* inline images in org-mode
@ 2010-09-16 0:33 Robert Goldman
2010-09-16 12:11 ` Dan Davison
2010-09-16 12:32 ` Sebastian Rose
0 siblings, 2 replies; 9+ messages in thread
From: Robert Goldman @ 2010-09-16 0:33 UTC (permalink / raw)
To: Org Mode
I was looking for a way to put illustrations in my org-mode files so
that I could actually look at them while editing the org stuff. I found
a post a while ago suggesting using iimage mode (which is included with
the Aquamacs that I use, and is readily available if you don't have it
with your emacs).
I found I needed to do a little customization to make iimage work for
me, so I thought I would post the details in case they were useful to
anyone else.
Here's the bit I added to my org configuration to make this work:
(add-hook 'org-mode-hook
'(lambda ()
;; unnecessary
;; (make-variable-buffer-local
'iimage-mode-image-filename-regex)
(let ((file-extension-regex
(regexp-opt (nconc (mapcar #'upcase
image-file-name-extensions)
image-file-name-extensions)
t)))
(setq iimage-mode-image-regex-alist
(list
(cons
(concat
"\\[\\["
(regexp-quote "file:")
"\\([^]]+\." file-extension-regex "\\)"
"\\]"
"\\(\\[" "\\([^]]+\\)" "\\]\\)?"
"\\]")
1))))))
Note that this /only/ displays inline local (file) links, not http
images. It wouldn't be hard to add that --- I built the above by
copying and modifying the org-bracket-link-analytic-regexp variable
initialization. If one wanted to put this more generally into org-mode,
it would probably be right to make the iimage-mode-image-regex-alist be
under control of some org customization (to handle local versus all
images, etc.).
I don't generally want iimage mode on in all of my org-mode buffers, so
I use the file variables block to engage iimage mode where I want it.
If you'd like it always to be on, then you can just add iimage-mode
(it's a minor mode) to your org-mode-hook.
Hope that's of interest to someone...
Cheers,
r
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: inline images in org-mode
2010-09-16 0:33 inline images in org-mode Robert Goldman
@ 2010-09-16 12:11 ` Dan Davison
2010-09-16 12:37 ` Robert Goldman
2010-09-16 12:32 ` Sebastian Rose
1 sibling, 1 reply; 9+ messages in thread
From: Dan Davison @ 2010-09-16 12:11 UTC (permalink / raw)
To: rpgoldman; +Cc: Org Mode
Robert Goldman <rpgoldman@sift.info> writes:
> I was looking for a way to put illustrations in my org-mode files so
> that I could actually look at them while editing the org stuff. I found
> a post a while ago suggesting using iimage mode (which is included with
> the Aquamacs that I use, and is readily available if you don't have it
> with your emacs).
Hi Robert,
There's already org-display-inline-images, which iIrc uses overlays
rather than the text properties used by iimage. Does your route offer
advantages over this?
Dan
>
> I found I needed to do a little customization to make iimage work for
> me, so I thought I would post the details in case they were useful to
> anyone else.
>
> Here's the bit I added to my org configuration to make this work:
>
> (add-hook 'org-mode-hook
> '(lambda ()
> ;; unnecessary
> ;; (make-variable-buffer-local
> 'iimage-mode-image-filename-regex)
> (let ((file-extension-regex
> (regexp-opt (nconc (mapcar #'upcase
> image-file-name-extensions)
> image-file-name-extensions)
> t)))
> (setq iimage-mode-image-regex-alist
> (list
> (cons
> (concat
> "\\[\\["
> (regexp-quote "file:")
> "\\([^]]+\." file-extension-regex "\\)"
> "\\]"
> "\\(\\[" "\\([^]]+\\)" "\\]\\)?"
> "\\]")
> 1))))))
>
> Note that this /only/ displays inline local (file) links, not http
> images. It wouldn't be hard to add that --- I built the above by
> copying and modifying the org-bracket-link-analytic-regexp variable
> initialization. If one wanted to put this more generally into org-mode,
> it would probably be right to make the iimage-mode-image-regex-alist be
> under control of some org customization (to handle local versus all
> images, etc.).
>
> I don't generally want iimage mode on in all of my org-mode buffers, so
> I use the file variables block to engage iimage mode where I want it.
> If you'd like it always to be on, then you can just add iimage-mode
> (it's a minor mode) to your org-mode-hook.
>
> Hope that's of interest to someone...
