DiTAA graph not in local directory

DiTAA graph not in local directory

[Sébastien Vauban]

Hi,

I try to generate the following DiTAA graph for LaTeX inclusion.

It's in my Org file `~/dir1/dir2/ecm.org':

--8<---------------cut here---------------start------------->8---
* Context

  This comes from norang.ca.

#+begin_ditaa communication.png -r -s 0.8
     +-----------+        +---------+
     |    PLC    |        |         |
     |  Network  +<------>+   PLC   +
     |    cRED   |        |  c707   |
     +-----------+        +----+----+
#+end_ditaa
--8<---------------cut here---------------end--------------->8---

When exporting to LaTeX, the image is well generated, but in my `~/'
directory. Not in `~/dir1/dir2/', hence not found by LaTeX.

Note that adding `./' to the ditaa command does not change anything...

--8<---------------cut here---------------start------------->8---
#+begin_ditaa ./communication.png -r -s 0.8
--8<---------------cut here---------------end--------------->8---

What can I do to have the resulting graphic local to the Org file?

Best regards,
  Seb

-- 
Sébastien Vauban



_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode-mXXj517/zsQ@public.gmane.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Re: DiTAA graph not in local directory

[Bernt Hansen]

Sébastien Vauban <wxhgmqzgwmuf-geNee64TY+gS+FvcfC7Uqw@public.gmane.org>
writes:

> I try to generate the following DiTAA graph for LaTeX inclusion.
>
> It's in my Org file `~/dir1/dir2/ecm.org':
>
> --8<---------------cut here---------------start------------->8---
> * Context
>
>   This comes from norang.ca.
>
> #+begin_ditaa communication.png -r -s 0.8
>      +-----------+        +---------+
>      |    PLC    |        |         |
>      |  Network  +<------>+   PLC   +
>      |    cRED   |        |  c707   |
>      +-----------+        +----+----+
> #+end_ditaa
> --8<---------------cut here---------------end--------------->8---
>
> When exporting to LaTeX, the image is well generated, but in my `~/'
> directory. Not in `~/dir1/dir2/', hence not found by LaTeX.
>
> Note that adding `./' to the ditaa command does not change anything...
>
> --8<---------------cut here---------------start------------->8---
> #+begin_ditaa ./communication.png -r -s 0.8
> --8<---------------cut here---------------end--------------->8---
>
> What can I do to have the resulting graphic local to the Org file?

Hi Seb,

That's not how my version of org-mode works.  My exported
communication.png is local to the org file.  I just created your example
in ~/nobackup/tmp/foo.org and exported to latex and it creates
communication.png in ~/nobackup/tmp/communication.png

Org-mode version 6.32trans (release_6.32b.122.g41496)
GNU Emacs 22.2.1 (i486-pc-linux-gnu, GTK+ Version 2.12.11) of 2008-11-09
on raven, modified by Debian

Now if I change the working directory with M-x cd and enter ~
then export it does what you see.  Maybe your default directory is not
the location of your org file?

-Bernt

Re: DiTAA graph not in local directory

[Carsten Dominik]

Hi Sebastian,

what is the publication context here?  Are you pressing `C-c C-e d'  
from the buffer, or is this a project published with org-publish?

- Carsten

On Nov 6, 2009, at 3:31 PM, Sébastien Vauban wrote:

> Hi,
>
> I try to generate the following DiTAA graph for LaTeX inclusion.
>
> It's in my Org file `~/dir1/dir2/ecm.org':
>
> --8<---------------cut here---------------start------------->8---
> * Context
>
>  This comes from norang.ca.
>
> #+begin_ditaa communication.png -r -s 0.8
>     +-----------+        +---------+
>     |    PLC    |        |         |
>     |  Network  +<------>+   PLC   +
>     |    cRED   |        |  c707   |
>     +-----------+        +----+----+
> #+end_ditaa
> --8<---------------cut here---------------end--------------->8---
>
> When exporting to LaTeX, the image is well generated, but in my `~/'
> directory. Not in `~/dir1/dir2/', hence not found by LaTeX.
>
> Note that adding `./' to the ditaa command does not change anything...
>
> --8<---------------cut here---------------start------------->8---
> #+begin_ditaa ./communication.png -r -s 0.8
> --8<---------------cut here---------------end--------------->8---
>
> What can I do to have the resulting graphic local to the Org file?
>
> Best regards,
>  Seb
>
> -- 
> Sébastien Vauban
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

