* org-mac-protocol problem - Initial content missing @ 2009-08-01 18:59 CHENG Gao 2009-08-02 8:37 ` Christopher Suckling 0 siblings, 1 reply; 8+ messages in thread From: CHENG Gao @ 2009-08-01 18:59 UTC (permalink / raw) To: emacs-orgmode I found "%i" in remember template doesn't work. In remember buffer I only get link to original page. Initial content is not inserted even though I selected them, and even I did "Command-c" after the content is selected. How could I get content remember instead of link? -- Volo, non valeo ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: org-mac-protocol problem - Initial content missing 2009-08-01 18:59 org-mac-protocol problem - Initial content missing CHENG Gao @ 2009-08-02 8:37 ` Christopher Suckling 2009-08-02 9:08 ` CHENG Gao 0 siblings, 1 reply; 8+ messages in thread From: Christopher Suckling @ 2009-08-02 8:37 UTC (permalink / raw) To: CHENG Gao; +Cc: emacs-orgmode On Sun, 02 Aug 2009 02:59:29 +0800, CHENG Gao <chenggao@gmail.com> wrote: > I found "%i" in remember template doesn't work. In remember buffer I > only get link to original page. Initial content is not inserted even > though I selected them, and even I did "Command-c" after the content is > selected. > > How could I get content remember instead of link? To be honest, there's not really enough information here to give an effective answer. Here are two guesses: 1. Initial content is only supported from certain applications - currently Safari, Skim, and (to a very limited extent) BibDesk. This is due to the scope of the applications' AppleScript dictionaries. The manual for org-mac-protocol provides a table of which applications are supported by org-mac-protocol. 2. If the remember template or the note template is not creating a remember buffer at all, the org-mac-protocol.el may not be loading correctly because org-remember-templates has yet to be defined. I am about to publish a small change to org-mac-protocol.el and the documentation that will eliminate this problem. HTH, Christopher ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: org-mac-protocol problem - Initial content missing 2009-08-02 8:37 ` Christopher Suckling @ 2009-08-02 9:08 ` CHENG Gao 2009-08-03 9:09 ` Christopher Suckling 0 siblings, 1 reply; 8+ messages in thread From: CHENG Gao @ 2009-08-02 9:08 UTC (permalink / raw) To: emacs-orgmode *On Sun, 02 Aug 2009 10:37:51 +0200 * Also sprach Christopher Suckling <suckling.list@googlemail.com>: > On Sun, 02 Aug 2009 02:59:29 +0800, CHENG Gao <chenggao@gmail.com> wrote: > >> I found "%i" in remember template doesn't work. In remember buffer I >> only get link to original page. Initial content is not inserted even >> though I selected them, and even I did "Command-c" after the content is >> selected. >> >> How could I get content remember instead of link? > > To be honest, there's not really enough information here to give an > effective answer. Here are two guesses: > > 1. Initial content is only supported from certain applications - > currently Safari, Skim, and (to a very limited extent) BibDesk. This is > due to the scope of the applications' AppleScript dictionaries. The > manual for org-mac-protocol provides a table of which applications are > supported by org-mac-protocol. > > 2. If the remember template or the note template is not creating a > remember buffer at all, the org-mac-protocol.el may not be loading > correctly because org-remember-templates has yet to be defined. I am > about to publish a small change to org-mac-protocol.el and the > documentation that will eliminate this problem. > > HTH, > > Christopher Thank you for your reply. Sorry I did not give enough information in previous posting. I am using Safari. I read the manual, and also read your scripts. I know which applications are supported. For example, I visit the page: http://orgmode.org/worg/org-contrib/org-protocol.php Then I run org-remember from script menu. The remember buffer I got is: ,---- | ## C-c C-c "~/.emacs.d/org/notes.org" -> "* Remember" | ## C-u C-c C-c like C-c C-c, and immediately visit note at target location | ## C-0 C-c C-c "???" -> "* ???" | ## C-1 C-c C-c to select file and header location interactively. | ## C-2 C-c C-c as child of the currently clocked item | ## To switch templates, use `M-x org-remember'. To abort use `C-c C-k'. | | * | | Source: [2009-08-02 Sun], [[http://orgmode.org/worg/org-contrib/org-protocol.php][org-protocol.el – Intercept calls from emacsclient to trigger custom actions:Safari]] `---- Only timestamp and link to source page. My settings are: (I commented out remember template in org-mac-protocol and then put it in ~/.emacs.d/init.el) ,---- | ;;Org Mode | (require 'org-mac-protocol) | (server-start) | | (setq org-directory "~/.emacs.d/org/") | (setq org-default-notes-file "~/.emacs.d/org/notes.org") | (setq org-remember-templates nil) | (add-to-list 'org-remember-templates | '("AppleScript remember" ?y "* %?\n\n Source: %u, %c\n\n %i" (concat org-directory "notes.org") "Remember")) | (add-to-list 'org-remember-templates | '("AppleScript note" ?z "* %?\n\n Source: %u\n" (concat org-directory "notes.org") "Notes")) | (setq remember-annotation-functions '(org-remember-annotation)) | (setq remember-handler-functions '(org-remember-handler)) | (add-hook 'remember-mode-hook 'org-remember-apply-template) | | (require 'org) | (define-key global-map "\C-cl" 'org-store-link) | (define-key global-map "\C-ca" 'org-agenda) | (setq org-log-done t) | `---- org-mac-protocol runs well, just initial content is not inserted. BTW, I suggest to put default remember templates in manual, instructing users to explicitly set templates in .emacs. Users can choose to use default templates or use their own. -- Totus mundus agit histrionem ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Re: org-mac-protocol problem - Initial content missing 2009-08-02 9:08 ` CHENG Gao @ 2009-08-03 9:09 ` Christopher Suckling 2009-08-03 9:33 ` CHENG Gao ` (2 more replies) 0 siblings, 3 replies; 8+ messages in thread From: Christopher Suckling @ 2009-08-03 9:09 UTC (permalink / raw) To: CHENG Gao; +Cc: emacs-orgmode On Sun, 02 Aug 2009 17:08:26 +0800, CHENG Gao <chenggao@gmail.com> wrote: > > For example, I visit the page: > http://orgmode.org/worg/org-contrib/org-protocol.php > > Then I run org-remember from script menu. The remember buffer I got is: > > > ,---- > | ## C-c C-c "~/.emacs.d/org/notes.org" -> "* Remember" > | ## C-u C-c C-c like C-c C-c, and immediately visit note at target location > | ## C-0 C-c C-c "???" -> "* ???" > | ## C-1 C-c C-c to select file and header location interactively. > | ## C-2 C-c C-c as child of the currently clocked item > | ## To switch templates, use `M-x org-remember'. To abort use `C-c C-k'. > | > | * > | > | Source: [2009-08-02 Sun], [[http://orgmode.org/worg/org-contrib/org-protocol.php][org-protocol.el – Intercept calls from emacsclient to trigger custom actions:Safari]] > `---- > > Only timestamp and link to source page. > > My settings are: > (I commented out remember template in org-mac-protocol and then put it > in ~/.emacs.d/init.el) > > ,---- > | ;;Org Mode > | (require 'org-mac-protocol) > | (server-start) > | > | (setq org-directory "~/.emacs.d/org/") > | (setq org-default-notes-file "~/.emacs.d/org/notes.org") > | (setq org-remember-templates nil) > | (add-to-list 'org-remember-templates > | '("AppleScript remember" ?y "* %?\n\n Source: %u, %c\n\n %i" (concat org-directory "notes.org") "Remember")) > | (add-to-list 'org-remember-templates > | '("AppleScript note" ?z "* %?\n\n Source: %u\n" (concat org-directory "notes.org") "Notes")) > | (setq remember-annotation-functions '(org-remember-annotation)) > | (setq remember-handler-functions '(org-remember-handler)) > | (add-hook 'remember-mode-hook 'org-remember-apply-template) > | > | (require 'org) > | (define-key global-map "\C-cl" 'org-store-link) > | (define-key global-map "\C-ca" 'org-agenda) > | (setq org-log-done t) > | > `---- > > org-mac-protocol runs well, just initial content is not inserted. I'm stumped. I can't see anything wrong with the above and an almost identical setup works for me. (I have come across a couple of web pages that don't like the scripts full stop, for example