# Makefile - for the org-mode distribution # # Maintainer: Carsten Dominik # Version: VERSIONTAG # # To install org-mode, edit the Makefile, type `make', then `make install'. # To create the PDF and HTML documentation files, type `make doc'. ##---------------------------------------------------------------------- ## YOU MUST EDIT THE FOLLOWING LINES ##---------------------------------------------------------------------- # Name of your emacs binary EMACS=emacs # Where local software is found prefix=/usr/local # Where local lisp files go. lispdir = $(prefix)/share/emacs/site-lisp # Where info files go. infodir = $(prefix)/share/info ##---------------------------------------------------------------------- ## YOU MAY NEED TO EDIT THESE ##---------------------------------------------------------------------- # Using emacs in batch mode. BATCH=$(EMACS) -batch -q -no-site-file -eval \ "(setq load-path (cons (expand-file-name \"./lisp/\") (cons \"$(lispdir)\" load-path)))" # Specify the byte-compiler for compiling org-mode files ELC= $(BATCH) -f batch-byte-compile # How to make a pdf file from a texinfo file TEXI2PDF = texi2pdf # How to create directories MKDIR = mkdir -p # How to create the info files from the texinfo file MAKEINFO = makeinfo # How to create the HTML file TEXI2HTML = makeinfo --html --number-sections TEXI2HTMLNOPSLIT = makeinfo --html --no-split --number-sections # How to copy the lisp files and elc files to their distination. CP = cp -p # Name of the program to install info files INSTALL_INFO=install-info ##---------------------------------------------------------------------- ## BELOW THIS LINE ON YOUR OWN RISK! ##---------------------------------------------------------------------- # The following variables need to be defined by the maintainer LISPF = org.el \ org-agenda.el \ org-ascii.el \ org-attach.el \ org-archive.el \ org-bbdb.el \ org-beamer.el \ org-bibtex.el \ org-capture.el \ org-clock.el \ org-colview.el \ org-colview-xemacs.el \ org-compat.el \ org-pcomplete.el \ org-crypt.el \ org-ctags.el \ org-datetree.el \ org-docview.el \ org-entities.el \ org-exp.el \ org-exp-blocks.el \ org-docbook.el \ org-faces.el \ org-feed.el \ org-footnote.el \ org-freemind.el \ org-gnus.el \ org-habit.el \ org-html.el \ org-icalendar.el \ org-id.el \ org-indent.el \ org-info.el \ org-inlinetask.el \ org-jsinfo.el \ org-irc.el \ org-latex.el \ org-list.el \ org-mac-message.el \ org-macs.el \ org-mew.el \ org-mhe.el \ org-mks.el \ org-mobile.el \ org-mouse.el \ org-publish.el \ org-plot.el \ org-protocol.el \ org-remember.el \ org-rmail.el \ org-special-blocks.el \ org-src.el \ org-table.el \ org-taskjuggler.el \ org-timer.el \ org-vm.el \ org-w3m.el \ org-wl.el \ org-xoxo.el \ ob.el \ ob-table.el \ ob-lob.el \ ob-ref.el \ ob-exp.el \ ob-tangle.el \ ob-comint.el \ ob-eval.el \ ob-keys.el \ ob-awk.el \ ob-C.el \ ob-calc.el \ ob-ditaa.el \ ob-haskell.el \ ob-perl.el \ ob-sh.el \ ob-R.el \ ob-dot.el \ ob-mscgen.el \ ob-latex.el \ ob-lisp.el \ ob-ledger.el \ ob-python.el \ ob-sql.el \ ob-asymptote.el \ ob-emacs-lisp.el \ ob-matlab.el \ ob-ruby.el \ ob-sqlite.el \ ob-clojure.el \ ob-ocaml.el \ ob-sass.el \ ob-css.el \ ob-gnuplot.el \ ob-octave.el \ ob-screen.el \ ob-plantuml.el \ ob-org.el \ ob-js.el \ ob-scheme.el LISPFILES0 = $(LISPF:%=lisp/%) LISPFILES = $(LISPFILES0) lisp/org-install.el