* MobileOrg on an Android tablet?
[not found] <mailman.133.1342195226.11448.emacs-orgmode@gnu.org>
@ 2012-07-13 18:40 ` Luis Anaya
2012-07-14 8:37 ` How to integrate org-mode in a MS Windows-/Office-based environment? Luis Anaya
1 sibling, 0 replies; 9+ messages in thread
From: Luis Anaya @ 2012-07-13 18:40 UTC (permalink / raw)
To: emacs-orgmode
emacs-orgmode-request@gnu.org writes:
Hi:
> Is anyone using MobileOrg for android on a tablet?
I am... Vizio table running Honeycomb.
>
> More specific question -- is the android version just a phone app that
> will get blown up onto the tablet screen, or will it use the extra
> screen space on a tablet?
It is the android version a phone app. Honeycomb does have options to
manage the real estate on phone apps, being that this option is shown
on phone apps, that's how I know that is a phone app and not a
tablet "native" one.
In the case of mobileorg on Honeycomb, you get more area for text if
you choose to. It works ok. Keep in mind that you're organizing your
life in plain text :)
--
Luis Anaya
papoanaya aroba hot mail punto com
"Do not use 100 words if you can say it in 10" - Yamamoto Tsunetomo
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: How to integrate org-mode in a MS Windows-/Office-based environment?
[not found] <mailman.133.1342195226.11448.emacs-orgmode@gnu.org>
2012-07-13 18:40 ` MobileOrg on an Android tablet? Luis Anaya
@ 2012-07-14 8:37 ` Luis Anaya
2012-07-14 9:56 ` Using HTML or ODF to get content from Org to Word (was: How to integrate org-mode in a MS Windows-/Office-based environment?) Karl Voit
1 sibling, 1 reply; 9+ messages in thread
From: Luis Anaya @ 2012-07-14 8:37 UTC (permalink / raw)
To: emacs-orgmode
Hi:
There have been a list of good suggestions of integrating org-mode with
MS products. I personally use org-mode primarily for task tracking
rather than document generation. I use the following combination of
tools and techniques:
1. I get tickets assign for review on JIRA. I capture those using
jira.el . Yes, I am aware that there is a jira-org tool, but I'm used to
jira.el. I get a list of tickets, highlight any new ones and store them
in remember mode for inclusion into my task file.
2. I do use gnus with IMAP in which I use davmail as the conduit. If you
are lucky to have exchange enabled with IMAP, then you do not need to do
this. In my workplace, that's not the case. The issue of using davmail
is that you get constrained to use emacs 22 being that version of gnus
that is shipped in emacs 23 does not play well with davmail. I have not
tried it with emacs 24. This is mostly for emails and capture any new
tasks or ideas that warrant to be stored for tracking.
3. I do not normally store appointments in org-mode. I rather have my
phone nagging me when a meeting is coming up. I use the weekly agenda
to track deadlines.
Using HTML for export is a good way to transfer content as has been
suggested. In my personal case, most of my documentation stored in org-mode
are meeting notes, I really do not have a need to transfer to Word being
that these are for my use.
--
Luis Anaya
papo anaya aroba hot mail punto com
"Do not use 100 words if you can say it in 10" - Yamamoto Tsunetomo
^ permalink raw reply [flat|nested] 9+ messages in thread* Using HTML or ODF to get content from Org to Word (was: How to integrate org-mode in a MS Windows-/Office-based environment?)
2012-07-14 8:37 ` How to integrate org-mode in a MS Windows-/Office-based environment? Luis Anaya
@ 2012-07-14 9:56 ` Karl Voit
2012-07-14 15:15 ` Giovanni Ridolfi
0 siblings, 1 reply; 9+ messages in thread
From: Karl Voit @ 2012-07-14 9:56 UTC (permalink / raw)
To: emacs-orgmode
* Luis Anaya <papoanaya@hotmail.com> wrote:
>
> There have been a list of good suggestions of integrating org-mode with
> MS products.
[...]
> Using HTML for export is a good way to transfer content as has been
> suggested.
I am a bit puzzled. I thought that using the ODF-exporter would be
the format of choice to get content from Org to Word. Why do you
guys prefer HTML?
--
Karl Voit
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using HTML or ODF to get content from Org to Word (was: How to integrate org-mode in a MS Windows-/Office-based environment?)
