08-31 10:32 GMT+02:00 Loris Bennett <loris.bennett@fu-berlin.de>:
> #+BEAMER_THEME: CambridgeUS
>
> If that doesn't work, you should post a minimal working example which
> illustrates the problem.
>
I must say to the list that the code that solves my problem is given in
Eric Fraga's tutorial:
#+latex_header:
\mode<beamer>{\usetheme{CambridgeUS}\usepackage{beamer_udl_theme}}
where the last \usepackage refers to a personal customization of
CambridgeUS theme.
Now I meet a new problem : what is the org-mode code to export this Latex
code that customizes the frame of the title page? :
\begin{frame}
\titlepage
\begin{center}
\includegraphics[height=1cm,width=1cm]{cnrs_noir}~~
\includegraphics[height=1cm,width=1cm]{logo}~
\includegraphics[height=1cm,width=1cm]{logo-udl}
\end{center}
\end{frame}
Best wishes
Jo.
[-- Attachment #2: Type: text/html, Size: 1479 bytes --]
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: porting guide from old to new beamer export?
2015-09-01 19:11 ` Joseph Vidal-Rosset
@ 2015-09-02 9:05 ` Suvayu Ali
2015-09-02 11:13 ` Eric S Fraga
1 sibling, 0 replies; 13+ messages in thread
From: Suvayu Ali @ 2015-09-02 9:05 UTC (permalink / raw)
To: emacs-orgmode
On Tue, Sep 01, 2015 at 09:11:36PM +0200, Joseph Vidal-Rosset wrote:
> 2015-08-31 10:32 GMT+02:00 Loris Bennett <loris.bennett@fu-berlin.de>:
>
> > #+BEAMER_THEME: CambridgeUS
> >
> > If that doesn't work, you should post a minimal working example which
> > illustrates the problem.
> >
>
>
> I must say to the list that the code that solves my problem is given in
> Eric Fraga's tutorial:
>
> #+latex_header:
> \mode<beamer>{\usetheme{CambridgeUS}\usepackage{beamer_udl_theme}}
If using the BEAMER_THEME keyword option does not work for you, please
submit a bug report with a minimal working example demonstrating the
bug.
Thanks,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: porting guide from old to new beamer export?
2015-09-01 19:11 ` Joseph Vidal-Rosset
2015-09-02 9:05 ` Suvayu Ali
@ 2015-09-02 11:13 ` Eric S Fraga
1 sibling, 0 replies; 13+ messages in thread
From: Eric S Fraga @ 2015-09-02 11:13 UTC (permalink / raw)
To: Joseph Vidal-Rosset; +Cc: Liste-emacs-orgmode@gnu.org
On Tuesday, 1 Sep 2015 at 21:11, Joseph Vidal-Rosset wrote:
> 2015-08-31 10:32 GMT+02:00 Loris Bennett <loris.bennett@fu-berlin.de>:
>
>> #+BEAMER_THEME: CambridgeUS
>>
>> If that doesn't work, you should post a minimal working example which
>> illustrates the problem.
>>
>
>
> I must say to the list that the code that solves my problem is given in
> Eric Fraga's tutorial:
>
> #+latex_header:
> \mode<beamer>{\usetheme{CambridgeUS}\usepackage{beamer_udl_theme}}
I'm glad my tutorial helped but I am surprised you needed to do
this. Can you please post a minimal example that fails when using the
"#+beamer_theme:" construct as suggested by Loris above? This
definitely works for me.
Also, what version of org? (M-x org-version RET)
> Now I meet a new problem : what is the org-mode code to export this Latex
> code that customizes the frame of the title page? :
>
> \begin{frame}
> \titlepage
> \begin{center}
> \includegraphics[height=1cm,width=1cm]{cnrs_noir}~~
> \includegraphics[height=1cm,width=1cm]{logo}~
> \includegraphics[height=1cm,width=1cm]{logo-udl}
> \end{center}
> \end{frame}
For customisation of the title page, I tend to use the #+date: header
and put whatever LaTeX I want there. For instance, for a conference I
am presenting at next week, I have done:
#+begin_src org
,#+date: 8 September 2015 @@latex:\\@@ Carbon dioxide utilisation @@latex:\\@@ Faraday Discussions
#+end_src
You could easily put your graphics within a @@latex:...@@ construct in
the DATE header.
