emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Correct babel format for ditaa?
@ 2010-07-21 21:28 John Hendy
  2010-07-21 21:57 ` Eric Schulte
  0 siblings, 1 reply; 6+ messages in thread
From: John Hendy @ 2010-07-21 21:28 UTC (permalink / raw)
  To: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 969 bytes --]

Hi,


I have been having a difficult time with an export (which includes a ditaa
graphic) to PDF via LaTeX recently and am puzzled by it. Which is the
correct format?

1) Supported by:
- http://doc.norang.ca/org-mode.html#playingwithditaa
- http://orgmode.org/Changes.html#ob-configuration-changes (indirectly seems
to indicate this format?)

#+begin_src ditaa :file file.png :cmdline -r -S -s 2.5
---
Picture here
---
#+end_src


2) Supported by:
- http://orgmode.org/worg/org-contrib/org-exp-blocks.php
-
http://emacs-fu.blogspot.com/2009/10/writing-presentations-with-org-mode-and.html

#+begin_ditaa file.png -r -S -s 2.5
---
Picture here
---
#+end_ditaa

Only #2 is working for me currently, though I suspect that #1 is the 'truer'
form? Not sure what's going on...


Thanks,
John

P.S. Is there a way to enlarge the output? Using the -s option only seems to
make the resolution higher, not change the actual size (inches, pixels,
whatever) in the LaTeX output...

[-- Attachment #1.2: Type: text/html, Size: 1928 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Correct babel format for ditaa?
  2010-07-21 21:28 Correct babel format for ditaa? John Hendy
@ 2010-07-21 21:57 ` Eric Schulte
  2010-07-21 22:07   ` John Hendy
  0 siblings, 1 reply; 6+ messages in thread
From: Eric Schulte @ 2010-07-21 21:57 UTC (permalink / raw)
  To: John Hendy; +Cc: emacs-orgmode

Hi John,

Yes, (1) below is the preferred format, however the "ditaa" language is
not enabled by default.  Please customize the org-babel-load-languages
variable to enable support for evaluating ditaa code blocks, and then
try the code block syntax mentioned in (1) below again and a ditaa
figure should be successfully exported.

A benefit of the (1) (aka Babel) method below is that code blocks can be
evaluated "live" from inside the Org-mode buffer with C-c C-c.  See
Chapter 14 of the manual or the relevant portion of the quick guide
http://orgmode.org/guide/Working-With-Source-Code.html for more
information on using Babel.

Best -- Eric

John Hendy <jw.hendy@gmail.com> writes:

> Hi,
>
>
> I have been having a difficult time with an export (which includes a ditaa
> graphic) to PDF via LaTeX recently and am puzzled by it. Which is the
> correct format?
>
> 1) Supported by:
> - http://doc.norang.ca/org-mode.html#playingwithditaa
> - http://orgmode.org/Changes.html#ob-configuration-changes (indirectly seems
> to indicate this format?)
>
> #+begin_src ditaa :file file.png :cmdline -r -S -s 2.5
> ---
> Picture here
> ---
> #+end_src
>
>
> 2) Supported by:
> - http://orgmode.org/worg/org-contrib/org-exp-blocks.php
> -
> http://emacs-fu.blogspot.com/2009/10/writing-presentations-with-org-mode-and.html
>
> #+begin_ditaa file.png -r -S -s 2.5
> ---
> Picture here
> ---
> #+end_ditaa
>
> Only #2 is working for me currently, though I suspect that #1 is the 'truer'
> form? Not sure what's going on...
>
>
> Thanks,
> John
>
> P.S. Is there a way to enlarge the output? Using the -s option only seems to
> make the resolution higher, not change the actual size (inches, pixels,
> whatever) in the LaTeX output...
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Correct babel format for ditaa?
  2010-07-21 21:57 ` Eric Schulte
@ 2010-07-21 22:07   ` John Hendy
  2010-07-21 22:22     ` Eric Schulte
  0 siblings, 1 reply; 6+ messages in thread
From: John Hendy @ 2010-07-21 22:07 UTC (permalink / raw)
  To: Eric Schulte; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 2716 bytes --]

Thanks Eric... I should have included that my .emacs file has the following
(which I followed from here:
http://orgmode.org/Changes.html#ob-configuration-changes):

;; setup ditaa
(setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
(org-babel-do-load-languages
 'org-babel-load-languages
 '((ditaa . t)
   (gnuplot . t)))
(require 'ob-ditaa)

If I understand correctly, the (ditaa . t) and (require 'ob-ditaa) are
redundant but since it wasn't working, I tried both. Is this what I need to
have babel work with ditaa?

