\input texinfo @c %**start of header @setfilename ../../info/orgguide @settitle The compact Org-mode Guide @include org-version.inc @c Use proper quote and backtick for code sections in PDF output @c Cf. Texinfo manual 14.2 @set txicodequoteundirected @set txicodequotebacktick @c Version and Contact Info @set MAINTAINERSITE @uref{http://orgmode.org,maintainers webpage} @set AUTHOR Carsten Dominik @set MAINTAINER Carsten Dominik @set MAINTAINEREMAIL @email{carsten at orgmode dot org} @set MAINTAINERCONTACT @uref{mailto:carsten at orgmode dot org,contact the maintainer} @c %**end of header @finalout @c Macro definitions @iftex @c @hyphenation{time-stamp time-stamps time-stamp-ing time-stamp-ed} @end iftex @c Subheadings inside a table. @macro tsubheading{text} @ifinfo @subsubheading \text\ @end ifinfo @ifnotinfo @item @b{\text\} @end ifnotinfo @end macro @macro seealso{text} @noindent @b{Further reading}@*@noindent \text\ @end macro @copying Copyright @copyright{} 2010--2014 Free Software Foundation @quotation Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.3 or any later version published by the Free Software Foundation; with no Invariant Sections, with the Front-Cover texts being ``A GNU Manual,'' and with the Back-Cover Texts as in (a) below. A copy of the license is included in the section entitled ``GNU Free Documentation License'' in the full Org manual, which is distributed together with the compact guide. (a) The FSF's Back-Cover Text is: ``You have the freedom to copy and modify this GNU manual.'' @end quotation @end copying @dircategory Emacs @direntry * Org Mode Guide: (orgguide). Abbreviated Org-mode Manual @end direntry @titlepage @title The compact Org-mode Guide @subtitle Release @value{VERSION} @author by Carsten Dominik @c The following two commands start the copyright page. @page @vskip 0pt plus 1filll @insertcopying @end titlepage @c Output the table of contents at the beginning. @shortcontents @ifnottex @node Top, Introduction, (dir), (dir) @top Org Mode Guide @insertcopying @end ifnottex @menu * Introduction:: Getting started * Document Structure:: A tree works like your brain * Tables:: Pure magic for quick formatting * Hyperlinks:: Notes in context * TODO Items:: Every tree branch can be a TODO item * Tags:: Tagging headlines and matching sets of tags * Properties:: Properties * Dates and Times:: Making items useful for planning * Capture - Refile - Archive:: The ins and outs for projects * Agenda Views:: Collecting information into views * Markup:: Prepare text for rich export * Exporting:: Sharing and publishing of notes * Publishing:: Create a web site of linked Org files * Working With Source Code:: Source code snippets embedded in Org * Miscellaneous:: All the rest which did not fit elsewhere * GNU Free Documentation License:: This manual license. @detailmenu --- The Detailed Node Listing --- Introduction * Preface:: Welcome * Installation:: How to install a downloaded version of Org * Activation:: How to activate Org for certain buffers * Feedback:: Bug reports, ideas, patches etc. Document Structure * Outlines:: Org is based on Outline mode * Headlines:: How to typeset Org tree headlines * Visibility cycling:: Show and hide, much simplified * Motion:: Jumping to other headlines * Structure editing:: Changing sequence and level of headlines * Sparse trees:: Matches embedded in context * Plain lists:: Additional structure within an entry * Footnotes:: How footnotes are defined in Org's syntax Hyperlinks * Link format:: How links in Org are formatted * Internal links:: Links to other places in the current file * External links:: URL-like links to the world * Handling links:: Creating, inserting and following * Targeted links:: Point at a location in a file TODO Items * Using TODO states:: Setting and switching states * Multi-state workflows:: More than just on/off * Progress logging:: Dates and notes for progress * Priorities:: Some things are more important than others * Breaking down tasks:: Splitting a task into manageable pieces * Checkboxes:: Tick-off lists Progress logging * Closing items:: When was this entry marked DONE? * Tracking TODO state changes:: When did the status change? Tags * Tag inheritance:: Tags use the tree structure of the outline * Setting tags:: How to assign tags to a headline * Tag groups:: Use one tag to search for several tags * Tag searches:: Searching for combinations of tags Dates and Times * Timestamps:: Assigning a time to a tree entry * Creating timestamps:: Commands which insert timestamps * Deadlines and scheduling:: Planning your work * Clocking work time:: Tracking how long you spend on a task Capture - Refile - Archive * Capture:: Capturing new stuff * Refile and copy:: Moving a tree from one place to another * Archiving:: What to do with finished projects Capture * Setting up a capture location:: Where notes will be stored * Using capture:: Commands to invoke and terminate capture * Capture templates:: Define the outline of different note types Agenda Views * Agenda files:: Files being searched for agenda information * Agenda dispatcher:: Keyboard access to agenda views * Built-in agenda views:: What is available out of the box? * Agenda commands:: Remote editing of Org trees * Custom agenda views:: Defining special searches and views The built-in agenda views * Weekly/daily agenda:: The calendar page with current tasks * Global TODO list:: All unfinished action items * Matching tags and properties:: Structured information with fine-tuned search * Timeline:: Time-sorted view for single file * Search view:: Find entries by searching for text Markup for rich export * Structural markup elements:: The basic structure as seen by the exporter * Images and tables:: Images, tables and caption mechanism * Literal examples:: Source code examples with special formatting * Include files:: Include additional files into a document * Embedded @LaTeX{}:: @LaTeX{} can be freely used inside Org documents Structural markup elements * Document title:: Where the title is taken from * Headings and sections:: The document structure as seen by the exporter * Table of contents:: The if and where of the table of contents * Paragraphs:: Paragraphs * Emphasis and monospace:: Bold, italic, etc. * Comment lines:: What will *not* be exported Exporting * Export options:: Per-file export settings * The export dispatcher:: How to access exporter commands * ASCII/Latin-1/UTF-8 export:: Exporting to flat files with encoding * HTML export:: Exporting to HTML * @LaTeX{} and PDF export:: Exporting to @LaTeX{}, and processing to PDF * iCalendar export:: Exporting to iCalendar Miscellaneous * Completion:: M-TAB knows what you need * Clean view:: Getting rid of leading stars in the outline * MobileOrg:: Org-mode on the iPhone @end detailmenu @end menu @node Introduction, Document Structure, Top, Top @chapter Introduction @menu * Preface:: Welcome * Installation:: How to install a downloaded version of Org * Activation:: How to activate Org for certain buffers * Feedback:: Bug reports, ideas, patches etc. @end menu @node Preface, Installation, Introduction, Introduction @section Preface Org is a mode for keeping notes, maintaining TODO lists, and doing project planning with a fast and effective plain-text system. It is also an authoring and publishing system, and it supports working with source code for literal programming and reproducible research. @i{This document is a much compressed derivative of the @uref{http://orgmode.org/index.html#sec-4_1, comprehensive Org-mode manual}. It contains all basic features and commands, along with important hints for customization. It is intended for beginners who would shy back from a 200 page manual because of sheer size.} @node Installation, Activation, Preface, Introduction @section Installation @b{Important:} @i{If you are using a version of Org that is part of the Emacs distribution or an XEmacs package, please skip this section and go directly to @ref{Activation}.} If you have downloaded Org from the Web, either as a distribution @file{.zip} or @file{.tar} file, or as a Git archive, it is best to run it directly from the distribution directory. You need to add the @file{lisp} subdirectories to the Emacs load path. To do this, add the following line to @file{.emacs}: @smallexample (setq load-path (cons "~/path/to/orgdir/lisp" load-path)) (setq load-path (cons "~/path/to/orgdir/contrib/lisp" load-path)) @end smallexample @noindent If you have been using git or a tar ball to get Org, you need to run the following command to generate autoload information. command: @smallexample make autoloads @end smallexample @node Activation, Feedback, Installation, Introduction @section Activation Add the following lines to your @file{.emacs} file. The last four lines define @emph{global} keys for some commands --- please choose suitable keys yourself. @smalllisp ;; The following lines are always needed. Choose your own keys. (global-set-key "\C-cl" 'org-store-link) (global-set-key "\C-ca" 'org-agenda) (global-set-key "\C-cc" 'org-capture) (global-set-key "\C-cb" 'org-iswitchb) @end smalllisp Files with extension @samp{.org} will be put into Org mode automatically. @node Feedback, , Activation, Introduction @section Feedback If you find problems with Org, or if you have questions, remarks, or ideas about it, please mail to the Org mailing list @email{emacs-orgmode@@gnu.org}. For information on how to submit bug reports, see the main manual. @node Document Structure, Tables, Introduction, Top @chapter Document Structure Org is based on Outline mode and provides flexible commands to edit the structure of the document. @menu * Outlines:: Org is based on Outline mode * Headlines:: How to typeset Org tree headlines * Visibility cycling:: Show and hide, much simplified * Motion:: Jumping to other headlines * Structure editing:: Changing sequence and level of headlines * Sparse trees:: Matches embedded in context * Plain lists:: Additional structure within an entry * Footnotes:: How footnotes are defined in Org's syntax @end menu @node Outlines, Headlines, Document Structure, Document Structure @section Outlines Org is implemented on top of Outline mode. Outlines allow a document to be organized in a hierarchical structure, which (at least for me) is the best representation of notes and thoughts. An overview of this structure is achieved by folding (hiding) large parts of the document to show only the general document structure and the parts currently being worked on. Org greatly simplifies the use of outlines by compressing the entire show/hide functionality into a single command, @command{org-cycle}, which is bound to the @key{TAB} key. @node Headlines, Visibility cycling, Outlines, Document Structure @section Headlines Headlines define the structure of an outline tree. The headlines in Org start with one or more stars, on the left margin@footnote{See the variable @code{org-special-ctrl-a/e} to configure special behavior of @kbd{C-a} and @kbd{C-e} in headlines.}. For example: @smallexample * Top level headline ** Second level *** 3rd level some text *** 3rd level more text * Another top level headline @end smallexample @noindent Some people find the many stars too noisy and would prefer an outline that has whitespace followed by a single star as headline starters. @ref{Clean view}, describes a setup to realize this. @node Visibility cycling, Motion, Headlines, Document Structure @section Visibility cycling Outlines make it possible to hide parts of the text in the buffer. Org uses just two commands, bound to @key{TAB} and @kbd{S-@key{TAB}} to change the visibility in the buffer. @table @kbd @item @key{TAB} @emph{Subtree cycling}: Rotate current subtree among the states @smallexample ,-> FOLDED -> CHILDREN -> SUBTREE --. '-----------------------------------' @end smallexample When called with a prefix argument (@kbd{C-u @key{TAB}}) or with the shift key, global cycling is invoked. @item S-@key{TAB} @r{and} C-u @key{TAB} @emph{Global cycling}: Rotate the entire buffer among the states @smallexample ,-> OVERVIEW -> CONTENTS -> SHOW ALL --. '--------------------------------------' @end smallexample @item C-u C-u C-u @key{TAB} Show all, including drawers. @end table When Emacs first visits an Org file, the global state is set to OVERVIEW, i.e.