* Using column view on a sparse tree displaying only a few tags. @ 2008-04-03 17:16 Jose Robins 2008-04-03 17:52 ` Bernt Hansen 0 siblings, 1 reply; 8+ messages in thread From: Jose Robins @ 2008-04-03 17:16 UTC (permalink / raw) To: org-mode [-- Attachment #1.1: Type: text/plain, Size: 537 bytes --] Let's say I have a org tree with some tasks tagged with the keyword ":today:". Now I do a sparse tree matching the today tag and this would limit the display to only items with tag "today". Now if I would like to do a column view on that sparse tree by doing C-c C-x C-c. However this does not seem to limit the column display to only the headlines with the tag "today". Is it possible to achieve what I'm trying to do? Is there any way to filter out (i.e hide) headlines in the column view based on some criteria? Thanks, Jose [-- Attachment #1.2: Type: text/html, Size: 765 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Using column view on a sparse tree displaying only a few tags. 2008-04-03 17:16 Using column view on a sparse tree displaying only a few tags Jose Robins @ 2008-04-03 17:52 ` Bernt Hansen 2008-04-03 20:54 ` Jose Robins 0 siblings, 1 reply; 8+ messages in thread From: Bernt Hansen @ 2008-04-03 17:52 UTC (permalink / raw) To: wulfhomme13-rook; +Cc: org-mode Jose Robins <wulfhomme13-rook@yahoo.com> writes: > Let's say I have a org tree with some tasks tagged with the keyword ":today:". > Now I do a sparse tree matching the today tag and this would limit the display > to only items with tag "today". Tag your tasks with :today: then do an agenda view tag match for today C-c a 1 m today RET Tag inheritance will control if subtasks are included or not. > > Now if I would like to do a column view on that sparse tree by doing C-c C-x > C-c. However this does not seem to limit the column display to only the > headlines with the tag "today". Is it possible to achieve what I'm trying to > do? Is there any way to filter out (i.e hide) headlines in the column view > based on some criteria? Then C-c C-x C-c in the agenda view HTH, Bernt ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Using column view on a sparse tree displaying only a few tags. 2008-04-03 17:52 ` Bernt Hansen @ 2008-04-03 20:54 ` Jose Robins 2008-04-03 20:58 ` Bernt Hansen 2008-04-04 10:28 ` Carsten Dominik 0 siblings, 2 replies; 8+ messages in thread From: Jose Robins @ 2008-04-03 20:54 UTC (permalink / raw) To: Bernt Hansen; +Cc: org-mode [-- Attachment #1.1: Type: text/plain, Size: 1335 bytes --] Thanks Bernt, that works! However the only thing is that I've defined COLUMNS for the whole file using the #+COLUMNS keyword at the top of the file. I guess those properties are not being considered in the column view on the agenda buffer. It comes up with the default column properties.... I guess the only way is to redefine the standard column properties, so that the column properties that I want are displayed in the agenda view as well... thanks, Jose Bernt Hansen wrote: > Jose Robins <wulfhomme13-rook@yahoo.com> writes: > > >> Let's say I have a org tree with some tasks tagged with the keyword ":today:". >> Now I do a sparse tree matching the today tag and this would limit the display >> to only items with tag "today". >> > > Tag your tasks with :today: then do an agenda view tag match for today > > C-c a 1 m today RET > > Tag inheritance will control if subtasks are included or not. > > >> Now if I would like to do a column view on that sparse tree by doing C-c C-x >> C-c. However this does not seem to limit the column display to only the >> headlines with the tag "today". Is it possible to achieve what I'm trying to >> do? Is there any way to filter out (i.e hide) headlines in the column view >> based on some criteria? >> > > Then C-c C-x C-c in the agenda view > > HTH, > Bernt > > [-- Attachment #1.2: Type: text/html, Size: 1969 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Using column view on a sparse tree displaying only a few tags. 2008-04-03 20:54 ` Jose Robins @ 2008-04-03 20:58 ` Bernt Hansen 2008-04-04 10:28 ` Carsten Dominik 1 sibling, 0 replies; 8+ messages in thread From: Bernt Hansen @ 2008-04-03 20:58 UTC (permalink / raw) To: wulfhomme13-rook; +Cc: org-mode Jose Robins <wulfhomme13-rook@yahoo.com> writes: > However the only thing is that I've defined COLUMNS for the whole file using > the #+COLUMNS keyword at the top of the file. I guess those properties are not > being considered in the column view on the agenda buffer. It comes up with the > default column properties.... I guess the only way is to redefine the standard > column properties, so that the column properties that I want are displayed in > the agenda view as well... I use the same column definition everywhere so I have this in my .emacs (setq org-columns-default-format "%40ITEM(Task) %17Effort(Estimated Effort){:} %CLOCKSUM") That works great for me... Your mileage may vary :) Bernt ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Re: Using column view on a sparse tree displaying only a few tags. 2008-04-03 20:54 ` Jose Robins 2008-04-03 20:58 ` Bernt Hansen @ 2008-04-04 10:28 ` Carsten Dominik 2008-05-28 15:15 ` Adam Spiers 1 sibling, 1 reply; 8+ messages in thread From: Carsten Dominik @ 2008-04-04 10:28 UTC (permalink / raw) To: wulfhomme13-rook; +Cc: Bernt Hansen, org-mode [-- Attachment #1.1: Type: text/plain, Size: 2061 bytes --] On Apr 3, 2008, at 10:54 PM, Jose Robins wrote: > Thanks Bernt, that works! > However the only thing is that I've defined COLUMNS for the whole > file using the #+COLUMNS keyword at the top of the file. I guess > those properties are not being considered in the column view on the > agenda buffer. It comes up with the default column properties.... I > guess the only way is to redefine the standard column properties, so > that the column properties that I want are displayed in the agenda > view as well... This is now fixed. Column view in the agenda will now use the column format appropriate for the entry at point, or for the first entry in the agenda view. I.e. it will go back to the original buffer and take the format from a property, a COLUMNS line, or, if these fail, from the default set in org-columns-default-format'. This change is up in the git repo. - Carsten > > > thanks, > Jose > > Bernt Hansen wrote: >> >> Jose Robins <wulfhomme13-rook@yahoo.com> writes: >> >> >>> Let's say I have a org tree with some tasks tagged with the >>> keyword ":today:". >>> Now I do a sparse tree matching the today tag and this would limit >>> the display >>> to only items with tag "today". >>> >> Tag your tasks with :today: then do an agenda view tag match for >> today >> >> C-c a 1 m today RET >> >> Tag inheritance will control if subtasks are included or not. >> >> >>> Now if I would like to do a column view on that sparse tree by >>> doing C-c C-x >>> C-c. However this does not seem to limit the column display to >>> only the >>> headlines with the tag "today". Is it possible to achieve what >>> I'm trying to >>> do? Is there any way to filter out (i.e hide) headlines in the >>> column view >>> based on some criteria? >>> >> Then C-c C-x C-c in the agenda view >> >> HTH, >> Bernt >> >> > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode [-- Attachment #1.2: Type: text/html, Size: 3063 bytes --] [-- Attachment #2: Type: text/plain, Size: 204 bytes --] _______________________________________________ Emacs-orgmode mailing list Remember: use `Reply All' to send replies to the list. Emacs-orgmode@gnu.org http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Re: Using column view on a sparse tree displaying only a few tags. 2008-04-04 10:28 ` Carsten Dominik @ 2008-05-28 15:15 ` Adam Spiers 2008-05-28 17:26 ` Carsten Dominik 0 siblings, 1 reply; 8+ messages in thread From: Adam Spiers @ 2008-05-28 15:15 UTC (permalink / raw) To: emacs-orgmode On Fri, Apr 04, 2008 at 12:28:32PM +0200, Carsten Dominik wrote: > On Apr 3, 2008, at 10:54 PM, Jose Robins wrote: > >Thanks Bernt, that works! > >However the only thing is that I've defined COLUMNS for the whole > >file using the #+COLUMNS keyword at the top of the file. I guess > >those properties are not being considered in the column view on the > >agenda buffer. It comes up with the default column properties.... I > >guess the only way is to redefine the standard column properties, so > >that the column properties that I want are displayed in the agenda > >view as well... > > This is now fixed. Column view in the agenda will now use the > column format appropriate for the entry at point, or for the first > entry in the agenda view. I.e. it will go back to the original > buffer and take the format from a property, a COLUMNS line, or, if > these fail, from the default set in org-columns-default-format'. > > This change is up in the git repo. Is there a regression here, or am I doing something wrong? I have #+COLUMNS: %TODO %3PRIORITY %40ITEM(Task) %17Effort(ETC){:} CLOCKSUM(Taken) %TAGS(Tags) near the bottom of one of my four agenda files, but when I look at the agenda and turn on column view, it still uses org-columns-default-format. This is with a fairly recent git pull. ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Re: Using column view on a sparse tree displaying only a few tags. 2008-05-28 15:15 ` Adam Spiers @ 2008-05-28 17:26 ` Carsten Dominik 2008-05-28 22:06 ` Adam Spiers 0 siblings, 1 reply; 8+ messages in thread From: Carsten Dominik @ 2008-05-28 17:26 UTC (permalink / raw) To: Adam Spiers; +Cc: emacs-orgmode This is no regression. In the agenda, org will use the format applicable to the first item, since it has to use the same for all lines. If that first item is from a file that has no columns format, it will use the default. Just set the default format and not the file- local ones. - Carsten On May 28, 2008, at 5:15 PM, Adam Spiers wrote: > On Fri, Apr 04, 2008 at 12:28:32PM +0200, Carsten Dominik wrote: >> On Apr 3, 2008, at 10:54 PM, Jose Robins wrote: >>> Thanks Bernt, that works! >>> However the only thing is that I've defined COLUMNS for the whole >>> file using the #+COLUMNS keyword at the top of the file. I guess >>> those properties are not being considered in the column view on the >>> agenda buffer. It comes up with the default column properties.... I >>> guess the only way is to redefine the standard column properties, so >>> that the column properties that I want are displayed in the agenda >>> view as well... >> >> This is now fixed. Column view in the agenda will now use the >> column format appropriate for the entry at point, or for the first >> entry in the agenda view. I.e. it will go back to the original >> buffer and take the format from a property, a COLUMNS line, or, if >> these fail, from the default set in org-columns-default-format'. >> >> This change is up in the git repo. > > Is there a regression here, or am I doing something wrong? I have > > #+COLUMNS: %TODO %3PRIORITY %40ITEM(Task) %17Effort(ETC){:} > CLOCKSUM(Taken) %TAGS(Tags) > > near the bottom of one of my four agenda files, but when I look at the > agenda and turn on column view, it still uses org-columns-default- > format. > This is with a fairly recent git pull. > > > _______________________________________________ > Emacs-orgmode mailing list > Remember: use `Reply All' to send replies to the list. > Emacs-orgmode@gnu.org > http://lists.gnu.org/mailman/listinfo/emacs-orgmode ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Re: Using column view on a sparse tree displaying only a few tags. 2008-05-28 17:26 ` Carsten Dominik @ 2008-05-28 22:06 ` Adam Spiers 0 siblings, 0 replies; 8+ messages in thread From: Adam Spiers @ 2008-05-28 22:06 UTC (permalink / raw) To: emacs-orgmode On Wed, May 28, 2008 at 07:26:35PM +0200, Carsten Dominik wrote: > This is no regression. In the agenda, org will use the format > applicable to the first item, since it has to use the same for all > lines. If that first item is from a file that has no columns format, > it will use the default. Just set the default format and not the file- > local ones. Ah, makes sense! Thanks. ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2008-05-28 22:06 UTC | newest] Thread overview: 8+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-04-03 17:16 Using column view on a sparse tree displaying only a few tags Jose Robins 2008-04-03 17:52 ` Bernt Hansen 2008-04-03 20:54 ` Jose Robins 2008-04-03 20:58 ` Bernt Hansen 2008-04-04 10:28 ` Carsten Dominik 2008-05-28 15:15 ` Adam Spiers 2008-05-28 17:26 ` Carsten Dominik 2008-05-28 22:06 ` Adam Spiers
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).