>
> Cheers,
> r
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 12:11 ` Dan Davison
@ 2010-09-16 12:37 ` Robert Goldman
2010-09-16 12:48 ` Dan Davison
0 siblings, 1 reply; 9+ messages in thread
From: Robert Goldman @ 2010-09-16 12:37 UTC (permalink / raw)
To: Dan Davison; +Cc: Org Mode
On 9/16/10 Sep 16 -7:11 AM, Dan Davison wrote:
> Robert Goldman <rpgoldman@sift.info> writes:
>
>> I was looking for a way to put illustrations in my org-mode files so
>> that I could actually look at them while editing the org stuff. I found
>> a post a while ago suggesting using iimage mode (which is included with
>> the Aquamacs that I use, and is readily available if you don't have it
>> with your emacs).
>
> Hi Robert,
>
> There's already org-display-inline-images, which iIrc uses overlays
> rather than the text properties used by iimage. Does your route offer
> advantages over this?
Nope. Just didn't know it was there. It's not in the manual (if I get
a chance, I'll try to write up a patch, or maybe someone else can); the
only thing I found on inline images was about export to HTML. So then I
googled, and found the material on iimage only, not o-d-i-i.
Actually, having said that, on Aquamacs, o-d-i-i doesn't seem to work
well. For reasons I'm too ignorant to explain, o-d-i-i causes the
images to flash repeatedly, instead of simply being displayed....
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 12:37 ` Robert Goldman
@ 2010-09-16 12:48 ` Dan Davison
0 siblings, 0 replies; 9+ messages in thread
From: Dan Davison @ 2010-09-16 12:48 UTC (permalink / raw)
To: rpgoldman; +Cc: Org Mode
Robert Goldman <rpgoldman@sift.info> writes:
> On 9/16/10 Sep 16 -7:11 AM, Dan Davison wrote:
>> Robert Goldman <rpgoldman@sift.info> writes:
>>
>>> I was looking for a way to put illustrations in my org-mode files so
>>> that I could actually look at them while editing the org stuff. I found
>>> a post a while ago suggesting using iimage mode (which is included with
>>> the Aquamacs that I use, and is readily available if you don't have it
>>> with your emacs).
>>
>> Hi Robert,
>>
>> There's already org-display-inline-images, which iIrc uses overlays
>> rather than the text properties used by iimage. Does your route offer
>> advantages over this?
>
> Nope. Just didn't know it was there. It's not in the manual (if I get
> a chance, I'll try to write up a patch, or maybe someone else can);
Right, good catch. Someone needs to add it.
> the
> only thing I found on inline images was about export to HTML. So then I
> googled, and found the material on iimage only, not o-d-i-i.
>
> Actually, having said that, on Aquamacs, o-d-i-i doesn't seem to work
> well. For reasons I'm too ignorant to explain, o-d-i-i causes the
> images to flash repeatedly, instead of simply being displayed....
Hmm, I don't think this is a good guess, but if you're using
org-indent-mode does turning it off help?
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 0:33 inline images in org-mode Robert Goldman
2010-09-16 12:11 ` Dan Davison
@ 2010-09-16 12:32 ` Sebastian Rose
2010-09-16 12:41 ` Robert Goldman
1 sibling, 1 reply; 9+ messages in thread
From: Sebastian Rose @ 2010-09-16 12:32 UTC (permalink / raw)
To: rpgoldman; +Cc: Org Mode
Robert Goldman <rpgoldman@sift.info> writes:
> I was looking for a way to put illustrations in my org-mode files so
> that I could actually look at them while editing the org stuff. I found
> a post a while ago suggesting using iimage mode (which is included with
> the Aquamacs that I use, and is readily available if you don't have it
> with your emacs).
>
> I found I needed to do a little customization to make iimage work for
> me, so I thought I would post the details in case they were useful to
> anyone else.
Hi Robert,
just use `org-display-inline-images' or `org-toggle-inline-images'.
Not sure if it works with Aquamacs.
HTH
Sebastian
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 12:32 ` Sebastian Rose
@ 2010-09-16 12:41 ` Robert Goldman
2010-09-16 13:46 ` Sebastian Rose
0 siblings, 1 reply; 9+ messages in thread
From: Robert Goldman @ 2010-09-16 12:41 UTC (permalink / raw)
To: Sebastian Rose; +Cc: Org Mode
On 9/16/10 Sep 16 -7:32 AM, Sebastian Rose wrote:
> Robert Goldman <rpgoldman@sift.info> writes:
>> I was looking for a way to put illustrations in my org-mode files so
>> that I could actually look at them while editing the org stuff. I found
>> a post a while ago suggesting using iimage mode (which is included with
>> the Aquamacs that I use, and is readily available if you don't have it
>> with your emacs).
