* Re: Include FAQ to info? (was: Org-FAQ request for full-text dump)
2010-05-16 12:43 ` Matthew Lundin
@ 2010-05-21 21:01 ` Alan E. Davis
2010-05-22 16:32 ` Include FAQ to info? Matthew Lundin
0 siblings, 1 reply; 11+ messages in thread
From: Alan E. Davis @ 2010-05-21 21:01 UTC (permalink / raw)
To: Matthew Lundin; +Cc: Org Mode, Carsten Dominik
[-- Attachment #1.1: Type: text/plain, Size: 3112 bytes --]
Matthew:
There's an interest in org-help.org? Would there be any question about its
inclusion in org? No. It's currently in a state of disarray, however. Here
are some of my thoughts about its current state. As I mention below, I may
be able to clean it up this Summer.
I am afraid I got bogged down, for a number of reasons. I am stubborn,
and don't want to admit defeat, but it would be even better if someone who
really understands org-mode was able to carry it forward. And I have some
ideas about improving it, but haven't had time or focus to get it done.
I'll attach a current copy, but there are quite a few sections added, esp.
at the end, that were gratuitously personal notes as I was learning certain
features. If this were on some kind of git repo, I'd be interested in
working off of it, and I'd learn to submit a patch, perhaps.
One thing I thought about is the keystroke compatibility issue, that it
would be really nice if it worked like info. As it is, it is an editable
file, and I end up having to kill it to avoid overwriting it with some junk,
when I use it. The folding status is not persistent, another nice thing to
have (from info).
The file opens up as a folded top-level outline. The various headlines I
have set up to be links to the manual pages about the same topic. At I
tried to have one or two main keybinding clues present in the folded view at
least headline. So a clue to the keybindings, and a link to the manual.
Even lower level headlines may have manual links. That particular feature I
like *a lot*!
I have gotten a bit lost with many of the new features, like babel, and
haven't kept up on some of those. I was clueless about agenda, but have
begun to use it quite a bit, so at some point I worked on that section, but
it's a miasma, a tangled mass, at this point, and I should have to clean
that up. This is an example of a section I started to work on when I was
learning a certain feature or set of features.
So I guess that main caveat at this point is that it's become a personal
help file, and more and more personal as time goes on. Summer comes I would
at some point clean it up.
I assigned it to a key. For my key-binding setup, it worked ok to assign it
to "C-c 7". Maybe better to set it on a viewing mode, but I have been
prone to hack as a go.
Be all that as it may be, here is the "current" state of the file on my
system.
Alan.
On Sun, May 16, 2010 at 10:43 PM, Matthew Lundin <mdl@imapmail.org> wrote:
> Carsten Dominik <carsten.dominik@gmail.com> writes:
>
> > Hi Matt,
> >
> > no, org-help.org is not about the FAQ, it is a separate document, like
> > a quick reference, made by Alan Davis. It is more than the refcard,
> > less than the manual.
> >
> > It seems to live here:
> >
> > http://osdir.com/ml/attachments/orgF54hhOaC48.org
> >
> > Get in touch with Alan at lngndvs@gmail.com Maybe with some feedback
> > between the two of you, we will have a way to ship this with Org-mode
> > and to link it in.
>
> Great! I will contact Alan Davis about including org-help.org in the
> distribution.
>
> - Matt
>
>
[-- Attachment #1.2: Type: text/html, Size: 4061 bytes --]
[-- Attachment #2: org-help.org --]
[-- Type: application/octet-stream, Size: 64085 bytes --]
# org-help.org -*- mode: org fill-column:78-*-
# Time-stamp: <2010-04-12 14:31:34 ulod gastropod>
Most headlines are links to the org info manual.
* [[info:org:Visibility%20cycling][Visibility Cycling]] TAB C-i
rotate current subtree between states TAB
rotate entire buffer between states S-TAB, C-u TAB
show up to Level N C-u N TAB
restore property-dependent startup visibility C-u C-u TAB
show the whole file, including drawers C-u C-u C-u TAB
reveal context around point C-c C-r
show the current subtree, indirect buffer C-c C-x b
* [[info:org:Motion][Motion]] C-c C-n/p / C-c C-f/b / C-c C-u / C-c C-j
next/previous heading C-c C-n/p
next/previous heading, same level C-c C-f/b
backward to higher level heading C-c C-u
*org-goto*: jump elsewhere, indirect buffer C-c C-j
previous/next plain list item S-UP/DOWN
* [[info:org:Document%20Structure][Structure Editing]] M-RET / M-L/R / M-S-L/R
insert new heading/item at current level M-RET
insert new heading after subtree C-RET
insert new TODO entry/checkbox item M-S-RET
insert TODO entry/ckbx after subtree C-S-RET
promote/demote heading M-LEFT/RIGHT
promote/demote current subtree M-S-LEFT/RIGHT
*work on all headlines in a region*
move subtree/list item up/down M-S-UP/DOWN
refile subtree C-c C-w
kill subtree C-c C-x C-w
copy subtree C-c C-x M-w
yank subtree C-c C-x C-y or C-y
narrow buffer to current subtree C-x n s
widen restriction to full buffer C-x n w
** Converting to headlines/removing stars C-c *
turn line or list item into headline C-c *
if active region, turn all lines in region
into headlines
if first line a headline, remove stars
turn active headline into normal line
* Sorting C-c ^
** [[info:org:Structure%20editing][Sort same level]] C-c ^
children of current headline
if active region, all entries in region
prompts for sorting method
C-u C-c ^ sorting is case sensitive
C-u C-u C-c ^ duplicates are removed
** [[info:org:Sorting%20of%20agenda%20items][Sort Agenda Items]]
** Sort table lines in region C-c ^
* Checkboxes M-S-RET :NOTE:
[2009-02-01 Sun] New email on org list about this
insert new checkbox item in plain list M-S-RET
toggle checkbox(es) in region/entry/at point C-c C-x C-b
convert list to checkbox list C-c C-x C-b
g toggle checkbox at point C-c C-c
checkbox statistics cookies: insert [/] or [%]
update checkbox statistics (C-u : whole file) C-c #
* [[info:org:Archiving][Archiving]] C-c C-x a
toggle ARCHIVE tag C-c C-x a
force cycling of an ARCHIVEd tree C-TAB
move to Attic Sibling C-c C-x A
move subtree to archive file C-c C-x C-s
* Filtering and [[info:org:Sparse%20trees][Sparse Trees]] C-c /
construct a sparse tree by various criteria C-c /
view TODO's in sparse tree C-c C-v
global TODO list in agenda mode C-c a t^1
time sorted view of current org file C-c a L
* [[info:org:Tables][Tables]]
** Row and column editing M-L/R/U/D
move the current column left/right M-LEFT/RIGHT
kill the current column M-S-LEFT
insert new column to left of cursor position M-S-RIGHT
move the current row up/down M-UP/DOWN
kill the current row or horizontal line M-S-UP
insert new row above the current row M-S-DOWN
insert hline below (C-u : above) current row C-c -
sort lines in region C-c ^
to limit column width to N characters, use ...| <N> |...