Thanks for any input...
John

On Wed, Jul 21, 2010 at 4:57 PM, Eric Schulte <schulte.eric@gmail.com>wrote:

> Hi John,
>
> Yes, (1) below is the preferred format, however the "ditaa" language is
> not enabled by default.  Please customize the org-babel-load-languages
> variable to enable support for evaluating ditaa code blocks, and then
> try the code block syntax mentioned in (1) below again and a ditaa
> figure should be successfully exported.
>
> A benefit of the (1) (aka Babel) method below is that code blocks can be
> evaluated "live" from inside the Org-mode buffer with C-c C-c.  See
> Chapter 14 of the manual or the relevant portion of the quick guide
> http://orgmode.org/guide/Working-With-Source-Code.html for more
> information on using Babel.
>
> Best -- Eric
>
> John Hendy <jw.hendy@gmail.com> writes:
>
> > Hi,
> >
> >
> > I have been having a difficult time with an export (which includes a
> ditaa
> > graphic) to PDF via LaTeX recently and am puzzled by it. Which is the
> > correct format?
> >
> > 1) Supported by:
> > - http://doc.norang.ca/org-mode.html#playingwithditaa
> > - http://orgmode.org/Changes.html#ob-configuration-changes (indirectly
> seems
> > to indicate this format?)
> >
> > #+begin_src ditaa :file file.png :cmdline -r -S -s 2.5
> > ---
> > Picture here
> > ---
> > #+end_src
> >
> >
> > 2) Supported by:
> > - http://orgmode.org/worg/org-contrib/org-exp-blocks.php
> > -
> >
> http://emacs-fu.blogspot.com/2009/10/writing-presentations-with-org-mode-and.html
> >
> > #+begin_ditaa file.png -r -S -s 2.5
> > ---
> > Picture here
> > ---
> > #+end_ditaa
> >
> > Only #2 is working for me currently, though I suspect that #1 is the
> 'truer'
> > form? Not sure what's going on...
> >
> >
> > Thanks,
> > John
> >
> > P.S. Is there a way to enlarge the output? Using the -s option only seems
> to
> > make the resolution higher, not change the actual size (inches, pixels,
> > whatever) in the LaTeX output...
> > _______________________________________________
> > Emacs-orgmode mailing list
> > Please use `Reply All' to send replies to the list.
> > Emacs-orgmode@gnu.org
> > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>

[-- Attachment #1.2: Type: text/html, Size: 4295 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Correct babel format for ditaa?
  2010-07-21 22:07   ` John Hendy
@ 2010-07-21 22:22     ` Eric Schulte
  2010-07-22  1:06       ` John Hendy
  0 siblings, 1 reply; 6+ messages in thread
From: Eric Schulte @ 2010-07-21 22:22 UTC (permalink / raw)
  To: John Hendy; +Cc: emacs-orgmode

Hi John,

Yes the following should be sufficient

;; setup ditaa
(setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
(org-babel-do-load-languages
 'org-babel-load-languages
 '((ditaa . t)
   (gnuplot . t)))


What happens if you try to evaluate the following in an Org-mode buffer
with C-c C-c?

#+begin_src ditaa :file example.png
  +---------------+
  |               |
  | ditaa example |
  |               |
  +---------------+
#+end_src

Best -- Eric

John Hendy <jw.hendy@gmail.com> writes:

> Thanks Eric... I should have included that my .emacs file has the following
> (which I followed from here:
> http://orgmode.org/Changes.html#ob-configuration-changes):
>
> ;; setup ditaa
> (setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
> (org-babel-do-load-languages
>  'org-babel-load-languages
>  '((ditaa . t)
>    (gnuplot . t)))
> (require 'ob-ditaa)
>
> If I understand correctly, the (ditaa . t) and (require 'ob-ditaa) are
> redundant but since it wasn't working, I tried both. Is this what I need to
> have babel work with ditaa?
>
> Thanks for any input...
> John
>
> On Wed, Jul 21, 2010 at 4:57 PM, Eric Schulte <schulte.eric@gmail.com>wrote:
>
>> Hi John,
>>
>> Yes, (1) below is the preferred format, however the "ditaa" language is
>> not enabled by default.  Please customize the org-babel-load-languages
>> variable to enable support for evaluating ditaa code blocks, and then
>> try the code block syntax mentioned in (1) below again and a ditaa
>> figure should be successfully exported.
>>
>> A benefit of the (1) (aka Babel) method below is that code blocks can be
>> evaluated "live" from inside the Org-mode buffer with C-c C-c.  See
>> Chapter 14 of the manual or the relevant portion of the quick guide
>> http://orgmode.org/guide/Working-With-Source-Code.html for more
>> information on using Babel.
>>
>> Best -- Eric
>>
>> John Hendy <jw.hendy@gmail.com> writes:
>>
>> > Hi,
>> >
>> >
>> > I have been having a difficult time with an export (which includes a
>> ditaa
>> > graphic) to PDF via LaTeX recently and am puzzled by it. Which is the
>> > correct format?
>> >
>> > 1) Supported by:
>> > - http://doc.norang.ca/org-mode.html#playingwithditaa
>> > - http://orgmode.org/Changes.html#ob-configuration-changes (indirectly
>> seems
>> > to indicate this format?)
>> >
>> > #+begin_src ditaa :file file.png :cmdline -r -S -s 2.5
>> > ---
>> > Picture here
>> > ---
>> > #+end_src
>> >
>> >
>> > 2) Supported by:
>> > - http://orgmode.org/worg/org-contrib/org-exp-blocks.php
>> > -
>> >
>> http://emacs-fu.blogspot.com/2009/10/writing-presentations-with-org-mode-and.html
>> >
>> > #+begin_ditaa file.png -r -S -s 2.5
>> > ---
>> > Picture here
>> > ---
>> > #+end_ditaa
>> >
>> > Only #2 is working for me currently, though I suspect that #1 is the
>> 'truer'
>> > form? Not sure what's going on...
>> >
>> >
>> > Thanks,
>> > John
>> >
>> > P.S. Is there a way to enlarge the output? Using the -s option only seems
>> to
>> > make the resolution higher, not change the actual size (inches, pixels,
>> > whatever) in the LaTeX output...
>> > _______________________________________________
>> > Emacs-orgmode mailing list
>> > Please use `Reply All' to send replies to the list.
>> > Emacs-orgmode@gnu.org
>> > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Correct babel format for ditaa?
  2010-07-21 22:22     ` Eric Schulte
@ 2010-07-22  1:06       ` John Hendy
  2010-07-22 21:34         ` John Hendy
  0 siblings, 1 reply; 6+ messages in thread
From: John Hendy @ 2010-07-22  1:06 UTC (permalink / raw)
  To: Eric Schulte; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 4190 bytes --]

That works as does the attempt on my *home* computer. I was at work earlier.
I'm truly perplexed as from memory I just cannot think of anything different
between the home and work .emacs files that would do this. I want to go back
and look at the load languages section from the work one, though, as I got
the same error at home prior to adding that section. I'm wondering if I have
a typo somewhere (though I did copy and paste what's below so just not
sure!).

I'll try again and post back tomorrow. I truly appreciate the help.

John

On Wed, Jul 21, 2010 at 10:22 PM, Eric Schulte <schulte.eric@gmail.com>wrote:

> Hi John,
>
> Yes the following should be sufficient
>
> ;; setup ditaa
> (setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
> (org-babel-do-load-languages
>  'org-babel-load-languages
>  '((ditaa . t)
>   (gnuplot . t)))
>
>
> What happens if you try to evaluate the following in an Org-mode buffer
> with C-c C-c?
>
> #+begin_src ditaa :file example.png
>  +---------------+
>  |               |
>  | ditaa example |
>  |               |
>  +---------------+
> #+end_src
>
> Best -- Eric
>
> John Hendy <jw.hendy@gmail.com> writes:
>
> > Thanks Eric... I should have included that my .emacs file has the
> following
> > (which I followed from here:
> > http://orgmode.org/Changes.html#ob-configuration-changes):
> >
> > ;; setup ditaa
> > (setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
> > (org-babel-do-load-languages
> >  'org-babel-load-languages
> >  '((ditaa . t)
> >    (gnuplot . t)))
> > (require 'ob-ditaa)
> >
> > If I understand correctly, the (ditaa . t) and (require 'ob-ditaa) are
> > redundant but since it wasn't working, I tried both. Is this what I need
> to
> > have babel work with ditaa?
> >
> > Thanks for any input...
> > John
> >
> > On Wed, Jul 21, 2010 at 4:57 PM, Eric Schulte <schulte.eric@gmail.com
> >wrote:
> >
> >> Hi John,
> >>
> >> Yes, (1) below is the preferred format, however the "ditaa" language is
> >> not enabled by default.  Please customize the org-babel-load-languages
> >> variable to enable support for evaluating ditaa code blocks, and then
> >> try the code block syntax mentioned in (1) below again and a ditaa
> >> figure should be successfully exported.
> >>
> >> A benefit of the (1) (aka Babel) method below is that code blocks can be
> >> evaluated "live" from inside the Org-mode buffer with C-c C-c.  See
> >> Chapter 14 of the manual or the relevant portion of the quick guide
> >> http://orgmode.org/guide/Working-With-Source-Code.html for more
> >> information on using Babel.
> >>
> >> Best -- Eric
> >>
> >> John Hendy <jw.hendy@gmail.com> writes:
> >>
> >> > Hi,
> >> >
> >> >
> >> > I have been having a difficult time with an export (which includes a
> >> ditaa
> >> > graphic) to PDF via LaTeX recently and am puzzled by it. Which is the
> >> > correct format?
> >> >
> >> > 1) Supported by:
> >> > - http://doc.norang.ca/org-mode.html#playingwithditaa
> >> > - http://orgmode.org/Changes.html#ob-configuration-changes(indirectly
> >> seems
> >> > to indicate this format?)
> >> >
> >> > #+begin_src ditaa :file file.png :cmdline -r -S -s 2.5
> >> > ---
> >> > Picture here
> >> > ---
> >> > #+end_src
> >> >
> >> >
> >> > 2) Supported by:
> >> > - http://orgmode.org/worg/org-contrib/org-exp-blocks.php
> >> > -
> >> >
> >>
> http://emacs-fu.blogspot.com/2009/10/writing-presentations-with-org-mode-and.html
> >> >
> >> > #+begin_ditaa file.png -r -S -s 2.5
> >> > ---
> >> > Picture here
> >> > ---
> >> > #+end_ditaa
> >> >
> >> > Only #2 is working for me currently, though I suspect that #1 is the
> >> 'truer'
> >> > form? Not sure what's going on...
> >> >
> >> >
> >> > Thanks,
> >> > John
> >> >
> >> > P.S. Is there a way to enlarge the output? Using the -s option only
> seems
> >> to
> >> > make the resolution higher, not change the actual size (inches,
> pixels,
> >> > whatever) in the LaTeX output...
> >> > _______________________________________________
> >> > Emacs-orgmode mailing list
> >> > Please use `Reply All' to send replies to the list.
> >> > Emacs-orgmode@gnu.org
> >> > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
> >>
>

[-- Attachment #1.2: Type: text/html, Size: 6416 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread
* Re: Correct babel format for ditaa?
  2010-07-22  1:06       ` John Hendy
@ 2010-07-22 21:34         ` John Hendy
  0 siblings, 0 replies; 6+ messages in thread
From: John Hendy @ 2010-07-22 21:34 UTC (permalink / raw)
  To: Eric Schulte; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 4967 bytes --]

I'm at a loss... I tried the minimal config and it worked... then I compared
it to my normal config and didn't see anything wrong so I tried it there and
it also worked. I did change the current figure from #+begin_ditaa to
#+begin_src ditaa... maybe I had a typo somewhere before?

I literally have no idea what happened. Maybe I changed something last night
before I left with my config but never re-ran things one final time?

Thanks for the help! Sorry I can't provide a better specific resolution to
the problem for future inquirers!


John

On Wed, Jul 21, 2010 at 8:06 PM, John Hendy <jw.hendy@gmail.com> wrote:

> That works as does the attempt on my *home* computer. I was at work
> earlier. I'm truly perplexed as from memory I just cannot think of anything
> different between the home and work .emacs files that would do this. I want
> to go back and look at the load languages section from the work one, though,
> as I got the same error at home prior to adding that section. I'm wondering
> if I have a typo somewhere (though I did copy and paste what's below so just
> not sure!).
>
> I'll try again and post back tomorrow. I truly appreciate the help.
>
> John
>
>
> On Wed, Jul 21, 2010 at 10:22 PM, Eric Schulte <schulte.eric@gmail.com>wrote:
>
>> Hi John,
>>
>> Yes the following should be sufficient
>>
>> ;; setup ditaa
>> (setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
>> (org-babel-do-load-languages
>>  'org-babel-load-languages
>>  '((ditaa . t)
>>   (gnuplot . t)))
>>
>>
>> What happens if you try to evaluate the following in an Org-mode buffer
>> with C-c C-c?
>>
>> #+begin_src ditaa :file example.png
>>  +---------------+
>>  |               |
>>  | ditaa example |
>>  |               |
>>  +---------------+
>> #+end_src
>>
>> Best -- Eric
>>
>> John Hendy <jw.hendy@gmail.com> writes:
>>
>> > Thanks Eric... I should have included that my .emacs file has the
>> following
>> > (which I followed from here:
>> > http://orgmode.org/Changes.html#ob-configuration-changes):
>> >
>> > ;; setup ditaa
>> > (setq org-ditaa-jar-path "~/.elisp/org.git/contrib/scripts/ditaa.jar")
>> > (org-babel-do-load-languages
>> >  'org-babel-load-languages
>> >  '((ditaa . t)
>> >    (gnuplot . t)))
>> > (require 'ob-ditaa)
>> >
>> > If I understand correctly, the (ditaa . t) and (require 'ob-ditaa) are
>> > redundant but since it wasn't working, I tried both. Is this what I need
>> to
>> > have babel work with ditaa?
>> >
>> > Thanks for any input...
>> > John
>> >
>> > On Wed, Jul 21, 2010 at 4:57 PM, Eric Schulte <schulte.eric@gmail.com
>> >wrote:
>> >
>> >> Hi John,
>> >>
>> >> Yes, (1) below is the preferred format, however the "ditaa" language is
>> >> not enabled by default.  Please customize the org-babel-load-languages
>> >> variable to enable support for evaluating ditaa code blocks, and then
>> >> try the code block syntax mentioned in (1) below again and a ditaa
>> >> figure should be successfully exported.
>> >>
>> >> A benefit of the (1) (aka Babel) method below is that code blocks can
>> be
>> >> evaluated "live" from inside the Org-mode buffer with C-c C-c.  See
>> >> Chapter 14 of the manual or the relevant portion of the quick guide
>> >> http://orgmode.org/guide/Working-With-Source-Code.html for more
>> >> information on using Babel.
>> >>
>> >> Best -- Eric
>> >>
>> >> John Hendy <jw.hendy@gmail.com> writes:
>> >>
>> >> > Hi,
>> >> >
>> >> >
>> >> > I have been having a difficult time with an export (which includes a
>> >> ditaa
>> >> > graphic) to PDF via LaTeX recently and am puzzled by it. Which is the
>> >> > correct format?
>> >> >
>> >> > 1) Supported by:
>> >> > - http://doc.norang.ca/org-mode.html#playingwithditaa
>> >> > - http://orgmode.org/Changes.html#ob-configuration-changes(indirectly
>> >> seems
>> >> > to indicate this format?)
>> >> >
>> >> > #+begin_src ditaa :file file.png :cmdline -r -S -s 2.5
>> >> > ---
>> >> > Picture here
>> >> > ---
>> >> > #+end_src
>> >> >
>> >> >
>> >> > 2) Supported by:
>> >> > - http://orgmode.org/worg/org-contrib/org-exp-blocks.php
>> >> > -
>> >> >
>> >>
>> http://emacs-fu.blogspot.com/2009/10/writing-presentations-with-org-mode-and.html
>> >> >
>> >> > #+begin_ditaa file.png -r -S -s 2.5
>> >> > ---
>> >> > Picture here
>> >> > ---
>> >> > #+end_ditaa
>> >> >
>> >> > Only #2 is working for me currently, though I suspect that #1 is the
>> >> 'truer'
>> >> > form? Not sure what's going on...
>> >> >
>> >> >
>> >> > Thanks,
>> >> > John
>> >> >
>> >> > P.S. Is there a way to enlarge the output? Using the -s option only
>> seems
>> >> to
>> >> > make the resolution higher, not change the actual size (inches,
>> pixels,
>> >> > whatever) in the LaTeX output...
>> >> > _______________________________________________
>> >> > Emacs-orgmode mailing list
>> >> > Please use `Reply All' to send replies to the list.
>> >> > Emacs-orgmode@gnu.org
>> >> > http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>> >>
>>
>
>

[-- Attachment #1.2: Type: text/html, Size: 7504 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread
end of thread, other threads:[~2010-07-22 21:35 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-07-21 21:28 Correct babel format for ditaa? John Hendy
2010-07-21 21:57 ` Eric Schulte
2010-07-21 22:07   ` John Hendy
2010-07-21 22:22     ` Eric Schulte
2010-07-22  1:06       ` John Hendy
2010-07-22 21:34         ` John Hendy

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).