- Carsten

Re: DiTAA graph not in local directory

[Sébastien Vauban]

Hi Bernt & Carsten,

Carsten wrote:
> Bernt Hansen wrote:
>> Sébastien Vauban writes:
>>
>>> I try to generate the following DiTAA graph for LaTeX inclusion.
>>>
>>> It's in my Org file `~/dir1/dir2/ecm.org':
>>>
>>> --8<---------------cut here---------------start------------->8---
>>> * Context
>>>
>>>   This comes from norang.ca.
>>>
>>> #+begin_ditaa communication.png -r -s 0.8
>>>      +-----------+        +---------+
>>>      |    PLC    |        |         |
>>>      |  Network  +<------>+   PLC   +
>>>      |    cRED   |        |  c707   |
>>>      +-----------+        +----+----+
>>> #+end_ditaa
>>> --8<---------------cut here---------------end--------------->8---
>>>
>>> When exporting to LaTeX, the image is well generated, but in my `~/'
>>> directory. Not in `~/dir1/dir2/', hence not found by LaTeX.
>>
>> That's not how my version of org-mode works. My exported communication.png
>> is local to the org file. I just created your example in
>> ~/nobackup/tmp/foo.org and exported to latex and it creates
>> communication.png in ~/nobackup/tmp/communication.png

You're more lucky than I am ;-)


>> Org-mode version 6.32trans (release_6.32b.122.g41496)
>> GNU Emacs 22.2.1 (i486-pc-linux-gnu, GTK+ Version 2.12.11) of 2008-11-09
>> on raven, modified by Debian

`M-x version' gives: "Org-mode version 6.32trans". I think I got it on last
Thu or Fri morning.


>> Now if I change the working directory with M-x cd and enter ~
>> then export it does what you see.  Maybe your default directory is not
>> the location of your org file?

I have, since long, the following chunk in my `.emacs', for setting the
`default-directory':

--8<---------------cut here---------------start------------->8---
;; change the default directory (if it exists)
;; (it is also the default directory when attaching files to mails)
(let ((my-default-directory "~/"))
  (setq default-directory
        (if (file-directory-p my-default-directory)
            my-default-directory
          (getenv "HOME"))))
--8<---------------cut here---------------end--------------->8---

When looking for the current value of that variable, I have:

--8<---------------cut here---------------start------------->8---
default-directory is a variable defined in `C source code'.
Its value is "~/"
Local in buffer *followup to Bernt Hansen on gmane.emacs.orgmode*; global value is nil

  Automatically becomes buffer-local when set in any fashion.
  This variable is safe as a file local variable if its value
  satisfies the predicate `stringp'.

Documentation:
Name of default directory of current buffer.  Should end with slash.
To interactively change the default directory, use command `cd'.
--8<---------------cut here---------------end--------------->8---

Note that I am a bit puzzled, now, by the fact that variable has a
buffer-local value, and that its global value is nil. Maybe I should do
`setq-default' instead of `setq'?

Anyway, I don't remember exactly why I did set that, but I think it's for easy
opening of files (right prefix when `C-x C-f').

Regarding my Org files, I have 2 main usages:

- organizational files, with items to do, scheduling dates and deadlines;
- text files (without any active dates) that I purely want to write easily and
  export nicely (in LaTeX).

The "organizational files" are located either in `~/Personal' or in
`~/Projects':

--8<---------------cut here---------------start------------->8---
    ;; directory with org files (used by the hooks for `remember.el')
    (setq org-directory
          (if (file-directory-p "~/Personal/")
              "~/Personal/"
            "~/"))


    ;; set which files to search for TODO entries and scheduled items
    ;; (avoiding hidden files)
    (setq org-agenda-files
          (append (directory-files org-directory t "^[^\\.].*\\.org$")
                  (if (file-exists-p "~/Projects/")
                      (directory-files "~/Projects/" t "^[^\\.].*\\.org$")
                    nil)))
--8<---------------cut here---------------end--------------->8---

The "text files" are anywhere on my disk, generally in subdirectories of
`~/Projects'.