edit the current field in a separate window C-c `
make current field fully visible C-u TAB
** Radio Tables and LaTeX Export
** Creating a table
just start typing, e.g. |Name|Phone|Age RET |- TAB
convert region to table C-c |
... separator at least 3 spaces C-3 C-c |
* Commands available inside tables
** Re-aligning and field motion C-c C-c / TAB
re-align the table without moving the cursor C-c C-c
re-align the table, move to next field TAB
move to previous field S-TAB
re-align the table, move to next row RET
** Regions C-c C-x C-w/M-w/C-y
cut rectangular region C-c C-x C-w
copy rectangular region C-c C-x M-w
paste rectangular region C-c C-x C-y
fill paragraph across selected cells C-c C-q
** Miscellaneous
export as tab-separated file M-x org-table-export
import tab-separated file M-x org-table-import
sum numbers in current column/rectangle C-c +
** Tables created with the table.el package
insert a new table.el table C-c
recognize existing table.el table C-c C-c
convert table (Org-mode table.el) C-c
** Spreadsheet
Formulas typed in field are executed by TAB, RET, and C-c C-c .
= introduces a column formula
:= introduced a field formula
*** Example
Example: Add Col1 and Col2 |=$1+$2 |
... with printf format specification |=$1+$2;%.2f|
... with constants from constants.el |=$1/$c/$cm |
sum from 2nd to 3rd hline |:=vsum(@II..@III)|
apply current column formula | = |
set and eval column formula C-c =
set and eval field formula C-u C-c =
re-apply all stored equations to current line C-c *
re-apply all stored equations to entire table C-u C-c *
iterate table to stability C-u C-u C-c *
rotate calculation mark through # * ! _ $ C-#
show line, column, formula reference C-c ?
toggle coordinate grid C-c }
toggle formula debugger C-c {
** Formula Editor
edit formulas in separate buffer C-c '
exit and install new formulas C-c C-c
exit, install, and apply new formulas C-u C-c C-c
abort C-c C-q
toggle reference style C-c C-r
pretty-print Lisp formula TAB
complete Lisp symbol M-TAB
shift reference point S-cursor
shift test line for column references M-up/down
scroll the window showing the table M-S-up/down
toggle table coordinate grid C-c }
* [[info:org:Hyperlinks][Links]] C-c l / C-c C-l
globally store link to the current location C-c l
insert a link (TAB completes stored links) C-c C-l
insert file link with file name completion C-u C-c C-l
edit (also hidden part of) link at point C-c C-l
open file links in emacs C-c C-o
...force open in emacs/other window C-u C-c C-o
open link at point mouse-1/2
...force open in emacs/other window mouse-3
record a position in mark ring C-c %
jump back to last followed link(s) C-c &
find next link C-c C-x C-n
find previous link C-c C-x C-p
edit code snippet of file at point C-c '
** Internal Links
<<My Target>> target
<<<My Target>>> radio target^2
[[*this text]] find headline
[[this text]] find target or text in buffer
[[this text][description]] optional link text
** External Links
file:/home/dominik/img/mars.jpg file, absolute
file:papers/last.pdf file, relative
file:projects.org::*that text find headline
file:projects.org::find me find trgt/string
http://www.astro.uva.nl/dominik on the web
mailto:adent@galaxy.net Email address
news:comp.emacs Usenet group
bbdb:Richard Stallman BBDB person
gnus:group GNUS group
gnus:group#id GNUS message
vm|wl|mhe|rmail:folder Mail folder
vm|wl|mhe|rmail:folder#id Mail message
info:emacs:Regexps Info file:node
shell:ls *.org shell command
elisp:(calendar) elisp form
[[external link][description]] optional link text
~* Completion
In-buffer completion completes TODO keywords at headlinestart,
TeX macros after "\"
option keywords after "#-"
TAGS after ":"
and dictionary words elsewhere.
Complete word at point M-TAB
* [[info:org:TODO%20Items][TODO Items]] M-S-RET C-c C-t
insert new TODO entry/checkbox item M-S-RET
insert TODO entry/ckbx after subtree C-S-RET
CONVERT CURRENT HEADING TO TODO C-c C-t
rotate the state of the current item C-c C-t
select next/previous state S-LEFT/RIGHT
select next/previous set C-S-LEFT/RIGHT
view TODO items in a sparse tree C-c C-v
view 3rd TODO keyword's sparse tree C-3 C-c C-v
set the priority of the current item C-c , [ABC]
remove priority cookie from current item C-c , SPC
raise/lower priority of current item S-UP/DOWN^3
* [[info:org:Tags][Tags]] C-c C-q / C-c C-c / C-c \ :Check:
set tags for current heading C-c C-q
set tabs when on the heading C-c C-c
realign tags in all headings C-u C-c C-q
create sparse tree with matching tags C-c / T / C-c \
create global list of tag matches C-c a m
with \C-u prefix, ignore not TODO C-u C-c a m
global agenda list tag matches only TODO C-c a M
globally (agenda) match tags at cursor C-c C-o
* [[info:org:Properties%20and%20Columns][Properties and Column View]] C-c C-x p
set property C-c C-x p
special commands in property lines C-c C-c
next/previous allowed value S-left/right
turn on column view C-c C-x C-c
capture columns view in dynamic block C-c C-x i
quit column view q
next/previous allowed value S-left/right
next/previous allowed value n / p
edit value e
edit allowed values list a
show value v
make column wider/narrower > / <
move column left/right M-left/right
add new column M-S-right
Delete current column M-S-left
* [[info:org:Timestamps][Timestamps]] C-c . / C-c !
prompt for date and insert timestamp C-c .
like C-c . but insert date and time format C-u C-c .
