emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* #+call ?
@ 2010-11-01  3:44 Thomas S. Dye
  2010-11-01  5:40 ` Noorul Islam K M
  0 siblings, 1 reply; 6+ messages in thread
From: Thomas S. Dye @ 2010-11-01  3:44 UTC (permalink / raw)
  To: Org Mode

Aloha all,

I'm expecting to see the file bar.pdf output.

#+srcname: single-date
#+begin_src R :results output :file foo.pdf
   library(ggplot2)
   z <- read.csv(file = x)
   g <-  ggplot(z, aes(x=1950 + cal.BP, y=Posterior.probability))
   g + geom_bar(stat='identity') + xlab("Year AD") +
     ylab("Probability")
#+end_src

#+call: single-date(x="alpha-2.csv") :file bar.pdf :height 4

#+results: single-date(x="alpha-2.csv")
[[file:foo.pdf]]

Also, the :height header argument doesn't have any effect.

I want the single-date source block to be a general function that I  
can call several times from an Org-mode file that I hope to distribute  
as a piece of reproducible research.  There will be separate #+calls  
for each of the graphs in the paper.

Apologies in advance if the answer is obvious.  I'm using Org-mode  
version 7.02trans (release_7.02.37.g52fb)

All the best,
Tom

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: #+call ?
  2010-11-01  3:44 #+call ? Thomas S. Dye
@ 2010-11-01  5:40 ` Noorul Islam K M
  2010-11-01  6:21   ` Thomas S. Dye
  0 siblings, 1 reply; 6+ messages in thread
From: Noorul Islam K M @ 2010-11-01  5:40 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: Org Mode

"Thomas S. Dye" <tsd@tsdye.com> writes:

> Aloha all,
>
> I'm expecting to see the file bar.pdf output.
>
> #+srcname: single-date
> #+begin_src R :results output :file foo.pdf
>   library(ggplot2)
>   z <- read.csv(file = x)
>   g <-  ggplot(z, aes(x=1950 + cal.BP, y=Posterior.probability))
>   g + geom_bar(stat='identity') + xlab("Year AD") +
>     ylab("Probability")
> #+end_src
>
> #+call: single-date(x="alpha-2.csv") :file bar.pdf :height 4
>
> #+results: single-date(x="alpha-2.csv")
> [[file:foo.pdf]]
>
> Also, the :height header argument doesn't have any effect.
>
> I want the single-date source block to be a general function that I
> can call several times from an Org-mode file that I hope to distribute
> as a piece of reproducible research.  There will be separate #+calls
> for each of the graphs in the paper.
>
> Apologies in advance if the answer is obvious.  I'm using Org-mode
> version 7.02trans (release_7.02.37.g52fb)
>

I think there was similar discussion already in this list. 

Take a look at

http://www.mail-archive.com/emacs-orgmode@gnu.org/msg32516.html

Thanks and Regards
Noorul

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: #+call ?
  2010-11-01  5:40 ` Noorul Islam K M
@ 2010-11-01  6:21   ` Thomas S. Dye
  2010-11-01  6:24     ` Thomas S. Dye
  0 siblings, 1 reply; 6+ messages in thread
From: Thomas S. Dye @ 2010-11-01  6:21 UTC (permalink / raw)
  To: Noorul Islam K M; +Cc: Org Mode


On Oct 31, 2010, at 7:40 PM, Noorul Islam K M wrote:

> "Thomas S. Dye" <tsd@tsdye.com> writes:
>
>> Aloha all,
>>
>> I'm expecting to see the file bar.pdf output.
>>
>> #+srcname: single-date
>> #+begin_src R :results output :file foo.pdf
>>  library(ggplot2)
>>  z <- read.csv(file = x)
>>  g <-  ggplot(z, aes(x=1950 + cal.BP, y=Posterior.probability))
>>  g + geom_bar(stat='identity') + xlab("Year AD") +
>>    ylab("Probability")
>> #+end_src
>>
>> #+call: single-date(x="alpha-2.csv") :file bar.pdf :height 4
>>
>> #+results: single-date(x="alpha-2.csv")
>> [[file:foo.pdf]]
>>
>> Also, the :height header argument doesn't have any effect.
>>
>> I want the single-date source block to be a general function that I
>> can call several times from an Org-mode file that I hope to  
>> distribute
>> as a piece of reproducible research.  There will be separate #+calls
>> for each of the graphs in the paper.
>>
>> Apologies in advance if the answer is obvious.  I'm using Org-mode
>> version 7.02trans (release_7.02.37.g52fb)
>>
>
> I think there was similar discussion already in this list.
>
> Take a look at
>
> http://www.mail-archive.com/emacs-orgmode@gnu.org/msg32516.html
>
> Thanks and Regards
> Noorul

Aloha Noorul,

There is a similar question, but no answer that I can find.  Did you  
see an answer there?

All the best,
Tom

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: #+call ?
  2010-11-01  6:21   ` Thomas S. Dye
@ 2010-11-01  6:24     ` Thomas S. Dye
  2010-11-05  8:40       ` Sébastien Vauban
  0 siblings, 1 reply; 6+ messages in thread
From: Thomas S. Dye @ 2010-11-01  6:24 UTC (permalink / raw)
  To: Thomas S. Dye; +Cc: Org Mode, Noorul Islam K M

Replying to his own message:

I found Eric's reply.  Sorry for the noise.

All the best,
Tom

On Oct 31, 2010, at 8:21 PM, Thomas S. Dye wrote:

>
> On Oct 31, 2010, at 7:40 PM, Noorul Islam K M wrote:
>
>> "Thomas S. Dye" <tsd@tsdye.com> writes:
>>
>>> Aloha all,
>>>
>>> I'm expecting to see the file bar.pdf output.
>>>
>>> #+srcname: single-date
>>> #+begin_src R :results output :file foo.pdf
>>> library(ggplot2)
>>> z <- read.csv(file = x)
>>> g <-  ggplot(z, aes(x=1950 + cal.BP, y=Posterior.probability))
>>> g + geom_bar(stat='identity') + xlab("Year AD") +
>>>   ylab("Probability")
>>> #+end_src
>>>
>>> #+call: single-date(x="alpha-2.csv") :file bar.pdf :height 4
>>>
>>> #+results: single-date(x="alpha-2.csv")
>>> [[file:foo.pdf]]
>>>
>>> Also, the :height header argument doesn't have any effect.
>>>
>>> I want the single-date source block to be a general function that I
>>> can call several times from an Org-mode file that I hope to  
>>> distribute
>>> as a piece of reproducible research.  There will be separate #+calls
>>> for each of the graphs in the paper.
>>>
>>> Apologies in advance if the answer is obvious.  I'm using Org-mode
>>> version 7.02trans (release_7.02.37.g52fb)
>>>
>>
>> I think there was similar discussion already in this list.
>>
>> Take a look at
>>
>> http://www.mail-archive.com/emacs-orgmode@gnu.org/msg32516.html
>>
>> Thanks and Regards
>> Noorul
>
> Aloha Noorul,
>
> There is a similar question, but no answer that I can find.  Did you  
> see an answer there?
>
> All the best,
> Tom

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: #+call ?
  2010-11-01  6:24     ` Thomas S. Dye
@ 2010-11-05  8:40       ` Sébastien Vauban
  2010-11-05 10:43         ` Sébastien Vauban
  0 siblings, 1 reply; 6+ messages in thread
From: Sébastien Vauban @ 2010-11-05  8:40 UTC (permalink / raw)
  To: emacs-orgmode-mXXj517/zsQ

Hi Thomas,

"Thomas S. Dye" wrote:
>> There is a similar question, but no answer that I can find.  Did you see an
>> answer there?
>
> Replying to his own message:
>
> I found Eric's reply.  Sorry for the noise.

Could you put a link to that message, or the update code block? I also have
problems finding it ;-)  Thanks.

Best regards,
  Seb

-- 
Sébastien Vauban


_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode-mXXj517/zsQ@public.gmane.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: #+call ?
  2010-11-05  8:40       ` Sébastien Vauban
@ 2010-11-05 10:43         ` Sébastien Vauban
  0 siblings, 0 replies; 6+ messages in thread
From: Sébastien Vauban @ 2010-11-05 10:43 UTC (permalink / raw)
  To: emacs-orgmode-mXXj517/zsQ

Hello,

Sébastien Vauban wrote:
> "Thomas S. Dye" wrote:
>>> There is a similar question, but no answer that I can find.  Did you see an
>>> answer there?
>>
>> I found Eric's reply.  Sorry for the noise.
>
> Could you put a link to that message, or the update code block? I also have
> problems finding it ;-)  Thanks.

Found it:

 [[http://mid.gmane.org/87hbg7fvzo.fsf%40gmail.com][Email from Eric Schulte: Re: org babel and alternative]]
 [2010-10-27 Wed 18:20]

Best regards,
  Seb

-- 
Sébastien Vauban


_______________________________________________
Emacs-orgmode mailing list
Please use `Reply All' to send replies to the list.
Emacs-orgmode-mXXj517/zsQ@public.gmane.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2010-11-05 10:43 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-01  3:44 #+call ? Thomas S. Dye
2010-11-01  5:40 ` Noorul Islam K M
2010-11-01  6:21   ` Thomas S. Dye
2010-11-01  6:24     ` Thomas S. Dye
2010-11-05  8:40       ` Sébastien Vauban
2010-11-05 10:43         ` Sébastien Vauban

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).