HTH,
eric
--
: Eric S Fraga (0xFFFCF67D), Emacs 25.0.50.2, Org release_8.3.1-188-g410ea6
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-31 0:03 ` Suvayu Ali
2015-08-31 8:11 ` Joseph Vidal-Rosset
@ 2015-08-31 17:23 ` Marko Schütz-Schmuck
2015-08-31 20:50 ` Suvayu Ali
1 sibling, 1 reply; 13+ messages in thread
From: Marko Schütz-Schmuck @ 2015-08-31 17:23 UTC (permalink / raw)
To: emacs-orgmode
Suvayu Ali <fatkasuvayu+linux <at> gmail.com> writes:
>
> On Sun, Aug 30, 2015 at 07:02:51PM -0400, Marko Schütz Schmuck wrote:
> > Dear All,
> >
> > I have again tried (unsuccessfully in the time I was able to spend on
> > this) to switch to a newer version of org (tried ELPA as well as
> > 8.2.4). The obstacle is always the beamer export. I have consulted the
> > documentation online, but by following the instructions there the
> > generated LaTeX does not use the frame environment at all. I did set
> > H:1, but no frames...
>
> Which documentation did you look at? The manual is very complete, and
> if you want something more along the lines of a tutorial, see the
> articles listed on this page:
>
> http://orgmode.org/worg/exporters/beamer/index.html
>
> If you have specific questions, please feel free to ask.
Thanks for the link. I had used all of the documentation that are referenced
on that page.
I have uploaded a typical file with slides to http://pastebin.com/L2ss0hXG
and http://pastebin.com/D61eSkDq.
When I publish this to PDF with the new exporter the LaTeX file that is
generated does not use any frames http://pastebin.com/8jN6XeuE
Best regards
Marko
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: porting guide from old to new beamer export?
2015-08-31 17:23 ` Marko Schütz-Schmuck
@ 2015-08-31 20:50 ` Suvayu Ali
2015-09-01 0:19 ` Marko Schütz-Schmuck
0 siblings, 1 reply; 13+ messages in thread
From: Suvayu Ali @ 2015-08-31 20:50 UTC (permalink / raw)
To: emacs-orgmode
On Mon, Aug 31, 2015 at 05:23:52PM +0000, Marko Schütz-Schmuck wrote:
>
> Thanks for the link. I had used all of the documentation that are referenced
> on that page.
>
> I have uploaded a typical file with slides to http://pastebin.com/L2ss0hXG
> and http://pastebin.com/D61eSkDq.
>
> When I publish this to PDF with the new exporter the LaTeX file that is
> generated does not use any frames http://pastebin.com/8jN6XeuE
I think you are doing one of two things wrong. Either your
org-latex-classes is incorrectly setup, or you are simply exporting to
latex instead of beamer (C-c C-e l b). E.g. I get the following as the
first frame:
\begin{frame}[label={sec:orgheadline1}]{linear search}
%% stuff
\end{frame}
My org-latex-classes has an entry like this:
("beamer" "\\documentclass[presentation]{beamer}"
("\\section{%s}" . "\\section*{%s}")
("\\subsection{%s}" . "\\subsection*{%s}")
("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
Does yours?
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: porting guide from old to new beamer export?
2015-08-31 20:50 ` Suvayu Ali
@ 2015-09-01 0:19 ` Marko Schütz-Schmuck
2015-09-01 7:06 ` Suvayu Ali
0 siblings, 1 reply; 13+ messages in thread
From: Marko Schütz-Schmuck @ 2015-09-01 0:19 UTC (permalink / raw)
To: emacs-orgmode
Suvayu Ali <fatkasuvayu+linux <at> gmail.com> writes:
>
> On Mon, Aug 31, 2015 at 05:23:52PM +0000, Marko Schütz-Schmuck wrote:
> >
> > Thanks for the link. I had used all of the documentation that are referenced
> > on that page.
> >
> > I have uploaded a typical file with slides to http://pastebin.com/L2ss0hXG
> > and http://pastebin.com/D61eSkDq.
> >
> > When I publish this to PDF with the new exporter the LaTeX file that is
> > generated does not use any frames http://pastebin.com/8jN6XeuE
>
> I think you are doing one of two things wrong. Either your
> org-latex-classes is incorrectly setup, or you are simply exporting to
> latex instead of beamer (C-c C-e l b). E.g. I get the following as the
> first frame:
Thanks, that helps a lot!
