From: Rainer M Krug <r.m.krug@gmail.com>
To: Eric Schulte <schulte.eric@gmail.com>
Cc: emacs-orgmode <emacs-orgmode@gnu.org>
Subject: Re: [BABEL][BUG] Tangle incorrect with variables
Date: Thu, 31 Mar 2011 08:53:24 +0200 [thread overview]
Message-ID: <4D9424E4.1090003@gmail.com> (raw)
In-Reply-To: <87y63wqs5h.fsf@gmail.com>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
On 30/03/11 22:17, Eric Schulte wrote:
> Hi Rainer,
>
> When I tangle this code block (just slightly reformatted for my own
> readability)
>
> #+headers: :var STATE=(vc-state (or (buffer-file-name) org-current-export-file))
> #+headers: :var REV=(vc-working-revision (or (buffer-file-name) org-current-export-file))
> #+begin_src sh :tangle yes
> rm -rf ./R
> rm -f ./spreadSim.sub
> REVISION=$REV.$STATE
> tar -xf nsa.$REVISION.tar.gz
> $HOME/R/R/R-2.12.0/bin/Rscript --vanilla -e
> "source('./R/generateLatinHypercubeScenarios.R'); doIt()"
> for SCENARIO in ./R/scenarios/*.R; do
> export SCENARIO=${SCENARIO#./R/scenarios/}
> qsub nsa.sub
> done
> #+end_src
>
> I get the following tangled output
>
> --8<---------------cut here---------------start------------->8---
>
> REV=$(cat <<'BABEL_TABLE'
> master
> BABEL_TABLE
> )
> STATE=$(cat <<'BABEL_TABLE'
> edited
> BABEL_TABLE
> )
> rm -rf ./R
> rm -f ./spreadSim.sub
> REVISION=$REV.$STATE
> tar -xf nsa.$REVISION.tar.gz
> $HOME/R/R/R-2.12.0/bin/Rscript --vanilla -e
> "source('./R/generateLatinHypercubeScenarios.R'); doIt()"
> for SCENARIO in ./R/scenarios/*.R; do
> export SCENARIO=${SCENARIO#./R/scenarios/}
> qsub nsa.sub
> done
> --8<---------------cut here---------------end--------------->8---
>
> Which looks right to me. Could it be something specific about your
> setup which is causing this issue?
Sorry - I did not relize that the way the variables are inserted has
changed - I should have tried the script before asking. It works fine.
Sorry about the noise.
By the way: using
#+headers:
makes the source look much nicer - never used it before, but will
definitely us it now.
Cheers,
Rainer
>
> Cheers -- Eric
>
> Rainer M Krug <r.m.krug@gmail.com> writes:
>
>> Hi
>>
>> when I tangle this document, I get the results in the section below.
>> This is obviously not correct. This worked in an earlier version.
>>
>> Any help appreciated,
>>
>> Rainer
>>
>>
>> * Run script (./../nsa.sh)
>> :PROPERTIES:
>> :tangle: ./nsa.sh
>> :exports: code
>> :END:
>> ** Update and call submit script
>> :PROPERTIES:
>> :ID: 173c527a-b032-4cc5-89d8-a32c3c0c7cae
>> :END:
>> #+BEGIN_SRC sh :var REV=(vc-working-revision (or (buffer-file-name)
>> org-current-export-file)) :var STATE=(vc-state (or (buffer-file-name)
>> org-current-export-file))
>> rm -rf ./R
>> rm -f ./spreadSim.sub
>> REVISION=$REV.$STATE
>> tar -xf nsa.$REVISION.tar.gz
>> $HOME/R/R/R-2.12.0/bin/Rscript --vanilla -e
>> "source('./R/generateLatinHypercubeScenarios.R'); doIt()"
>> for SCENARIO in ./R/scenarios/*.R; do
>> export SCENARIO=${SCENARIO#./R/scenarios/}
>> qsub nsa.sub
>> done
>> #+END_SRC
>>
>> * tangled
>> #+begin_example
>> #!/bin/bash
>> REV=$(cat <<'BABEL_TABLE'
>>
>> BABEL_TABLE
>> )
>> STATE=$(cat <<'BABEL_TABLE'
>>
>> BABEL_TABLE
>> )
>> rm -rf ./R
>> rm -f ./spreadSim.sub
>> REVISION=$REV.$STATE
>> tar -xf nsa.$REVISION.tar.gz
>> $HOME/R/R/R-2.12.0/bin/Rscript --vanilla -e
>> "source('./R/generateLatinHypercubeScenarios.R'); doIt()"
>> for SCENARIO in ./R/scenarios/*.R; do
>> export SCENARIO=${SCENARIO#./R/scenarios/}
>> qsub nsa.sub
>> done
>> #+end_example
- --
Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation
Biology, UCT), Dipl. Phys. (Germany)
Centre of Excellence for Invasion Biology
Natural Sciences Building
Office Suite 2039
Stellenbosch University
Main Campus, Merriman Avenue
Stellenbosch
South Africa
Tel: +33 - (0)9 53 10 27 44
Cell: +27 - (0)8 39 47 90 42
Fax (SA): +27 - (0)8 65 16 27 82
Fax (D) : +49 - (0)3 21 21 25 22 44
Fax (FR): +33 - (0)9 58 10 27 44
email: Rainer@krugs.de
Skype: RMkrug
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAk2UJOQACgkQoYgNqgF2egqJoACdHYVLbcjry1IPk13AhG7zIrKX
khkAnA0UVYgHnAsDDVSwTpdMKcECcrm3
=iPKh
-----END PGP SIGNATURE-----
next prev parent reply other threads:[~2011-03-31 6:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-30 12:12 [BABEL][BUG] Tangle incorrect with variables Rainer M Krug
2011-03-30 20:17 ` Eric Schulte
2011-03-31 6:53 ` Rainer M Krug [this message]
2011-03-31 16:00 ` Sébastien Vauban
2011-04-01 16:07 ` Rainer M Krug
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4D9424E4.1090003@gmail.com \
--to=r.m.krug@gmail.com \
--cc=emacs-orgmode@gnu.org \
--cc=schulte.eric@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).