@: only the top level headlines are visible. This can be configured through the variable @code{org-startup-folded}, or on a per-file basis by adding a startup keyword @code{overview}, @code{content}, @code{showall}, like this: @smallexample #+STARTUP: content @end smallexample @node Motion, Structure editing, Visibility cycling, Document Structure @section Motion The following commands jump to other headlines in the buffer. @table @kbd @item C-c C-n Next heading. @item C-c C-p Previous heading. @item C-c C-f Next heading same level. @item C-c C-b Previous heading same level. @item C-c C-u Backward to higher level heading. @end table @node Structure editing, Sparse trees, Motion, Document Structure @section Structure editing @table @kbd @item M-@key{RET} Insert new heading with same level as current. If the cursor is in a plain list item, a new item is created (@pxref{Plain lists}). When this command is used in the middle of a line, the line is split and the rest of the line becomes the new headline@footnote{If you do not want the line to be split, customize the variable @code{org-M-RET-may-split-line}.}. @item M-S-@key{RET} Insert new TODO entry with same level as current heading. @item @key{TAB} @r{in new, empty entry} In a new entry with no text yet, @key{TAB} will cycle through reasonable levels. @item M-@key{left}@r{/}@key{right} Promote/demote current heading by one level. @item M-S-@key{left}@r{/}@key{right} Promote/demote the current subtree by one level. @item M-S-@key{up}@r{/}@key{down} Move subtree up/down (swap with previous/next subtree of same level). @item C-c C-w Refile entry or region to a different location. @xref{Refile and copy}. @item C-x n s/w Narrow buffer to current subtree / widen it again @end table When there is an active region (Transient Mark mode), promotion and demotion work on all headlines in the region. @node Sparse trees, Plain lists, Structure editing, Document Structure @section Sparse trees An important feature of Org mode is the ability to construct @emph{sparse trees} for selected information in an outline tree, so that the entire document is folded as much as possible, but the selected information is made visible along with the headline structure above it@footnote{See also the variables @code{org-show-hierarchy-above}, @code{org-show-following-heading}, @code{org-show-siblings}, and @code{org-show-entry-below} for detailed control on how much context is shown around each match.}. Just try it out and you will see immediately how it works. Org mode contains several commands creating such trees, all these commands can be accessed through a dispatcher: @table @kbd @item C-c / This prompts for an extra key to select a sparse-tree creating command. @item C-c / r Occur. Prompts for a regexp and shows a sparse tree with all matches. Each match is also highlighted; the highlights disappear by pressing @kbd{C-c C-c}. @end table The other sparse tree commands select headings based on TODO keywords, tags, or properties and will be discussed later in this manual. @node Plain lists, Footnotes, Sparse trees, Document Structure @section Plain lists Within an entry of the outline tree, hand-formatted lists can provide additional structure. They also provide a way to create lists of checkboxes (@pxref{Checkboxes}). Org supports editing such lists, and the HTML exporter (@pxref{Exporting}) parses and formats them. Org knows ordered lists, unordered lists, and description lists. @itemize @bullet @item @emph{Unordered} list items start with @samp{-}, @samp{+}, or @samp{*} as bullets. @item @emph{Ordered} list items start with @samp{1.} or @samp{1)}. @item @emph{Description} list use @samp{ :: } to separate the @emph{term} from the description. @end itemize Items belonging to the same list must have the same indentation on the first line. An item ends before the next line that is indented like its bullet/number, or less. A list ends when all items are closed, or before two blank lines. An example: @smallexample @group ** Lord of the Rings My favorite scenes are (in this order) 1. The attack of the Rohirrim 2. Eowyn's fight with the witch king + this was already my favorite scene in the book + I really like Miranda Otto. Important actors in this film are: - @b{Elijah Wood} :: He plays Frodo - @b{Sean Austin} :: He plays Sam, Frodo's friend. @end group @end smallexample The following commands act on items when the cursor is in the first line of an item (the line with the bullet or number). @table @kbd @item @key{TAB} Items can be folded just like headline levels. @item M-@key{RET} Insert new item at current level. With a prefix argument, force a new heading (@pxref{Structure editing}). @item M-S-@key{RET} Insert a new item with a checkbox (@pxref{Checkboxes}). @item M-S-@key{up}@r{/}@key{down} Move the item including subitems up/down (swap with previous/next item of same indentation). If the list is ordered, renumbering is automatic. @item M-@key{left}@r{/}M-@key{right} Decrease/increase the indentation of an item, leaving children alone. @item M-S-@key{left}@r{/}@key{right} Decrease/increase the indentation of the item, including subitems. @item C-c C-c If there is a checkbox (@pxref{Checkboxes}) in the item line, toggle the state of the checkbox. Also verify bullets and indentation consistency in the whole list. @item C-c - Cycle the entire list level through the different itemize/enumerate bullets (@samp{-}, @samp{+}, @samp{*}, @samp{1.}, @samp{1)}). @end table @node Footnotes, , Plain lists, Document Structure @section Footnotes A footnote is defined in a paragraph that is started by a footnote marker in square brackets in column 0, no indentation allowed. The footnote reference is simply the marker in square brackets, inside text. For example: @smallexample The Org homepage[fn:1] now looks a lot better than it used to. ... [fn:1] The link is: http://orgmode.org @end smallexample @noindent The following commands handle footnotes: @table @kbd @item C-c C-x f The footnote action command. When the cursor is on a footnote reference, jump to the definition. When it is at a definition, jump to the (first) reference. Otherwise, create a new footnote. When this command is called with a prefix argument, a menu of additional options including renumbering is offered. @item C-c C-c Jump between definition and reference. @end table @seealso{ @uref{http://orgmode.org/manual/Document-Structure.html#Document-Structure, Chapter 2 of the manual}@* @uref{http://sachachua.com/wp/2008/01/outlining-your-notes-with-org/, Sacha Chua's tutorial}} @node Tables, Hyperlinks, Document Structure, Top @chapter Tables Org comes with a fast and intuitive table editor. Spreadsheet-like calculations are supported in connection with the Emacs @file{calc} package @ifinfo (@pxref{Top,Calc,,Calc,Gnu Emacs Calculator Manual}). @end ifinfo @ifnotinfo (see the Emacs Calculator manual for more information about the Emacs calculator). @end ifnotinfo Org makes it easy to format tables in plain ASCII. Any line with @samp{|} as the first non-whitespace character is considered part of a table. @samp{|} is also the column separator. A table might look like this: @smallexample | Name | Phone | Age | |-------+-------+-----| | Peter | 1234 | 17 | | Anna | 4321 | 25 | @end smallexample A table is re-aligned automatically each time you press @key{TAB} or @key{RET} or @kbd{C-c C-c} inside the table. @key{TAB} also moves to the next field (@key{RET} to the next row) and creates new table rows at the end of the table or before horizontal lines. The indentation of the table is set by the first line. Any line starting with @samp{|-} is considered as a horizontal separator line and will be expanded on the next re-align to span the whole table width. So, to create the above table, you would only type @smallexample |Name|Phone|Age| |- @end smallexample @noindent and then press @key{TAB} to align the table and start filling in fields. Even faster would be to type @code{|Name|Phone|Age} followed by @kbd{C-c @key{RET}}. When typing text into a field, Org treats @key{DEL}, @key{Backspace}, and all character keys in a special way, so that inserting and deleting avoids shifting other fields. Also, when typing @emph{immediately after the cursor was moved into a new field with @kbd{@key{TAB}}, @kbd{S-@key{TAB}} or @kbd{@key{RET}}}, the field is automatically made blank. @table @kbd @tsubheading{Creation and conversion} @item C-c | Convert the active region to table. If every line contains at least one TAB character, the function assumes that the material is tab separated. If every line contains a comma, comma-separated values (CSV) are assumed. If not, lines are split at whitespace into fields. @* If there is no active region, this command creates an empty Org table. But it's easier just to start typing, like @kbd{|Name|Phone|Age C-c @key{RET}}. @tsubheading{Re-aligning and field motion} @item C-c C-c Re-align the table without moving the cursor. @c @item @key{TAB} Re-align the table, move to the next field. Creates a new row if necessary. @c @item S-@key{TAB} Re-align, move to previous field. @c @item @key{RET} Re-align the table and move down to next row. Creates a new row if necessary. @tsubheading{Column and row editing} @item M-@key{left} @itemx M-@key{right} Move the current column left/right. @c @item M-S-@key{left} Kill the current column. @c @item M-S-@key{right} Insert a new column to the left of the cursor position. @c @item M-@key{up} @itemx M-@key{down} Move the current row up/down. @c @item M-S-@key{up} Kill the current row or horizontal line. @c @item M-S-@key{down} Insert a new row above the current row. With a prefix argument, the line is created below the current one. @c @item C-c - Insert a horizontal line below current row. With a prefix argument, the line is created above the current line. @c @item C-c @key{RET} Insert a horizontal line below current row, and move the cursor into the row below that line. @c @item C-c ^ Sort the table lines in the region. The position of point indicates the column to be used for sorting, and the range of lines is the range between the nearest horizontal separator lines, or the entire table. @end table @seealso{ @uref{http://orgmode.org/manual/Tables.html#Tables, Chapter 3 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/tables.php, Bastien's table tutorial}@* @uref{http://orgmode.org/worg/org-tutorials/org-spreadsheet-intro.php, Bastien's spreadsheet tutorial}@* @uref{http://orgmode.org/worg/org-tutorials/org-plot.php, Eric's plotting tutorial}} @node Hyperlinks, TODO Items, Tables, Top @chapter Hyperlinks Like HTML, Org provides links inside a file, external links to other files, Usenet articles, emails, and much more. @menu * Link format:: How links in Org are formatted * Internal links:: Links to other places in the current file * External links:: URL-like links to the world * Handling links:: Creating, inserting and following * Targeted links:: Point at a location in a file @end menu @node Link format, Internal links, Hyperlinks, Hyperlinks @section Link format Org will recognize plain URL-like links and activate them as clickable links. The general link format, however, looks like this: @smallexample [[link][description]] @r{or alternatively} [[link]] @end smallexample @noindent Once a link in the buffer is complete (all brackets present), Org will change the display so that @samp{description} is displayed instead of @samp{[[link][description]]} and @samp{link} is displayed instead of @samp{[[link]]}. To edit the invisible @samp{link} part, use @kbd{C-c C-l} with the cursor on the link. @node Internal links, External links, Link format, Hyperlinks @section Internal links If the link does not look like a URL, it is considered to be internal in the current file. The most important case is a link like @samp{[[#my-custom-id]]} which will link to the entry with the @code{CUSTOM_ID} property @samp{my-custom-id}. Links such as @samp{[[My Target]]} or @samp{[[My Target][Find my target]]} lead to a text search in the current file for the corresponding target which looks like @samp{<>}. Internal links will be used to reference their destination, through links or numbers, when possible. @node External links, Handling links, Internal links, Hyperlinks @section External links Org supports links to files, websites, Usenet and email messages, BBDB database entries and links to both IRC conversations and their logs. External links are URL-like locators. They start with a short identifying string followed by a colon. There can be no space after the colon. Here are some examples: @smallexample http://www.astro.uva.nl/~dominik @r{on the web} file:/home/dominik/images/jupiter.jpg @r{file, absolute path} /home/dominik/images/jupiter.jpg @r{same as above} file:papers/last.pdf @r{file, relative path} file:projects.org @r{another Org file} docview:papers/last.pdf::NNN @r{open file in doc-view mode at page NNN} id:B7423F4D-2E8A-471B-8810-C40F074717E9 @r{Link to heading by ID} news:comp.emacs @r{Usenet link} mailto:adent@@galaxy.net @r{Mail link} vm:folder @r{VM folder link} vm:folder#id @r{VM message link} wl:folder#id @r{WANDERLUST message link} mhe:folder#id @r{MH-E message link} rmail:folder#id @r{RMAIL message link} gnus:group#id @r{Gnus article link} bbdb:R.