Like C-c . but make stamp inactive C-c !
insert DEADLINE timestamp C-c C-d
insert SCHEDULED timestamp C-c C-s
create sparse tree with all deadlines due C-c / d
the time between 2 dates in a time range C-c C-y
change timestamp at cursor by 1 day S-RIGHT/LEFT
change year/month/day at cursor by 1 S-UP/DOWN
access the calendar for the current date C-c >
insert timestamp matching date in calendar C-c <
access agenda for current date C-c C-o
Select date while prompted mouse-1/RET
Toggle custom format display for dates/times C-c C-x C-t
* [[info:org:Inserting%20deadline/schedule][Schedule and Deadline]] C-c C-s / C-c C-d
* [[info:org:Clocking%20work%20time][Clocking time]] C-c C-x C-i / C-c C-x C-o
start clock on current item C-c C-x C-i
stop clock on current item C-c C-x C-o
cancel current clock C-c C-x C-x
display total subtree times C-c C-x C-d
remove displayed times C-c C-c
insert/update table with clock report C-c C-x C-r
* [[info:org:Relative%20timer][Relative time clock]] C-c C-x . / C-c C-x -
insert a relative time into the buffer C-c C-x .
the first time the timer is started
reset relative time to Zero C-u C-c C-x .
insert a description list item with time C-c C-x -
with prefix set to zero C-u C-c C-x -
reset timer without inserting anything C-c C-x 0
set to a specific offset C-u C-c C-x 0
with C-c C-u prefix, change all times in region
by a given offset C-c C-u C-c C-x 0
pause timer C-c C-x ,
stop timer C-u C-c C-x ,
* Countdown timer (Teatime Functionality) C-c C-x ; :TODO:
From Agenda: ";"v
On mailing list, but didn't find in up to date docs on [2009-08-10 Mon]
* [[info:org:Refiling%20notes][Refiling]] C-c C-w
C-c C-w Refile entry or region at point
C-u C-c C-w Use the refile interface to jump to a heading.
C-u C-u C-c C-w Jump to location where org-refile last moved a tree
By default, all level 1 headlines in the current buffer are considered to be
targets, but you can have more complex definitions across a number of
files. See [[*Variable%20org%20refile%20targets][local link to docstring of variable org-refile-targets]] for
details.
** Variables
Feature Variable (click to customize)
-----------------------------------------------------------------
[[elisp:(customize-variable 'org-reverse-note-order)][org-reverse-note-order]]
using files [[(customize-variable%20'org-refile-targets)][org-refile-targets]]
path completion [[elisp:(customize-variable%20'org-refile-use-outline-path)][org-refile-use-outline-path]]
" [[elisp:(customize-variable%20'org-outline-path-complete-in-steps)][org-outline-path-complete-in-steps]]
create note on the fly [[elisp:(customize-variable%20'org-refile-allow-creating-parent-nodes%20%20)][org-refile-allow-creating-parent-nodes]]
*** Variable org-refile-targets
org-refile-targets is a variable defined in `org.el'.
Its value is
((nil :maxlevel . 1))
Documentation:
Targets for refiling entries with C-c C-w.
This is list of cons cells. Each cell contains:
- a specification of the files to be considered, either a list of files,
or a symbol whose function or variable value will be used to retrieve
a file name or a list of file names. If you use `org-agenda-files' for
that, all agenda files will be scanned for targets. Nil means, consider
headings in the current buffer.
- A specification of how to find candidate refile targets. This may be
any of:
- a cons cell (:tag . "TAG") to identify refile targets by a tag.
This tag has to be present in all target headlines, inheritance will
not be considered.
- a cons cell (:todo . "KEYWORD") to identify refile targets by
todo keyword.
- a cons cell (:regexp . "REGEXP") with a regular expression matching
headlines that are refiling targets.
- a cons cell (:level . N). Any headline of level N is considered a target.
Note that, when `org-odd-levels-only' is set, level corresponds to
order in hierarchy, not to the number of stars.
- a cons cell (:maxlevel . N). Any headline with level <= N is a target.
Note that, when `org-odd-levels-only' is set, level corresponds to
order in hierarchy, not to the number of stars.
You can set the variable `org-refile-target-verify-function' to a function
to verify each headline found by the simple critery above.
When this variable is nil, all top-level headlines in the current buffer
are used, equivalent to the value `((nil . (:level . 1))'.
You can customize this variable.
* Remember (NOTE ABOUT THIS) C-c r [X] / C-u C-c r [X] :CheckMe:
I thought there ought to be some stuff in this file about remember.
* [[info:org:Remember][Remember Templates]]
%^{PROMPT} prompt the user for a string and replace this sequence with it.
You may specify a default value and a completion table with
%^{prompt|default|completion2|completion3...}
The arrow keys access a prompt-specific history.
%a annotation, normally the link created with `org-store-link'
%A like `%a', but prompt for the description part
%i initial content, the region when remember is called with C-u.
The entire text will be indented like `%i' itself.
%t timestamp, date only
%T timestamp with date and time
%u, %U like the above, but inactive timestamps
%^t like `%t', but prompt for date. Similarly `%^T', `%^u', `%^U'
You may define a prompt like `%^{Birthday}t'
%n user name (taken from `user-full-name')
%c Current kill ring head.
%x Content of the X clipboard.
%^C Interactive selection of which kill or clip to use.
%^L Like `%^C', but insert as link.
%^g prompt for tags, with completion on tags in target file.
%k title of currently clocked task
%K link to currently clocked task
%^G prompt for tags, with completion all tags in all agenda files.
%^{PROP}p Prompt the user for a value for property PROP
%:keyword specific information for certain link types, see below
%[FILE] insert the contents of the file given by FILE
%(SEXP) evaluate Elisp SEXP and replace with the result
%! immediately store note after completing the template
(skipping the `C-c C-c' that normally triggers storing)
%& jump to target location immediately after storing note
* [[info:org:Agenda%20Views][Agenda Views]] C-c a
** TODO [#B] Agenda Commands (available in agenda buffer)
- as of [2009-12-15 Tue] use > to work on inactive timestamps
*** Calendar issues of all kinds
**** In Agenda buffer
- f/b:: go forward/back in time by one "org-agenda-ndays"
***** Remote editing
k ::
**** In Calendar
** TODO Cursor Keys in agenda buffer: there is some traffic on the list
*** Link to Manual: [[http://orgmode.org/manual/Agenda-commands.html#Agenda-commands][Org Agenda Commands]]
**** Motion
- n :: Next line (same as <up> and C-p).
- p :: Previous line (same as <down> and C-n).
***** View/Go to Org file
- mouse-3 ::
- <SPC> :: Display the original location of the item in another window. With prefix arg, make sure that the entire entry is made visible in the outline, not only the heading.
- L :: Display original location and recenter that window.
- mouse-2 ::
- mouse-1::
- <TAB> :: Go to the original location of the item in another window. Under Emacs 22, mouse-1 will also works for this.
- <RET> :: Go to the original location of the item and delete other windows.
- F :: Toggle Follow mode. In Follow mode, as you move the cursor through the agenda buffer, the other window always shows the corresponding location in the Org file. The initial setting for this mode in new agenda buffers can be set with the variable org-agenda-start-with-follow-mode.
- C-c C-x b :: Display the entire subtree of the current item in an indirect buffer. With a numeric prefix argument N, go up to level N and then take that tree. If N is negative, go up that many levels. With a C-u prefix, do not remove the previously used indirect buffer.
- C-c C-o :: Follow a link in the entry. This will offer a selection of any links in the text belonging to the referenced Org node. If there is only one link, it will be followed without a selection prompt.
**** Change display
- o :: Delete other windows.