The real directory of the file that's causing me "troubles" (in my above
description) is, for example,
`~/Projects/Insurance/Acme/docs/operations-manual'.


> what is the publication context here?  Are you pressing `C-c C-e d' from the
> buffer, or is this a project published with org-publish?

I'm exporting with `C-c C-e l' to produce a LaTeX document in another buffer.
Then, I move to it, and do `C-c C-c' to compile it to PDF, and view it.

Carsten, you pinpoint another trouble that I've had months ago (when first
using Org) and never changed, being accustomed to it, over time...

If I do `C-c C-e d', I never get the PDF successfully compiled, as TeX says it
does not find my pictures (though, local to the document).

My document is here:

~/Projects/Insurance/Acme/docs/operations-manual/Upload_documentation.org

My static picture (for direct inclusion, not generated by Ditaa) is there as
well:

~/Projects/Insurance/Acme/docs/operations-manual/cygwin-icon.png

And the created files (when `C-c C-e d') are there:

- ~/Projects/Insurance/Acme/docs/operations-manual/Upload_documentation.tex
- ~/Upload_documentation.aux
- ~/Upload_documentation.idx
- ~/Upload_documentation.log
- ~/Upload_documentation.out
- ~/Upload_documentation.pdf
- ~/Upload_documentation.toc
- ~/procedure.png

So, the TeX file is correctly located, but the auxiliary ones not.

And TeX fails to produce the PDF with the following error:

--8<---------------cut here---------------start------------->8---
LaTeX Warning: File `cygwin-icon.png' not found on input line 153.


! Package pdftex.def Error: File `cygwin-icon.png' not found.
--8<---------------cut here---------------end--------------->8---

Maybe it's completely related to the above problem?

Best regards and many thanks for your help,
  Seb

-- 
Sébastien Vauban



_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode-mXXj517/zsQ@public.gmane.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Re: DiTAA graph not in local directory

[Bernt Hansen]

Sébastien Vauban <wxhgmqzgwmuf-geNee64TY+gS+FvcfC7Uqw@public.gmane.org>
writes:

> Hi Bernt & Carsten,
>
> Carsten wrote:
>> Bernt Hansen wrote:
>>> Sébastien Vauban writes:
>>>
>>>> I try to generate the following DiTAA graph for LaTeX inclusion.
>>>>
>>>> It's in my Org file `~/dir1/dir2/ecm.org':
>>>>
>>>> --8<---------------cut here---------------start------------->8---
>>>> * Context
>>>>
>>>>   This comes from norang.ca.
>>>>
>>>> #+begin_ditaa communication.png -r -s 0.8
>>>>      +-----------+        +---------+
>>>>      |    PLC    |        |         |
>>>>      |  Network  +<------>+   PLC   +
>>>>      |    cRED   |        |  c707   |
>>>>      +-----------+        +----+----+
>>>> #+end_ditaa
>>>> --8<---------------cut here---------------end--------------->8---
>>>>
>>>> When exporting to LaTeX, the image is well generated, but in my `~/'
>>>> directory. Not in `~/dir1/dir2/', hence not found by LaTeX.
>>>
>>> That's not how my version of org-mode works. My exported communication.png
>>> is local to the org file. I just created your example in
>>> ~/nobackup/tmp/foo.org and exported to latex and it creates
>>> communication.png in ~/nobackup/tmp/communication.png
>
> You're more lucky than I am ;-)
>
>
>>> Org-mode version 6.32trans (release_6.32b.122.g41496)
>>> GNU Emacs 22.2.1 (i486-pc-linux-gnu, GTK+ Version 2.12.11) of 2008-11-09
>>> on raven, modified by Debian
>
> `M-x version' gives: "Org-mode version 6.32trans". I think I got it on last
> Thu or Fri morning.
>
>
>>> Now if I change the working directory with M-x cd and enter ~
>>> then export it does what you see.  Maybe your default directory is not
>>> the location of your org file?
>
> I have, since long, the following chunk in my `.emacs', for setting the
> `default-directory':
>
> --8<---------------cut here---------------start------------->8---
> ;; change the default directory (if it exists)
> ;; (it is also the default directory when attaching files to mails)
> (let ((my-default-directory "~/"))
>   (setq default-directory
>         (if (file-directory-p my-default-directory)
>             my-default-directory
>           (getenv "HOME"))))
> --8<---------------cut here---------------end--------------->8---

I think this function is the cause of your problems.  I think you are
changing the default directory for whatever buffer is active when you
execute that.  If that buffer happens to be the org file you want to
export you are changing where the resulting export files go.