*Stallman @r{BBDB link (with regexp)} irc:/irc.com/#emacs/bob @r{IRC link} info:org:External%20links @r{Info node link (with encoded space)} @end smallexample A link should be enclosed in double brackets and may contain a descriptive text to be displayed instead of the URL (@pxref{Link format}), for example: @smallexample [[http://www.gnu.org/software/emacs/][GNU Emacs]] @end smallexample @noindent If the description is a file name or URL that points to an image, HTML export (@pxref{HTML export}) will inline the image as a clickable button. If there is no description at all and the link points to an image, that image will be inlined into the exported HTML file. @node Handling links, Targeted links, External links, Hyperlinks @section Handling links Org provides methods to create a link in the correct syntax, to insert it into an Org file, and to follow the link. @table @kbd @item C-c l Store a link to the current location. This is a @emph{global} command (you must create the key binding yourself) which can be used in any buffer to create a link. The link will be stored for later insertion into an Org buffer (see below). @c @item C-c C-l Insert a link. This prompts for a link to be inserted into the buffer. You can just type a link, or use history keys @key{up} and @key{down} to access stored links. You will be prompted for the description part of the link. When called with a @kbd{C-u} prefix argument, file name completion is used to link to a file. @c @item C-c C-l @r{(with cursor on existing link)} When the cursor is on an existing link, @kbd{C-c C-l} allows you to edit the link and description parts of the link. @c @item C-c C-o @r{or} mouse-1 @r{or} mouse-2 Open link at point. @item C-c & Jump back to a recorded position. A position is recorded by the commands following internal links, and by @kbd{C-c %}. Using this command several times in direct succession moves through a ring of previously recorded positions. @c @end table @node Targeted links, , Handling links, Hyperlinks @section Targeted links File links can contain additional information to make Emacs jump to a particular location in the file when following a link. This can be a line number or a search option after a double colon. Here is the syntax of the different ways to attach a search to a file link, together with an explanation: @smallexample [[file:~/code/main.c::255]] @r{Find line 255} [[file:~/xx.org::My Target]] @r{Find @samp{<>}} [[file:~/xx.org::#my-custom-id]] @r{Find entry with custom id} @end smallexample @seealso{ @uref{http://orgmode.org/manual/Hyperlinks.html#Hyperlinks, Chapter 4 of the manual}} @node TODO Items, Tags, Hyperlinks, Top @chapter TODO Items Org mode does not require TODO lists to live in separate documents. Instead, TODO items are part of a notes file, because TODO items usually come up while taking notes! With Org mode, simply mark any entry in a tree as being a TODO item. In this way, information is not duplicated, and TODO items remain in the context from which they emerged. Org mode providing methods to give you an overview of all the things that you have to do, collected from many files. @menu * Using TODO states:: Setting and switching states * Multi-state workflows:: More than just on/off * Progress logging:: Dates and notes for progress * Priorities:: Some things are more important than others * Breaking down tasks:: Splitting a task into manageable pieces * Checkboxes:: Tick-off lists @end menu @node Using TODO states, Multi-state workflows, TODO Items, TODO Items @section Using TODO states Any headline becomes a TODO item when it starts with the word @samp{TODO}, for example: @smallexample *** TODO Write letter to Sam Fortune @end smallexample @noindent The most important commands to work with TODO entries are: @table @kbd @item C-c C-t Rotate the TODO state of the current item among @smallexample (unmarked) -> TODO -> DONE -> (unmarked) @end smallexample The same rotation can also be done ``remotely'' from the timeline and agenda buffers with the @kbd{t} command key (@pxref{Agenda commands}). @item S-@key{right}@r{/}@key{left} Select the following/preceding TODO state, similar to cycling. @item C-c / t View TODO items in a @emph{sparse tree} (@pxref{Sparse trees}). Folds the buffer, but shows all TODO items and the headings hierarchy above them. @item C-c a t Show the global TODO list. Collects the TODO items from all agenda files (@pxref{Agenda Views}) into a single buffer. @xref{Global TODO list}, for more information. @item S-M-@key{RET} Insert a new TODO entry below the current one. @end table @noindent Changing a TODO state can also trigger tag changes. See the docstring of the option @code{org-todo-state-tags-triggers} for details. @node Multi-state workflows, Progress logging, Using TODO states, TODO Items @section Multi-state workflows You can use TODO keywords to indicate @emph{sequential} working progress states: @smalllisp (setq org-todo-keywords '((sequence "TODO" "FEEDBACK" "VERIFY" "|" "DONE" "DELEGATED"))) @end smalllisp The vertical bar separates the TODO keywords (states that @emph{need action}) from the DONE states (which need @emph{no further action}). If you don't provide the separator bar, the last state is used as the DONE state. With this setup, the command @kbd{C-c C-t} will cycle an entry from TODO to FEEDBACK, then to VERIFY, and finally to DONE and DELEGATED. Sometimes you may want to use different sets of TODO keywords in parallel. For example, you may want to have the basic @code{TODO}/@code{DONE}, but also a workflow for bug fixing. Your setup would then look like this: @smalllisp (setq org-todo-keywords '((sequence "TODO(t)" "|" "DONE(d)") (sequence "REPORT(r)" "BUG(b)" "KNOWNCAUSE(k)" "|" "FIXED(f)"))) @end smalllisp The keywords should all be different, this helps Org mode to keep track of which subsequence should be used for a given entry. The example also shows how to define keys for fast access of a particular state, by adding a letter in parenthesis after each keyword---you will be prompted for the key after @kbd{C-c C-t}. To define TODO keywords that are valid only in a single file, use the following text anywhere in the file. @smallexample #+TODO: TODO(t) | DONE(d) #+TODO: REPORT(r) BUG(b) KNOWNCAUSE(k) | FIXED(f) #+TODO: | CANCELED(c) @end smallexample After changing one of these lines, use @kbd{C-c C-c} with the cursor still in the line to make the changes known to Org mode. @node Progress logging, Priorities, Multi-state workflows, TODO Items @section Progress logging Org mode can automatically record a timestamp and possibly a note when you mark a TODO item as DONE, or even each time you change the state of a TODO item. This system is highly configurable; settings can be on a per-keyword basis and can be localized to a file or even a subtree. For information on how to clock working time for a task, see @ref{Clocking work time}. @menu * Closing items:: When was this entry marked DONE? * Tracking TODO state changes:: When did the status change? @end menu @node Closing items, Tracking TODO state changes, Progress logging, Progress logging @unnumberedsubsec Closing items The most basic logging is to keep track of @emph{when} a certain TODO item was finished. This is achieved with@footnote{The corresponding in-buffer setting is: @code{#+STARTUP: logdone}}. @smalllisp (setq org-log-done 'time) @end smalllisp @noindent Then each time you turn an entry from a TODO (not-done) state into any of the DONE states, a line @samp{CLOSED: [timestamp]} will be inserted just after the headline. If you want to record a note along with the timestamp, use@footnote{The corresponding in-buffer setting is: @code{#+STARTUP: lognotedone}} @smalllisp (setq org-log-done 'note) @end smalllisp @noindent You will then be prompted for a note, and that note will be stored below the entry with a @samp{Closing Note} heading. @node Tracking TODO state changes, , Closing items, Progress logging @unnumberedsubsec Tracking TODO state changes You might want to keep track of TODO state changes. You can either record just a timestamp, or a time-stamped note for a change. These records will be inserted after the headline as an itemized list. When taking a lot of notes, you might want to get the notes out of the way into a drawer. Customize the variable @code{org-log-into-drawer} to get this behavior. For state logging, Org mode expects configuration on a per-keyword basis. This is achieved by adding special markers @samp{!} (for a timestamp) and @samp{@@} (for a note) in parentheses after each keyword. For example: @smallexample #+TODO: TODO(t) WAIT(w@@/!) | DONE(d!) CANCELED(c@@) @end smallexample @noindent will define TODO keywords and fast access keys, and also request that a time is recorded when the entry is set to DONE, and that a note is recorded when switching to WAIT or CANCELED. The same syntax works also when setting @code{org-todo-keywords}. @node Priorities, Breaking down tasks, Progress logging, TODO Items @section Priorities If you use Org mode extensively, you may end up with enough TODO items that it starts to make sense to prioritize them. Prioritizing can be done by placing a @emph{priority cookie} into the headline of a TODO item, like this @smallexample *** TODO [#A] Write letter to Sam Fortune @end smallexample @noindent Org mode supports three priorities: @samp{A}, @samp{B}, and @samp{C}. @samp{A} is the highest, @samp{B} the default if none is given. Priorities make a difference only in the agenda. @table @kbd @item @kbd{C-c ,} Set the priority of the current headline. Press @samp{A}, @samp{B} or @samp{C} to select a priority, or @key{SPC} to remove the cookie. @c @item S-@key{up}/@key{dwn} Increase/decrease priority of current headline @end table @node Breaking down tasks, Checkboxes, Priorities, TODO Items @section Breaking tasks down into subtasks It is often advisable to break down large tasks into smaller, manageable subtasks. You can do this by creating an outline tree below a TODO item, with detailed subtasks on the tree. To keep the overview over the fraction of subtasks that are already completed, insert either @samp{[/]} or @samp{[%]} anywhere in the headline. These cookies will be updated each time the TODO status of a child changes, or when pressing @kbd{C-c C-c} on the cookie. For example: @smallexample * Organize Party [33%] ** TODO Call people [1/2] *** TODO Peter *** DONE Sarah ** TODO Buy food ** DONE Talk to neighbor @end smallexample @node Checkboxes, , Breaking down tasks, TODO Items @section Checkboxes Every item in a plain list (@pxref{Plain lists}) can be made into a checkbox by starting it with the string @samp{[ ]}. Checkboxes are not included in the global TODO list, so they are often great to split a task into a number of simple steps. Here is an