emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Tutorial to create a new exporter ?
@ 2015-06-08 10:33 Xavier
  2015-06-08 12:44 ` John Kitchin
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Xavier @ 2015-06-08 10:33 UTC (permalink / raw)
  To: emacs-orgmode

Hello,

I am tracking my running workouts in a orgmode managed file. I'd like to
export these entries to an online service (dailymile).
I am looking for a good starter kit to create this exporter. Do you have
something ?

Regards
-- 
  Xavier
  xavier@maillard.im

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Tutorial to create a new exporter ?
  2015-06-08 10:33 Tutorial to create a new exporter ? Xavier
@ 2015-06-08 12:44 ` John Kitchin
  2015-06-08 12:49 ` Rasmus
  2015-06-08 16:06 ` Robert Klein
  2 siblings, 0 replies; 4+ messages in thread
From: John Kitchin @ 2015-06-08 12:44 UTC (permalink / raw)
  To: Xavier; +Cc: emacs-orgmode

Maybe this will get you started:
http://orgmode.org/worg/exporters/filter-markup.html

Xavier writes:

> Hello,
>
> I am tracking my running workouts in a orgmode managed file. I'd like to
> export these entries to an online service (dailymile).
> I am looking for a good starter kit to create this exporter. Do you have
> something ?
>
> Regards

--
Professor John Kitchin
Doherty Hall A207F
Department of Chemical Engineering
Carnegie Mellon University
Pittsburgh, PA 15213
412-268-7803
@johnkitchin
http://kitchingroup.cheme.cmu.edu

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Tutorial to create a new exporter ?
  2015-06-08 10:33 Tutorial to create a new exporter ? Xavier
  2015-06-08 12:44 ` John Kitchin
@ 2015-06-08 12:49 ` Rasmus
  2015-06-08 16:06 ` Robert Klein
  2 siblings, 0 replies; 4+ messages in thread
From: Rasmus @ 2015-06-08 12:49 UTC (permalink / raw)
  To: emacs-orgmode

Xavier <xavier@maillard.im> writes:

> I am tracking my running workouts in a orgmode managed file. I'd like to
> export these entries to an online service (dailymile).
> I am looking for a good starter kit to create this exporter. Do you have
> something ?

What is there file format like?  Perhaps look at how ox-ascii or ox-html
works.  Perhaps you will even be able to use a derived backend if the
format is close one of the existing backends.

Rasmus

-- 
A page of history is worth a volume of logic

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: Tutorial to create a new exporter ?
  2015-06-08 10:33 Tutorial to create a new exporter ? Xavier
  2015-06-08 12:44 ` John Kitchin
  2015-06-08 12:49 ` Rasmus
@ 2015-06-08 16:06 ` Robert Klein
  2 siblings, 0 replies; 4+ messages in thread
From: Robert Klein @ 2015-06-08 16:06 UTC (permalink / raw)
  To: Xavier, emacs-orgmode

Hi,

I once tried to write a tutorial for creating a derived backend, but
didn't find the time to finish it.  I put the material so far below.

When I began writing my ox-blog exporter (github.com/roklein/ox-blog) I
think I began with the s5 exporter in org's source contrib/lisp/ox-s5.el.

If you need to export to a format an existing exporter already provides
(at least in part) you will want to create a derived exporter (using the
`org-export-define-derived-backend').  For a totally new format (e.g.
rtf) you' want to write an independent exporter using
`org-export-define-backend'.

Comprehensive documentation for both functions is provided in the source
code (lisp/ox.el)

The non-derived exporters for html and latex (lisp/ox-html.el and
lisp/ox-latex.el) are also very good as examples.


Best regards
Robert



* Minimal derived exporter


A minimal derived exporter providing  capabilities of the HTML
exporter.

Please compare the code to the =org-export-define-backend= call in
=org-mode/lisp/ox-html.el=.  The =:menu-entry= part is very similar,
in fact I copied the code for the menu entries from the =:menu-entry=
line downward omitting the =?h= and =?o= entries.  The other change is
the key =2= instead of =h= for the original HTML exporter.

#+begin_src emacs-lisp :tangle ox-html-2.el
  (require 'ox-html)

  (org-export-define-derived-backend
   'html-2 'html
   :menu-entry
   '(?2 "Export w/ minimal derived HTML"
        ((?H "To temporary buffer" org-html-export-as-html))))

  (provide 'ox-html-2)
#+end_src

The derived back-end in the example calls the same exporting function
as the HTML back-end does for exporting to a temporary buffer,
=org-html-export-as-html=.

The minimal derived exporter is a new name and a menu entry for
calling the new exporter.

This exporter offers nothing the HTML exporter doesn't.



In the next example we will “write” an exporting function of our own
--- well, copy, rename, and adapt the =org-html-export-as-html=
function from =org-mode/lisp/ox-html.el=.



* Defining export for an org-mode element

In this example we will look at a derived backend which produces the
content of a weblog post in a temporary buffer.

Blogs at e.g. wordpress.com allow syntax highliging using the Syntax
Highlighter written by Alex Gorbatchev.

Our derived exporter will create the text of the blog post and source
code blocks will be marked up for Syntax Highlighter instead of
org-mode's internal mark-up.

You will have to copy the export in the temporary buffer and paste it
into the wordpress blog editor, though.[fn:: We will come back to
weblog exporting again, later.  You might want to write a derived
exporter in this style for something you need every one in a while,
where you don't mind a bit of additional effort.  For daily tasks you
will want something more elaborate.  In web log exporting this would
include the exporter posting to the weblog.]