> When looking for the current value of that variable, I have:
>
> --8<---------------cut here---------------start------------->8---
> default-directory is a variable defined in `C source code'.
> Its value is "~/"
> Local in buffer *followup to Bernt Hansen on gmane.emacs.orgmode*; global value is nil
>
>   Automatically becomes buffer-local when set in any fashion.
>   This variable is safe as a file local variable if its value
>   satisfies the predicate `stringp'.
>
> Documentation:
> Name of default directory of current buffer.  Should end with slash.
> To interactively change the default directory, use command `cd'.
> --8<---------------cut here---------------end--------------->8---
>
> Note that I am a bit puzzled, now, by the fact that variable has a
> buffer-local value, and that its global value is nil. Maybe I should do
> `setq-default' instead of `setq'?
>
> Anyway, I don't remember exactly why I did set that, but I think it's for easy
> opening of files (right prefix when `C-x C-f').

I just use C-x C-f ~/

and whatever current directory was active is dropped.  I don't think you
need your setq default-directory at all - you just need to teach your
fingers to add ~/ after C-x C-f

-Bernt

Re: DiTAA graph not in local directory

[Sébastien Vauban]

Hi Bernt,

Bernt Hansen wrote:
> Sébastien Vauban writes:
>> Carsten wrote:
>>> Bernt Hansen wrote:
>>>> Sébastien Vauban writes:
>>>>
>>>>> I try to generate the following DiTAA graph for LaTeX inclusion.
>>>>>
>>>>> It's in my Org file `~/dir1/dir2/ecm.org'.
>>>>>
>>>>> When exporting to LaTeX, the image is well generated, but in my `~/'
>>>>> directory. Not in `~/dir1/dir2/', hence not found by LaTeX.
>>>>
>>>> Now if I change the working directory with M-x cd and enter ~
>>>> then export it does what you see.  Maybe your default directory is not
>>>> the location of your org file?
>>
>> I have, since long, the following chunk in my `.emacs', for setting the
>> `default-directory':
>>
>> --8<---------------cut here---------------start------------->8---
>> ;; change the default directory (if it exists)
>> ;; (it is also the default directory when attaching files to mails)
>> (let ((my-default-directory "~/"))
>>   (setq default-directory
>>         (if (file-directory-p my-default-directory)
>>             my-default-directory
>>           (getenv "HOME"))))
>> --8<---------------cut here---------------end--------------->8---
>
> I think this function is the cause of your problems.  I think you are
> changing the default directory for whatever buffer is active when you
> execute that.  If that buffer happens to be the org file you want to
> export you are changing where the resulting export files go.

I commented the above in my `.emacs' file and restarted Emacs.


>> Anyway, I don't remember exactly why I did set that, but I think it's for easy
>> opening of files (right prefix when `C-x C-f').
>
> I just use C-x C-f ~/
>
> and whatever current directory was active is dropped.  I don't think you
> need your setq default-directory at all - you just need to teach your
> fingers to add ~/ after C-x C-f

Yes, I'll do that now... In fact, I implemented this, years ago, for "easily"
attaching documents to emails.


>> When looking for the current value of that variable

I now have:

--8<---------------cut here---------------start------------->8---
default-directory is a variable defined in `C source code'.
Its value is 
"/home/sva/Projects/Insurance/Acme/docs/operations-manual/"
Local in buffer Upload_documentation.tex; global value is nil

  Automatically becomes buffer-local when set in any fashion.
  This variable is safe as a file local variable if its value
  satisfies the predicate `stringp'.

Documentation:
Name of default directory of current buffer.  Should end with slash.
To interactively change the default directory, use command `cd'.
--8<---------------cut here---------------end--------------->8---

from both the Org file and the TeX file. Correct, thus.