example of a checkbox list. @smallexample * TODO Organize party [1/3] - [-] call people [1/2] - [ ] Peter - [X] Sarah - [X] order food @end smallexample Checkboxes work hierarchically, so if a checkbox item has children that are checkboxes, toggling one of the children checkboxes will make the parent checkbox reflect if none, some, or all of the children are checked. @noindent The following commands work with checkboxes: @table @kbd @item C-c C-c Toggle checkbox status or (with prefix arg) checkbox presence at point. @item M-S-@key{RET} Insert a new item with a checkbox. This works only if the cursor is already in a plain list item (@pxref{Plain lists}). @end table @seealso{ @uref{http://orgmode.org/manual/TODO-Items.html#TODO-Items, Chapter 5 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/orgtutorial_dto.php, David O'Toole's introductory tutorial}@* @uref{http://members.optusnet.com.au/~charles57/GTD/gtd_workflow.html, Charles Cave's GTD setup}} @node Tags, Properties, TODO Items, Top @chapter Tags An excellent way to implement labels and contexts for cross-correlating information is to assign @i{tags} to headlines. Org mode has extensive support for tags. Every headline can contain a list of tags; they occur at the end of the headline. Tags are normal words containing letters, numbers, @samp{_}, and @samp{@@}. Tags must be preceded and followed by a single colon, e.g., @samp{:work:}. Several tags can be specified, as in @samp{:work:urgent:}. Tags will by default be in bold face with the same color as the headline. @menu * Tag inheritance:: Tags use the tree structure of the outline * Setting tags:: How to assign tags to a headline * Tag groups:: Use one tag to search for several tags * Tag searches:: Searching for combinations of tags @end menu @node Tag inheritance, Setting tags, Tags, Tags @section Tag inheritance @i{Tags} make use of the hierarchical structure of outline trees. If a heading has a certain tag, all subheadings will inherit the tag as well. For example, in the list @smallexample * Meeting with the French group :work: ** Summary by Frank :boss:notes: *** TODO Prepare slides for him :action: @end smallexample @noindent the final heading will have the tags @samp{:work:}, @samp{:boss:}, @samp{:notes:}, and @samp{:action:} even though the final heading is not explicitly marked with those tags. You can also set tags that all entries in a file should inherit just as if these tags were defined in a hypothetical level zero that surrounds the entire file. Use a line like this@footnote{As with all these in-buffer settings, pressing @kbd{C-c C-c} activates any changes in the line.}: @smallexample #+FILETAGS: :Peter:Boss:Secret: @end smallexample @node Setting tags, Tag groups, Tag inheritance, Tags @section Setting tags Tags can simply be typed into the buffer at the end of a headline. After a colon, @kbd{M-@key{TAB}} offers completion on tags. There is also a special command for inserting tags: @table @kbd @item C-c C-q Enter new tags for the current headline. Org mode will either offer completion or a special single-key interface for setting tags, see below. After pressing @key{RET}, the tags will be inserted and aligned to @code{org-tags-column}. When called with a @kbd{C-u} prefix, all tags in the current buffer will be aligned to that column, just to make things look nice. @item C-c C-c When the cursor is in a headline, this does the same as @kbd{C-c C-q}. @end table Org will support tag insertion based on a @emph{list of tags}. By default this list is constructed dynamically, containing all tags currently used in the buffer. You may also globally specify a hard list of tags with the variable @code{org-tag-alist}. Finally you can set the default tags for a given file with lines like @smallexample #+TAGS: @@work @@home @@tennisclub #+TAGS: laptop car pc sailboat @end smallexample By default Org mode uses the standard minibuffer completion facilities for entering tags. However, it also implements another, quicker, tag selection method called @emph{fast tag selection}. This allows you to select and deselect tags with just a single key press. For this to work well you should assign unique letters to most of your commonly used tags. You can do this globally by configuring the variable @code{org-tag-alist} in your @file{.emacs} file. For example, you may find the need to tag many items in different files with @samp{:@@home:}. In this case you can set something like: @smalllisp (setq org-tag-alist '(("@@work" . ?w) ("@@home" . ?h) ("laptop" . ?l))) @end smalllisp @noindent If the tag is only relevant to the file you are working on, then you can instead set the TAGS option line as: @smallexample #+TAGS: @@work(w) @@home(h) @@tennisclub(t) laptop(l) pc(p) @end smallexample @node Tag groups, Tag searches, Setting tags, Tags @section Tag groups @cindex group tags @cindex tags, groups In a set of mutually exclusive tags, the first tag can be defined as a @emph{group tag}. When you search for a group tag, it will return matches for all members in the group. In an agenda view, filtering by a group tag will display headlines tagged with at least one of the members of the group. This makes tag searches and filters even more flexible. You can set group tags by inserting a colon between the group tag and other tags, like this: @example #+TAGS: @{ @@read : @@read_book @@read_ebook @} @end example In this example, @samp{@@read} is a @emph{group tag} for a set of three tags: @samp{@@read}, @samp{@@read_book} and @samp{@@read_ebook}. You can also use the @code{:grouptags} keyword directly when setting @var{org-tag-alist}, see the documentation of that variable. @kindex C-c C-x q @vindex org-group-tags If you want to ignore group tags temporarily, toggle group tags support with @command{org-toggle-tags-groups}, bound to @kbd{C-c C-x q}. If you want to disable tag groups completely, set @var{org-group-tags} to nil. @node Tag searches, , Tag groups, Tags @section Tag searches Once a system of tags has been set up, it can be used to collect related information into special lists. @table @kbd @item C-c \ @itemx C-c / m Create a sparse tree with all headlines matching a tags search. With a @kbd{C-u} prefix argument, ignore headlines that are not a TODO line. @item C-c a m Create a global list of tag matches from all agenda files. @xref{Matching tags and properties}. @item C-c a M Create a global list of tag matches from all agenda files, but check only TODO items and force checking subitems (see variable @code{org-tags-match-list-sublevels}). @end table These commands all prompt for a match string which allows basic Boolean logic like @samp{+boss+urgent-project1}, to find entries with tags @samp{boss} and @samp{urgent}, but not @samp{project1}, or @samp{Kathy|Sally} to find entries which are tagged, like @samp{Kathy} or @samp{Sally}. The full syntax of the search string is rich and allows also matching against TODO keywords, entry levels and properties. For a complete description with many examples, see @ref{Matching tags and properties}. @seealso{ @uref{http://orgmode.org/manual/Tags.html#Tags, Chapter 6 of the manual}@* @uref{http://sachachua.com/wp/2008/01/tagging-in-org-plus-bonus-code-for-timeclocks-and-tags/, Sacha Chua's article about tagging in Org-mode}} @node Properties, Dates and Times, Tags, Top @chapter Properties Properties are key-value pairs associated with an entry. They live in a special drawer with the name @code{PROPERTIES}. Each property is specified on a single line, with the key (surrounded by colons) first, and the value after it: @smallexample * CD collection ** Classic *** Goldberg Variations :PROPERTIES: :Title: Goldberg Variations :Composer: J.S. Bach :Publisher: Deutsche Grammophon :NDisks: 1 :END: @end smallexample You may define the allowed values for a particular property @samp{:Xyz:} by setting a property @samp{:Xyz_ALL:}. This special property is @emph{inherited}, so if you set it in a level 1 entry, it will apply to the entire tree. When allowed values are defined, setting the corresponding property becomes easier and is less prone to typing errors. For the example with the CD collection, we can predefine publishers and the number of disks in a box like this: @smallexample * CD collection :PROPERTIES: :NDisks_ALL: 1 2 3 4 :Publisher_ALL: "Deutsche Grammophon" Philips EMI :END: @end smallexample or globally using @code{org-global-properties}, or file-wide like this: @smallexample #+PROPERTY: NDisks_ALL 1 2 3 4 @end smallexample @table @kbd @item C-c C-x p Set a property. This prompts for a property name and a value. @item C-c C-c d Remove a property from the current entry. @end table To create sparse trees and special lists with selection based on properties, the same commands are used as for tag searches (@pxref{Tag searches}). The syntax for the search string is described in @ref{Matching tags and properties}. @table @kbd @end table @seealso{ @uref{http://orgmode.org/manual/Properties-and-Columns.html#Properties-and-Columns, Chapter 7 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/org-column-view-tutorial.php,Bastien Guerry's column view tutorial}} @node Dates and Times, Capture - Refile - Archive, Properties, Top @chapter Dates and Times To assist project planning, TODO items can be labeled with a date and/or a time. The specially formatted string carrying the date and time information is called a @emph{timestamp} in Org mode. @menu * Timestamps:: Assigning a time to a tree entry * Creating timestamps:: Commands which insert timestamps * Deadlines and scheduling:: Planning your work * Clocking work time:: Tracking how long you spend on a task @end menu @node Timestamps, Creating timestamps, Dates and Times, Dates and Times @section Timestamps A timestamp is a specification of a date (possibly with a time or a range of times) in a special format, either @samp{<2003-09-16 Tue>} or @samp{<2003-09-16 Tue 09:39>} or @samp{<2003-09-16 Tue 12:00-12:30>}. A timestamp can appear anywhere in the headline or body of an Org tree entry. Its presence causes entries to be shown on specific dates in the agenda (@pxref{Weekly/daily agenda}). We distinguish: @noindent @b{Plain timestamp; Event; Appointment}@* A simple timestamp just assigns a date/time to an item. This is just like writing down an appointment or event in a paper agenda. @smallexample * Meet Peter at the movies <2006-11-01 Wed 19:15> * Discussion on climate change <2006-11-02 Thu 20:00-22:00> @end smallexample @noindent @b{Timestamp with repeater interval}@* A timestamp may contain a @emph{repeater interval}, indicating that it applies not only on the given date, but again and again after a certain interval of N days (d), weeks (w), months (m), or years (y). The following will show up in the agenda every Wednesday: @smallexample * Pick up Sam at school <2007-05-16 Wed 12:30 +1w> @end smallexample @noindent @b{Diary-style sexp entries}@* For more complex date specifications, Org mode supports using the special sexp diary entries implemented in the Emacs calendar/diary package. For example @smallexample * The nerd meeting on every 2nd Thursday of the month <%%(diary-float t 4 2)> @end smallexample @noindent @b{Time/Date range}@* Two timestamps connected by @samp{--} denote a range. @smallexample ** Meeting in Amsterdam <2004-08-23 Mon>--<2004-08-26 Thu> @end smallexample @noindent @b{Inactive timestamp}@* Just like a plain timestamp, but with square brackets instead of angular ones. These timestamps are inactive in the sense that they do @emph{not} trigger an entry to show up in the agenda. @smallexample * Gillian comes late for the fifth time [2006-11-01 Wed] @end smallexample @node Creating timestamps, Deadlines and scheduling, Timestamps, Dates and Times @section Creating timestamps For Org mode to recognize timestamps, they need to be in the specific format. All commands listed below produce timestamps in the correct format. @table @kbd @item C-c . Prompt for a date and insert a corresponding timestamp. When the cursor is at an existing timestamp in the buffer, the command is used to modify this timestamp instead of inserting a new one. When this command is used twice in succession, a time range is inserted. With a prefix, also add the current time. @c @item C-c ! Like @kbd{C-c .