ELCFILES0 = $(LISPFILES0:.el=.elc) ELCFILES = $(LISPFILES:.el=.elc) DOCFILES = doc/org.texi doc/org.pdf doc/org doc/dir \ doc/pdflayout.sty doc/.nosearch \ doc/orgguide.texi doc/orgguide.pdf CARDFILES = doc/orgcard.tex doc/orgcard.pdf doc/orgcard_letter.pdf TEXIFILES = doc/org.texi INFOFILES = doc/org # Package Manager (ELPA) PKG_TAG = $(shell date +%Y%m%d) PKG_DOC = "Outline-based notes management and organizer" PKG_REQ = "nil" PKG_FILES = $(LISPFILES0) \ doc/dir doc/org \ doc/pdflayout.sty \ doc/org.pdf \ doc/orgguide.pdf \ doc/orgcard.tex \ doc/orgcard.pdf \ doc/orgcard_letter.pdf .SUFFIXES: .el .elc .texi SHELL = /bin/sh # Additional distribution files DISTFILES_extra= Makefile request-assign-future.txt contrib default: $(ELCFILES) $(ELCBFILES) all: $(ELCFILES) $(ELCBFILES) $(INFOFILES) up2: update sudo ${MAKE} install update: git pull ${MAKE} clean ${MAKE} all compile: $(ELCFILES0) $(ELCBFILES) install: install-lisp doc: doc/org.html doc/org.pdf doc/orgcard.pdf doc/orgcard_letter.pdf doc/orgguide.pdf doc/orgcard.txt p: ${MAKE} pdf && open doc/org.pdf g: ${MAKE} pdf && open doc/orgguide.pdf install-lisp: $(LISPFILES) $(ELCFILES) if [ ! -d $(lispdir) ]; then $(MKDIR) $(lispdir); else true; fi ; $(CP) $(LISPFILES) $(lispdir) $(CP) $(ELCFILES) $(lispdir) install-info: $(INFOFILES) if [ ! -d $(infodir) ]; then $(MKDIR) $(infodir); else true; fi ; $(CP) $(INFOFILES) $(infodir) $(INSTALL_INFO) --info-file=$(INFOFILES) --info-dir=$(infodir) install-info-debian: $(INFOFILES) $(INSTALL_INFO) --infodir=$(infodir) $(INFOFILES) autoloads: lisp/org-install.el lisp/org-install.el: $(LISPFILES0) Makefile $(BATCH) --eval "(require 'autoload)" \ --eval '(find-file "org-install.el")' \ --eval '(erase-buffer)' \ --eval '(mapc (lambda (x) (generate-file-autoloads (symbol-name x))) (quote ($(LISPFILES0))))' \ --eval '(insert "\n(provide (quote org-install))\n")' \ --eval '(save-buffer)' mv org-install.el lisp doc/org: doc/org.texi cd doc && $(MAKEINFO) --no-split org.texi -o org doc/org.pdf: doc/org.texi cd doc && $(TEXI2PDF) org.texi doc/orgguide.pdf: doc/orgguide.texi cd doc && $(TEXI2PDF) orgguide.texi doc/org.html: doc/org.texi cd doc && $(TEXI2HTML) --no-split -o org.html org.texi UTILITIES/manfull.pl doc/org.html doc/orgcard.pdf: doc/orgcard.tex cd doc && pdftex orgcard.tex doc/orgcard.txt: doc/orgcard.tex cd doc && perl ../UTILITIES/orgcard2txt.pl orgcard.tex > orgcard.txt doc/orgcard_letter.tex: doc/orgcard.tex perl -pe 's/\\pdflayout=\(0l\)/\\pdflayout=(1l)/' \ doc/orgcard.tex > doc/orgcard_letter.tex doc/orgcard_letter.pdf: doc/orgcard_letter.tex cd doc && pdftex orgcard_letter.tex # Below here are special targets for maintenance only html: doc/org.html html_manual: doc/org.texi rm -rf doc/manual mkdir doc/manual $(TEXI2HTML) -o doc/manual doc/org.texi UTILITIES/mansplit.pl doc/manual/*.html html_guide: doc/orgguide.texi rm -rf doc/guide mkdir doc/guide $(TEXI2HTML) -o doc/guide doc/orgguide.texi UTILITIES/guidesplit.pl doc/guide/*.html info: doc/org pdf: doc/org.pdf doc/orgguide.pdf card: doc/orgcard.pdf doc/orgcard_letter.pdf doc/orgcard.txt testrelease: git checkout -b testrelease maint git merge -s recursive -X theirs master UTILITIES/set-version.pl testing git commit -a -m "Release testing" make distfile TAG=testversion make cleanrel rm -rf org-testversion* git