* org-ctrl-c-ctrl-c in comments
@ 2015-12-08 10:29 Uwe Brauer
2015-12-08 16:36 ` Charles C. Berry
0 siblings, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 10:29 UTC (permalink / raw)
To: emacs-orgmode
Hello
I have some tables in comment blocks like
#+begin_comment
| Col1 | Col2 |
| 1 | Name1 |
| 2 | Name2 |
| 3 | Name3 |
#+end_comment
But within a comment org-ctrl-c-ctrl-c does not work. So I cannot
reformat the table. How can I enable it?
regards
Uwe Brauer
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 10:29 org-ctrl-c-ctrl-c in comments Uwe Brauer
@ 2015-12-08 16:36 ` Charles C. Berry
2015-12-08 17:10 ` Uwe Brauer
0 siblings, 1 reply; 25+ messages in thread
From: Charles C. Berry @ 2015-12-08 16:36 UTC (permalink / raw)
To: Uwe Brauer; +Cc: emacs-orgmode
On Tue, 8 Dec 2015, Uwe Brauer wrote:
> Hello
>
> I have some tables in comment blocks like
>
> #+begin_comment
> | Col1 | Col2 |
> | 1 | Name1 |
> | 2 | Name2 |
> | 3 | Name3 |
>
> #+end_comment
>
> But within a comment org-ctrl-c-ctrl-c does not work. So I cannot
> reformat the table. How can I enable it?
>
Use an org src block and you will be able to edit natively via
org-ctrl-c-ctrl-c. AFAICS, this behaves like `comment' in other respects.
#+begin_src org :exports none :eval never
| Col1 | Col2 |
| 1 | Name1 |
| 2 | Name2 |
| 3 | Name3 |
#+end_src
HTH,
Chuck
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 16:36 ` Charles C. Berry
@ 2015-12-08 17:10 ` Uwe Brauer
2015-12-08 17:30 ` Nick Dokos
2015-12-09 1:31 ` Charles C. Berry
0 siblings, 2 replies; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 17:10 UTC (permalink / raw)
To: emacs-orgmode
> On Tue, 8 Dec 2015, Uwe Brauer wrote:
> Use an org src block and you will be able to edit natively via
> org-ctrl-c-ctrl-c. AFAICS, this behaves like `comment' in other
> respects.
For me in GNU emacs 25.0.50.1 and org 8.3.1 the following works
| Col1 | Col2 |
| 1 | Name1 |
| 2 | Name2 |
| 3 | Name3 | ^ |
^=cursor C-c C-c gives
| Col1 | Col2 | |
| 1 | Name1 | |
| 2 | Name2 | |
| 3 | Name3 | |
But that does not:
Here is what I am doing
#+begin_src org :exports none :eval none
| Col1 | Col2 |
| 1 | Name1 |
| 2 | Name2 |
| 3 | Name3 |^ |
#+end_src
C-c C-c
Minibuffer: evaluate this org code block on your system (yes or no)
yes
org-babel-execute-src-block: No org-babel-execute function for org!
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 17:10 ` Uwe Brauer
@ 2015-12-08 17:30 ` Nick Dokos
2015-12-08 17:36 ` Uwe Brauer
2015-12-09 1:31 ` Charles C. Berry
1 sibling, 1 reply; 25+ messages in thread
From: Nick Dokos @ 2015-12-08 17:30 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
> > On Tue, 8 Dec 2015, Uwe Brauer wrote:
>
> > Use an org src block and you will be able to edit natively via
> > org-ctrl-c-ctrl-c. AFAICS, this behaves like `comment' in other
> > respects.
>
> For me in GNU emacs 25.0.50.1 and org 8.3.1 the following works
>
> | Col1 | Col2 |
> | 1 | Name1 |
> | 2 | Name2 |
> | 3 | Name3 | ^ |
>
> ^=cursor C-c C-c gives
>
> | Col1 | Col2 | |
> | 1 | Name1 | |
> | 2 | Name2 | |
> | 3 | Name3 | |
>
> But that does not:
>
> Here is what I am doing
>
>
> #+begin_src org :exports none :eval none
>
> | Col1 | Col2 |
> | 1 | Name1 |
> | 2 | Name2 |
> | 3 | Name3 |^ |
>
> #+end_src
>
> C-c C-c
>
>
> Minibuffer: evaluate this org code block on your system (yes or no)
>
> yes
>
> org-babel-execute-src-block: No org-babel-execute function for org!
You need to load ob-org.