- v d or short d ::
- v w or short w ::
- v m ::
- v y :: Switch to day/week/month/year view. When switching to day or week
view, this setting becomes the default for subsequent agenda
commands. Since month and year views are slow to create, they do
not become the default. A numeric prefix argument may be used to
jump directly to a specific day of the year, ISO week, month, or
year, respectively. For example, 32 d jumps to February 1st, 9 w
to ISO week number 9. When setting day, week, or month view, a
year may be encoded in the prefix argument as well. For example,
200712 w will jump to week 12 in 2007. If such a year
specification has only one or two digits, it will be mapped to
the interval 1938-2037.
- f:: Go forward in time to display the following org-agenda-ndays
days. For example, if the display covers a week, switch to the
following week. With prefix arg, go forward that many times
org-agenda-ndays days.
- b :: Go backward in time to display earlier dates.
- \. :: Go to today.
- j :: Prompt for a date and go there.
- D :: Toggle the inclusion of diary entries. See Weekly/daily agenda.
- v l or short l :: Toggle Logbook mode. In Logbook mode, entries that
were marked DONE while logging was on (variable org-log-done) are
shown in the agenda, as are entries that have been clocked on
that day. You can configure the entry types that should be
included in log mode using the variable
org-agenda-log-mode-items. When called with a C-u prefix, show
all possible logbook entries, including state changes. When
called with two prefix args C-u C-u, show only logging
information, nothing else.
- v [ or short [ :: Include inactive timestamps into the current
view. Only for weekly/daily agenda and timeline views.
- v a ::
- v A :: Toggle Archives mode. In Archives mode, trees that are marked
ARCHIVED are also scanned when producing the agenda. When you
use the capital A, even all archive files are included. To exit
archives mode, press v a again.
- v R or short R :: Toggle Clockreport mode. In Clockreport mode, the
daily/weekly agenda will always show a table with the clocked
times for the timespan and file scope covered by the current
agenda view. The initial setting for this mode in new agenda
buffers can be set with the variable
org-agenda-start-with-clockreport-mode.
- v E or short E :: Toggle entry text mode. In entry text mode, a number
of lines from the Org outline node referenced by an agenda line
will be displayed below the line. The maximum number of lines is
given by the variable org-agenda-entry-text-maxlines. Calling
this command with a numeric prefix argument will temporarily
modify that number to the prefix value.
- G :: Toggle the time grid on and off. See also the variables
org-agenda-use-time-grid and org-agenda-time-grid.
- r :: Recreate the agenda buffer, for example to reflect the changes
after modification of the timestamps of items with S-<left> and
S-<right>. When the buffer is the global TODO list, a prefix
argument is interpreted to create a selective list for a
specific TODO keyword.
- g :: Same as r.
- s ::
- C-x C-s :: Save all Org buffers in the current Emacs session, and also
the locations of IDs.
- C-c C-x C-c :: Invoke column view (see Column view) in the agenda
buffer. The column view format is taken from the entry at point,
or (if there is no entry at point), from the first entry in the
agenda view. So whatever the format for that entry would be in
the original buffer (taken from a property, from a #+COLUMNS
line, or from the default variable org-columns-default-format),
will be used in the agenda.
- C-c C-x > :: Remove the restriction lock on the agenda, if it is
currently restricted to a file or subtree (see Agenda files).
**** Secondary filtering and query editing
- /:: Filter the current agenda view with respect to a tag and/or effort
estimates. The difference between this and a custom agenda command
is that filtering is very fast, so that you can switch quickly
between different filters without having to recreate the agenda1
You will be prompted for a tag selection letter. Pressing <TAB> at
that prompt will offer use completion to select a tag (including
any tags that do not have a selection character). The command then
hides all entries that do not contain or inherit this tag. When
called with prefix arg, remove the entries that do have the tag. A
second / at the prompt will turn off the filter and unhide any
hidden entries. If the first key you press is either + or -, the
previous filter will be narrowed by requiring or forbidding the
selected additional tag. Instead of pressing + or - after /, you
can also immediately use the \ command.
In order to filter for effort estimates, you should set-up allowed
efforts globally, for example
(setq org-global-properties
'(("Effort_ALL". "0 0:10 0:30 1:00 2:00 3:00 4:00")))
You can then filter for an effort by first typing an operator, one
of <, >, and =, and then the one-digit index of an effort estimate
in your array of allowed values, where 0 means the 10th value. The
filter will then restrict to entries with effort smaller-or-equal,
equal, or larger-or-equal than the selected value. If the digits
0-9 are not used as fast access keys to tags, you can also simply
press the index digit directly without an operator. In this case,
< will be assumed. For application of the operator, entries
without a defined effort will be treated according to the value of
org-sort-agenda-noeffort-is-high. To filter for tasks without
effort definition, press ? as the operator.
- g ::
- \ :: Narrow the current agenda filter by an additional condition. When
called with prefix arg, remove the entries that do have the tag,
or that do match the effort criterion. You can achieve the same
effect by pressing + or - as the first key after the / command.
- [ ] { } :: in search view add new search words ([ and ]) or new
regular expressions ({ and }) to the query string. The opening
bracket/brace will add a positive search term prefixed by ‘+’,
indicating that this search term must occur/match in the
entry. The closing bracket/brace will add a negative search term
which must not occur/match in the entry for it to be selected.
**** Remote editing
- 0-9 :: Digit argument.
- C-\_ :: Undo a change due to a remote editing command. The change is undone both in the agenda buffer and in the remote buffer.
- t :: Change the TODO state of the item, both in the agenda and in the original org file.
- C-k :: Delete the current agenda item along with the entire subtree belonging to it in the original Org file. If the text to be deleted remotely is longer than one line, the kill needs to be confirmed by the user. See variable org-agenda-confirm-kill.
- C-c C-w :: Refile the entry at point.
- a :: Toggle the ARCHIVE tag for the current headline.
- A :: Move the subtree corresponding to the current entry to its archive sibling.
- $ :: Archive the subtree corresponding to the current headline. This means the entry will be moved to the configured archive location, most likely a different file.
- T :: Show all tags associated with the current item. This is useful if you have turned off org-agenda-show-inherited-tags, but still want to see all tags of a headline occasionally.
- : :: Set tags for the current headline. If there is an active region in the agenda, change a tag for all headings in the region.
- , :: Set the priority for the current item. Org mode prompts for the priority character. If you reply with <SPC>, the priority cookie is removed from the entry.
- P :: Display weighted priority of current item.
- +, S-<up> :: Increase the priority of the current item. The priority is changed in the original buffer, but the agenda is not resorted. Use the r key for this.
- -, S-<down> :: Decrease the priority of the current item.
- z :: Add a note to the entry. This note will be recorded, and then files to the same location where state change notes are put. Depending on org-log-into-drawer, this maybe inside a drawer.