http://jan.ucc.nau.edu/tas3/bnf1.html, but that is not the case here) Suggested debug: Make sure that you're using the latest git org-mode. Open up org-remember.scpt and edit: ,---- | ... | | display dialog theScript | do shell script theScript `---- Does theScript contain the expected content? You could also try running from the terminal: emacsclient org-protocol:/mac-remember:/y/foo/bar/test%20content:Safari and seeing whether `test content' is inserted as initial content > BTW, I suggest to put default remember templates in manual, instructing > users to explicitly set templates in .emacs. Users can choose to use > default templates or use their own. Quite so. Done. Christopher ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: org-mac-protocol problem - Initial content missing 2009-08-03 9:09 ` Christopher Suckling @ 2009-08-03 9:33 ` CHENG Gao 2009-08-03 9:45 ` CHENG Gao 2009-08-03 12:11 ` CHENG Gao 2 siblings, 0 replies; 8+ messages in thread From: CHENG Gao @ 2009-08-03 9:33 UTC (permalink / raw) To: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 4404 bytes --] *On Mon, 03 Aug 2009 11:09:46 +0200 * Also sprach Christopher Suckling <suckling.list@googlemail.com>: > On Sun, 02 Aug 2009 17:08:26 +0800, CHENG Gao <chenggao@gmail.com> wrote: > >> >> For example, I visit the page: >> http://orgmode.org/worg/org-contrib/org-protocol.php >> >> Then I run org-remember from script menu. The remember buffer I got is: >> >> >> ,---- >> | ## C-c C-c "~/.emacs.d/org/notes.org" -> "* Remember" >> | ## C-u C-c C-c like C-c C-c, and immediately visit note at target location >> | ## C-0 C-c C-c "???" -> "* ???" >> | ## C-1 C-c C-c to select file and header location interactively. >> | ## C-2 C-c C-c as child of the currently clocked item >> | ## To switch templates, use `M-x org-remember'. To abort use `C-c C-k'. >> | >> | * >> | >> | Source: [2009-08-02 Sun], [[http://orgmode.org/worg/org-contrib/org-protocol.php][org-protocol.el – Intercept calls from emacsclient to trigger custom actions:Safari]] >> `---- >> >> Only timestamp and link to source page. >> >> My settings are: >> (I commented out remember template in org-mac-protocol and then put it >> in ~/.emacs.d/init.el) >> >> ,---- >> | ;;Org Mode >> | (require 'org-mac-protocol) >> | (server-start) >> | >> | (setq org-directory "~/.emacs.d/org/") >> | (setq org-default-notes-file "~/.emacs.d/org/notes.org") >> | (setq org-remember-templates nil) >> | (add-to-list 'org-remember-templates >> | '("AppleScript remember" ?y "* %?\n\n Source: %u, %c\n\n %i" (concat org-directory "notes.org") "Remember")) >> | (add-to-list 'org-remember-templates >> | '("AppleScript note" ?z "* %?\n\n Source: %u\n" (concat org-directory "notes.org") "Notes")) >> | (setq remember-annotation-functions '(org-remember-annotation)) >> | (setq remember-handler-functions '(org-remember-handler)) >> | (add-hook 'remember-mode-hook 'org-remember-apply-template) >> | >> | (require 'org) >> | (define-key global-map "\C-cl" 'org-store-link) >> | (define-key global-map "\C-ca" 'org-agenda) >> | (setq org-log-done t) >> | >> `---- >> >> org-mac-protocol runs well, just initial content is not inserted. > > I'm stumped. I can't see anything wrong with the above and an almost > identical setup works for me. > > (I have come across a couple of web pages that don't like the scripts > full stop, for example http://jan.ucc.nau.edu/tas3/bnf1.html, but that > is not the case here) > > Suggested debug: > > Make sure that you're using the latest git org-mode. > > Open up org-remember.scpt and edit: > > ,---- > | ... > | > | display dialog theScript > | do shell script theScript > `---- > > Does theScript contain the expected content? > > You could also try running from the terminal: > > emacsclient org-protocol:/mac-remember:/y/foo/bar/test%20content:Safari > > and seeing whether `test content' is inserted as initial content > >> BTW, I suggest to put default remember templates in manual, instructing >> users to explicitly set templates in .emacs. Users can choose to use >> default templates or use their own. > > Quite so. Done. > > Christopher