** Defining the derived backend.


At first we define the backend again.  In comparison to the html-2
backend above the options to export to file and export to file and
open are removed.

In addition we have one entry in the =:translate-alist=: for exporting
source blocks the function =wp-dot-com-src-block= will be used.

#+begin_src emacs-lisp :tangle wp-dot-com-buffer.el
  (require 'ox-html)

  (org-export-define-derived-backend
   'wp-dot-com-buffer 'html
   :menu-entry
   '(?3 "Export w/ minimal derived HTML"
        ((?H "To temporary buffer" org-wp-dot-com-export-as-html)))
   :translate-alist
   '((src-block . wp-dot-com-src-block)))
#+end_src


** language identifier mapping
The Syntax Highlighter uses sometimes other language identifiers for
source blocks than org-mode.  For example, where org-mode uses =sh=,
Syntax Highlighter uses =bash=.

We're putting the mappings in an alist for later use.

#+begin_src emacs-lisp :tangle wp-dot-com-buffer.el
  (defconst wp-dot-com-language-terms
    '(("R" . "r")
      ("emacs-lisp" . "lisp")
      ("elisp" . "lisp")
      ("sh" . "bash")))

  ; (cdr (assoc "sh" wp-dot-com-language-terms))
  ; (cdr (assoc (org-element-property :language src-block)
wp-dot-com-language-terms)
#+end_src


** exporting source code blocks
The source code exporting function, =wp-dot-com-src-block=, is
modelled on =org-html-src-block= in =org-mode/lisp/ox-html.el=.

To keep things simple, the caption and label code is deleted.  The
language identifier is mapped using the mapping defined in the alist
above. The HTML-formatting of the source code is removed, instead of
=org-html-format-code= we use =org-export-unravel-code=.  At last the
=pre= formatting in angles is changed to =code= in brackets.

#+begin_src emacs-lisp :tangle wp-dot-com-buffer.el
  (defun wp-dot-com-src-block (src-block contents info)
      "Transcode a SRC-BLOCK element from Org to HTML.
  CONTENTS holds the contents of the item.  INFO is a plist holding
  contextual information."
    (if (org-export-read-attribute :attr_html src-block :textarea)
        (org-html--textarea-block src-block)
      (let ((language-term
             (or (cdr (assoc (org-element-property :language src-block)
                             wp-dot-com-language-terms))
                 (org-element-property :language src-block)))
            (code (car (org-export-unravel-code src-block))))
        (if (not language-term) (format "<pre
class=\"example\"%s>\n%s</pre>" label code)
          (format
           "<div class=\"org-src-container\">\n%s\n</div>"
           (format "\n[code lang=\"%s\"]%s[/code]" language-term code))))))
#+end_src

** export function for the derived backend
At the end of this example we define the export function
=org-wp-dot-com-export-as-html=.

- mostly a copy of org-html-export-as-html
- instead of passing 'body-only to org-export-as pass t, as we only
  need the body for the web log
#+begin_src emacs-lisp :tangle wp-dot-com-buffer.el

  (defun org-wp-dot-com-export-as-html
    (&optional async subtreep visible-only body-only ext-plist)
    "Export current buffer to an HTML buffer.

  If narrowing is active in the current buffer, only export its
  narrowed part.

  If a region is active, export that region.

  A non-nil optional argument ASYNC means the process should happen
  asynchronously.  The resulting buffer should be accessible
  through the `org-export-stack' interface.

  When optional argument SUBTREEP is non-nil, export the sub-tree
  at point, extracting information from the headline properties
  first.

  When optional argument VISIBLE-ONLY is non-nil, don't export
  contents of hidden elements.

  When optional argument BODY-ONLY is non-nil, only write code
  between \"<body>\" and \"</body>\" tags.

  EXT-PLIST, when provided, is a property list with external
  parameters overriding Org default settings, but still inferior to
  file-local settings.

  Export is done in a buffer named \"*Org HTML Export*\", which
  will be displayed when `org-export-show-temporary-export-buffer'
  is non-nil."
    (interactive)
    (if async
        (org-export-async-start
            (lambda (output)
              (with-current-buffer (get-buffer-create "*Org HTML Export*")
                (erase-buffer)
                (insert output)
                (goto-char (point-min))
                (set-auto-mode t)
                (org-export-add-to-stack (current-buffer)
'wp-dot-com-buffer)))
          `(org-export-as 'wp-dot-com-buffer ,subtreep ,visible-only ,t
',ext-plist))
      (let ((outbuf (org-export-to-buffer
                     'wp-dot-com-buffer "*Org HTML Export*"
                     subtreep visible-only body-only ext-plist)))
        ;; Set major mode.
        (with-current-buffer outbuf (set-auto-mode t))
        (when org-export-show-temporary-export-buffer
          (switch-to-buffer-other-window outbuf)))))


  (provide 'ox-wp-dot-com-buffer)

#+end_src


* Using our own attributes

#+BEGIN_EXAMPLE
  #+ATTR_MYEXPORTER
#+END_EXAMPLE

#+begin_src elisp
  (org-export-read-attribute :attr_myexporter :background)
#+end_src

On 06/08/2015 12:33 PM, Xavier wrote:
> Hello,
> 
> I am tracking my running workouts in a orgmode managed file. I'd like to
> export these entries to an online service (dailymile).
> I am looking for a good starter kit to create this exporter. Do you have
> something ?
> 
> Regards
> 

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2015-06-08 16:06 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-06-08 10:33 Tutorial to create a new exporter ? Xavier
2015-06-08 12:44 ` John Kitchin
2015-06-08 12:49 ` Rasmus
2015-06-08 16:06 ` Robert Klein

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).