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 17:30 ` Nick Dokos
@ 2015-12-08 17:36 ` Uwe Brauer
2015-12-08 18:34 ` Nick Dokos
0 siblings, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 17:36 UTC (permalink / raw)
To: emacs-orgmode
> Uwe Brauer <oub@mat.ucm.es> writes:
> You need to load ob-org.
Yes, ok I loaded it but
#+BEGIN_SRC org :exports none
| uwe | test | | |^ |
| hall | | | |
| | | | |
#+END_SRC
C-c C-c
Does *not* lead to
#+BEGIN_SRC org :exports none
| uwe | test | | | |
| hall | | | | |
| | | | | |
#+END_SRC
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 17:36 ` Uwe Brauer
@ 2015-12-08 18:34 ` Nick Dokos
2015-12-08 19:07 ` Uwe Brauer
0 siblings, 1 reply; 25+ messages in thread
From: Nick Dokos @ 2015-12-08 18:34 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
> > Uwe Brauer <oub@mat.ucm.es> writes:
>
> > You need to load ob-org.
> Yes, ok I loaded it but
>
> #+BEGIN_SRC org :exports none
>
> | uwe | test | | |^ |
> | hall | | | |
> | | | | |
>
> #+END_SRC
>
> C-c C-c
>
> Does *not* lead to
>
> #+BEGIN_SRC org :exports none
> | uwe | test | | | |
> | hall | | | | |
> | | | | | |
> #+END_SRC
Indeed - org-at-table-p gives nil if the table is inside
a comment or inside a source block (or inside any other block
afaict).
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 18:34 ` Nick Dokos
@ 2015-12-08 19:07 ` Uwe Brauer
2015-12-08 19:28 ` Nick Dokos
0 siblings, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 19:07 UTC (permalink / raw)
To: emacs-orgmode
> Uwe Brauer <oub@mat.ucm.es> writes:
> Indeed - org-at-table-p gives nil if the table is inside
> a comment or inside a source block (or inside any other block
> afaict).
Well, how could this behavior be changed? I found it quite cumbersome.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 19:07 ` Uwe Brauer
@ 2015-12-08 19:28 ` Nick Dokos
2015-12-08 21:31 ` Uwe Brauer
2015-12-08 21:39 ` Uwe Brauer
0 siblings, 2 replies; 25+ messages in thread
From: Nick Dokos @ 2015-12-08 19:28 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
> > Uwe Brauer <oub@mat.ucm.es> writes:
>
> > Indeed - org-at-table-p gives nil if the table is inside
> > a comment or inside a source block (or inside any other block
> > afaict).
>
> Well, how could this behavior be changed? I found it quite cumbersome.
Well, I'm not an expert on org syntax but reading the comments of
org-element.el, I see I was wrong about the other blocks: "greater
elements" can contain other elements (e.g. tables). The list of
"greater elements" given there is
,----
| ;; Element containing other elements (and only elements) are called
| ;; greater elements. Concerned types are: `center-block', `drawer',
| ;; `dynamic-block', `footnote-definition', `headline', `inlinetask',
| ;; `item', `plain-list', `property-drawer', `quote-block', `section'
| ;; and `special-block'.
`----
So center-blocks, quote-blocks and special blocks allow the table to
be recognized as a table, whereas comment-blocks, src-blocks and
verse-blocks do not.
Nicolas et al. will surely correct any (more) mistakes in this.
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 19:28 ` Nick Dokos
@ 2015-12-08 21:31 ` Uwe Brauer
2015-12-08 21:39 ` Uwe Brauer
1 sibling, 0 replies; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 21:31 UTC (permalink / raw)
To: emacs-orgmode
>>> "Nick" == Nick Dokos <ndokos@gmail.com> writes:
> Uwe Brauer <oub@mat.ucm.es> writes:
>> > Uwe Brauer <oub@mat.ucm.es> writes:
>>
>> > Indeed - org-at-table-p gives nil if the table is inside
>> > a comment or inside a source block (or inside any other block
>> > afaict).
>>
>> Well, how could this behavior be changed? I found it quite cumbersome.
> Well, I'm not an expert on org syntax but reading the comments of
> org-element.el, I see I was wrong about the other blocks: "greater
> elements" can contain other elements (e.g. tables). The list of
> "greater elements" given there is
> ,----
> | ;; Element containing other elements (and only elements) are called
> | ;; greater elements. Concerned types are: `center-block', `drawer',
> | ;; `dynamic-block', `footnote-definition', `headline', `inlinetask',
> | ;; `item', `plain-list', `property-drawer', `quote-block', `section'
> | ;; and `special-block'.
> `----
> So center-blocks, quote-blocks and special blocks allow the table to
> be recognized as a table, whereas comment-blocks, src-blocks and
> verse-blocks do not.
Ok, thanks for clarifying this. I try to convince Nicolas to customize
this behavior, such that comment-blocks could be greater elements.
> Nicolas et al. will surely correct any (more) mistakes in this.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 19:28 ` Nick Dokos
2015-12-08 21:31 ` Uwe Brauer
@ 2015-12-08 21:39 ` Uwe Brauer
2015-12-08 21:46 ` Nicolas Goaziou
1 sibling, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 21:39 UTC (permalink / raw)
To: emacs-orgmode
> Uwe Brauer <oub@mat.ucm.es> writes:
> Well, I'm not an expert on org syntax but reading the comments of
> org-element.el, I see I was wrong about the other blocks: "greater
> elements" can contain other elements (e.g. tables). The list of
> "greater elements" given there is
> ,----
> | ;; Element containing other elements (and only elements) are called
> | ;; greater elements. Concerned types are: `center-block', `drawer',
> | ;; `dynamic-block', `footnote-definition', `headline', `inlinetask',
> | ;; `item', `plain-list', `property-drawer', `quote-block', `section'
> | ;; and `special-block'.
> `----
> So center-blocks, quote-blocks and special blocks allow the table to
> be recognized as a table, whereas comment-blocks, src-blocks and
> verse-blocks do not.
The point is that I have emails which contains tables and I don't want
to send these tables. So one possibility is to use comment blocks and
org-mime-htmlize, which does not export text in comments blocks.
Are there other blocks, which are greater elements and can be configured
that they are *not* exported?
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 21:39 ` Uwe Brauer
@ 2015-12-08 21:46 ` Nicolas Goaziou
2015-12-08 21:58 ` Uwe Brauer
2015-12-08 22:29 ` Uwe Brauer
0 siblings, 2 replies; 25+ messages in thread
From: Nicolas Goaziou @ 2015-12-08 21:46 UTC (permalink / raw)
To: emacs-orgmode
Hello,
Uwe Brauer <oub@mat.ucm.es> writes:
> The point is that I have emails which contains tables and I don't want
> to send these tables. So one possibility is to use comment blocks and
> org-mime-htmlize, which does not export text in comments blocks.
>
> Are there other blocks, which are greater elements and can be configured
> that they are *not* exported?
You can use drawers for that.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 21:46 ` Nicolas Goaziou
@ 2015-12-08 21:58 ` Uwe Brauer
2015-12-08 22:29 ` Uwe Brauer
1 sibling, 0 replies; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 21:58 UTC (permalink / raw)
To: emacs-orgmode
>>> "Nicolas" == Nicolas Goaziou <mail@nicolasgoaziou.fr> writes:
> Hello,
> Uwe Brauer <oub@mat.ucm.es> writes:
>> The point is that I have emails which contains tables and I don't want
>> to send these tables. So one possibility is to use comment blocks and
>> org-mime-htmlize, which does not export text in comments blocks.
>>
>> Are there other blocks, which are greater elements and can be configured
>> that they are *not* exported?
> You can use drawers for that.
Thanks, but could you please give me any pointer?
> Regards,
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 21:46 ` Nicolas Goaziou
2015-12-08 21:58 ` Uwe Brauer
@ 2015-12-08 22:29 ` Uwe Brauer
2015-12-09 1:48 ` Nick Dokos
1 sibling, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-08 22:29 UTC (permalink / raw)
To: emacs-orgmode
> Hello,
> Uwe Brauer <oub@mat.ucm.es> writes:
> You can use drawers for that.
No I cannot, I just found out about drawers,
however they *are* exported, when calling org-mime-htmlize, so they
don't serve my needs.
Uwe Brauer
> Regards,
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 17:10 ` Uwe Brauer
2015-12-08 17:30 ` Nick Dokos
@ 2015-12-09 1:31 ` Charles C. Berry
2015-12-09 1:35 ` Charles C. Berry
2015-12-09 8:45 ` Uwe Brauer
1 sibling, 2 replies; 25+ messages in thread
From: Charles C. Berry @ 2015-12-09 1:31 UTC (permalink / raw)
To: Uwe Brauer; +Cc: emacs-orgmode
On Tue, 8 Dec 2015, Uwe Brauer wrote:
>
> > On Tue, 8 Dec 2015, Uwe Brauer wrote:
>
> > Use an org src block and you will be able to edit natively via
> > org-ctrl-c-ctrl-c. AFAICS, this behaves like `comment' in other
> > respects.
>
> For me in GNU emacs 25.0.50.1 and org 8.3.1 the following works
>
> | Col1 | Col2 |
> | 1 | Name1 |
> | 2 | Name2 |
> | 3 | Name3 | ^ |
>
> ^=cursor C-c C-c gives
>
> | Col1 | Col2 | |
> | 1 | Name1 | |
> | 2 | Name2 | |
> | 3 | Name3 | |
>
> But that does not:
>
> Here is what I am doing
>
>
> #+begin_src org :exports none :eval none
>
> | Col1 | Col2 |
> | 1 | Name1 |
> | 2 | Name2 |
> | 3 | Name3 |^ |
>
> #+end_src
>
> C-c C-c
>
Sorry. You have to put the code into an edit buffer to be able to use
native org mode edit commands.
So with the cursor where you have indicated above,
: C-c ' C-c C-c C-c '
results in
--8<---------------cut here---------------start------------->8---
#+begin_src org :exports none :eval none
| Col1 | Col2 | |
| 1 | Name1 | |
| 2 | Name2 | |
| 3 | Name3 | |
#+end_src
--8<---------------cut here---------------end--------------->8---
Of course, you probably want to do more editing than just the 'C-c C-c'
bit, but you get the idea - enter the src edit buffer, edit away, when you
are done exit the src edit buffer.
HTH,
Chuck
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 1:31 ` Charles C. Berry
@ 2015-12-09 1:35 ` Charles C. Berry
2015-12-09 8:45 ` Uwe Brauer
1 sibling, 0 replies; 25+ messages in thread
From: Charles C. Berry @ 2015-12-09 1:35 UTC (permalink / raw)
To: Uwe Brauer; +Cc: emacs-orgmode
See at bottom one more thing.
On Tue, 8 Dec 2015, Charles C. Berry wrote:
> On Tue, 8 Dec 2015, Uwe Brauer wrote:
>
>>
>> > On Tue, 8 Dec 2015, Uwe Brauer wrote:
>>
>> > Use an org src block and you will be able to edit natively via
>> > org-ctrl-c-ctrl-c. AFAICS, this behaves like `comment' in other
>> > respects.
>>
>> For me in GNU emacs 25.0.50.1 and org 8.3.1 the following works
>>
>> | Col1 | Col2 |
>> | 1 | Name1 |
>> | 2 | Name2 |
>> | 3 | Name3 | ^ |
>>
>> ^=cursor C-c C-c gives
>>
>> | Col1 | Col2 | |
>> | 1 | Name1 | |
>> | 2 | Name2 | |
>> | 3 | Name3 | |
>>
>> But that does not:
>>
>> Here is what I am doing
>>
>>
>> #+begin_src org :exports none :eval none
>>
>> | Col1 | Col2 |
>> | 1 | Name1 |
>> | 2 | Name2 |
>> | 3 | Name3 |^ |
>>
>> #+end_src
>>
>> C-c C-c
>>
>
> Sorry. You have to put the code into an edit buffer to be able to use native
> org mode edit commands.
>
> So with the cursor where you have indicated above,
>
> : C-c ' C-c C-c C-c '
>
> results in
>
>
> --8<---------------cut here---------------start------------->8---
> #+begin_src org :exports none :eval none
>
> | Col1 | Col2 | |
> | 1 | Name1 | |
> | 2 | Name2 | |
> | 3 | Name3 | |
>
> #+end_src
> --8<---------------cut here---------------end--------------->8---
>
> Of course, you probably want to do more editing than just the 'C-c C-c' bit,
> but you get the idea - enter the src edit buffer, edit away, when you are
> done exit the src edit buffer.
Should have said: you do NOT need ob-org for this to work on org src
blocks you have no intention of exporting.
Chuck
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-08 22:29 ` Uwe Brauer
@ 2015-12-09 1:48 ` Nick Dokos
2015-12-09 8:40 ` Uwe Brauer
0 siblings, 1 reply; 25+ messages in thread
From: Nick Dokos @ 2015-12-09 1:48 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
> > Hello,
> > Uwe Brauer <oub@mat.ucm.es> writes:
>
>
> > You can use drawers for that.
>
> No I cannot, I just found out about drawers,
> however they *are* exported, when calling org-mime-htmlize, so they
> don't serve my needs.