Thank you for your reply. I edited the script to turn on dialog. I can see content is not shown. Please see attached screenshot. Testing page is http://orgmode.org/worg/org-contrib/org-protocol.php. And I run "emacsclient org-protocol:/mac-remember:/y/foo/bar/test%20content:Safari" and got: ,---- | ## C-c C-c "~/.emacs.d/org/notes.org" -> "* Remember" | ## C-u C-c C-c like C-c C-c, and immediately visit note at target location | ## C-0 C-c C-c "???" -> "* ???" | ## C-1 C-c C-c to select file and header location interactively. | ## C-2 C-c C-c as child of the currently clocked item | ## To switch templates, use `M-x org-remember'. To abort use `C-c C-k'. | | * | | Source: [2009-08-03 Mon], [[foo][bar]] | | `---- "test content" is not shown. I use Emacs built from git source: ,---- | GNU Emacs 23.1.50.1 (i386-apple-darwin9.7.0, NS apple-appkit-949.46) | of 2009-07-28 `---- I suppose Org Mode contained is fairly latest. I tried to build git source of Org Mode and failed with error message as: ,---- | In toplevel form: | lisp/org-ascii.el:29:1:Error: Symbol's function definition is void: backup-inhibited | make: *** [lisp/org-ascii.elc] Error 1 `---- It it's important, I installed command line only Emacs 23.1 to /usr/local, and Org build picked it up. So I see see nothing I did wrong. [-- Attachment #2: Picture 14.jpg --] [-- Type: image/jpeg, Size: 41194 bytes --] [-- Attachment #3: Type: text/plain, Size: 69 bytes --] -- The enemies of Freedom do not argue; they shout and they shoot. [-- Attachment #4: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: org-mac-protocol problem - Initial content missing 2009-08-03 9:09 ` Christopher Suckling 2009-08-03 9:33 ` CHENG Gao @ 2009-08-03 9:45 ` CHENG Gao 2009-08-03 10:10 ` CHENG Gao 2009-08-03 12:11 ` CHENG Gao 2 siblings, 1 reply; 8+ messages in thread From: CHENG Gao @ 2009-08-03 9:45 UTC (permalink / raw) To: emacs-orgmode Sorry I posted previous message too fast. I forgot to select some texts while testing. I confirm the dialog shows the content, but *Remember* buffer does not. -- Volo, non valeo ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: org-mac-protocol problem - Initial content missing 2009-08-03 9:45 ` CHENG Gao @ 2009-08-03 10:10 ` CHENG Gao 0 siblings, 0 replies; 8+ messages in thread From: CHENG Gao @ 2009-08-03 10:10 UTC (permalink / raw) To: emacs-orgmode Things are getting complicated. I added "display dialog the Script" to org-remember.scpt. Now when I select some text and run org-remeber script, I can see content is shown in dialog. But after I press OK button, nothing happens. Seems emacsclient can not be triggered. If I dont select any text and run org-remember script, it works correctly. *Remember* buffer shows date and link. So I guess there could be something wrong with URIEscape of the content. I'll uninstalled org-mac-protol and restart from the scratch to check if there is anything wrong with my installation. Though I suppose there is nothing wrong, since I only added one line to org-remember.scpt. -- Totus mundus agit histrionem ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: org-mac-protocol problem - Initial content missing 2009-08-03 9:09 ` Christopher Suckling 2009-08-03 9:33 ` CHENG Gao 2009-08-03 9:45 ` CHENG Gao @ 2009-08-03 12:11 ` CHENG Gao 2 siblings, 0 replies; 8+ messages in thread From: CHENG Gao @ 2009-08-03 12:11 UTC (permalink / raw) To: emacs-orgmode Org git source is just fixed, and I installed Org from git source, and it works terrificly well. So the culprit is Org Mode bundled with Emacs TRUNK. Thank you very much for this great package, and for your help. -- Vivere est cogitare ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2009-08-03 12:12 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2009-08-01 18:59 org-mac-protocol problem - Initial content missing CHENG Gao 2009-08-02 8:37 ` Christopher Suckling 2009-08-02 9:08 ` CHENG Gao 2009-08-03 9:09 ` Christopher Suckling 2009-08-03 9:33 ` CHENG Gao 2009-08-03 9:45 ` CHENG Gao 2009-08-03 10:10 ` CHENG Gao 2009-08-03 12:11 ` CHENG Gao
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).