I did not have an option to export to beamer. I wasn't aware that I had to
require ox-beamer explicitly.
Now I notice that the new exporter makes frame titles like this
\begin{frame}[label=sec-8]{proving \hoareTriple{V}\{\(\textmath{merge}\)\}\{P\}}
where the old one generated this
\begin{frame}
\frametitle{proving \hoareTriple{V}{\(\textmath{merge}\)}{P}}
\label{sec-8}
The new exporter escaped some { and } that should not be escaped.
Would you also have a hint to solve that?
Thanks,
Marko
> \begin{frame}[label={sec:orgheadline1}]{linear search}
> %% stuff
> \end{frame}
>
> My org-latex-classes has an entry like this:
>
> ("beamer" "\\documentclass[presentation]{beamer}"
> ("\\section{%s}" . "\\section*{%s}")
> ("\\subsection{%s}" . "\\subsection*{%s}")
> ("\\subsubsection{%s}" . "\\subsubsection*{%s}"))
>
> Does yours?
>
^ permalink raw reply [flat|nested] 13+ messages in thread* Re: porting guide from old to new beamer export?
2015-09-01 0:19 ` Marko Schütz-Schmuck
@ 2015-09-01 7:06 ` Suvayu Ali
2015-09-01 18:15 ` Marko Schütz-Schmuck
0 siblings, 1 reply; 13+ messages in thread
From: Suvayu Ali @ 2015-09-01 7:06 UTC (permalink / raw)
To: emacs-orgmode
On Tue, Sep 01, 2015 at 12:19:32AM +0000, Marko Schütz-Schmuck wrote:
> Suvayu Ali <fatkasuvayu+linux <at> gmail.com> writes:
>
> >
> > On Mon, Aug 31, 2015 at 05:23:52PM +0000, Marko Schütz-Schmuck wrote:
> > >
> > > Thanks for the link. I had used all of the documentation that are referenced
> > > on that page.
> > >
> > > I have uploaded a typical file with slides to http://pastebin.com/L2ss0hXG
> > > and http://pastebin.com/D61eSkDq.
> > >
> > > When I publish this to PDF with the new exporter the LaTeX file that is
> > > generated does not use any frames http://pastebin.com/8jN6XeuE
> >
> > I think you are doing one of two things wrong. Either your
> > org-latex-classes is incorrectly setup, or you are simply exporting to
> > latex instead of beamer (C-c C-e l b). E.g. I get the following as the
> > first frame:
>
> Thanks, that helps a lot!
>
> I did not have an option to export to beamer. I wasn't aware that I had to
> require ox-beamer explicitly.
Okay good.
> Now I notice that the new exporter makes frame titles like this
>
> \begin{frame}[label=sec-8]{proving \hoareTriple{V}\{\(\textmath{merge}\)\}\{P\}}
>
> where the old one generated this
>
> \begin{frame}
> \frametitle{proving \hoareTriple{V}{\(\textmath{merge}\)}{P}}
> \label{sec-8}
>
> The new exporter escaped some { and } that should not be escaped.
The new exporter tries to preserve special characters whenever it
doesn't recognise a latex snippet. To ensure they are not escaped as
special characters, you should use export snippets. Try:
@@latex:\hoareTriple{V}{@@\(\textmath{merge}\)@@latex:}{P}@@
See the help string for org-export-snippet-translation-alist.
Hope this helps,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2015-09-02 11:13 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-08-30 23:02 porting guide from old to new beamer export? Marko Schütz Schmuck
2015-08-31 0:03 ` Suvayu Ali
2015-08-31 8:11 ` Joseph Vidal-Rosset
2015-08-31 8:32 ` Loris Bennett
2015-08-31 9:46 ` Suvayu Ali
2015-09-01 19:11 ` Joseph Vidal-Rosset
2015-09-02 9:05 ` Suvayu Ali
2015-09-02 11:13 ` Eric S Fraga
2015-08-31 17:23 ` Marko Schütz-Schmuck
2015-08-31 20:50 ` Suvayu Ali
2015-09-01 0:19 ` Marko Schütz-Schmuck
2015-09-01 7:06 ` Suvayu Ali
2015-09-01 18:15 ` Marko Schütz-Schmuck
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).