}, but insert an inactive timestamp that will not cause an agenda entry. @c @item S-@key{left}@r{/}@key{right} Change date at cursor by one day. @c @item S-@key{up}@r{/}@key{down} Change the item under the cursor in a timestamp. The cursor can be on a year, month, day, hour or minute. When the timestamp contains a time range like @samp{15:30-16:30}, modifying the first time will also shift the second, shifting the time block with constant length. To change the length, modify the second time. @end table When Org mode prompts for a date/time, it will accept any string containing some date and/or time information, and intelligently interpret the string, deriving defaults for unspecified information from the current date and time. You can also select a date in the pop-up calendar. See the manual for more information on how exactly the date/time prompt works. @node Deadlines and scheduling, Clocking work time, Creating timestamps, Dates and Times @section Deadlines and scheduling A timestamp may be preceded by special keywords to facilitate planning: @noindent @b{DEADLINE}@* Meaning: the task (most likely a TODO item, though not necessarily) is supposed to be finished on that date. @table @kbd @item C-c C-d Insert @samp{DEADLINE} keyword along with a stamp, in the line following the headline. @end table On the deadline date, the task will be listed in the agenda. In addition, the agenda for @emph{today} will carry a warning about the approaching or missed deadline, starting @code{org-deadline-warning-days} before the due date, and continuing until the entry is marked DONE. An example: @smallexample *** TODO write article about the Earth for the Guide The editor in charge is [[bbdb:Ford Prefect]] DEADLINE: <2004-02-29 Sun> @end smallexample @noindent @b{SCHEDULED}@* Meaning: you are @i{planning to start working} on that task on the given date@footnote{This is quite different from what is normally understood by @i{scheduling a meeting}, which is done in Org-mode by just inserting a time stamp without keyword.}. @table @kbd @item C-c C-s Insert @samp{SCHEDULED} keyword along with a stamp, in the line following the headline. @end table The headline will be listed under the given date@footnote{It will still be listed on that date after it has been marked DONE. If you don't like this, set the variable @code{org-agenda-skip-scheduled-if-done}.}. In addition, a reminder that the scheduled date has passed will be present in the compilation for @emph{today}, until the entry is marked DONE. I.e.@: the task will automatically be forwarded until completed. @smallexample *** TODO Call Trillian for a date on New Years Eve. SCHEDULED: <2004-12-25 Sat> @end smallexample Some tasks need to be repeated again and again. Org mode helps to organize such tasks using a so-called repeater in a DEADLINE, SCHEDULED, or plain timestamp. In the following example @smallexample ** TODO Pay the rent DEADLINE: <2005-10-01 Sat +1m> @end smallexample @noindent the @code{+1m} is a repeater; the intended interpretation is that the task has a deadline on <2005-10-01> and repeats itself every (one) month starting from that time. @node Clocking work time, , Deadlines and scheduling, Dates and Times @section Clocking work time Org mode allows you to clock the time you spend on specific tasks in a project. @table @kbd @item C-c C-x C-i Start the clock on the current item (clock-in). This inserts the CLOCK keyword together with a timestamp. When called with a @kbd{C-u} prefix argument, select the task from a list of recently clocked tasks. @c @item C-c C-x C-o Stop the clock (clock-out). This inserts another timestamp at the same location where the clock was last started. It also directly computes the resulting time in inserts it after the time range as @samp{=> HH:MM}. @item C-c C-x C-e Update the effort estimate for the current clock task. @item C-c C-x C-q Cancel the current clock. This is useful if a clock was started by mistake, or if you ended up working on something else. @item C-c C-x C-j Jump to the entry that contains the currently running clock. With a @kbd{C-u} prefix arg, select the target task from a list of recently clocked tasks. @item C-c C-x C-r Insert a dynamic block containing a clock report as an Org-mode table into the current file. When the cursor is at an existing clock table, just update it. @smallexample #+BEGIN: clocktable :maxlevel 2 :emphasize nil :scope file #+END: clocktable @end smallexample @noindent For details about how to customize this view, see @uref{http://orgmode.org/manual/Clocking-work-time.html#Clocking-work-time,the manual}. @item C-c C-c Update dynamic block at point. The cursor needs to be in the @code{#+BEGIN} line of the dynamic block. @end table The @kbd{l} key may be used in the timeline (@pxref{Timeline}) and in the agenda (@pxref{Weekly/daily agenda}) to show which tasks have been worked on or closed during a day. @seealso{ @uref{http://orgmode.org/manual/Dates-and-Times.html#Dates-and-Times, Chapter 8 of the manual}@* @uref{http://members.optusnet.com.au/~charles57/GTD/org_dates/, Charles Cave's Date and Time tutorial}@* @uref{http://doc.norang.ca/org-mode.html#Clocking, Bernt Hansen's clocking workflow}} @node Capture - Refile - Archive, Agenda Views, Dates and Times, Top @chapter Capture - Refile - Archive An important part of any organization system is the ability to quickly capture new ideas and tasks, and to associate reference material with them. Org defines a capture process to create tasks. Once in the system, tasks and projects need to be moved around. Moving completed project trees to an archive file keeps the system compact and fast. @menu * Capture:: Capturing new stuff * Refile and copy:: Moving a tree from one place to another * Archiving:: What to do with finished projects @end menu @node Capture, Refile and copy, Capture - Refile - Archive, Capture - Refile - Archive @section Capture Org's lets you store quick notes with little interruption of your work flow. You can define templates for new entries and associate them with different targets for storing notes. @menu * Setting up a capture location:: Where notes will be stored * Using capture:: Commands to invoke and terminate capture * Capture templates:: Define the outline of different note types @end menu @node Setting up a capture location, Using capture, Capture, Capture @unnumberedsubsec Setting up a capture location The following customization sets a default target@footnote{Using capture templates, you get finer control over capture locations, see @ref{Capture templates}.} file for notes, and defines a global key for capturing new stuff. @example (setq org-default-notes-file (concat org-directory "/notes.org")) (define-key global-map "\C-cc" 'org-capture) @end example @node Using capture, Capture templates, Setting up a capture location, Capture @unnumberedsubsec Using capture @table @kbd @item C-c c Start a capture process, placing you into a narrowed indirect buffer to edit. @item C-c C-c Once you are done entering information into the capture buffer, @kbd{C-c C-c} will return you to the window configuration before the capture process, so that you can resume your work without further distraction. @item C-c C-w Finalize by moving the entry to a refile location (see section 9.2). @item C-c C-k Abort the capture process and return to the previous state. @end table @node Capture templates, , Using capture, Capture @unnumberedsubsec Capture templates You can use templates to generate different types of capture notes, and to store them in different places. For example, if you would like to store new tasks under a heading @samp{Tasks} in file @file{TODO.org}, and journal entries in a date tree in @file{journal.org} you could use: @smallexample (setq org-capture-templates '(("t" "Todo" entry (file+headline "~/org/gtd.org" "Tasks") "* TODO %?\n %i\n %a") ("j" "Journal" entry (file+datetree "~/org/journal.org") "* %?\nEntered on %U\n %i\n %a"))) @end smallexample @noindent In these entries, the first string is the key to reach the template, the second is a short description. Then follows the type of the entry and a definition of the target location for storing the note. Finally, the template itself, a string with %-escapes to fill in information based on time and context. When you call @kbd{M-x org-capture}, Org will prompt for a key to select the template (if you have more than one template) and then prepare the buffer like @smallexample * TODO [[file:@var{link to where you were when initiating capture}]] @end smallexample @noindent During expansion of the template, special @kbd{%}-escapes@footnote{If you need one of these sequences literally, escape the @kbd{%} with a backslash.} allow dynamic insertion of content. Here is a small selection of the possibilities, consult the manual for more. @smallexample %a @r{annotation, normally the link created with @code{org-store-link}} %i @r{initial content, the region when capture is called with C-u.} %t, %T @r{timestamp, date only, or date and time} %u, %U @r{like above, but inactive timestamps} @end smallexample @node Refile and copy, Archiving, Capture, Capture - Refile - Archive @section Refile and copy When reviewing the captured data, you may want to refile or copy some of the entries into a different list, for example into a project. Cutting, finding the right location, and then pasting the note is cumbersome. To simplify this process, use the following commands: @table @kbd @item C-c M-x Copy the entry or region at point. This command behaves like @code{org-refile}, except that the original note will not be deleted. @item C-c C-w Refile the entry or region at point. This command offers possible locations for refiling the entry and lets you select one with completion. The item (or all items in the region) is filed below the target heading as a subitem.@* By default, all level 1 headlines in the current buffer are considered to be targets, but you can have more complex definitions across a number of files. See the variable @code{org-refile-targets} for details. @item C-u C-c C-w Use the refile interface to jump to a heading. @item C-u C-u C-c C-w Jump to the location where @code{org-refile} last moved a tree to. @end table @node Archiving, , Refile and copy, Capture - Refile - Archive @section Archiving When a project represented by a (sub)tree is finished, you may want to move the tree out of the way and to stop it from contributing to the agenda. Archiving is important to keep your working files compact and global searches like the construction of agenda views fast. The most common archiving action is to move a project tree to another file, the archive file. @table @kbd @item C-c C-x C-a Archive the current entry using @code{org-archive-default-command}. @item C-c C-x C-s@ @r{or short} @ C-c $ Archive the subtree starting at the cursor position to the location given by @code{org-archive-location}. @end table The default archive location is a file in the same directory as the current file, with the name derived by appending @file{_archive} to the current file name. For information and examples on how to change this, see the documentation string of the variable @code{org-archive-location}. There is also an in-buffer option for setting this variable, for example @smallexample #+ARCHIVE: %s_done:: @end smallexample @seealso{ @uref{http://orgmode.org/manual/Capture-_002d-Refile-_002d-Archive.html#Capture-_002d-Refile-_002d-Archive, Chapter 9 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/org-protocol-custom-handler.php, Sebastian Rose's tutorial for capturing from a web browser}}@uref{}@* @node Agenda Views, Markup, Capture - Refile - Archive, Top @chapter Agenda Views Due to the way Org works, TODO items, time-stamped items, and tagged headlines can be scattered throughout a file or even a number of files. To get an overview of open action items, or of events that are important for a particular date, this information must be collected, sorted and displayed in an organized way. There are several different views, see below. The extracted information is displayed in a special @emph{agenda buffer}. This buffer is read-only, but provides commands to visit the corresponding locations in the original Org files, and even to edit these files remotely. Remote editing from the agenda buffer means, for example, that you can change the dates of deadlines and appointments from the agenda buffer. The commands available in the Agenda buffer are listed in @ref{Agenda commands}. @menu * Agenda files:: Files being searched for agenda information * Agenda dispatcher:: Keyboard access to agenda views * Built-in agenda views:: What is available out of the box? * Agenda commands:: Remote editing of Org trees * Custom agenda views:: Defining special searches and views @end menu @node Agenda files, Agenda dispatcher, Agenda Views, Agenda Views @section Agenda files The information to be shown is normally collected from all @emph{agenda files}, the files listed in the variable @code{org-agenda-files}. @table @kbd @item C-c [ Add current file to the list of agenda files. The file is added to the front of the list. If it was already in the list, it is moved to the front. With a prefix argument, file is added/moved to the end. @item C-c ] Remove current file from the list of agenda files. @item C-, Cycle through agenda file list, visiting one file after the other. @end table @node Agenda dispatcher, Built-in agenda views, Agenda files, Agenda Views @section The agenda dispatcher The views are created through a dispatcher, which should be bound to a global key---for example @kbd{C-c a} (@pxref{Installation}). After pressing @kbd{C-c a}, an additional letter is required to execute a command: @table @kbd @item a The calendar-like agenda (@pxref{Weekly/daily agenda}). @item t @r{/} T A list of all TODO items (@pxref{Global TODO list}). @item m @r{/} M A list of headlines matching a TAGS expression (@pxref{Matching tags and properties}). @item L The timeline view for the current buffer (@pxref{Timeline}). @item s A list of entries selected by a boolean expression of keywords and/or regular expressions that must or must not occur in the entry. @end table @node Built-in agenda views, Agenda commands, Agenda dispatcher, Agenda Views @section The built-in agenda views @menu * Weekly/daily agenda:: The calendar page with current tasks * Global TODO list:: All unfinished action items * Matching tags and properties:: Structured information with fine-tuned search * Timeline:: Time-sorted view for single file * Search view:: Find entries by searching for text @end menu @node Weekly/daily agenda, Global TODO list, Built-in agenda views, Built-in agenda views @subsection The weekly/daily agenda The purpose of the weekly/daily @emph{agenda} is to act like a page of a paper agenda, showing all the tasks for the current week or day. @table @kbd @item C-c a a Compile an agenda for the current week from a list of Org files. The agenda shows the entries for each day. @end table Emacs contains the calendar and diary by Edward M. Reingold. Org-mode understands the syntax of the diary and allows you to use diary sexp entries directly in Org files: @smallexample * Birthdays and similar stuff #+CATEGORY: Holiday %%(org-calendar-holiday) ; special function for holiday names #+CATEGORY: Ann %%(diary-anniversary 5 14 1956)@footnote{Note that the order of the arguments (month, day, year) depends on the setting of @code{calendar-date-style}.} Arthur Dent is %d years old %%(diary-anniversary 10 2 1869) Mahatma Gandhi would be %d years old @end smallexample Org can interact with Emacs appointments notification facility. To add all the appointments of your agenda files, use the command @code{org-agenda-to-appt}. See the docstring for details. @node Global TODO list, Matching tags and properties, Weekly/daily agenda, Built-in agenda views @subsection The global TODO list The global TODO list contains all unfinished TODO items formatted and collected into a single place. Remote editing of TODO items lets you can change the state of a TODO entry with a single key press. The commands available in the TODO list are described in @ref{Agenda commands}. @table @kbd @item C-c a t Show the global TODO list. This collects the TODO items from all agenda files (@pxref{Agenda Views}) into a single buffer. @item C-c a T Like the above, but allows selection of a specific TODO keyword. @end table @node Matching tags and properties, Timeline, Global TODO list, Built-in agenda views @subsection Matching tags and properties If headlines in the agenda files are marked with @emph{tags} (@pxref{Tags}), or have properties (@pxref{Properties}), you can select headlines based on this metadata and collect them into an agenda buffer. The match syntax described here also applies when creating sparse trees with @kbd{C-c / m}. The commands available in the tags list are described in @ref{Agenda commands}. @table @kbd @item C-c a m Produce a list of all headlines that match a given set of tags. The command prompts for a selection criterion, which is a boolean logic expression with tags, like @samp{+work+urgent-withboss} or @samp{work|home} (@pxref{Tags}). If you often need a specific search, define a custom command for it (@pxref{Agenda dispatcher}). @item C-c a M Like @kbd{C-c a m}, but only select headlines that are also TODO items. @end table @subsubheading Match syntax A search string can use Boolean operators @samp{&} for AND and @samp{|} for OR. @samp{&} binds more strongly than @samp{|}. Parentheses are currently not implemented. Each element in the search is either a tag, a regular expression matching tags, or an expression like @code{PROPERTY OPERATOR VALUE} with a comparison operator, accessing a property value. Each element may be preceded by @samp{-}, to select against it, and @samp{+} is syntactic sugar for positive selection. The AND operator @samp{&} is optional when @samp{+} or @samp{-} is present. Here are some examples, using only tags. @table @samp @item +work-boss Select headlines tagged @samp{:work:}, but discard those also tagged @samp{:boss:}. @item work|laptop Selects lines tagged @samp{:work:} or @samp{:laptop:}. @item work|laptop+night Like before, but require the @samp{:laptop:} lines to be tagged also @samp{:night:}. @end table You may also test for properties at the same time as matching tags, see the manual for more information. @node Timeline, Search view, Matching tags and properties, Built-in agenda views @subsection Timeline for a single file The timeline summarizes all time-stamped items from a single Org mode file in a @emph{time-sorted view}. The main purpose of this command is to give an overview over events in a project. @table @kbd @item C-c a L Show a time-sorted view of the Org file, with all time-stamped items. When called with a @kbd{C-u} prefix, all unfinished TODO entries (scheduled or not) are also listed under the current date. @end table @node Search view, , Timeline, Built-in agenda views @subsection Search view This agenda view is a general text search facility for Org mode entries. It is particularly useful to find notes. @table @kbd @item C-c a s This is a special search that lets you select entries by matching a substring or specific words using a boolean logic. @end table For example, the search string @samp{computer equipment} will find entries that contain @samp{computer equipment} as a substring. Search view can also search for specific keywords in the entry, using Boolean logic. The search string @samp{+computer +wifi -ethernet -@{8\.11[bg]@}} will search for note entries that contain the keywords @code{computer} and @code{wifi}, but not the keyword @code{ethernet}, and which are also not matched by the regular expression @code{8\.11[bg]}, meaning to exclude both 8.11b and 8.11g. Note that in addition to the agenda files, this command will also search the files listed in @code{org-agenda-text-search-extra-files}. @node Agenda commands, Custom agenda views, Built-in agenda views, Agenda Views @section Commands in the agenda buffer Entries in the agenda buffer are linked back to the Org file or diary file where they originate. Commands are provided to show and jump to the original entry location, and to edit the Org files ``remotely'' from the agenda buffer. This is just a selection of the many commands, explore the @code{Agenda} menu and the manual for a complete list. @table @kbd @tsubheading{Motion} @item n Next line (same as @key{up} and @kbd{C-p}). @item p Previous line (same as @key{down} and @kbd{C-n}). @tsubheading{View/Go to Org file} @item mouse-3 @itemx @key{SPC} Display the original location of the item in another window. With prefix arg, make sure that the entire entry is made visible in the outline, not only the heading. @c @itemx @key{TAB} Go to the original location of the item in another window. Under Emacs 22, @kbd{mouse-1} will also work for this. @c @itemx @key{RET} Go to the original location of the item and delete other windows. @c @tsubheading{Change display} @item o Delete other windows. @c @item d @r{/} w Switch to day/week view. @c @item f @r{and} b Go forward/backward in time to display the following @code{org-agenda-current-span} days. For example, if the display covers a week, switch to the following/previous week. @c @item . Go to today. @c @item j Prompt for a date and go there. @c @item v l @ @r{or short} @ l Toggle Logbook mode. In Logbook mode, entries that were marked DONE while logging was on (variable @code{org-log-done}) are shown in the agenda, as are entries that have been clocked on that day. When called with a @kbd{C-u} prefix, show all possible logbook entries, including state changes. @c @item r @r{or} g Recreate the agenda buffer, to reflect the changes. @item s Save all Org buffers in the current Emacs session, and also the locations of IDs. @tsubheading{Secondary filtering and query editing} @item / Filter the current agenda view with respect to a tag. You are prompted for a letter to select a tag. Press @samp{-} first to select against the tag. @item \ Narrow the current agenda filter by an additional condition. @tsubheading{Remote editing (see the manual for many more commands)} @item 0--9 Digit argument. @c @item t Change the TODO state of the item, in the agenda and in the org file. @c @item C-k Delete the current agenda item along with the entire subtree belonging to it in the original Org file. @c @item C-c C-w Refile the entry at point. @c @item C-c C-x C-a @ @r{or short} @ a Archive the subtree corresponding to the entry at point using the default archiving command set in @code{org-archive-default-command}. @c @item C-c C-x C-s @ @r{or short} @ $ Archive the subtree corresponding to the current headline. @c @item C-c C-s Schedule this item, with prefix arg remove the scheduling timestamp @c @item C-c C-d Set a deadline for this item, with prefix arg remove the deadline. @c @item S-@key{right} @r{and} S-@key{left} Change the timestamp associated with the current line by one day. @c @item I Start the clock on the current item. @c @item O / X Stop/cancel the previously started clock. @item J Jump to the running clock in another window. @end table @node Custom agenda views, , Agenda commands, Agenda Views @section Custom agenda views The main application of custom searches is the definition of keyboard shortcuts for frequently used searches, either creating an agenda buffer, or a sparse tree (the latter covering of course only the current buffer). Custom commands are configured in the variable @code{org-agenda-custom-commands}. You can customize this variable, for example by pressing @kbd{C-c a C}. You can also directly set it with Emacs Lisp in @file{.emacs}. The following example contains all valid search types: @smalllisp @group (setq org-agenda-custom-commands '(("w" todo "WAITING") ("u" tags "+boss-urgent") ("v" tags-todo "+boss-urgent"))) @end group @end smalllisp @noindent The initial string in each entry defines the keys you have to press after the dispatcher command @kbd{C-c a} in order to access the command. Usually this will be just a