org-babel

org-babel

[Federico Beffa]

[-- Attachment #1: Type: text/plain, Size: 92 bytes --]

Hi,

is there any plan to make org-babel a minor-mode (similarly to orgtbl)?

Regards,
Fede

[-- Attachment #2: Type: text/html, Size: 165 bytes --]

Re: org-babel

[Bastien]

Hi Federico,

Federico Beffa <beffa@ieee.org> writes:

> is there any plan to make org-babel a minor-mode (similarly to
> orgtbl)?

I'm not sure what it means but the answer is "no" :)

-- 
 Bastien

org-babel

[Richard Riley]

Two questions/requests on this nice module

1) Open src blocks to edit : I found docs which said C-c c-o or C-c '
should open src blocks. The first executes it according to the docs. So
how to open? Is there no standard binding I might need to enable?

2) I set up the emacs init as described in the org-babel web pages
http://orgmode.org/worg/org-contrib/babel/intro.php#sec-8.2.1 and I am
up and running but only after I manually created my emacs-init.el which
corresponds to the emacs-init.org file that org-babel processes as my
emacs init file. My understanding was that babel should create that file
from the code snippets in the org file on its own.  Or does it need to
be turned on? It doesnt create by default as the instructions seem to
suggest.


Small bug - Further to (2) the instructions here
http://orgmode.org/worg/org-contrib/babel/intro.php incorrectly contain
"org" as the path following a git clone (src/org/contrib/lisp etc) - it
should be org-mode on the path.



regards,

r.

-- 
Google Talk : rileyrgdev@googlemail.com  http://www.google.com/talk

ASCII ribbon campaign ( )
 - against HTML email  X
             & vCards / \

org-babel

[Jörg Hagmann]

org-babel doesn't work here. First question: do I have the current 
org-version? I updated today and have 6.30trans (On 2 computers, Mac 
Leopard and ubuntu).

If that's ok, next:
I have

(require 'org-babel-init)
(require 'org-babel-ruby)      ;; requires ruby, irb, ruby-mode, and 
inf-ruby
(org-babel-load-library-of-babel)

in .emacs

Starting emacs gives the Message:

An error has occurred while loading `/Users/bonasia/.emacs':
File error: Cannot open load file, org-babel-init

I either don't have the current version or misunderstood something.

Thanks, Jörg

Re: org-babel

[David Maus]

At Tue, 15 Sep 2009 10:58:01 +0200,
Jörg Hagmann wrote:
> 
> org-babel doesn't work here. First question: do I have the current 
> org-version? I updated today and have 6.30trans (On 2 computers, Mac 
> Leopard and ubuntu).
> 
> If that's ok, next:
> I have
> 
> (require 'org-babel-init)
> (require 'org-babel-ruby)      ;; requires ruby, irb, ruby-mode, and 
> inf-ruby
> (org-babel-load-library-of-babel)
> 
> in .emacs

org-babel resides in contrib/babel, so you have to copy the content of
contrib/babel/lisp to some place where emacs can find it.

Regards,
  -- David

-- 
OpenPGP... 0x316F4BE4670716FD
Jabber.... dmjena@jabber.org
Email..... maus.david@gmail.com
ICQ....... 241051416

Re: org-babel

[Carsten Dominik]

Hi Jörg,

you need to have the contrib/lisp directory of Org on your load path.

- Carsten

On Sep 15, 2009, at 9:58 AM, Jörg Hagmann wrote:

> org-babel doesn't work here. First question: do I have the current  
> org-version? I updated today and have 6.30trans (On 2 computers, Mac  
> Leopard and ubuntu).
>
> If that's ok, next:
> I have
>
> (require 'org-babel-init)
> (require 'org-babel-ruby)      ;; requires ruby, irb, ruby-mode, and  
> inf-ruby
> (org-babel-load-library-of-babel)
>
> in .emacs
>
> Starting emacs gives the Message:
>
> An error has occurred while loading `/Users/bonasia/.emacs':
> File error: Cannot open load file, org-babel-init
>
> I either don't have the current version or misunderstood something.
>
> Thanks, Jörg
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Re: org-babel

[Jörg Hagmann]

Thank you, David and Carsten.