reset --hard git checkout master git branch -D testrelease # The following target makes a full release for the stuff that is # currently on master. Do it like this: # # make release TAG=7.01 release: git checkout maint git merge -s recursive -X theirs master UTILITIES/set-version.pl $(TAG) git commit -a -m "Release $(TAG)" make relup TAG=$(TAG) make cleanrel rm -rf org-$(TAG) rm -f org-$(TAG)*.zip rm -f org-$(TAG)*.tar.gz make pushreleasetag TAG=$(TAG) git push -f origin maint git checkout master git merge -s ours maint UTILITIES/set-version.pl -a $(TAG) git commit -a -m "Update website to show $(TAG) as current release" git push # The following target makes a release, but from the stuff that is on # maint, not from the stuff that is on master. The idea is that it pushes # out a minor fix into a minor update, while development on master # already went full steam ahead. To make a micro-relesse, cherry-pick # the necessary changes into maint, then run (with proper version number) # This is just like release, but we skip the step which merges master # into maint. # # make fixrelease TAG=7.01.02 fixrelease: git checkout maint git merge -s recursive -X theirs master UTILITIES/set-version.pl $(TAG) git commit -a -m "Release $(TAG)" make relup TAG=$(TAG) make cleanrel rm -rf org-$(TAG) rm org-$(TAG)*.zip rm org-$(TAG)*.tar.gz make pushreleasetag TAG=$(TAG) git push -f origin maint git checkout master git merge -s ours maint UTILITIES/set-version.pl -o $(TAG) git commit -a -m "Update website to show $(TAG) as current release" git push # ~$ make relup only makes sense from orgmode.org server # Don't call it from your computer! relup: ${MAKE} makerelease ${MAKE} sync_release ${MAKE} sync_manual makerelease: @if [ "X$(TAG)" = "X" ]; then echo "*** No tag ***"; exit 1; fi ${MAKE} distfile ${MAKE} doc UTILITIES/gplmanual.pl ${MAKE} html_manual ${MAKE} html_guide rm -rf RELEASEDIR $(MKDIR) RELEASEDIR cp org-$(TAG).zip org-$(TAG).tar.gz RELEASEDIR cp doc/org.pdf doc/orgcard.pdf doc/org.texi doc/org.html RELEASEDIR cp doc/org_dual_license.texi RELEASEDIR cp doc/orgguide.pdf doc/orgcard.txt RELEASEDIR cp RELEASEDIR/org-$(TAG).zip RELEASEDIR/org.zip cp RELEASEDIR/org-$(TAG).tar.gz RELEASEDIR/org.tar.gz # ~$ make sync_release only makes sense from orgmode.org server # Don't call it from your computer! sync_release: rsync -avuz RELEASEDIR/ /var/www/orgmode.org/ # ~$ make sync_manual only makes sense from orgmode.org server # Don't call it from your computer! sync_manual: rsync -avuz --delete doc/manual/ /var/www/orgmode.org/manual/ rsync -avuz --delete doc/guide/ /var/www/orgmode.org/guide/ distfile: @if [ "X$(TAG)" = "X" ]; then echo "*** No tag ***"; exit 1; fi touch doc/org.texi doc/orgcard.tex # force update ${MAKE} cleancontrib ${MAKE} info ${MAKE} doc ${MAKE} lisp/org-install.el rm -rf org-$(TAG) org-$(TAG).zip $(MKDIR) org-$(TAG) $(MKDIR) org-$(TAG)/doc $(MKDIR) org-$(TAG)/lisp cp -r $(LISPFILES) org-$(TAG)/lisp cp -r $(DOCFILES) $(CARDFILES) org-$(TAG)/doc cp -r $(DISTFILES_extra) org-$(TAG)/ cp -r README_DIST org-$(TAG)/README zip -r org-$(TAG).zip org-$(TAG) tar zcvf org-$(TAG).tar.gz org-$(TAG) pkg: @if [ "X$(PKG_TAG)" = "X" ]; then echo "*** No tag ***"; exit 1; fi touch doc/org.texi doc/orgcard.tex # force update ${MAKE} info ${MAKE} doc rm -rf org-$(PKG_TAG) org-$(PKG_TAG).tar $(MKDIR) org-$(PKG_TAG) cp -r $(PKG_FILES) org-$(PKG_TAG) echo "(define-package \"org\" \"$(PKG_TAG)\" \"$(PKG_DOC)\" $(PKG_REQ))" > org-$(PKG_TAG)/org-pkg.el tar cf org-$(PKG_TAG).tar org-$(PKG_TAG) --remove-files cleanall: ${MAKE} clean rm -f lisp/org-install.el clean: ${MAKE} cleanelc ${MAKE} cleandoc ${MAKE} cleanrel rm -f *~ */*~ */*/*~ cleancontrib: find contrib -name \*~ -exec rm {} \; cleanelc: rm -f $(ELCFILES) cleandoc: -cd doc && rm -f org.pdf org org.html orgcard.pdf orgguide.pdf -cd doc && rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.pg *.pgs -cd doc && rm -f *.toc *.tp *.tps *.vr *.vrs *.log *.html *.ps -cd doc && rm -f orgcard_letter.tex orgcard_letter.pdf -cd doc && rm -rf manual cleanrel: rm -rf RELEASEDIR rm -rf org-7.* rm -rf org-7*zip org-7*tar.gz .el.elc: $(ELC) $< push: git-push orgmode@orgmode.org:org-mode.git master pushtag: git-tag -m "Adding tag" -a $(TAG) git-push orgmode@orgmode.org:org-mode.git $(TAG) pushreleasetag: git-tag -m "Adding release tag" -a release_$(TAG) git-push orgmode@orgmode.org:org-mode.git release_$(TAG) # Dependencies lisp/org.elc: lisp/org-macs.el lisp/org-compat.el lisp/org-faces.el lisp/org-agenda.elc: lisp/org.el lisp/org-ascii.elc: lisp/org-exp.el lisp/org-attach.elc: lisp/org.el lisp/org-id.el lisp/org-archive.elc: lisp/org.el lisp/org-bbdb.elc: lisp/org.el lisp/org-beamer.elc: lisp/org.el lisp/org-bibtex.elc: lisp/org.el lisp/org-capture.elc: lisp/org.el lisp/org-mks.el lisp/org-clock.elc: lisp/org.el lisp/org-colview.elc: lisp/org.el lisp/org-colview-xemacs.elc: lisp/org.el lisp/org-compat.elc: lisp/org-macs.el lisp/org-crypt.elc: lisp/org-crypt.el lisp/org.el lisp/org-ctags.elc: lisp/org.el lisp/org-datetree.elc: lisp/org.el lisp/org-docview.elc: lisp/org.el lisp/org-entities.elc: lisp/org-exp.elc: lisp/org.el lisp/org-agenda.el lisp/org-exp-blocks.elc: lisp/org.el lisp/org-latex.elc: lisp/org.el lisp/org-exp.el lisp/org-beamer.el lisp/org-docbook.elc: lisp/org.el lisp/org-exp.el lisp/org-faces.elc: lisp/org-macs.el lisp/org-compat.el lisp/org-feed.elc: lisp/org.el lisp/org-footnotes.elc: lisp/org-macs.el lisp/org-compat.el lisp/org-freemind.elc: lisp/org.el lisp/org-gnus.elc: lisp/org.el lisp/org-html.elc: lisp/org-exp.el lisp/org-habit.elc: lisp/org.el lisp/org-agenda.el lisp/org-icalendar.elc: lisp/org-exp.el lisp/org-id.elc: lisp/org.el lisp/org-indent.elc: lisp/org.el lisp/org-macs.el lisp/org-compat.el lisp/org-info.elc: lisp/org.el lisp/org-inlinetask.elc: lisp/org-irc.elc: lisp/org.el lisp/org-jsinfo.elc: lisp/org.el lisp/org-exp.el lisp/org-list.elc: lisp/org-macs.el lisp/org-compat.el lisp/org-mac-message.elc: lisp/org.el lisp/org-macs.elc: lisp/org-mew.elc: lisp/org.el lisp/org-mhe.elc: lisp/org.el lisp/org-mks.elc: lisp/org-mobile.elc: lisp/org.el lisp/org-mouse.elc: lisp/org.el lisp/org-plot.elc: lisp/org.el lisp/org-exp.el lisp/org-table.el lisp/org-publish.elc: lisp/org-protocol.elc: lisp/org.el lisp/org-remember.elc: lisp/org.el lisp/org-rmail.elc: lisp/org.el lisp/org-special-blocks.elc: lisp/org-compat.el lisp/org-src.elc: lisp/org-macs.el lisp/org-compat.el lisp/org-table.elc: lisp/org.el lisp/org-taskjuggler.elc: lisp/org.el lisp/org-exp.el lisp/org-timer.elc: lisp/org.el lisp/org-vm.elc: lisp/org.el lisp/org-w3m.elc: lisp/org.el lisp/org-wl.elc: lisp/org.el lisp/org-xoxo.elc: lisp/org-exp.el