>>
>> I found I needed to do a little customization to make iimage work for
>> me, so I thought I would post the details in case they were useful to
>> anyone else.
>
>
> Hi Robert,
>
>
> just use `org-display-inline-images' or `org-toggle-inline-images'.
> Not sure if it works with Aquamacs.
Doesn't seem to (see earlier response).
Suggestion: add documentation of this to Markup>Images and tables in the
org manual? I'm still not entirely sure how to use it. Is there some
magic I can put in the Local Variables block that will cause the images
to be displayed on startup?
# org-display-inline-images: t
doesn't seem to do this --- I still needed to call o-d-i-i or o-t-i-i
even with that in the block.
I'm willing to write up the manual patch; I'm just not entirely sure
what it should say (and whether my proposed location is the right one).
best,
r
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 12:41 ` Robert Goldman
@ 2010-09-16 13:46 ` Sebastian Rose
2010-09-16 15:04 ` Robert Goldman
0 siblings, 1 reply; 9+ messages in thread
From: Sebastian Rose @ 2010-09-16 13:46 UTC (permalink / raw)
To: rpgoldman; +Cc: Org Mode
Robert Goldman <rpgoldman@sift.info> writes:
> ... Is there some
> magic I can put in the Local Variables block that will cause the images
> to be displayed on startup?
>
> # org-display-inline-images: t
# Local Variables:
# mode: Org
# eval: (org-display-inline-images)
# End:
Sebastian
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 13:46 ` Sebastian Rose
@ 2010-09-16 15:04 ` Robert Goldman
2010-09-29 6:20 ` Carsten Dominik
0 siblings, 1 reply; 9+ messages in thread
From: Robert Goldman @ 2010-09-16 15:04 UTC (permalink / raw)
To: Sebastian Rose; +Cc: Org Mode
On 9/16/10 Sep 16 -8:46 AM, Sebastian Rose wrote:
> Robert Goldman <rpgoldman@sift.info> writes:
>> ... Is there some
>> magic I can put in the Local Variables block that will cause the images
>> to be displayed on startup?
>>
>> # org-display-inline-images: t
>
>
>
> # Local Variables:
> # mode: Org
> # eval: (org-display-inline-images)
> # End:
>
>
> Sebastian
Would it be reasonable to augment org's processing of #+ directives so
that an org user can specify there instead of using the local variables,
which is less user-friendly?
best,
r
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: inline images in org-mode
2010-09-16 15:04 ` Robert Goldman
@ 2010-09-29 6:20 ` Carsten Dominik
0 siblings, 0 replies; 9+ messages in thread
From: Carsten Dominik @ 2010-09-29 6:20 UTC (permalink / raw)
To: rpgoldman; +Cc: Org Mode
On Sep 16, 2010, at 5:04 PM, Robert Goldman wrote:
> On 9/16/10 Sep 16 -8:46 AM, Sebastian Rose wrote:
>> Robert Goldman <rpgoldman@sift.info> writes:
>>> ... Is there some
>>> magic I can put in the Local Variables block that will cause the
>>> images
>>> to be displayed on startup?
>>>
>>> # org-display-inline-images: t
>>
>>
>>
>> # Local Variables:
>> # mode: Org
>> # eval: (org-display-inline-images)
>> # End:
>>
>>
>> Sebastian
>
> Would it be reasonable to augment org's processing of #+ directives so
> that an org user can specify there instead of using the local
> variables,
> which is less user-friendly?
Yes. I have just implemented startup keywords `inlineimages' and
`noinlineimages', as well as a new variable
`org-startup-with-inline-images' for a global setting.
Cheers
- Carsten
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2010-09-29 6:43 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-09-16 0:33 inline images in org-mode Robert Goldman
2010-09-16 12:11 ` Dan Davison
2010-09-16 12:37 ` Robert Goldman
2010-09-16 12:48 ` Dan Davison
2010-09-16 12:32 ` Sebastian Rose
2010-09-16 12:41 ` Robert Goldman
2010-09-16 13:46 ` Sebastian Rose
2010-09-16 15:04 ` Robert Goldman
2010-09-29 6:20 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).