Now it works with shell scripts.

With Ruby, I get:
Source block produced no output (Using the first example from the manual)

Ruby versions 1.8.6 on the Mac, 1.8.7 on ubuntu.

?

Thanks, Jörg

Carsten Dominik wrote:
> Hi Jörg,
>
> you need to have the contrib/lisp directory of Org on your load path.
>
> - Carsten
>
> On Sep 15, 2009, at 9:58 AM, Jörg Hagmann wrote:
>
>> org-babel doesn't work here. First question: do I have the current 
>> org-version? I updated today and have 6.30trans (On 2 computers, Mac 
>> Leopard and ubuntu).
>>
>> If that's ok, next:
>> I have
>>
>> (require 'org-babel-init)
>> (require 'org-babel-ruby)      ;; requires ruby, irb, ruby-mode, and 
>> inf-ruby
>> (org-babel-load-library-of-babel)
>>
>> in .emacs
>>
>> Starting emacs gives the Message:
>>
>> An error has occurred while loading `/Users/bonasia/.emacs':
>> File error: Cannot open load file, org-babel-init
>>
>> I either don't have the current version or misunderstood something.
>>
>> Thanks, Jörg
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>

-- 
Prof. Jörg Hagmann-Zanolari MD
University of Basel
Department of Biomedicine
Institute of Biochemistry and Genetics
Mattenstrasse 28
CH-4058 Basel
Switzerland
Phone +41 (0)61 267 3565

Re: org-babel

[Jörg Hagmann]

Sorry for the question below. I needed "require 'date'"; maybe a first 
example not needing to load anything would avoid this kind of noise.

In any case, thanks a lot for this tool!

Cheers, Jörg

Jörg Hagmann wrote:
> Thank you, David and Carsten.
>
> Now it works with shell scripts.
>
> With Ruby, I get:
> Source block produced no output (Using the first example from the manual)
>
> Ruby versions 1.8.6 on the Mac, 1.8.7 on ubuntu.
>
> ?
>
> Thanks, Jörg
>
> Carsten Dominik wrote:
>> Hi Jörg,
>>
>> you need to have the contrib/lisp directory of Org on your load path.
>>
>> - Carsten
>>
>> On Sep 15, 2009, at 9:58 AM, Jörg Hagmann wrote:
>>
>>> org-babel doesn't work here. First question: do I have the current 
>>> org-version? I updated today and have 6.30trans (On 2 computers, Mac 
>>> Leopard and ubuntu).
>>>
>>> If that's ok, next:
>>> I have
>>>
>>> (require 'org-babel-init)
>>> (require 'org-babel-ruby)      ;; requires ruby, irb, ruby-mode, and 
>>> inf-ruby
>>> (org-babel-load-library-of-babel)
>>>
>>> in .emacs
>>>
>>> Starting emacs gives the Message:
>>>
>>> An error has occurred while loading `/Users/bonasia/.emacs':
>>> File error: Cannot open load file, org-babel-init
>>>
>>> I either don't have the current version or misunderstood something.
>>>
>>> Thanks, Jörg
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Remember: use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>

-- 
Prof. Jörg Hagmann-Zanolari MD
University of Basel
Department of Biomedicine
Institute of Biochemistry and Genetics
Mattenstrasse 28
CH-4058 Basel
Switzerland
Phone +41 (0)61 267 3565

Re: org-babel

[Eric Schulte]

Hi Jörg,

Thanks for the catch, I've added "require 'date'" to the initial ruby
example. -- Eric

Jörg Hagmann <joerg.hagmann@unibas.ch> writes:

> Sorry for the question below. I needed "require 'date'"; maybe a first
> example not needing to load anything would avoid this kind of noise.
>
> In any case, thanks a lot for this tool!
>
> Cheers, Jörg
>
> Jörg Hagmann wrote:
>> Thank you, David and Carsten.
>>
>> Now it works with shell scripts.
>>
>> With Ruby, I get:
>> Source block produced no output (Using the first example from the manual)
>>
>> Ruby versions 1.8.6 on the Mac, 1.8.7 on ubuntu.
>>
>> ?
>>
>> Thanks, Jörg
>>
>> Carsten Dominik wrote:
>>> Hi Jörg,
>>>
>>> you need to have the contrib/lisp directory of Org on your load path.
>>>
>>> - Carsten
>>>
>>> On Sep 15, 2009, at 9:58 AM, Jörg Hagmann wrote:
>>>
>>>> org-babel doesn't work here. First question: do I have the current
>>>> org-version? I updated today and have 6.30trans (On 2 computers,
>>>> Mac Leopard and ubuntu).
>>>>
>>>> If that's ok, next:
>>>> I have
>>>>
>>>> (require 'org-babel-init)
>>>> (require 'org-babel-ruby)      ;; requires ruby, irb, ruby-mode,
>>>> and inf-ruby
>>>> (org-babel-load-library-of-babel)
>>>>
>>>> in .emacs
>>>>
>>>> Starting emacs gives the Message:
>>>>
>>>> An error has occurred while loading `/Users/bonasia/.emacs':
>>>> File error: Cannot open load file, org-babel-init
>>>>
>>>> I either don't have the current version or misunderstood something.
>>>>
>>>> Thanks, Jörg
>>>>
>>>>
>>>> _______________________________________________
>>>> Emacs-orgmode mailing list
>>>> Remember: use `Reply All' to send replies to the list.
>>>> Emacs-orgmode@gnu.org
>>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>>
>>

Re: org-babel

[Stephan Schmitt]

Hi Eric,

apropos require:  if the result of an emacs-lisp source block is a list, a 
function from org-table.el is needed (orgtbl-to-orgtbl, or so) which is not 
loaded by default.  In other words, somewhere a (require org-table) is missing.

Nice tool, btw,
	Stephan

Eric Schulte wrote:
> Hi Jörg,
> 
> Thanks for the catch, I've added "require 'date'" to the initial ruby
> example. -- Eric
> 
> Jörg Hagmann <joerg.hagmann@unibas.ch> writes:
> 
>> Sorry for the question below. I needed "require 'date'"; maybe a first
>> example not needing to load anything would avoid this kind of noise.
>>
>> In any case, thanks a lot for this tool!
>>
>> Cheers, Jörg
>>
>> Jörg Hagmann wrote:
>>> Thank you, David and Carsten.
>>>
>>> Now it works with shell scripts.
>>>
>>> With Ruby, I get:
>>> Source block produced no output (Using the first example from the manual)
>>>
>>> Ruby versions 1.8.6 on the Mac, 1.8.7 on ubuntu.
>>>
>>> ?
>>>
>>> Thanks, Jörg
>>>
> 
> 
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Re: org-babel

[Eric Schulte]

Hi Stephan,

You are correct, surprisingly org-table isn't explicitly required
anywhere in org-babel.  It must have already been loaded in every
previous usage.  I've just pushed a fix to this issue.

Thanks -- Eric

Stephan Schmitt <drmabuse@cs.tu-berlin.de> writes:

> Hi Eric,
>
> apropos require:  if the result of an emacs-lisp source block is a
> list, a function from org-table.el is needed (orgtbl-to-orgtbl, or so)
> which is not loaded by default.  In other words, somewhere a (require
> org-table) is missing.
>
> Nice tool, btw,
> 	Stephan
>
> Eric Schulte wrote:
>> Hi Jörg,
>>
>> Thanks for the catch, I've added "require 'date'" to the initial ruby
>> example. -- Eric
>>
>> Jörg Hagmann <joerg.hagmann@unibas.ch> writes:
>>
>>> Sorry for the question below. I needed "require 'date'"; maybe a first
>>> example not needing to load anything would avoid this kind of noise.
>>>
>>> In any case, thanks a lot for this tool!
>>>
>>> Cheers, Jörg
>>>
>>> Jörg Hagmann wrote:
>>>> Thank you, David and Carsten.
>>>>
>>>> Now it works with shell scripts.
>>>>
>>>> With Ruby, I get:
>>>> Source block produced no output (Using the first example from the manual)
>>>>
>>>> Ruby versions 1.8.6 on the Mac, 1.8.7 on ubuntu.
>>>>
>>>> ?
>>>>
>>>> Thanks, Jörg
>>>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode