emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Org-beamer problems
@ 2011-01-19  7:03 Bill Moran
  2011-01-19 15:55 ` Jeff Horn
                   ` (2 more replies)
  0 siblings, 3 replies; 14+ messages in thread
From: Bill Moran @ 2011-01-19  7:03 UTC (permalink / raw)
  To: emacs-orgmode

I've been trying to follow the various tutorials on the web 
to do beamer in org-mode. I've used beamer, latex and emacs 
for many years but am finding that none of the examples on 
the web work totally s intended in my attempts to use
org-mode with beamer. 

I have copied verbatim several examples such as from here:

http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html#sec-4_1

When I run  them I get the following problems - plus others 
I will go into later if necessary:

1. The title page does not have a title - just the date. 
When I check the latex file created from the org file I 
notice that a \maketitle command occurs outside a frame environment 
- whereas in beamer I normally use \titlepage inside a frame
environment to create the titlepage. 

2. \alert command does not work - even with the additions to .emacs 
suggested here:
 http://www.mail-archive.com/emacs-orgmode@gnu.org/msg21507.html
(And there are no errors in running the .emacs file) 
Always the @ symbol appears in the latex created from org as @. 

I wonder whether there is some configuration I am missing. 
Other aspects of the slides are normal - bullets and 
frametitles specifically. 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19  7:03 Bill Moran
@ 2011-01-19 15:55 ` Jeff Horn
  2011-01-19 22:22   ` Henri-Paul Indiogine
       [not found] ` <AANLkTi=7TkcFBVGc90SkTBHFjKx5j7PgHbia=ZkNRxYS@mail.gmail.com>
  2011-01-19 16:36 ` Eric S Fraga
  2 siblings, 1 reply; 14+ messages in thread
From: Jeff Horn @ 2011-01-19 15:55 UTC (permalink / raw)
  To: Bill Moran; +Cc: emacs-orgmode

What version of org-mode are your running? What version of emacs? If
you haven't done so already, try upgrading to the latest version of
org and seeing if that solves the problem.

=M-x org-version RET=
=M-x emacs-version RET=

See the latest development version of org:

    http://orgmode.org/index.html#sec-3_2

On Wed, Jan 19, 2011 at 2:03 AM, Bill Moran <bill1moran@gmail.com> wrote:
> I've been trying to follow the various tutorials on the web
> to do beamer in org-mode. I've used beamer, latex and emacs
> for many years but am finding that none of the examples on
> the web work totally s intended in my attempts to use
> org-mode with beamer.
>
> I have copied verbatim several examples such as from here:
>
> http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html#sec-4_1
>
> When I run  them I get the following problems - plus others
> I will go into later if necessary:
>
> 1. The title page does not have a title - just the date.
> When I check the latex file created from the org file I
> notice that a \maketitle command occurs outside a frame environment
> - whereas in beamer I normally use \titlepage inside a frame
> environment to create the titlepage.
>
> 2. \alert command does not work - even with the additions to .emacs
> suggested here:
>  http://www.mail-archive.com/emacs-orgmode@gnu.org/msg21507.html
> (And there are no errors in running the .emacs file)
> Always the @ symbol appears in the latex created from org as @.
>
> I wonder whether there is some configuration I am missing.
> Other aspects of the slides are normal - bullets and
> frametitles specifically.
>
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>



-- 
Jeffrey Horn
http://www.failuretorefrain.com/jeff/

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
       [not found] ` <AANLkTi=7TkcFBVGc90SkTBHFjKx5j7PgHbia=ZkNRxYS@mail.gmail.com>
@ 2011-01-19 15:58   ` John Hendy
  0 siblings, 0 replies; 14+ messages in thread
From: John Hendy @ 2011-01-19 15:58 UTC (permalink / raw)
  To: Bill Moran, emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 1838 bytes --]

Whoops -- skipped the list...

On Wed, Jan 19, 2011 at 9:56 AM, John Hendy <jw.hendy@gmail.com> wrote:

>
>
> On Wed, Jan 19, 2011 at 1:03 AM, Bill Moran <bill1moran@gmail.com> wrote:
>
>>
>>  1. The title page does not have a title - just the date.
>> When I check the latex file created from the org file I
>> notice that a \maketitle command occurs outside a frame environment
>> - whereas in beamer I normally use \titlepage inside a frame
>> environment to create the titlepage.
>>
>>
> That's interesting. You have a line like this?
>
> #+TITLE: title_of_doc
>
> Even if you don't, my compilations have always yielded a default title of
> the file name, I believe.
>
>
>> 2. \alert command does not work - even with the additions to .emacs
>> suggested here:
>>  http://www.mail-archive.com/emacs-orgmode@gnu.org/msg21507.html
>> (And there are no errors in running the .emacs file)
>> Always the @ symbol appears in the latex created from org as @.
>>
>
> This type of alert markup, indeed, does not work. This has been asked
> before (by me!). See this string:
> http://www.mail-archive.com/emacs-orgmode@gnu.org/msg28842.html.
>
>
>>
>> I wonder whether there is some configuration I am missing.
>> Other aspects of the slides are normal - bullets and
>> frametitles specifically.
>>
>
> Would you attach your actual org file? This often helps better than
> describing. For example, you mention extracting verbatim examples, but
> without seeing the file or pasting it, I'm not sure what your header
> arguments look like, and this can affect things quite a bit.
>
>
> Best regards,
> John
>
>
>>
>>
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Please use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
>

[-- Attachment #1.2: Type: text/html, Size: 3307 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19  7:03 Bill Moran
  2011-01-19 15:55 ` Jeff Horn
       [not found] ` <AANLkTi=7TkcFBVGc90SkTBHFjKx5j7PgHbia=ZkNRxYS@mail.gmail.com>
@ 2011-01-19 16:36 ` Eric S Fraga
  2011-01-19 21:34   ` Bill Moran
  2 siblings, 1 reply; 14+ messages in thread
From: Eric S Fraga @ 2011-01-19 16:36 UTC (permalink / raw)
  To: Bill Moran; +Cc: emacs-orgmode

Bill Moran <bill1moran@gmail.com> writes:

> I've been trying to follow the various tutorials on the web 
> to do beamer in org-mode. I've used beamer, latex and emacs 
> for many years but am finding that none of the examples on 
> the web work totally s intended in my attempts to use
> org-mode with beamer. 
>
> I have copied verbatim several examples such as from here:
>
> http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html#sec-4_1
>
> When I run  them I get the following problems - plus others 
> I will go into later if necessary:
>
> 1. The title page does not have a title - just the date. 
> When I check the latex file created from the org file I 
> notice that a \maketitle command occurs outside a frame environment 
> - whereas in beamer I normally use \titlepage inside a frame
> environment to create the titlepage. 

My immediate response would be to ask why you aren't using \maketitle
given that the command is beamer-aware?  That is, \maketitle will create
a title page whose format is defined by the beamer theme you have
selected.  Otherwise, you could always customise
=org-export-latex-title-command= to nothing and use direct latex code to
do what you want:

--8<---------------cut here---------------start------------->8---
#+begin_latex
\begin{frame} \titlepage \end{frame}
#+end_latex
--8<---------------cut here---------------end--------------->8---

I've not tried this.

> 2. \alert command does not work - even with the additions to .emacs 
> suggested here:
>  http://www.mail-archive.com/emacs-orgmode@gnu.org/msg21507.html
> (And there are no errors in running the .emacs file) 
> Always the @ symbol appears in the latex created from org as @. 

Can you tell us exactly what you have done to customise the relevant
variables and where you have done these customisations?  Difficult to
help without this information unfortunately.  While we're at it, org and
emacs version information is also helpful.

-- 
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.4 (release_7.4.221.g4007c)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19 16:36 ` Eric S Fraga
@ 2011-01-19 21:34   ` Bill Moran
  2011-01-19 22:02     ` Chris Malone
  0 siblings, 1 reply; 14+ messages in thread
From: Bill Moran @ 2011-01-19 21:34 UTC (permalink / raw)
  To: emacs-orgmode

HI Eric, John, Jeff and Birch 


Eric S Fraga <e.fraga <at> ucl.ac.uk> writes:

> 
> My immediate response would be to ask why you aren't using \maketitle
> given that the command is beamer-aware?  That is, \maketitle will create
> a title page whose format is defined by the beamer theme you have
> selected.  Otherwise, you could always customise
> =org-export-latex-title-command= to nothing and use direct latex code to
> do what you want:
> 
> --8<---------------cut here---------------start------------->8---
> #+begin_latex
> \begin{frame} \titlepage \end{frame}
> #+end_latex
> --8<---------------cut here---------------end--------------->8---
> 
> I've not tried this.
> 
> > 2. \alert command does not work - even with the additions to .emacs 
> > suggested here:
> >  http://www.mail-archive.com/emacs-orgmode <at> gnu.org/msg21507.html
> > (And there are no errors in running the .emacs file) 
> > Always the @ symbol appears in the latex created from org as @. 
> 
> Can you tell us exactly what you have done to customise the relevant
> variables and where you have done these customisations?  Difficult to
> help without this information unfortunately.  While we're at it, org and
> emacs version information is also helpful.
> 

>



Thanks for all of your responses and for taking the time to help me. I'll try to
answer your questions. As far as possible I  use the "stock" ubuntu (maverick -
10.10) repositories for emacs and its associated software. So I'm using emacs
23.1.1 and org-mode 6.36c. The version of beamer I'm using, as described in the
repositories, is latex-beamer 3.07-2ubuntu1. I am aware  that there are more
recent versions available  - particularly of org-mode - but was trying to keep
things simple. 

Let me also say that my aim was to arrive at an understanding of  how to use
org-mode for slide creation - since I do a lot of that - rather than to compose
a specific set of slides. I realise that I could use direct latex code to solve
the problems but that wasn't the point of the exercise. 

I've read more since I sent the email and now realise that the issues I brought
up have been discussed earlier and where I can I've tried to use the proposed
solutions. In particular I have this in my .emacs:

 
(setq org-emphasis-alist (quote (("*" bold "<b>" "</b>") 
      				 ("/" italic "<i>" "</i>")
      				 ("_" underline "<span style=\"text-decoration:underline;\">" "</span>")
      				 ("=" org-code "<code>" "</code>" verbatim)
      				 ("~" org-verbatim "<code>" "</code>" verbatim)
      				 ("+" (:strike-through t) "<del>" "</del>")
      				 ("@" org-warning "<b>" "</b>")))
      org-export-latex-emphasis-alist (quote 
      				       (("*" "\\textbf{%s}" nil)
      					("/" "\\emph{%s}" nil) 
      					("_" "\\underline{%s}" nil)
      					("+" "\\texttt{%s}" nil)
      					("=" "\\verb=%s=" nil)
      					("~" "\\verb~%s~" t)
      					("@" "\\alert{%s}" nil)))
      )

from a solution to the @ problem proposed by Eric somewhere. And I understand
that I can use \maketitle normally to produce a title page in beamer - just
tried on a hand-crafted (in emacs)  latex-beamer file using my set up.  

To keep this email as brief as possible, let's take this snippet (verbatim) of
an  example from Eric:

----------------------------------start-----------------------------------
#+TITLE:     Writing Beamer presentations in org-mode
#+AUTHOR:    Eric S Fraga
#+EMAIL:     e.fraga@ucl.ac.uk
#+DATE:      2010-03-30 Tue
#+DESCRIPTION: 
#+KEYWORDS: 
#+LANGUAGE:  en
#+OPTIONS:   H:3 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
#+OPTIONS:   TeX:t LaTeX:t skip:nil d:nil todo:t pri:nil tags:not-in-toc
#+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0
path:http://orgmode.org/org-info.js
#+EXPORT_SELECT_TAGS: export
#+EXPORT_EXCLUDE_TAGS: noexport
#+LINK_UP:   
#+LINK_HOME: 

#+startup: oddeven

#+startup: beamer
#+LaTeX_CLASS: beamer
#+LaTeX_CLASS_OPTIONS: [bigger]
#+latex_header: \mode<beamer>{\usetheme{Madrid}}
#+BEAMER_FRAME_LEVEL: 2

#+COLUMNS: %20ITEM %13BEAMER_env(Env) %6BEAMER_envargs(Args) %4BEAMER_col(Col)
%7BEAMER_extra(Extra)

* Methodology

** A simple slide
This slide consists of some text with a number of bullet points:
- the first, very @important@, point!
- the previous point shows the use of the special markup which
  translates to the Beamer specific /alert/ command for highlighting
  text.
The above list could be numbered or any other type of list and may
include sub-lists.
---------------------------end----------------------------------------

When I do "C-c C-e p" to create the pdf file I get 3 slides. The first is a
title page but has no title - only the date. The second is an outline (toc)
slide as expected and the third is again as expected except that @important@ is
not rendered as \alert{important}. 


The latex created  by "C-c C-e l" is

---------------------------start----------------------------------------
% Created 2011-01-20 Thu 08:18
\documentclass[bigger]{beamer}

      \mode<{{{beamermode}}}>

      \usetheme{{{{beamertheme}}}}

      \usecolortheme{{{{beamercolortheme}}}}

      \beamertemplateballitem

      \setbeameroption{show notes}
      \usepackage[utf8]{inputenc}

      \usepackage[T1]{fontenc}

      \usepackage{hyperref}

      \usepackage{color}
      \usepackage{listings}
      \lstset{numbers=none,language=[ISO]C++,tabsize=4,
  frame=single,
  basicstyle=\small,
  showspaces=false,showstringspaces=false,
  showtabs=false,
  keywordstyle=\color{blue}\bfseries,
  commentstyle=\color{red},
  }

      \usepackage{verbatim}

      \institute{{{{beamerinstitute}}}}
          
       \subject{{{{beamersubject}}}}

\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{fixltx2e}
\usepackage{graphicx}
\usepackage{longtable}
\usepackage{float}
\usepackage{wrapfig}
\usepackage{soul}
\usepackage{t1enc}
\usepackage{textcomp}
\usepackage{marvosym}
\usepackage{wasysym}
\usepackage{latexsym}
\usepackage{amssymb}
\usepackage{hyperref}
\tolerance=1000
\mode<beamer>{\usetheme{Madrid}}
\providecommand{\alert}[1]{\textbf{#1}}

\title{Writing Beamer presentations in org-mode}
\author{Eric S Fraga}
\date{2010-03-30 Tue}

\begin{document}

\maketitle

\begin{frame}
\frametitle{Outline}
\setcounter{tocdepth}{3}
\tableofcontents
\end{frame}




\section{Methodology}
\label{sec-1}
\begin{frame}[fragile]\frametitle{A simple slide}
\label{sec-1_1}

This slide consists of some text with a number of bullet points:
\begin{itemize}
\item the first, very @important@, point!
\item the previous point shows the use of the special markup which
  translates to the Beamer specific \emph{alert} command for highlighting
  text.
\end{itemize}

The above list could be numbered or any other type of list and may
include sub-lists.
\end{frame}

\end{document}
----------------------------------end-----------------------------------

and running pdflatex on this produces an identical result to "C-c C-e p" on the
org file - as it should. 



I'm not sure I've answered all of your questions but perhaps this is enough to
suggest a solution or refine the questions.

Many thanks for your time!

Bill

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19 15:55 ` Jeff Horn
@ 2011-01-19 22:22   ` Henri-Paul Indiogine
  2011-01-19 22:33     ` Chris Malone
  2011-01-20  8:57     ` Eric S Fraga
  0 siblings, 2 replies; 14+ messages in thread
From: Henri-Paul Indiogine @ 2011-01-19 22:22 UTC (permalink / raw)
  To: emacs-org

Greetings!

I am also having difficulties running Beamer from org-mode.   I am
running a fully updated Ubuntu with snapshot emacs and a daily updated
git version of org-mode.

I am not able to get blocks, lists, and colums to work.  I have a
feeling from Googling quite a bit that the problem is due to some
interaction between my org-mode header and .emacs.

Unfortunately, the org-mode manual does not state how to configure
.emacs for Beamer export.  There must be something going on with the
levels of headers and the B_Block directive.  

Basically, I can not get the example to work.

Here is the relevant part of my .emacs

-------------------------------------------------
(setq org-export-latex-classes 
      '(("article" "\\documentclass[11pt]{article}"
         ("\\section{%s}" . "\\section*{%s}")
	 ("\\subsection{%s}" . "\\subsection*{%s}")
	 ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
	 ("\\paragraph{%s}" . "\\paragraph*{%s}")
	 ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))

	("beamer" "\\documentclass[bigger]{beamer}
                   \\usepackage{verbatim}
                   \\definecolor{verylightgray}{rgb}{0.93,0.93,1.0}
                   \\mode<beamer>{\\usetheme{Madrid}}
                   \\mode<handout>{\\usecolortheme[rgb={0.5,0.5,0.5}]{structure}
                   \\usepackage{pgfpages}}
                   \\usepackage[absolute,overlay]{textpos}
                   \\setlength{\\TPHorizModule}{1mm}
                   \\setlength{\\TPVertModule}{1mm}"
         ("\\section{%s}" . "\\section*{%s}")
         ("\\begin{frame}[fragile]\\frametitle{%s}" "\\end{frame}"
          "\\begin{frame}[fragile]\\frametitle{%s}" "\\end{frame}"))
--------------------------------------------------------

The header is the same as from the example.

Thanks,
Henri-Paul




Henri-Paul Indiogine
Email: hindiogine@gmail.com
Running: Ubuntu Linux 10.10, Emacs 24.0.50.1, org-mode 7.3

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19 22:22   ` Henri-Paul Indiogine
@ 2011-01-19 22:33     ` Chris Malone
  2011-01-20  8:57     ` Eric S Fraga
  1 sibling, 0 replies; 14+ messages in thread
From: Chris Malone @ 2011-01-19 22:33 UTC (permalink / raw)
  To: hindiogine; +Cc: emacs-org


[-- Attachment #1.1: Type: text/plain, Size: 2620 bytes --]

Hi Henri-Paul,

I'm running =org-version= 7.3 (release_7.3.89.g97f4c.dirty)

I don't have anything in my .emacs about the beamer latex class - it just
works.  The only =org-export-latex-classes= statements that I have are with
some latex classes that I have made myself.

What does your .tex output look like?

Chris

On Wed, Jan 19, 2011 at 5:22 PM, Henri-Paul Indiogine
<hindiogine@gmail.com>wrote:

> Greetings!
>
> I am also having difficulties running Beamer from org-mode.   I am
> running a fully updated Ubuntu with snapshot emacs and a daily updated
> git version of org-mode.
>
> I am not able to get blocks, lists, and colums to work.  I have a
> feeling from Googling quite a bit that the problem is due to some
> interaction between my org-mode header and .emacs.
>
> Unfortunately, the org-mode manual does not state how to configure
> .emacs for Beamer export.  There must be something going on with the
> levels of headers and the B_Block directive.
>
> Basically, I can not get the example to work.
>
> Here is the relevant part of my .emacs
>
> -------------------------------------------------
> (setq org-export-latex-classes
>      '(("article" "\\documentclass[11pt]{article}"
>         ("\\section{%s}" . "\\section*{%s}")
>         ("\\subsection{%s}" . "\\subsection*{%s}")
>         ("\\subsubsection{%s}" . "\\subsubsection*{%s}")
>         ("\\paragraph{%s}" . "\\paragraph*{%s}")
>         ("\\subparagraph{%s}" . "\\subparagraph*{%s}"))
>
>        ("beamer" "\\documentclass[bigger]{beamer}
>                   \\usepackage{verbatim}
>                   \\definecolor{verylightgray}{rgb}{0.93,0.93,1.0}
>                   \\mode<beamer>{\\usetheme{Madrid}}
>
> \\mode<handout>{\\usecolortheme[rgb={0.5,0.5,0.5}]{structure}
>                   \\usepackage{pgfpages}}
>                   \\usepackage[absolute,overlay]{textpos}
>                   \\setlength{\\TPHorizModule}{1mm}
>                   \\setlength{\\TPVertModule}{1mm}"
>         ("\\section{%s}" . "\\section*{%s}")
>         ("\\begin{frame}[fragile]\\frametitle{%s}" "\\end{frame}"
>          "\\begin{frame}[fragile]\\frametitle{%s}" "\\end{frame}"))
> --------------------------------------------------------
>
> The header is the same as from the example.
>
> Thanks,
> Henri-Paul
>
>
>
>
> Henri-Paul Indiogine
> Email: hindiogine@gmail.com
> Running: Ubuntu Linux 10.10, Emacs 24.0.50.1, org-mode 7.3
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>

[-- Attachment #1.2: Type: text/html, Size: 3595 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19 22:02     ` Chris Malone
@ 2011-01-19 22:43       ` Bill Moran
  0 siblings, 0 replies; 14+ messages in thread
From: Bill Moran @ 2011-01-19 22:43 UTC (permalink / raw)
  To: emacs-orgmode

Hi Chris, Jeff

Chris Malone <chris.m.malone <at> gmail.com> writes:

> 
> 
> Hi Bill,I would try upgrading to a newer version of =org-mode= - a lot of
things have been improved since the writing of the version you have.  By
default, in the newer versions, the \maketitle command should be added to the
beginning of your .tex file automatically.  Upgrade and see if this fixes
things.Chris



Upgraded to the latest .deb version of org-mode - 7.4 - and that solved the
title problem - but not the @ problem. 

Thanks 

Bill


> 
> 
> 
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode <at> gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
> 

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-19 22:22   ` Henri-Paul Indiogine
  2011-01-19 22:33     ` Chris Malone
@ 2011-01-20  8:57     ` Eric S Fraga
  1 sibling, 0 replies; 14+ messages in thread
From: Eric S Fraga @ 2011-01-20  8:57 UTC (permalink / raw)
  To: hindiogine; +Cc: emacs-org

Henri-Paul Indiogine <hindiogine@gmail.com> writes:

> Greetings!
>
> I am also having difficulties running Beamer from org-mode.   I am
> running a fully updated Ubuntu with snapshot emacs and a daily updated
> git version of org-mode.
>
> I am not able to get blocks, lists, and colums to work.  I have a
> feeling from Googling quite a bit that the problem is due to some
> interaction between my org-mode header and .emacs.
>
> Unfortunately, the org-mode manual does not state how to configure
> .emacs for Beamer export.  There must be something going on with the
> levels of headers and the B_Block directive.  

You do not need to configure anything for beamer support with recent
(since 7.0 but even earlier) versions of org.

> Here is the relevant part of my .emacs
>
> -------------------------------------------------
> (setq org-export-latex-classes 

[...]

> 	("beamer" "\\documentclass[bigger]{beamer}

This is not needed and will in fact cause problems.  The tutorial
example on Worg should work out of the box except for the already
discussed problems with the @ syntax for alerts.

-- 
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.4 (release_7.4.223.g71650)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Org-beamer problems
@ 2011-01-21  2:31 Bill Moran
  2011-01-21 21:11 ` Eric S Fraga
  0 siblings, 1 reply; 14+ messages in thread
From: Bill Moran @ 2011-01-21  2:31 UTC (permalink / raw)
  To: emacs-orgmode

I have installed the latest (git) version of org-mode and have stripped out all
customizations from  I think. I've copied Eric's two column example from here

http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html

with the headers given there. And I can't get either blocks or columns to work.
There is no block or column command in the latex produced from the org file. 

I guess it's something to do with the value of the variable 

org-export-latex-classes 

but have been unable to find a statement of what that should be. I think I've
undone all customizations of that  variable from earlier attempts but can't be
sure. 

Thanks for your help.

Bill

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-21  2:31 Org-beamer problems Bill Moran
@ 2011-01-21 21:11 ` Eric S Fraga
  2011-01-21 22:29   ` Bill Moran
  2011-01-21 23:25   ` Eric S Fraga
  0 siblings, 2 replies; 14+ messages in thread
From: Eric S Fraga @ 2011-01-21 21:11 UTC (permalink / raw)
  To: Bill Moran; +Cc: emacs-orgmode

Bill Moran <bill1moran@gmail.com> writes:

> I have installed the latest (git) version of org-mode and have stripped out all
> customizations from  I think. I've copied Eric's two column example from here
>
> http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html
>
> with the headers given there. And I can't get either blocks or columns to work.
> There is no block or column command in the latex produced from the org
> file. 

I have no idea what is going on but I can confirm that something is
missing.  If I start emacs with -Q, execute the following

#+begin_src emacs-lisp
(add-to-list 'load-path "~/git/org-mode/lisp")
(require 'org-install)
(require 'org-latex)
#+end_src

visit the small beamer test file I sent to the list earlier today and
export to latex, I get only the title page and the empty outline.
Nothing else.

If I start up with my full initialisation, everything works just fine.

I've gone through my initialisation by eye and cannot see anything that
would make a difference.  I will need to go through this more carefully
as I have many customisations, not only for org...

> I guess it's something to do with the value of the variable 
>
> org-export-latex-classes 

I don't think so.  Although I do customise mine, if I include this in
the above test (-Q start), it makes no difference.  I do not change the
"beamer" entry in any case.

I will play around later tonight and will get back to you then.

-- 
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.4 (release_7.4.231.ge879)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-21 21:11 ` Eric S Fraga
@ 2011-01-21 22:29   ` Bill Moran
  2011-01-21 23:25   ` Eric S Fraga
  1 sibling, 0 replies; 14+ messages in thread
From: Bill Moran @ 2011-01-21 22:29 UTC (permalink / raw)
  To: Eric S Fraga; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 2670 bytes --]

Hi Eric

I've just tried with the totally minimal customization you suggest below -
and your  two-column slide which I had already set up
( I haven't had time to go to the website yet and download the one you
suggest). Now columns are working  in some fashion
but apparently not blocks.  The two column slide is spread across two slides
each with one column.

I'll work on it some more later - and test your slide on the website.

So something else in my emacs customization - which is pretty extensive but
(since yesterday)
has nothing other than vanilla for org-mode (just paths and your
org-emphasis-alist ) -
is causing a problem in producing the columns. I'll go through this later
too and see if I can find it.

Thanks

Bill



On Sat, Jan 22, 2011 at 8:11 AM, Eric S Fraga <e.fraga@ucl.ac.uk> wrote:

> Bill Moran <bill1moran@gmail.com> writes:
>
> > I have installed the latest (git) version of org-mode and have stripped
> out all
> > customizations from  I think. I've copied Eric's two column example from
> here
> >
> > http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html
> >
> > with the headers given there. And I can't get either blocks or columns to
> work.
> > There is no block or column command in the latex produced from the org
> > file.
>
> I have no idea what is going on but I can confirm that something is
> missing.  If I start emacs with -Q, execute the following
>
> #+begin_src emacs-lisp
> (add-to-list 'load-path "~/git/org-mode/lisp")
> (require 'org-install)
> (require 'org-latex)
> #+end_src
>
> visit the small beamer test file I sent to the list earlier today and
> export to latex, I get only the title page and the empty outline.
> Nothing else.
>
> If I start up with my full initialisation, everything works just fine.
>
> I've gone through my initialisation by eye and cannot see anything that
> would make a difference.  I will need to go through this more carefully
> as I have many customisations, not only for org...
>
> > I guess it's something to do with the value of the variable
> >
> > org-export-latex-classes
>
> I don't think so.  Although I do customise mine, if I include this in
> the above test (-Q start), it makes no difference.  I do not change the
> "beamer" entry in any case.
>
> I will play around later tonight and will get back to you then.
>
> --
> : Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
> : using Org-mode version 7.4 (release_7.4.231.ge879)
>



-- 
Bill  Moran
Melbourne Systems Laboratory
Dept of Electrical & Electronic Engineering
University of Melbourne
Parkville, VIC 3010
Australia
----------------------------------------------------------------------------

[-- Attachment #1.2: Type: text/html, Size: 3471 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-21 21:11 ` Eric S Fraga
  2011-01-21 22:29   ` Bill Moran
@ 2011-01-21 23:25   ` Eric S Fraga
  2011-01-22  2:52     ` Bill Moran
  1 sibling, 1 reply; 14+ messages in thread
From: Eric S Fraga @ 2011-01-21 23:25 UTC (permalink / raw)
  To: Bill Moran; +Cc: emacs-orgmode

Eric S Fraga <e.fraga@ucl.ac.uk> writes:

> Bill Moran <bill1moran@gmail.com> writes:
>
>> I have installed the latest (git) version of org-mode and have stripped out all
>> customizations from  I think. I've copied Eric's two column example from here
>>
>> http://orgmode.org/worg/org-tutorials/org-beamer/tutorial.html
>>
>> with the headers given there. And I can't get either blocks or columns to work.
>> There is no block or column command in the latex produced from the org
>> file. 
>
> I have no idea what is going on but I can confirm that something is
> missing.  If I start emacs with -Q, execute the following
>
> #+begin_src emacs-lisp
> (add-to-list 'load-path "~/git/org-mode/lisp")
> (require 'org-install)
> (require 'org-latex)
> #+end_src
>
> visit the small beamer test file I sent to the list earlier today and
> export to latex, I get only the title page and the empty outline.
> Nothing else.

Playing with the following org file:

--8<---------------cut here---------------start------------->8---
#+title: Testing Beamer in Org
#+author: Eric S Fraga
#+DESCRIPTION: 
#+KEYWORDS: 
#+LANGUAGE:  en
#+OPTIONS:   H:5 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
#+OPTIONS:   TeX:t LaTeX:t skip:nil d:nil todo:t pri:nil tags:nil
#+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0 path:http://orgmode.org/org-info.js
#+EXPORT_SELECT_TAGS: export
#+EXPORT_EXCLUDE_TAGS: noexport
#+LINK_UP:   
#+LINK_HOME: 

#+startup: beamer
#+LaTeX_CLASS: beamer
#+LaTeX_CLASS_OPTIONS: [presentation]

#+BEAMER_FRAME_LEVEL: 2

#+startup: fninline

#+COLUMNS: %40ITEM %10BEAMER_env(Env) %10BEAMER_envargs(Env Args) %4BEAMER_col(Col) %10BEAMER_extra(Extra)

* Introduction
** A slide with two + 1 colums
*** Some notes						      :BMCOL:B_block:
    :PROPERTIES:
    :BEAMER_col: 0.5
    :BEAMER_env: block
    :END:
    - some text
    - and some more
    - and yet more
*** More notes					      :BMCOL:B_ignoreheading:
    :PROPERTIES:
    :BEAMER_col: 0.5
    :BEAMER_env: ignoreheading
    :BEAMER_envargs: c<2->
    :END:
    - some important notes
    - and even more important ones
    - and some maths: $\sin^{2}(x)$
*** a concluding block below the columns			      :BMCOL:
    :PROPERTIES:
    :BEAMER_env: example
    :BEAMER_col: 1
    :END:
    This slide should have two columns above this block.
--8<---------------cut here---------------end--------------->8---

everything works just fine with "emacs -Q" and the emacs lisp code I
gave in the previous email.  The change is a subtle one: I got rid of
the "#+STARTUP: oddonly" customisation in the org file and indented all
the headlines to use both odd and even levels.

I have no idea why the =oddonly= setting causes problems.  However, I do
note that the documentation for =org-odd-levels-only= only mentions
=odd= and =oddeven= for possible values of =#+STARTUP= so maybe my use
of =oddonly= is the issue?  I'll leave this to others to comment on
hopefully.

-- 
: Eric S Fraga (GnuPG: 0xC89193D8FFFCF67D) in Emacs 24.0.50.1
: using Org-mode version 7.4 (release_7.4.231.ge879)

^ permalink raw reply	[flat|nested] 14+ messages in thread

* Re: Org-beamer problems
  2011-01-21 23:25   ` Eric S Fraga
@ 2011-01-22  2:52     ` Bill Moran
  0 siblings, 0 replies; 14+ messages in thread
From: Bill Moran @ 2011-01-22  2:52 UTC (permalink / raw)
  To: Eric S Fraga; +Cc: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 2068 bytes --]

Hi Eric

I've just done this - emacs -Q, the minimal .emacs from your previous email,
and your  piece of org/beamer.

It  creates blocks, examples and columns - so it works as it should. Next -
but not immediately - is to find out why my usual .emacs doesn't work.

Thanks for all of your help in sorting this out. I look forward to using
org-mode to create slides.

I'll report if I find the problem.

Bill


On Sat, Jan 22, 2011 at 10:25 AM, Eric S Fraga <e.fraga@ucl.ac.uk> wrote:

> #+title: Testing Beamer in Org
> #+author: Eric S Fraga
> #+DESCRIPTION:
> #+KEYWORDS:
> #+LANGUAGE:  en
> #+OPTIONS:   H:5 num:t toc:t \n:nil @:t ::t |:t ^:t -:t f:t *:t <:t
> #+OPTIONS:   TeX:t LaTeX:t skip:nil d:nil todo:t pri:nil tags:nil
> #+INFOJS_OPT: view:nil toc:nil ltoc:t mouse:underline buttons:0 path:
> http://orgmode.org/org-info.js
> #+EXPORT_SELECT_TAGS: export
> #+EXPORT_EXCLUDE_TAGS: noexport
> #+LINK_UP:
> #+LINK_HOME:
>
> #+startup: beamer
> #+LaTeX_CLASS: beamer
> #+LaTeX_CLASS_OPTIONS: [presentation]
>
> #+BEAMER_FRAME_LEVEL: 2
>
> #+startup: fninline
>
> #+COLUMNS: %40ITEM %10BEAMER_env(Env) %10BEAMER_envargs(Env Args)
> %4BEAMER_col(Col) %10BEAMER_extra(Extra)
>
> * Introduction
> ** A slide with two + 1 colums
> *** Some notes
>  :BMCOL:B_block:
>    :PROPERTIES:
>    :BEAMER_col: 0.5
>    :BEAMER_env: block
>    :END:
>    - some text
>    - and some more
>    - and yet more
> *** More notes
>  :BMCOL:B_ignoreheading:
>    :PROPERTIES:
>    :BEAMER_col: 0.5
>    :BEAMER_env: ignoreheading
>    :BEAMER_envargs: c<2->
>    :END:
>    - some important notes
>    - and even more important ones
>    - and some maths: $\sin^{2}(x)$
> *** a concluding block below the columns
>  :BMCOL:
>    :PROPERTIES:
>    :BEAMER_env: example
>    :BEAMER_col: 1
>    :END:
>    This slide should have two columns above this block.
>



-- 
Bill  Moran
Melbourne Systems Laboratory
Dept of Electrical & Electronic Engineering
University of Melbourne
Parkville, VIC 3010
Australia
----------------------------------------------------------------------------

[-- Attachment #1.2: Type: text/html, Size: 2780 bytes --]

[-- Attachment #2: Type: text/plain, Size: 201 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 14+ messages in thread

end of thread, other threads:[~2011-01-22  2:52 UTC | newest]

Thread overview: 14+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-01-21  2:31 Org-beamer problems Bill Moran
2011-01-21 21:11 ` Eric S Fraga
2011-01-21 22:29   ` Bill Moran
2011-01-21 23:25   ` Eric S Fraga
2011-01-22  2:52     ` Bill Moran
  -- strict thread matches above, loose matches on Subject: below --
2011-01-19  7:03 Bill Moran
2011-01-19 15:55 ` Jeff Horn
2011-01-19 22:22   ` Henri-Paul Indiogine
2011-01-19 22:33     ` Chris Malone
2011-01-20  8:57     ` Eric S Fraga
     [not found] ` <AANLkTi=7TkcFBVGc90SkTBHFjKx5j7PgHbia=ZkNRxYS@mail.gmail.com>
2011-01-19 15:58   ` John Hendy
2011-01-19 16:36 ` Eric S Fraga
2011-01-19 21:34   ` Bill Moran
2011-01-19 22:02     ` Chris Malone
2011-01-19 22:43       ` Bill Moran

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).