- C-c C-a :: Dispatcher for all command related to attachments.
- C-c C-s :: Schedule this item
- C-c C-d :: Set a deadline for this item.
- k :: Agenda actions, to set dates for selected items to the cursor date. This command also works in the calendar! The command prompts for an additional key:
- m :: Mark the entry at point for action. You can also make entries
in Org files with C-c C-x C-k.
- d :: Set the deadline of the marked entry to the date at point.
- s :: Schedule the marked entry at the date at point.
- r :: Call org-remember with the cursor date as default date.
[Press r afterward to refresh the agenda and see the effect of the command.]
- S-<right> :: Change the timestamp associated with the current line by one day into the future. With a numeric prefix argument, change it by that many days. For example, 3 6 5 S-<right> will change it by a year. With a C-u prefix, change the time by one hour. If you immediately repeat the command, it will continue to change hours even without the prefix arg. With a double C-u C-u prefix, do the same for changing minutes. The stamp is changed in the original Org file, but the change is not directly reflected in the agenda buffer. Use r or g to update the buffer.
- S-<left> :: Change the timestamp associated with the current line by one day into the past.
- > :: Change the timestamp associated with the current line to today. The key > has been chosen, because it is the same as S-. on my keyboard.
- I :: Start the clock on the current item. If a clock is running already, it is stopped first.
- O :: Stop the previously started clock.
- X :: Cancel the currently running clock.
- J :: Jump to the running clock in another window.
**** Bulk remote editing selected entries
- s :: Mark the entry at point for bulk action.
- u :: Unmark entry for bulk action.
- U :: Unmark all marked entries for bulk action.
- B :: Bulk action: act on all marked entries in the agenda. This will prompt for another key to select the action to be applied:
- r :: Prompt for a single refile target and move all entries. The entries
: will no longer be in the agenda, refresh (g) to bring them back.
- $ :: Archive all selected entries.
- A :: Archive entries by moving them to their respective archive siblings.
- t :: Change TODO state. This prompts for a single TODO keyword and
changes the state of all selected entries, bypassing blocking and
suppressing logging notes (but not time stamps).
- + :: Add a tag to all selected entries.
- - :: Remove a tag from all selected entries.
- s :: Schedule all items to a new date. To shift existing schedule dates
by a fixed number of days, use something starting with double plus
at the prompt, for example ‘++8d’ or ‘++2w’.
- d :: Set deadline to a specific date.
**** Calendar commands
- c :: Open the Emacs calendar and move to the date at the agenda cursor.
- c :: When in the calendar, compute and show the Org mode agenda for the date at the cursor.
- i :: Insert a new entry into the diary. Prompts for the type of entry (day, weekly, monthly, yearly, anniversary, cyclic) and creates a new entry in the diary, just as i d, etc., would do in the calendar. The date is taken from the cursor position.
- M :: Show the phases of the moon for the three months around current date.
- S :: Show sunrise and sunset times. The geographical location must be set with calendar variables, see the documentation for the Emacs calendar.
- C :: Convert the date at cursor into many other cultural and historic calendars.
- H :: Show holidays for three months around the cursor date.
- M-x :: org-export-icalendar-combine-agenda-files
Export a single iCalendar file containing entries from all agenda files. This is a globally available command, and also available in the agenda menu.
***** Exporting to a file
- C-x C-w :: Write the agenda view to a file. Depending on the extension of the selected file name, the view will be exported as HTML (extension .html or .htm), Postscript (extension .ps), PDF (extension .pdf), Org-mode (extension .org), and plain text (any other extension). When called with a C-u prefix argument, immediately open the newly created file. Use the variable org-agenda-exporter-settings to set options for ps-print and for htmlize to be used during export.
***** Quit and Exit
- q ::
**** Quit agenda, remove the agenda buffer.
- x :: Exit agenda, remove the agenda buffer and all buffers loaded by Emacs for
the compilation of the agenda. Buffers created by the user to visit Org
files will not be removed.
*** OLD
**** MORE:
- C-x C-s
***** View Org file
show original location of item SPC/mouse-3
show and recenter window L
goto original location in other window TAB/mouse-2/mouse-1
goto original location, delete other windows RET
show subtree in indirect buffer, ded. frame b
toggle follow-mode f
***** Change display
delete other windows o
switch to day/week/month/year view d w m y
Toggle inclusion of diary entries D
toggle time grid for daily schedule G
toggle display of logbook entries l
toggle inclusion of archived trees/files v / C-u v
refresh agenda buffer with any changes r / g
filter with repect to a tag /
save all org-mode buffers s
display next/previous day,week,... RIGHT/LEFT
goto today .
***** Remote Editing from Agenda
You are not allowed to edit the agenda buffer itself, but
the following commands edit it "remotely":
undo a change due to remote editing C-_
digit argument 0-9
change state of current TODO item t
kill item and source C-k
Refile entry at point C-c C-w
toggle archive tag for headline a
move subtree to _Archive Sibling_ A
archive the subtree of headline $
(to configured archive location---?file)
show tags of current headline T
(including inherited tags)
set tags for current headline/region :
set priority of current item p / ','
raise priority of current item S-UP/DOWN / +
lower priority of current item S-DOWN / -
display weighted priority of current item P
dispatcher for attachment commands C-c C-a
schedule this item C-c C-s
set deadline for this item C-c C-d
change timestamp to one day earlier/later S-LEFT/RIGHT^3
change timestamp to today >
insert new entry into diary i
****** Agenda Actions for selected items
Dispatcher for agenda actions k
[mark entry at point for action a ]
may be out of date
set deadline to date at point d
schedule to date at point s
call remember, cursor date as default r
Press 'r' afterward to see effect of action
****** Clock actions I / O / X / J
start the clock on current item I
stop the clock on current item O
cancel the clock on current item X
jump to running clock entry, other window J
**** Agenda Actions for selected items
Dispatcher for agenda actions Suggested: C-c a
mark entry at point for action a
set deadline to date at point d
schedule to date at point s
call remember, cursor date as default r
Press 'r' afterward to see effect of action
***** Clock actions in agenda
start the clock on current item I
stop the clock on current item O
cancel the clock on current item X
jump to running clock entry, other window J
**** Misc
Open link in current line C-c C-o
**** Calendar commands in agenda
find agenda cursor date in calendar c
compute agenda for calendar cursor date c
show phases of the moon M
show sunrise/sunset times S
show holidays H
convert date to other calendars C
**** Quit and Exit
quit agenda, remove agenda buffer q
exit agenda, remove all agenda buffers x
** Agenda Files
The variable org-agenda-files controls which files are used for
agenda display.
- if it is a directory, all files matched by
org-agenda-files-regexp are included
- a list of files may be stored in a file:
org-agenda-files is then the name of a single file.