2012-07-14 9:56 ` Using HTML or ODF to get content from Org to Word (was: How to integrate org-mode in a MS Windows-/Office-based environment?) Karl Voit
@ 2012-07-14 15:15 ` Giovanni Ridolfi
2012-07-14 15:39 ` Using HTML or ODF to get content from Org to Word Karl Voit
0 siblings, 1 reply; 9+ messages in thread
From: Giovanni Ridolfi @ 2012-07-14 15:15 UTC (permalink / raw)
To: news1142@Karl-Voit.at, emacs-orgmode@gnu.org
Karl Voit <devnull@Karl-Voit.at>
Inviato: Sabato 14 Luglio 2012 11:56
Hi, Karl,
>* Luis Anaya <papoanaya@hotmail.com> wrote:
>> Using HTML for export is a good way to transfer content as has been
>> suggested.
> I thought that using the ODF-exporter would be
> the format of choice to get content from Org to Word. Why do you
> guys prefer HTML?
A reason could be (in my case) because we cannot have LibreOffice installed :-(
But you're right in remembering me that "write" (and perhaps word?) can read odf files.
I will try odf, thanks!
cheers,
Giovanni
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using HTML or ODF to get content from Org to Word
2012-07-14 15:15 ` Giovanni Ridolfi
@ 2012-07-14 15:39 ` Karl Voit
2012-07-14 16:07 ` Jambunathan K
0 siblings, 1 reply; 9+ messages in thread
From: Karl Voit @ 2012-07-14 15:39 UTC (permalink / raw)
To: emacs-orgmode
Hello Giovanni!
* Giovanni Ridolfi <giovanni.ridolfi@yahoo.it> wrote:
> Karl Voit <devnull@Karl-Voit.at>
>
>> I thought that using the ODF-exporter would be the format of
>> choice to get content from Org to Word. Why do you guys prefer
>> HTML?
>
> A reason could be (in my case) because we cannot have LibreOffice
> installed :-(
No need to do that.
(Besides: there are portable-versions of LibreOffice[1] so that you
can install LibreOffice on any operating system having any kind of
reduced permissions. But this is not my point.)
> But you're right in remembering me that "write" (and perhaps
> word?) can read odf files. I will try odf, thanks!
Yes, this was the thing I wanted to mention: Word is able to read in
ODF. And since ODF has a *way* more similar kind of "markup" to
docx, it should result in much better results than using HTML.
But: I never tried it by myself.
So I was wondering, if there are good arguments against using ODF in
the first place and using HTML as best choice.
1. http://duckduckgo.com/?q=libreoffice+portable
--
Karl Voit
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using HTML or ODF to get content from Org to Word
2012-07-14 15:39 ` Using HTML or ODF to get content from Org to Word Karl Voit
@ 2012-07-14 16:07 ` Jambunathan K
2012-07-14 16:16 ` Jambunathan K
2012-07-14 18:00 ` Karl Voit
0 siblings, 2 replies; 9+ messages in thread
From: Jambunathan K @ 2012-07-14 16:07 UTC (permalink / raw)
To: emacs-orgmode
If one does ORG->HTML->DOC instead of ORG->ODT->DOC, following areas
could be problemsome.
- Footnotes
- Inlined images - do they end up right within the document or outside
of it.
See:
http://www.libreoffice.org/download/release-notes/
https://wiki.documentfoundation.org/ReleaseNotes/3.5#ODF_1.2_Conforming_Documents
https://bugs.freedesktop.org/show_bug.cgi?id=44498
,----
| Microsoft Office 2010 will complain that ODF 1.2 and extended documents
| written by LibreOffice 3.5 are invalid (but opens them still). This is a
| shortcoming in MSO2010 only supporting ODF 1.1, please see here for
| further details.
|
| ODF 1.2 Conforming Documents
|
| LibreOffice 3.5 writes valid ODF 1.2
|
| Microsoft Office only officially supports ODF 1.1 and complains that
| ODF 1.2 and ODF 1.2 extended documents written by LibreOffice 3.5
| are invalid.
|
| The warning from Microsoft Office can be safely ignored, and the
| "Repair" option will import the document.
|
| For users that find this annoying, a workaround is to open
| Tools->Options->Load/Save->General and set "ODF format version" to
| "1.0/1.1". However, please note that this will cause some
| information to be lost when storing documents.
`----
Instead of importing ODT documents right inside Microsoft Office, one
can have LibreOffice do the ODT->DOC(X) conversion and import the LO
created DOC(X) file in to Microsoft Office.