Though, I have exactly the same problem as yesterday: only the TeX file is
produced locally when `C-c C-e d', and all the other files (.aux, .log and the
.png from Ditaa) are stored in `~/'.

Ununderstandable...

Best regards,
  Seb

-- 
Sébastien Vauban



_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode-mXXj517/zsQ@public.gmane.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

Re: DiTAA graph not in local directory

[Bernt Hansen]

Sébastien Vauban <wxhgmqzgwmuf-geNee64TY+gS+FvcfC7Uqw@public.gmane.org>
writes:

> Hi Bernt,
>
> Bernt Hansen wrote:
>> Sébastien Vauban writes:
>>> I have, since long, the following chunk in my `.emacs', for setting the
>>> `default-directory':
>>>
>>> --8<---------------cut here---------------start------------->8---
>>> ;; change the default directory (if it exists)
>>> ;; (it is also the default directory when attaching files to mails)
>>> (let ((my-default-directory "~/"))
>>>   (setq default-directory
>>>         (if (file-directory-p my-default-directory)
>>>             my-default-directory
>>>           (getenv "HOME"))))
>>> --8<---------------cut here---------------end--------------->8---
>>
>> I think this function is the cause of your problems.  I think you are
>> changing the default directory for whatever buffer is active when you
>> execute that.  If that buffer happens to be the org file you want to
>> export you are changing where the resulting export files go.
>
> I commented the above in my `.emacs' file and restarted Emacs.
>
>
>>> Anyway, I don't remember exactly why I did set that, but I think it's for easy
>>> opening of files (right prefix when `C-x C-f').
>>
>> I just use C-x C-f ~/
>>
>> and whatever current directory was active is dropped.  I don't think you
>> need your setq default-directory at all - you just need to teach your
>> fingers to add ~/ after C-x C-f
>
> Yes, I'll do that now... In fact, I implemented this, years ago, for "easily"
> attaching documents to emails.
>
>
>>> When looking for the current value of that variable
>
> I now have:
>
> --8<---------------cut here---------------start------------->8---
> default-directory is a variable defined in `C source code'.
> Its value is 
> "/home/sva/Projects/Insurance/Acme/docs/operations-manual/"
> Local in buffer Upload_documentation.tex; global value is nil
>
>   Automatically becomes buffer-local when set in any fashion.
>   This variable is safe as a file local variable if its value
>   satisfies the predicate `stringp'.
>
> Documentation:
> Name of default directory of current buffer.  Should end with slash.
> To interactively change the default directory, use command `cd'.
> --8<---------------cut here---------------end--------------->8---
>
> from both the Org file and the TeX file. Correct, thus.
>
> Though, I have exactly the same problem as yesterday: only the TeX file is
> produced locally when `C-c C-e d', and all the other files (.aux, .log and the
> .png from Ditaa) are stored in `~/'.
>
> Ununderstandable...

That's weird.  I created a test.org file in /tmp/foo/bar/baz/test.org
and made a small ditaa diagram (foo.png) with two rectangles in it.

C-c C-e d creates

,----
| bernt@gollum:/tmp/foo/bar/baz$ ls
| foo.png  test.org  test.pdf  test.tex
| bernt@gollum:/tmp/foo/bar/baz$ 
`----

and nothing else.  I don't get .aux, .log etc in there.

For me all files are in the same directory as the .org
file.

,----
| default-directory is a variable defined in `C source code'.
| Its value is "/tmp/foo/bar/baz/"
| Local in buffer test.org; global value is nil
`----

I'm afraid I'm out of ideas on this one.

-Bernt

Re: Re: DiTAA graph not in local directory

[Bernt Hansen]

Sebastian Rose <sebastian_rose@gmx.de> writes:

> `org-reload'  changes the buffers `default-directory' to the directory
> Org's *.el files are located. I've sent a bug report to that concern.
>
> If I do `M-x org-reload' and then `C-c C-e p', the LaTeX/PDF export
> failes and all the LaTeX fallout ends up in
> ~/emacs/lisp/ext/org-mode/.
>
> Restarting emacs helps.
>
>
> Might that be related somhow?

Yes that looks like a bug.  I do org-reload too but normally I open the
file I'm working on _after_ that so I never noticed.

org-reload probably needs to be fixed.

-Bernt