From: Tim Cross <theophilusx@gmail.com>
To: Nicolas Goaziou <mail@nicolasgoaziou.fr>
Cc: emacs-orgmode@gnu.org
Subject: Re: Bug: Latest org and goto-addr problems [9.0.5 (9.0.5-elpaplus @ /home/tim/.emacs.d/elpa/org-plus-contrib-20170210/)]
Date: Tue, 28 Feb 2017 09:05:27 +1100 [thread overview]
Message-ID: <CAC=50j-G7yeRJPEZ4Hx1STCRoVjVff+LnFv7FpzeGiAzj1O6YA@mail.gmail.com> (raw)
In-Reply-To: <CAC=50j_Awd8zpvSi3fj+Csh3Zzst_TAqbnEY=k+unW1at7djcw@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3858 bytes --]
Hi Nicolas,
now have at least one other report from someone able to reproduce this
error using the minimal config I provided. Note that you only get the error
on the first load of an org file containing source blocks. After the first
one has loaded, all others load file (including re-loading of the first
one).
Have now reproduced the issue just using the base org package instead of
org-plus-contrib and have got the same error using emacs 25.2-rc2
All works fine as soon as you remove the goto-address-prog-mode from the
init.
On 27 February 2017 at 08:49, Tim Cross <theophilusx@gmail.com> wrote:
> I need some help with this one as I'm running out of ideas.
>
> What I have done -
>
> 1. Completely removed all other org installs to eliminate possible 'mixed
> version' issues. This includes the org bundled with emacs 25.1. Made no
> difference.
>
> 2. Try opeing an org file which does not have any source blocks. All works
> fine. Then tried opening the test file with a single source block and got
> the same error. The source block was not 'fontified'. Tried opening an org
> file with no source block, did an org-reload and then opened the test file
> with source block. Same error.
>
> 3. This 'looks like' a require load error or timing issue. After opening
> the test file and getting the error message I then kill the buffer and then
> open the file again for a second time, no error and the source block is now
> fontified. Makes me think that perhaps org is trying to fontify the buffer
> before some required library is loaded, reports an error, continues
> processing and loads the missing items and from then is OK when you load
> the next org file with a source block.
>
> Question: How do you get this error to throw a backtrace? It seems
> toggle-on-debug has no effect. If I can get some additional information on
> when this error is being generated, I might be able to track this down
> further.
>
> Tim
>
>
> On 26 February 2017 at 21:59, Tim Cross <theophilusx@gmail.com> wrote:
>
>>
>> thanks Nicolas - will go back and dig further. Not sure where to look
>> next though.
>>
>> Tim
>>
>>
>> On 26 February 2017 at 20:19, Nicolas Goaziou <mail@nicolasgoaziou.fr>
>> wrote:
>>
>>> Hello,
>>>
>>> Tim Cross <theophilusx@gmail.com> writes:
>>>
>>> > There appers to be a compatibility issue between latest org-mode and
>>> > goto-addr.el in emacs 25.1. Specifically, the 'goto-address-prog-mode
>>> > funciton. When this function is added to prog-mode-hook, opening an org
>>> > file with src blocks results in an org-mode fontification error.
>>> >
>>> > Minimal init.el used to reproduce this issue is
>>> >
>>> > ;; -------------- Start init.el ------------------------------
>>> ---------
>>> > (require 'package)
>>> >
>>> > (setq package-enable-at-startup nil)
>>> > (add-to-list 'package-archives '("org" . "http://orgmode.org/elpa/"))
>>> > (package-initialize)
>>> >
>>> > (unless (package-installed-p 'org-plus-contrib)
>>> > (package-refresh-contents)
>>> > (package-install 'org-plus-contrib))
>>> >
>>> > (require 'org)
>>> >
>>> > (require 'goto-addr)
>>> >
>>> > (add-hook 'prog-mode-hook 'goto-address-prog-mode)
>>> >
>>> > ;; ------------------------ End init.el ------------------------------
>>> >
>>> > minimal test org file used to reporduce the problem
>>> >
>>> > ;; ----------------------- Start test.org
>>> -----------------------------
>>> > * Test
>>> > This is a simple test org file
>>> >
>>> > #+BEGIN_SRC emacs-lisp
>>> > (message "A Test")
>>> > #+END_SRC
>>> >
>>> > ;; ------------------------ End test.org -----------------------------
>>>
>>> FWIW, I cannot reproduce it.
>>>
>>> Regards,
>>>
>>> --
>>> Nicolas Goaziou
>>>
>>
>>
>>
>> --
>> regards,
>>
>> Tim
>>
>> --
>> Tim Cross
>>
>>
>
>
> --
> regards,
>
> Tim
>
> --
> Tim Cross
>
>
--
regards,
Tim
--
Tim Cross
[-- Attachment #2: Type: text/html, Size: 6537 bytes --]
prev parent reply other threads:[~2017-02-27 22:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-02-26 0:31 Bug: Latest org and goto-addr problems [9.0.5 (9.0.5-elpaplus @ /home/tim/.emacs.d/elpa/org-plus-contrib-20170210/)] Tim Cross
2017-02-26 9:19 ` Nicolas Goaziou
2017-02-26 10:59 ` Tim Cross
2017-02-26 21:49 ` Tim Cross
2017-02-27 22:05 ` Tim Cross [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAC=50j-G7yeRJPEZ4Hx1STCRoVjVff+LnFv7FpzeGiAzj1O6YA@mail.gmail.com' \
--to=theophilusx@gmail.com \
--cc=emacs-orgmode@gnu.org \
--cc=mail@nicolasgoaziou.fr \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).