For creating DOC/DOCX/PDF files right from Org see Info node with
following title: (org) Extending ODT export.
ps: I have not used MS Word at all.
--
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using HTML or ODF to get content from Org to Word
2012-07-14 16:07 ` Jambunathan K
@ 2012-07-14 16:16 ` Jambunathan K
2012-07-14 18:00 ` Karl Voit
1 sibling, 0 replies; 9+ messages in thread
From: Jambunathan K @ 2012-07-14 16:16 UTC (permalink / raw)
To: emacs-orgmode
For people taking ORG->ODT->Microsoft Office they might want to give
particular attention to the formatting of
- Lists
- Tables
in the imported document.
My best guess is import will be troublefree for the most part. Only
issues could be around the import of customized tables. i.e., tables
created with Info node: "(org) Customizing tables in ODT export".
--
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using HTML or ODF to get content from Org to Word
2012-07-14 16:07 ` Jambunathan K
2012-07-14 16:16 ` Jambunathan K
@ 2012-07-14 18:00 ` Karl Voit
2012-07-14 18:11 ` Jambunathan K
1 sibling, 1 reply; 9+ messages in thread
From: Karl Voit @ 2012-07-14 18:00 UTC (permalink / raw)
To: emacs-orgmode
* Jambunathan K <kjambunathan@gmail.com> wrote:
>
> Instead of importing ODT documents right inside Microsoft Office, one
> can have LibreOffice do the ODT->DOC(X) conversion and import the LO
> created DOC(X) file in to Microsoft Office.
As a side-mark to your great comments: LibreOffice (and
OpenOffice.org) is able to convert documents from command line without
having the need for opening them, invoking a save-as-process,
choosing a different format, and closing it.
If somebody needs to do (semi-automatically) conversions, take a
look into the command line option "--convert-to".
> For creating DOC/DOCX/PDF files right from Org see Info node with
> following title: (org) Extending ODT export.
Cool :-)
> ps: I have not used MS Word at all.
Never? Really? Wow ... Lucky you!
I once met a guy who was working in the IT industry since the
seventies and he never ever used MS Windows in his life. Impressive.
(His source code was completely crap but this is another story *g*)
--
Karl Voit
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Using HTML or ODF to get content from Org to Word
2012-07-14 18:00 ` Karl Voit
@ 2012-07-14 18:11 ` Jambunathan K
0 siblings, 0 replies; 9+ messages in thread
From: Jambunathan K @ 2012-07-14 18:11 UTC (permalink / raw)
To: news1142; +Cc: emacs-orgmode
Karl Voit <devnull@Karl-Voit.at> writes:
> * Jambunathan K <kjambunathan@gmail.com> wrote:
>>
>> Instead of importing ODT documents right inside Microsoft Office, one
>> can have LibreOffice do the ODT->DOC(X) conversion and import the LO
>> created DOC(X) file in to Microsoft Office.
>
> As a side-mark to your great comments: LibreOffice (and
> OpenOffice.org) is able to convert documents from command line without
> having the need for opening them, invoking a save-as-process,
> choosing a different format, and closing it.
>
> If somebody needs to do (semi-automatically) conversions, take a
> look into the command line option "--convert-to".
M-x pp-eval-expresssion RET org-export-odt-convert-processes RET
will you give you this. Note the first entry.
,---- C-h v org-export-odt-convert-processes
| (("LibreOffice" "soffice --headless --convert-to %f%x --outdir %d %i")
| ("unoconv" "unoconv -f %f -o %d %i"))
`----
--
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2012-07-14 18:11 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <mailman.133.1342195226.11448.emacs-orgmode@gnu.org>
2012-07-13 18:40 ` MobileOrg on an Android tablet? Luis Anaya
2012-07-14 8:37 ` How to integrate org-mode in a MS Windows-/Office-based environment? Luis Anaya
2012-07-14 9:56 ` Using HTML or ODF to get content from Org to Word (was: How to integrate org-mode in a MS Windows-/Office-based environment?) Karl Voit
2012-07-14 15:15 ` Giovanni Ridolfi
2012-07-14 15:39 ` Using HTML or ODF to get content from Org to Word Karl Voit
2012-07-14 16:07 ` Jambunathan K
2012-07-14 16:16 ` Jambunathan K
2012-07-14 18:00 ` Karl Voit
2012-07-14 18:11 ` Jambunathan K
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).