single character. The second parameter is the search type, followed by the string or regular expression to be used for the matching. The example above will therefore define: @table @kbd @item C-c a w as a global search for TODO entries with @samp{WAITING} as the TODO keyword @item C-c a u as a global tags search for headlines marked @samp{:boss:} but not @samp{:urgent:} @item C-c a v as the same search as @kbd{C-c a u}, but limiting the search to headlines that are also TODO items @end table @seealso{ @uref{http://orgmode.org/manual/Agenda-Views.html#Agenda-Views, Chapter 10 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/org-custom-agenda-commands.php, Mat Lundin's tutorial about custom agenda commands}@* @uref{http://www.newartisans.com/2007/08/using-org-mode-as-a-day-planner.html, John Wiegley's setup}} @node Markup, Exporting, Agenda Views, Top @chapter Markup for rich export When exporting Org-mode documents, the exporter tries to reflect the structure of the document as accurately as possible in the backend. Since export targets like HTML, @LaTeX{}, or DocBook allow much richer formatting, Org mode has rules on how to prepare text for rich export. This section summarizes the markup rules used in an Org-mode buffer. @menu * Structural markup elements:: The basic structure as seen by the exporter * Images and tables:: Images, tables and caption mechanism * Literal examples:: Source code examples with special formatting * Include files:: Include additional files into a document * Embedded @LaTeX{}:: @LaTeX{} can be freely used inside Org documents @end menu @node Structural markup elements, Images and tables, Markup, Markup @section Structural markup elements @menu * Document title:: Where the title is taken from * Headings and sections:: The document structure as seen by the exporter * Table of contents:: The if and where of the table of contents * Paragraphs:: Paragraphs * Emphasis and monospace:: Bold, italic, etc. * Comment lines:: What will *not* be exported @end menu @node Document title, Headings and sections, Structural markup elements, Structural markup elements @subheading Document title @noindent The title of the exported document is taken from the special line @smallexample #+TITLE: This is the title of the document @end smallexample @node Headings and sections, Table of contents, Document title, Structural markup elements @subheading Headings and sections The outline structure of the document as described in @ref{Document Structure}, forms the basis for defining sections of the exported document. However, since the outline structure is also used for (for example) lists of tasks, only the first three outline levels will be used as headings. Deeper levels will become itemized lists. You can change the location of this switch globally by setting the variable @code{org-export-headline-levels}, or on a per-file basis with a line @smallexample #+OPTIONS: H:4 @end smallexample @node Table of contents, Paragraphs, Headings and sections, Structural markup elements @subheading Table of contents The table of contents is normally inserted directly before the first headline of the file. @smallexample #+OPTIONS: toc:2 (only to two levels in TOC) #+OPTIONS: toc:nil (no TOC at all) @end smallexample @node Paragraphs, Emphasis and monospace, Table of contents, Structural markup elements @subheading Paragraphs, line breaks, and quoting Paragraphs are separated by at least one empty line. If you need to enforce a line break within a paragraph, use @samp{\\} at the end of a line. To keep the line breaks in a region, but otherwise use normal formatting, you can use this construct, which can also be used to format poetry. @smallexample #+BEGIN_VERSE Great clouds overhead Tiny black birds rise and fall Snow covers Emacs -- AlexSchroeder #+END_VERSE @end smallexample When quoting a passage from another document, it is customary to format this as a paragraph that is indented on both the left and the right margin. You can include quotations in Org-mode documents like this: @smallexample #+BEGIN_QUOTE Everything should be made as simple as possible, but not any simpler -- Albert Einstein #+END_QUOTE @end smallexample If you would like to center some text, do it like this: @smallexample #+BEGIN_CENTER Everything should be made as simple as possible, \\ but not any simpler #+END_CENTER @end smallexample @node Emphasis and monospace, Comment lines, Paragraphs, Structural markup elements @subheading Emphasis and monospace You can make words @b{*bold*}, @i{/italic/}, _underlined_, @code{=code=} and @code{~verbatim~}, and, if you must, @samp{+strike-through+}. Text in the code and verbatim string is not processed for Org-mode specific syntax, it is exported verbatim. To insert a horizontal rules, use a line consisting of only dashes, and at least 5 of them. @node Comment lines, , Emphasis and monospace, Structural markup elements @subheading Comment lines Lines starting with zero or more whitespace characters followed by @samp{#} and a whitespace are treated as comments and, as such, are not exported. Likewise, regions surrounded by @samp{#+BEGIN_COMMENT} ... @samp{#+END_COMMENT} are not exported. Finally, a @samp{COMMENT} keyword at the beginning of an entry, but after any other keyword or priority cookie, comments out the entire subtree. The command below helps changing the comment status of a headline. @table @kbd @item C-c ; Toggle the COMMENT keyword at the beginning of an entry. @end table @node Images and tables, Literal examples, Structural markup elements, Markup @section Images and Tables For Org mode tables, the lines before the first horizontal separator line will become table header lines. You can use the following lines somewhere before the table to assign a caption and a label for cross references, and in the text you can refer to the object with @code{[[tab:basic-data]]}: @smallexample #+CAPTION: This is the caption for the next table (or link) #+NAME: tbl:basic-data | ... | ...| |-----|----| @end smallexample Some backends allow you to directly include images into the exported document. Org does this, if a link to an image files does not have a description part, for example @code{[[./img/a.jpg]]}. If you wish to define a caption for the image and maybe a label for internal cross references, you sure that the link is on a line by itself precede it with: @smallexample #+CAPTION: This is the caption for the next figure link (or table) #+NAME: fig:SED-HR4049 [[./img/a.jpg]] @end smallexample The same caption mechanism applies to other structures than images and tables (e.g., @LaTeX{} equations, source code blocks), provided the chosen export back-end supports them. @node Literal examples, Include files, Images and tables, Markup @section Literal examples You can include literal examples that should not be subjected to markup. Such examples will be typeset in monospace, so this is well suited for source code and similar examples. @smallexample #+BEGIN_EXAMPLE Some example from a text file. #+END_EXAMPLE @end smallexample For simplicity when using small examples, you can also start the example lines with a colon followed by a space. There may also be additional whitespace before the colon: @smallexample Here is an example : Some example from a text file. @end smallexample For source code from a programming language, or any other text that can be marked up by font-lock in Emacs, you can ask for it to look like the fontified Emacs buffer @smallexample #+BEGIN_SRC emacs-lisp (defun org-xor (a b) "Exclusive or." (if a (not b) b)) #+END_SRC @end smallexample To edit the example in a special buffer supporting this language, use @kbd{C-c '} to both enter and leave the editing buffer. @node Include files, Embedded @LaTeX{}, Literal examples, Markup @section Include files During export, you can include the content of another file. For example, to include your @file{.emacs} file, you could use: @smallexample #+INCLUDE: "~/.emacs" src emacs-lisp @end smallexample @noindent The optional second and third parameter are the markup (i.e., @samp{example} or @samp{src}), and, if the markup is @samp{src}, the language for formatting the contents. The markup is optional, if it is not given, the text will be assumed to be in Org mode format and will be processed normally. @kbd{C-c '} will visit the included file. @node Embedded @LaTeX{}, , Include files, Markup @section Embedded @LaTeX{} For scientific notes which need to be able to contain mathematical symbols and the occasional formula, Org-mode supports embedding @LaTeX{} code into its files. You can directly use TeX-like syntax for special symbols, enter formulas and entire @LaTeX{} environments. @smallexample Angles are written as Greek letters \alpha, \beta and \gamma. The mass if the sun is M_sun = 1.989 x 10^30 kg. The radius of the sun is R_@{sun@} = 6.96 x 10^8 m. If $a^2=b$ and $b=2$, then the solution must be either $a=+\sqrt@{2@}$ or $a=-\sqrt@{2@}$. \begin@{equation@} x=\sqrt@{b@} \end@{equation@} @end smallexample @noindent With @uref{http://orgmode.org/manual/LaTeX-fragments.html#LaTeX-fragments,special setup}, @LaTeX{} snippets will be included as images when exporting to HTML. @seealso{ @uref{http://orgmode.org/manual/Markup.html#Markup, Chapter 11 of the manual}} @node Exporting, Publishing, Markup, Top @chapter Exporting Org-mode documents can be exported into a variety of other formats: ASCII export for inclusion into emails, HTML to publish on the web, @LaTeX{}/PDF for beautiful printed documents and DocBook to enter the world of many other formats using DocBook tools. There is also export to iCalendar format so that planning information can be incorporated into desktop calendars. @menu * Export options:: Per-file export settings * The export dispatcher:: How to access exporter commands * ASCII/Latin-1/UTF-8 export:: Exporting to flat files with encoding * HTML export:: Exporting to HTML * @LaTeX{} and PDF export:: Exporting to @LaTeX{}, and processing to PDF * iCalendar export:: Exporting to iCalendar @end menu @node Export options, The export dispatcher, Exporting, Exporting @section Export options The exporter recognizes special lines in the buffer which provide additional information. These lines may be put anywhere in the file. The whole set of lines can be inserted into the buffer with @kbd{C-c C-e #}. @table @kbd @item C-c C-e # Insert template with export options, see example below. @end table @smallexample #+TITLE: the title to be shown #+AUTHOR: the author (default taken from @code{user-full-name}) #+DATE: a date, fixed, or an Org timestamp #+EMAIL: his/her email address (default from @code{user-mail-address}) #+DESCRIPTION: the page description, e.g.@: for the XHTML meta tag #+KEYWORDS: the page keywords, e.g.@: for the XHTML meta tag #+LANGUAGE: language, e.g.