- the variable can be customized
The variable 'org-agenda-files' may be maintained through the following
commands:
add/move current file to front of agenda C-c [
remove current file from your agenda C-c ]
cycle through agenda file list C-, / C-'
set/remove restriction lock 5 C-c C-x </>
** Agenda Files Maintenance
The variable 'org-agenda-files' may be maintained through the following
commands:
add/move current file to front of agenda C-c [
remove current file from your agenda C-c ]
cycle through agenda file list C-, / C-'
set restriction lock C-c C-x <
remove restriction lock C-c C-x >
** The Agenda Dispatcher
(assuming C-c a is the Agenda Dispatcher, the following are
suggested bindings)
restrict agenda command to current buffer C-c a < (then character)
C-c a < <
If there is an active region, restrict the following agenda
command to the region. Otherwise, restrict it to the
current subtree2. After pressing < <, you still
need to press the character selecting the command.
compile agenda for the current week C-c a a
compile global TODO list C-c a t
compile TODO list for specific keyword C-c a T
match tags, TODO kwds, properties C-c a m
match only in TODO entries C-c a M
show timeline view of current org file C-c a L
(time-sorted view)
match boolean expression C-c a s
configure custom commands C-c a C
search agenda files for regular expression C-c a /
find stuck projects C-c a # ; C-c a !
restrict agenda command to current buffer C-c a < (then character)
agenda for date at cursor C-c C-o
*** From org-agenda.el
a Call `org-agenda-list' to display the agenda for current day or week.
t Call `org-todo-list' to display the global todo list.
T Call `org-todo-list' to display the global todo list, select only
entries with a specific TODO keyword (the user gets a prompt).
m Call `org-tags-view' to display headlines with tags matching
a condition (the user is prompted for the condition).
M Like `m', but select only TODO entries, no ordinary headlines.
L Create a timeline for the current buffer.
e Export views to associated files.
s Search entries for keywords.
/ Multi occur accros all agenda files and also files listed
in `org-agenda-text-search-extra-files'.
< Restrict agenda commands to buffer, subtree, or region.
Press several times to get the desired effect.
> Remove a previous restriction.
# List \"stuck\" projects.
! Configure what \"stuck\" means.
C Configure custom agenda commands.
*** Keyword search
boolean search by keyword of files C-c a s
(searches all files in `org-agenda-text-search-extra-files')
** TODO [#B] Agenda Commands (available in agenda buffer)
*** MORE:
- C-x C-s ? org-agenda-Schedule
**** View Org file :errors:
show original location of item SPC/mouse-3
show and recenter window L
goto original location in other window TAB/mouse-2/mouse-1
goto original location, delete other windows RET
show subtree in indirect buffer, ded. frame b X
toggle follow-mode F
**** Change display
delete other windows o
switch to day/week/month/year view d w m y
Toggle inclusion of diary entries D
toggle time grid for daily schedule G
toggle display of logbook entries l
toggle inclusion of archived trees/files v / C-u v
refresh agenda buffer with any changes r / g
filter with repect to a tag /
save all org-mode buffers s
display next/previous day,week,... RIGHT/LEFT
goto today .
**** Remote Editing from Agenda
You are not allowed to edit the agenda buffer itself, but
the following commands edit it "remotely":
undo a change due to remote editing C-_
digit argument 0-9
change state of current TODO item t
kill item and source C-k
Refile entry at point C-c C-w
toggle archive tag for headline a
move subtree to _Archive Sibling_ A
archive the subtree of headline $
(to configured archive location---?file)
show tags of current headline T
(including inherited tags)
set tags for current headline/region :
set priority of current item p / ','
raise priority of current item S-UP/DOWN / +
lower priority of current item S-DOWN / -
display weighted priority of current item P
dispatcher for attachment commands C-c C-a
schedule this item C-c C-s
set deadline for this item C-c C-d
change timestamp to one day earlier/later S-LEFT/RIGHT^3
change timestamp to today >
insert new entry into diary i
***** Agenda Actions for selected items
Dispatcher for agenda actions k
[mark entry at point for action a ]
may be out of date
set deadline to date at point d
schedule to date at point s
call remember, cursor date as default r
Press 'r' afterward to see effect of action
***** Clock actions I / O / X / J
start the clock on current item I
stop the clock on current item O
cancel the clock on current item X
jump to running clock entry, other window J
*** Agenda Actions for selected items
Dispatcher for agenda actions Suggested: C-c a
mark entry at point for action a
set deadline to date at point d
schedule to date at point s
call remember, cursor date as default r
Press 'r' afterward to see effect of action
**** Clock actions in agenda
start the clock on current item I
stop the clock on current item O
cancel the clock on current item X
jump to running clock entry, other window J
*** Misc
Open link in current line C-c C-o
*** Calendar commands in agenda
find agenda cursor date in calendar c
compute agenda for calendar cursor date c
show phases ogf the moon M
show sunrise/sunset times S
show holidays H
convert date to other calendars C
*** Quit and Exit
quit agenda, remove agenda buffer q
exit agenda, remove all agenda buffers x
* Calendar and Diary Integration
Include Emacs diary entries into Org-mode agenda with:
(setq org-agenda-include-diary t)
* LaTeX and cdlatex-mode
preview LaTeX fragment C-c C-x C-l
cdlatex-mode M-x org-cdlatex-mode
(alternately use latex hook)
Expand abbreviation (cdlatex-mode) TAB
Insert/modify math symbol (cdlatex-mode) ` / '
** Features of CDLaTeX Mode
insert environment templates C-c {
expand template abbrevs TAB
list of all abbrevs: M-x cdlatex-command-help
super- / subscripts ^ / _
math macros backquote (`) and char
(help pops up 1.5 sec after "`" is entered)
modify symbol before char, or font quote (') and char
(help pops up 1.5 sec after "'" is entered)
* [[info:org:Exporting][Exporting]] and [[info:org:Publishing][Publishing]] C-c C-e
Exporting creates files with extensions .txt and .html
in the current directory. Publishing puts the resulting file
into some other place.
export/publish dispatcher C-c C-e
export visible part only C-c C-e v
insert template of export options C-c C-x t
toggle fixed width for entry or region C-c :
** Keyboard shortcuts for typing certain structures
(from org-structure-template-alist)
Type any of these on an empty line, followed by <TAB>
- <s #+begin_src / #+end_src
- <e #+begin_example /#+end_example
- <q #+begin_quote / #+end_quote
- <v #+begin_verse / #+end_verse
- <l #+begin_latex / #+end_latex
- <L #+latex:
- HTML Export:
- <h #+begin_html / #+end_html
- <H #+html:
-
- <a #+begin_ascii / #+end_ascii"
- <A #+ascii:
- <i #+include %file
** Commonly used setups for LaTeX export
Set Title:
#+TITLE: This is the title of the document
(For subtrees, property EXPORT_TITLE takes precedence)
Number of Levels as sections: #+OPTIONS: H:4
TOC examples #+OPTIONS: toc:2 , or #+OPTIONS: toc:nil
Include files: [[info:org:Include%20files][Link to info docs]]
** Export Options C-c C-e t
`C-c C-e t' Insert template with export options, see example below.