>
Even if you set
#+OPTIONS: d:nil
?
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 1:48 ` Nick Dokos
@ 2015-12-09 8:40 ` Uwe Brauer
2015-12-09 13:26 ` Nick Dokos
0 siblings, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-09 8:40 UTC (permalink / raw)
To: emacs-orgmode
>>> "Nick" == Nick Dokos <ndokos@gmail.com> writes:
> Uwe Brauer <oub@mat.ucm.es> writes:
>> > Hello,
>> > Uwe Brauer <oub@mat.ucm.es> writes:
>>
>>
>> > You can use drawers for that.
>>
>> No I cannot, I just found out about drawers,
>> however they *are* exported, when calling org-mime-htmlize, so they
>> don't serve my needs.
>>
> Even if you set
> #+OPTIONS: d:nil
You mean
Hello
#+OPTIONS: d:nil
:test:
| this | that
:END:
That indeed works, thanks!
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 1:31 ` Charles C. Berry
2015-12-09 1:35 ` Charles C. Berry
@ 2015-12-09 8:45 ` Uwe Brauer
2015-12-09 11:48 ` Eric S Fraga
2015-12-09 13:29 ` Nick Dokos
1 sibling, 2 replies; 25+ messages in thread
From: Uwe Brauer @ 2015-12-09 8:45 UTC (permalink / raw)
To: emacs-orgmode
> On Tue, 8 Dec 2015, Uwe Brauer wrote:
> Sorry. You have to put the code into an edit buffer to be able to use
> native org mode edit commands.
I still do not understand what you mean by edit buffer, I copied
the lines below in the *scratch* buffer (or it could be a message buffer)
> So with the cursor where you have indicated above,
> : C-c ' C-c C-c C-c '
Really all these keys? : C-c ' C-c C-c C-c '
Does not work for me, nothing happens. Thanks for your help,I am really
sorry, but I reproduce your steps.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 8:45 ` Uwe Brauer
@ 2015-12-09 11:48 ` Eric S Fraga
2015-12-09 20:04 ` Uwe Brauer
2015-12-09 13:29 ` Nick Dokos
1 sibling, 1 reply; 25+ messages in thread
From: Eric S Fraga @ 2015-12-09 11:48 UTC (permalink / raw)
To: emacs-orgmode
On Wednesday, 9 Dec 2015 at 08:45, Uwe Brauer wrote:
> Really all these keys? : C-c ' C-c C-c C-c '
Without the ":".
the sequence means edit the block in that block's language (C-c '),
update table (C-c C-c), and finish editing block and return to main text
(C-c ').
--
: Eric S Fraga (0xFFFCF67D), Emacs 25.0.50.2, Org release_8.3.2-379-g38fd09
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 8:40 ` Uwe Brauer
@ 2015-12-09 13:26 ` Nick Dokos
2015-12-09 17:23 ` Uwe Brauer
0 siblings, 1 reply; 25+ messages in thread
From: Nick Dokos @ 2015-12-09 13:26 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
>>>> "Nick" == Nick Dokos <ndokos@gmail.com> writes:
>
> > Uwe Brauer <oub@mat.ucm.es> writes:
> >> > Hello,
> >> > Uwe Brauer <oub@mat.ucm.es> writes:
> >>
> >>
> >> > You can use drawers for that.
> >>
> >> No I cannot, I just found out about drawers,
> >> however they *are* exported, when calling org-mime-htmlize, so they
> >> don't serve my needs.
> >>
>
> > Even if you set
>
> > #+OPTIONS: d:nil
>
> You mean
> Hello
>
> #+OPTIONS: d:nil
> :test:
>
> | this | that
> :END:
>
>
> That indeed works, thanks!
>
OK - you can also select the drawers that you will (or will not) export.
See the doc for the variable org-export-with-drawers (which is what is
manipulated with the d: option above).
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 8:45 ` Uwe Brauer
2015-12-09 11:48 ` Eric S Fraga
@ 2015-12-09 13:29 ` Nick Dokos
1 sibling, 0 replies; 25+ messages in thread
From: Nick Dokos @ 2015-12-09 13:29 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
> > On Tue, 8 Dec 2015, Uwe Brauer wrote:
>
> > Sorry. You have to put the code into an edit buffer to be able to use
> > native org mode edit commands.