@: @samp{en} (@code{org-export-default-language}) #+OPTIONS: H:2 num:t toc:t \n:nil ::t |:t ^:t f:t tex:t ... @end smallexample @node The export dispatcher, ASCII/Latin-1/UTF-8 export, Export options, Exporting @section The export dispatcher All export commands can be reached using the export dispatcher, which is a prefix key that prompts for an additional key specifying the command. Normally the entire file is exported, but if a region is active, it will be exported instead. @table @kbd @item C-c C-e Dispatcher for export and publishing commands. @end table @node ASCII/Latin-1/UTF-8 export, HTML export, The export dispatcher, Exporting @section ASCII/Latin-1/UTF-8 export ASCII export produces a simple and very readable version of an Org-mode file, containing only plain ASCII. Latin-1 and UTF-8 export augment the file with special characters and symbols available in these encodings. @table @kbd @item C-c C-e t a @ @ @r{and} @ @ C-c C-e t A Export as ASCII file or temporary buffer. @item C-c C-e t n @ @ @r{and} @ @ C-c C-e t N Like the above commands, but use Latin-1 encoding. @item C-c C-e t u @ @ @r{and} @ @ C-c C-e t U Like the above commands, but use UTF-8 encoding. @end table @node HTML export, @LaTeX{} and PDF export, ASCII/Latin-1/UTF-8 export, Exporting @section HTML export @table @kbd @item C-c C-e h h Export as HTML file @file{myfile.html}. @item C-c C-e h o Export as HTML file and immediately open it with a browser. @end table To insert HTML that should be copied verbatim to the exported file use either @smallexample #+HTML: Literal HTML code for export @end smallexample @noindent or @smallexample #+BEGIN_HTML All lines between these markers are exported literally #+END_HTML @end smallexample @node @LaTeX{} and PDF export, iCalendar export, HTML export, Exporting @section @LaTeX{} and PDF export @table @kbd @item C-c C-e l l Export as @LaTeX{} file @file{myfile.tex}. @item C-c C-e l p Export as @LaTeX{} and then process to PDF. @item C-c C-e l o Export as @LaTeX{} and then process to PDF, then open the resulting PDF file. @end table By default, the @LaTeX{} output uses the class @code{article}. You can change this by adding an option like @code{#+LATEX_CLASS: myclass} in your file. The class must be listed in @code{org-latex-classes}. Embedded @LaTeX{} as described in @ref{Embedded @LaTeX{}}, will be correctly inserted into the @LaTeX{} file. Similarly to the HTML exporter, you can use @code{#+LATEX:} and @code{#+BEGIN_LATEX ... #+END_LATEX} construct to add verbatim @LaTeX{} code. @node iCalendar export, , @LaTeX{} and PDF export, Exporting @section iCalendar export @table @kbd @item C-c C-e c f Create iCalendar entries for the current file in a @file{.ics} file. @item C-c C-e c c Create a single large iCalendar file from all files in @code{org-agenda-files} and write it to the file given by @code{org-icalendar-combined-agenda-file}. @end table @seealso{ @uref{http://orgmode.org/manual/Exporting.html#Exporting, Chapter 12 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/images-and-xhtml-export.php, Sebastian Rose's image handling tutorial}@* @uref{http://orgmode.org/worg/org-tutorials/org-latex-export.php, Thomas Dye's LaTeX export tutorial} @uref{http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.php, Eric Fraga's BEAMER presentation tutorial}} @node Publishing, Working With Source Code, Exporting, Top @chapter Publishing Org includes a publishing management system that allows you to configure automatic HTML conversion of @emph{projects} composed of interlinked org files. You can also configure Org to automatically upload your exported HTML pages and related attachments, such as images and source code files, to a web server. For detailed instructions about setup, see the manual. Here is an example: @smalllisp (setq org-publish-project-alist '(("org" :base-directory "~/org/" :publishing-directory "~/public_html" :section-numbers nil :table-of-contents nil :style ""))) @end smalllisp @table @kbd @item C-c C-e P x Prompt for a specific project and publish all files that belong to it. @item C-c C-e P p Publish the project containing the current file. @item C-c C-e P f Publish only the current file. @item C-c C-e P a Publish every project. @end table Org uses timestamps to track when a file has changed. The above functions normally only publish changed files. You can override this and force publishing of all files by giving a prefix argument to any of the commands above. @seealso{ @uref{http://orgmode.org/manual/Publishing.html#Publishing, Chapter 13 of the manual}@* @uref{http://orgmode.org/worg/org-tutorials/org-publish-html-tutorial.php, Sebastian Rose's publishing tutorial}@* @uref{http://orgmode.org/worg/org-tutorials/org-jekyll.php, Ian Barton's Jekyll/blogging setup}} @node Working With Source Code, Miscellaneous, Publishing, Top @chapter Working with source code Org-mode provides a number of features for working with source code, including editing of code blocks in their native major-mode, evaluation of code blocks, tangling of code blocks, and exporting code blocks and their results in several formats. @subheading Structure of Code Blocks The structure of code blocks is as follows: @example #+NAME: #+BEGIN_SRC
#+END_SRC @end example Where @code{} is a string used to name the code block, @code{} specifies the language of the code block (e.g.@: @code{emacs-lisp}, @code{shell}, @code{R}, @code{python}, etc...), @code{} can be used to control export of the code block, @code{
} can be used to control many aspects of code block behavior as demonstrated below, and @code{} contains the actual source code. @subheading Editing source code Use @kbd{C-c '} to edit the current code block. This brings up a language major-mode edit buffer containing the body of the code block. Saving this buffer will write the new contents back to the Org buffer. Use @kbd{C-c '} again to exit the edit buffer. @subheading Evaluating code blocks Use @kbd{C-c C-c} to evaluate the current code block and insert its results in the Org-mode buffer. By default, evaluation is only turned on for @code{emacs-lisp} code blocks, however support exists for evaluating blocks in many languages. For a complete list of supported languages see the manual. The following shows a code block and its results. @example #+BEGIN_SRC emacs-lisp (+ 1 2 3 4) #+END_SRC #+RESULTS: : 10 @end example @subheading Extracting source code Use @kbd{C-c C-v t} to create pure source code files by extracting code from source blocks in the current buffer. This is referred to as ``tangling''---a term adopted from the literate programming community. During ``tangling'' of code blocks their bodies are expanded using @code{org-babel-expand-src-block} which can expand both variable and ``noweb'' style references. In order to tangle a code block it must have a @code{:tangle} header argument, see the manual for details. @subheading Library of Babel Use @kbd{C-c C-v l} to load the code blocks from an Org-mode files into the ``Library of Babel'', these blocks can then be evaluated from any Org-mode buffer. A collection of generally useful code blocks is distributed with Org-mode in @code{contrib/library-of-babel.org}. @subheading Header Arguments Many aspects of the evaluation and export of code blocks are controlled through header arguments. These can be specified globally, at the file level, at the outline subtree level, and at the individual code block level. The following describes some of the header arguments. @table @code @item :var The @code{:var} header argument is used to pass arguments to code blocks. The values passed to arguments can be literal values, values from org-mode tables and literal example blocks, or the results of other named code blocks. @item :results The @code{:results} header argument controls the @emph{collection}, @emph{type}, and @emph{handling} of code block results. Values of @code{output} or @code{value} (the default) specify how results are collected from a code block's evaluation. Values of @code{vector}, @code{scalar} @code{file} @code{raw} @code{html} @code{latex} and @code{code} specify the type of the results of the code block which dictates how they will be incorporated into the Org-mode buffer. Values of @code{silent}, @code{replace}, @code{prepend}, and @code{append} specify handling of code block results, specifically if and how the results should be inserted into the Org-mode buffer. @item :session A header argument of @code{:session} will cause the code block to be evaluated in a persistent interactive inferior process in Emacs. This allows for persisting state between code block evaluations, and for manual inspection of the results of evaluation. @item :exports Any combination of the @emph{code} or the @emph{results} of a block can be retained on export, this is specified by setting the @code{:results} header argument to @code{code} @code{results} @code{none} or @code{both}. @item :tangle A header argument of @code{:tangle yes} will cause a code block's contents to be tangled to a file named after the filename of the Org-mode buffer. An alternate file name can be specified with @code{:tangle filename}. @item :cache A header argument of @code{:cache yes} will cause associate a hash of the expanded code block with the results, ensuring that code blocks are only re-run when their inputs have changed. @item :noweb A header argument of @code{:noweb yes} will expand ``noweb'' style references on evaluation and tangling. @item :file Code blocks which output results to files (e.g.@: graphs, diagrams and figures) can accept a @code{:file filename} header argument in which case the results are saved to the named file, and a link to the file is inserted into the Org-mode buffer. @end table @seealso{ @uref{http://orgmode.org/manual/Literal-examples.html#Literal-examples, Chapter 11.3 of the manual}@* @uref{http://orgmode.org/worg/org-contrib/babel/index.php, The Babel site on Worg}} @node Miscellaneous, GNU Free Documentation License, Working With Source Code, Top @chapter Miscellaneous @menu * Completion:: M-TAB knows what you need * Clean view:: Getting rid of leading stars in the outline * MobileOrg:: Org-mode on the iPhone @end menu @node Completion, Clean view, Miscellaneous, Miscellaneous @section Completion Org supports in-buffer completion with @kbd{M-@key{TAB}}. This type of completion does not make use of the minibuffer. You simply type a few letters into the buffer and use the key to complete text right there. For example, this command will complete @TeX{} symbols after @samp{\}, TODO keywords at the beginning of a headline, and tags after @samp{:} in a headline. @node Clean view, MobileOrg, Completion, Miscellaneous @section A cleaner outline view Some people find it noisy and distracting that the Org headlines start with a potentially large number of stars, and that text below the headlines is not indented. While this is no problem when writing a @emph{book-like} document where the outline headings are really section headings, in a more @emph{list-oriented} outline, indented structure is a lot cleaner: @smallexample @group * Top level headline | * Top level headline ** Second level | * Second level *** 3rd level | * 3rd level some text | some text *** 3rd level | * 3rd level more text | more text * Another top level headline | * Another top level headline @end group @end smallexample @noindent If you are using at least Emacs 23.1.50.3 and version 6.29 of Org, this kind of view can be achieved dynamically at display time using @code{org-indent-mode}, which will prepend intangible space to each line. You can turn on @code{org-indent-mode} for all files by customizing the variable @code{org-startup-indented}, or you can turn it on for individual files using @smallexample #+STARTUP: indent @end smallexample If you want a similar effect in earlier version of Emacs and/or Org, or if you want the indentation to be hard space characters so that the plain text file looks as similar as possible to the Emacs display, Org supports you by helping to indent (with @key{TAB}) text below each headline, by hiding leading stars, and by only using levels 1, 3, etc to get two characters indentation for each level. To get this support in a file, use @smallexample #+STARTUP: hidestars odd @end smallexample @node MobileOrg, , Clean view, Miscellaneous @section MobileOrg @i{MobileOrg} is the name of the mobile companion app for Org mode, currently available for iOS and for Android. @i{MobileOrg} offers offline viewing and capture support for an Org mode system rooted on a ``real'' computer. It does also allow you to record changes to existing entries. The @uref{http://mobileorg.ncogni.to/, iOS implementation} for the @i{iPhone/iPod Touch/iPad} series of devices, was developed by Richard Moreland. Android users should check out @uref{http://wiki.github.com/matburt/mobileorg-android/, MobileOrg Android} by Matt Jones. The two implementations are not identical but offer similar features. @seealso{ @uref{http://orgmode.org/manual/Miscellaneous.html#Miscellaneous, Chapter 15 of the manual}@* @uref{http://orgmode.org/manual/MobileOrg.html#MobileOrg, Appendix B of the manual}@* @uref{http://orgmode.org/orgcard.pdf,Key reference card}} @c @node GNU Free Documentation License, , Miscellaneous, Top @c @appendix GNU Free Documentation License @c @include doclicense.texi @bye @c Local variables: @c fill-column: 77 @c End: @c LocalWords: webdavhost pre