#+TITLE: the title to be shown (default is the buffer name)
#+AUTHOR: the author (default taken from `user-full-name')
#+DATE: A date, fixed, of a format string for `format-time-string'
#+EMAIL: his/her email address (default from `user-mail-address')
#+LANGUAGE: language for HTML, e.g. `en' (`org-export-default-language')
#+TEXT: Some descriptive text to be inserted at the beginning.
#+TEXT: Several lines may be given.
#+OPTIONS: H:2 num:t toc:t \n:nil @:t ::t |:t ^:t f:t TeX:t ...
#+LINK_UP: the ``up'' link of an exported page
#+LINK_HOME: the ``home'' link of an exported page
#+EXPORT_SELECT_TAGS: Tags that select a tree for export
#+EXPORT_EXCLUDE_TAGS: Tags that exclude a tree from export
#+ATTR_LaTeX: Attributes (tbl, figure) example: 'align=rrlp{2cm}lrl'
#+ATTR_HTML: Attributes
#+LaTeX_HEADER: <any optoin from preamble>
The OPTIONS line is a compact(1) form to specify export settings. Here
you can:
H: set the number of headline levels for export
num: turn on/off section-numbers
toc: turn on/off table of contents, or set level limit (integer)
\n: turn on/off line-break-preservation
@: turn on/off quoted HTML tags
:: turn on/off fixed-width sections
|: turn on/off tables
^: turn on/off TeX-like syntax for sub- and superscripts. If
you write "^:{}", `a_{b}' will be interpreted, but
the simple `a_b' will be left as it is.
-: turn on/off conversion of special strings.
f: turn on/off footnotes like this[1].
todo: turn on/off inclusion of TODO keywords into exported text
pri: turn on/off priority cookies
tags: turn on/off inclusion of tags, may also be `not-in-toc'
<: turn on/off inclusion of any time/date stamps like DEADLINES
*: turn on/off emphasized text (bold, italic, underlined)
TeX: turn on/off simple TeX macros in plain text
LaTeX: turn on/off LaTeX fragments
skip: turn on/off skipping the text before the first heading
author: turn on/off inclusion of author name/email into exported file
creator: turn on/off inclusion of creator info into exported file
timestamp: turn on/off inclusion creation time into exported file
d: turn on/off inclusion of drawers
These options take effect in both the HTML and LaTeX export, except
for `TeX' and `LaTeX', which are respectively `t' and `nil' for the
LaTeX export.
When exporting only a single subtree by selecting it with `C-c @'
before calling an export command, the subtree can overrule some of
the file's export settings with properties `EXPORT_FILE_NAME',
`EXPORT_TITLE', `EXPORT_TEXT', and `EXPORT_OPTIONS'.
** Comments: Text not being exported
Text before the first headline is not considered part of the
document and is therefore never exported.
Lines starting with # are comments and are not exported.
Subtrees whose header starts with COMMENT are never exported.
toggle COMMENT keyword on entry C-c ;
** Dynamic Blocks
update dynamic block at point C-c C-x C-u
update all dynamic blocks C-u C-c C-x C-u
* [[info:org:Literal%20examples][Literal Examples]] (set in monospace when exported)
- Example
#+BEGIN_EXAMPLE
<Example>
#+END_EXAMPLE
- Source code
#+BEGIN_SRC <language>
<code>
#+END_SRC
- To edit in the major mode for specified language:
- start editing \C-' on the #+BEGIN line
- end editing \C-'
Shortcut: On an empty line, insert "<e" and then type TAB.
Link to [[*Shortcuts%20for%20typing%20structures][shortcuts]] for other "templates"
* [[info:org:Drawers][Drawers]]
** Drawer example
** This is a headline
Still outside the drawer
:DRAWERNAME:
This is inside the drawer.
:END:
After the drawer.
** Org-drawers configuration
- configured with the variable `org-drawers
- per file drawer configuration:
`#+DRAWERS: HIDDEN PROPERTIES S
* [[info:org:Footnotes][Footnotes]] (Info Manual: [[info:org:Footnotes][info: Footnotes]]
** Writing Footnotes
*** Variable: org-footnote-define-inline
- Default :: nil (footnotes in special section at end)
- Available *in-buffer settings*:
- #+STARTUP: fninline
- #+STARTUP: nofninline
*** Entry for Footnotes
- Numeric: [1]
- Named reference: [fn:name]
- Definition [fn::Definition here]
- Inline [fn:name:Definition]
- Secondary, etc. references [fn:name] (to same definition)
** C-c C-x f Footnote Action Command
- If cursor is on a footnote reference, jump to definition.
4. Reiterating, perhaps:
1. - If cursor is at a definition, jump to the (first) reference.
- Otherwise, create a new footnote.
Depending on the variable `org-footnote-define-inline'
definitions are placed locally, or into the nearest outline
section with heading `Footnotes'. If such a section is
not found after the reference point, one will be created at the end
of the file. When this command is called with a prefix argument,
a menu of additional options is offered:
- With prefix argument: C-u C-c C-x f
s Sort footnote definitions by reference sequence.
n Normalize footnotes---collect definitions into a special
section and number in sequence (incl. inline definitions)
- The references will then also be numbers.
Meant as the final step before finishing a
document (e.g. sending off an email).
- Exporters do this automatically,
- so could something like `message-send-hook'
d Delete the footnote at point, and all references to it.
** C-c C-c
- On footnote reference, jump to definition
- On definition, jump back to the reference.
- C-u C-c C-c: Both locations offer menu of `C-u C-c C-x f'
** To use footnotes outside Org-mode
Set org-footnote-action to a global key like C-c f
* [[ignfo:org:Attachments][Attachments]] C-c C-a
- Set *attachment directory* for entry: C-c C-a s
- Set *inheritance* for children C-c C-a i
- Attachments *Dispatcher* Commands: C-c C-a
*VARIABLE:* org-attach-method org-attach-method determines how
attachments are handled (copied, moved, or hard-linked.)
secondary keys to select commands:
a Select file and move to the task's attachment directory.
(see variable 'org-attach-method')
c/m/l Attach a file using the copy/move/link method.
n Create a new attachment as an Emacs buffer.
z Sync current task with its attachment directory, in case
you added attachments yourself.
o Open current task's attachment. If there are more than one,
prompt for a file name first.
O Like 'o', opens the attachment, forcing opening the file in Emacs.
f Open the current task's attachment directory.
F Like 'f-, but open the directory in Emacs dired.
d Select and delete a single attachment.