>
> I still do not understand what you mean by edit buffer,
(info "(org) Editing source code")
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 13:26 ` Nick Dokos
@ 2015-12-09 17:23 ` Uwe Brauer
2015-12-09 17:33 ` Nick Dokos
0 siblings, 1 reply; 25+ messages in thread
From: Uwe Brauer @ 2015-12-09 17:23 UTC (permalink / raw)
To: emacs-orgmode
> Uwe Brauer <oub@mat.ucm.es> writes:
> OK - you can also select the drawers that you will (or will not) export.
> See the doc for the variable org-export-with-drawers (which is what is
> manipulated with the d: option above).
Silly question: is there any keybinding for inserting automatically
#+OPTIONS: d:nil
before the drawer?
I can't find anything in the documentation.
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 17:23 ` Uwe Brauer
@ 2015-12-09 17:33 ` Nick Dokos
2015-12-09 20:00 ` Uwe Brauer
0 siblings, 1 reply; 25+ messages in thread
From: Nick Dokos @ 2015-12-09 17:33 UTC (permalink / raw)
To: emacs-orgmode
Uwe Brauer <oub@mat.ucm.es> writes:
> > Uwe Brauer <oub@mat.ucm.es> writes:
>
> > OK - you can also select the drawers that you will (or will not) export.
> > See the doc for the variable org-export-with-drawers (which is what is
> > manipulated with the d: option above).
>
> Silly question: is there any keybinding for inserting automatically
> #+OPTIONS: d:nil
>
> before the drawer?
> I can't find anything in the documentation.
Not that I know of, but you can use
(info "(org) Easy templates")
to add a shortcut.
--
Nick
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 17:33 ` Nick Dokos
@ 2015-12-09 20:00 ` Uwe Brauer
0 siblings, 0 replies; 25+ messages in thread
From: Uwe Brauer @ 2015-12-09 20:00 UTC (permalink / raw)
To: emacs-orgmode
> Uwe Brauer <oub@mat.ucm.es> writes:
> Not that I know of, but you can use
> (info "(org) Easy templates")
> to add a shortcut.
Great works nicely. Thanks
^ permalink raw reply [flat|nested] 25+ messages in thread
* Re: org-ctrl-c-ctrl-c in comments
2015-12-09 11:48 ` Eric S Fraga
@ 2015-12-09 20:04 ` Uwe Brauer
0 siblings, 0 replies; 25+ messages in thread
From: Uwe Brauer @ 2015-12-09 20:04 UTC (permalink / raw)
To: emacs-orgmode
>>> "Eric" == Eric S Fraga <e.fraga@ucl.ac.uk> writes:
> On Wednesday, 9 Dec 2015 at 08:45, Uwe Brauer wrote:
>> Really all these keys? : C-c ' C-c C-c C-c '
> Without the ":".
> the sequence means edit the block in that block's language (C-c '),
> update table (C-c C-c), and finish editing block and return to main text
> (C-c ').
Ah now I understand, thanks Eric, thank you Chuck.
Not sure which solution is better the drawer or the src solution :-D
^ permalink raw reply [flat|nested] 25+ messages in thread
end of thread, other threads:[~2015-12-09 20:10 UTC | newest]
Thread overview: 25+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-12-08 10:29 org-ctrl-c-ctrl-c in comments Uwe Brauer
2015-12-08 16:36 ` Charles C. Berry
2015-12-08 17:10 ` Uwe Brauer
2015-12-08 17:30 ` Nick Dokos
2015-12-08 17:36 ` Uwe Brauer
2015-12-08 18:34 ` Nick Dokos
2015-12-08 19:07 ` Uwe Brauer
2015-12-08 19:28 ` Nick Dokos
2015-12-08 21:31 ` Uwe Brauer
2015-12-08 21:39 ` Uwe Brauer
2015-12-08 21:46 ` Nicolas Goaziou
2015-12-08 21:58 ` Uwe Brauer
2015-12-08 22:29 ` Uwe Brauer
2015-12-09 1:48 ` Nick Dokos
2015-12-09 8:40 ` Uwe Brauer
2015-12-09 13:26 ` Nick Dokos
2015-12-09 17:23 ` Uwe Brauer
2015-12-09 17:33 ` Nick Dokos
2015-12-09 20:00 ` Uwe Brauer
2015-12-09 1:31 ` Charles C. Berry
2015-12-09 1:35 ` Charles C. Berry
2015-12-09 8:45 ` Uwe Brauer
2015-12-09 11:48 ` Eric S Fraga
2015-12-09 20:04 ` Uwe Brauer
2015-12-09 13:29 ` Nick Dokos
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).