[D Delete all of a task's attachments. A safer way is to open the
directory in dired and delete from there.]
#+STARTUP: folded
* Remember Templates
* Symbol Table: See [[http://orgmode.org/worg/org-tutorials/org-publish-html-tutorial.php#sec-9][This Link]] on Work
Symbol Org
\nbsp
¡ \iexcl
¢ \cent
£ \pound
¤ \curren
¥ \yen
¦ \brvbar
| \vert
§ \sect
¨ \uml
© \copy
ª \ordf
« \laquo
¬ \not
\shy
® \reg
¯ \macr
° \deg
± \plusmn
⊃2 \sup2
⊃3 \sup3
´ \acute
µ \micro
¶ \para
· \middot
o \odot
* \star
¸ \cedil
⊃1 \sup1
º \ordm
» \raquo
\frac14 \frac14
\frac12 \frac12
\frac34 \frac34
¿ \iquest
\Agrav \Agrav
\Aacut \Aacut
 \Acirc
\Atild \Atild
Ä \Auml
Å \Aring \AA
Æ \AElig
Ç \Ccedil
È \Egrave
É \Eacute
Ê \Ecirc
Ë \Euml
Ì \Igrave
Í \Iacute
Î \Icirc
Ï \Iuml
Ð \ETH
Ñ \Ntilde
Ò \Ograve
Ó \Oacute
Ô \Ocirc
Õ \Otilde
Ö \Ouml
× \times
Ø \Oslash
Ù \Ugrave
Ú \Uacute
Û \Ucirc
Ü \Uuml
Ý \Yacute
Þ \THORN
ß \szlig
à \agrave
á \aacute
â \acirc
ã \atilde
ä \auml
å \aring
æ \aelig
ç \ccedil
è \egrave
é \eacute
ê \ecirc
ë \euml
ì \igrave
í \iacute
î \icirc
ï \iuml
ð \eth
ñ \ntilde
ò \ograve
ó \oacute
ô \ocirc
õ \otilde
ö \ouml
÷ \divide
ø \oslash
ù \ugrave
ú \uacute
û \ucirc
ü \uuml
ý \yacute
þ \thorn
ÿ \yuml
ƒ \fnof
Α \Alpha
Β \Beta
Γ \Gamma
Δ \Delta
Ε \Epsilon
Ζ \Zeta
Η \Eta
Θ \Theta
Ι \Iota
Κ \Kappa
Λ \Lambda
Μ \Mu
Ν \Nu
Ξ \Xi
Ο \Omicron
Π \Pi
Ρ \Rho
Σ \Sigma
Τ \Tau
Υ \Upsilon
Φ \Phi
Χ \Chi
Ψ \Psi
Ω \Omega
α \alpha
β \beta
γ \gamma
δ \delta
ε \epsilon
ε \varepsilon
ζ \zeta
η \eta
θ \theta
ι \iota
κ \kappa
λ \lambda
μ \mu
ν \nu
ξ \xi
ο \omicron
π \pi
ρ \rho
ς \sigmaf \varsigma
σ \sigma
τ \tau
υ \upsilon
φ \phi
χ \chi
ψ \psi
ω \omega
ϑ \thetasym \vartheta
ϒ \upsih
ϖ \piv
• \bull \bullet
… \hellip \dots
′ \prime
″ \Prime
‾ \oline
⁄ \frasl
℘ \weierp
ℑ \image
ℜ \real
™ \trade
ℵ \alefsym
← \larr
↑ \uarr
→ \rarr
↓ \darr
↔ \harr
↵ \crarr
⇐ \lArr
⇑ \uArr
⇒ \rArr
⇓ \dArr
⇔ \hArr
∀ \forall
∂ \part
∃ \exist
∅ \empty
∇ \nabla
∈ \isin
∉ \notin
∋ \ni
∏ \prod
∑ \sum
− \minus
∗ \lowast
√ \radic
∝ \prop
∞ \infin
∠ \ang
∧ \and
∨ \or
∩ \cap
∪ \cup
∫ \int
\there4 \there4
∼ \sim
≅ \cong
≈ \asymp
≠ \ne
≡ \equiv
≤ \le
≥ \ge
⊂ \sub
⊃ \sup
⊄ \nsub
⊆ \sube
⊇ \supe
⊕ \oplus
⊗ \otimes
⊥ \perp
⋅ \sdot
⌈ \lceil
⌉ \rceil
⌊ \lfloor
⌋ \rfloor
〈 \lang
〉 \rang
◊ \loz
♠ \spades
♣ \clubs
♥ \hearts
♦ \diams
☺ \smile
" \quot
& \amp
< \lt
> \gt
Π\OElig
œ \oelig
Š \Scaron
š \scaron
Ÿ \Yuml
ˆ \circ
˜ \tilde
\ensp
\emsp
\thinsp
\zwnj
\zwj
\lrm
\rlm
– \ndash
— \mdash
‘ \lsquo
’ \rsquo
‚ \sbquo
“ \ldquo
” \rdquo
„ \bdquo
† \dagger
‡ \Dagger
‰ \permil
‹ \lsaquo
› \rsaquo
€ \euro
arccos \arccos
arcsin \arcsin
arctan \arctan
arg \arg
cos \cos
cosh \cosh
cot \cot
coth \coth
csc \csc
° \deg
det \det
dim \dim
exp \exp
gcd \gcd
hom \hom
inf \inf
ker \ker
lg \lg
lim \lim
liminf \liminf
limsup \limsup
ln \ln
log \log
max \max
min \min
Pr \Pr
sec \sec
sin \sin
sinh \sinh
⊃ \sup
tan \tan
tanh \tanh
* unneeded? (my own, largely duplicates from [[*Commonly%20used%20setups%20for%20LaTeX%20export][above]])
** Customizing LaTeX Export
CLOSED: [2009-03-20 Fri 21:21]
- Tabular alignments
- #+ATTR_LaTeX: align=rrlp{2cm}lrl
- Image (options for *includegraphics* macro)
,----
| #+CAPTION: The black-body emission of the disk around HR 4049
| #+LABEL: fig:SED-HR4049
| #+ATTR_LaTeX: width=5cm,angle=90
| [[./img/sed-hr4049.pdf]]
`----
- Quote:
,----
| #+BEGIN_QUOTE |
| <quote> |
| #+END_QUOTE |
`----
- Just write the LaTeX code:
,----
| \begin{figure}[!tpb]
| \centerline{
| \includegraphics[scale=0.3]{images/BeerPlot}
| }\caption{This is plot looks like a beer.}\label{fig:Beer}
| \end{figure}
`----
- See this blog post: [[http://www.mfasold.net/blog/2009/02/using-emacs-org-mode-to-draft-papers/][Using Emacs Org-Mode to Draft Papers]]
[-- Attachment #3: Type: text/plain, Size: 201 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 11+ messages in thread