* add a list item and automatically insert an incative timestamp without being asked to confirm "now"
@ 2009-03-25 13:30 Rainer Stengele
2009-03-26 10:40 ` Carsten Dominik
0 siblings, 1 reply; 5+ messages in thread
From: Rainer Stengele @ 2009-03-25 13:30 UTC (permalink / raw)
To: emacs-orgmode
Hi all,
I want to write a function to create a new item in an item list and immediately
insert an inactive timestamp. How could I possibly do this?
I can write a keyboard macro, yes.
But can somebody show me how to write a function which I can global-set-key to?
Must be something like
...
(org-meta-return)
(org-time-stamp-inactive t)
...
Problem is I then get asked to confirm the current timestamp. In this case I
always want to use the current timestamp without being asked.
Thanks,
Rainer
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: add a list item and automatically insert an incative timestamp without being asked to confirm "now"
2009-03-25 13:30 add a list item and automatically insert an incative timestamp without being asked to confirm "now" Rainer Stengele
@ 2009-03-26 10:40 ` Carsten Dominik
2009-03-26 15:18 ` Rainer Stengele
0 siblings, 1 reply; 5+ messages in thread
From: Carsten Dominik @ 2009-03-26 10:40 UTC (permalink / raw)
To: Rainer Stengele; +Cc: emacs-orgmode
On Mar 25, 2009, at 2:30 PM, Rainer Stengele wrote:
> Hi all,
>
> I want to write a function to create a new item in an item list and
> immediately
> insert an inactive timestamp. How could I possibly do this?
> I can write a keyboard macro, yes.
> But can somebody show me how to write a function which I can global-
> set-key to?
>
>
> Must be something like
> ...
> (org-meta-return)
> (org-time-stamp-inactive t)
> ...
>
>
> Problem is I then get asked to confirm the current timestamp. In
> this case I
> always want to use the current timestamp without being asked.
>
(defun xxx ()
(interactive)
(org-insert-item)
(org-insert-time-stamp (current-time) 'with-hm 'inactive))
This assumes that you are in a plain list already. Funnily
enough, there is no command to insert an item at any location, except
pressing
- SPC
of course :-)
So you could do
(defun xxx ()
(interactive)
(if (not (org-in-item-p))
(insert "- ")
(org-insert-item))
(org-insert-time-stamp (current-time) 'with-hm 'inactive))
HTH
- Carsten
- Carsten
> Thanks,
>
> Rainer
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: add a list item and automatically insert an incative timestamp without being asked to confirm "now"
2009-03-26 10:40 ` Carsten Dominik
@ 2009-03-26 15:18 ` Rainer Stengele
2009-03-26 16:01 ` Rainer Stengele
0 siblings, 1 reply; 5+ messages in thread
From: Rainer Stengele @ 2009-03-26 15:18 UTC (permalink / raw)
To: Carsten Dominik; +Cc: emacs-orgmode
Carsten Dominik schrieb:
>
> On Mar 25, 2009, at 2:30 PM, Rainer Stengele wrote:
>
>> Hi all,
>>
>> I want to write a function to create a new item in an item list and
>> immediately
>> insert an inactive timestamp. How could I possibly do this?
>> I can write a keyboard macro, yes.
>> But can somebody show me how to write a function which I can
>> global-set-key to?
>>
>>
>> Must be something like
>> ...
>> (org-meta-return)
>> (org-time-stamp-inactive t)
>> ...
>>
>>
>> Problem is I then get asked to confirm the current timestamp. In this
>> case I
>> always want to use the current timestamp without being asked.
>>
>
> (defun xxx ()
> (interactive)
> (org-insert-item)
> (org-insert-time-stamp (current-time) 'with-hm 'inactive))
>
> This assumes that you are in a plain list already. Funnily
> enough, there is no command to insert an item at any location, except
> pressing
>
> - SPC
>
> of course :-)
>
> So you could do
>
>
> (defun xxx ()
> (interactive)
> (if (not (org-in-item-p))
> (insert "- ")
> (org-insert-item))
> (org-insert-time-stamp (current-time) 'with-hm 'inactive))
>
>
>
> HTH
>
> - Carsten
>
>
> - Carsten
>
Hi Carsten,
thanks a lot!
Why didn't I find that myself?
I simply tried C-h k C-c ! and found (org-time-stamp-inactive &optional arg).
If I only had found a hint to
(org-insert-time-stamp time &optional with-hm inactive pre post extra)
...
Thanks again!
Rainer
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: add a list item and automatically insert an incative timestamp without being asked to confirm "now"
2009-03-26 15:18 ` Rainer Stengele
@ 2009-03-26 16:01 ` Rainer Stengele
2009-03-26 16:11 ` Carsten Dominik
0 siblings, 1 reply; 5+ messages in thread
From: Rainer Stengele @ 2009-03-26 16:01 UTC (permalink / raw)
Cc: emacs-orgmode
Carsten,
I tried to find the function where one can take notes with a relative timer with
M-<RET>. I gave up ...
I would like to try to add the functionality of adding an item with an inactive
timestamp with M-<RET> (add the item with timestamp if a timestamp occurs in the
previous item).
Where can I start to search?
Rainer
Rainer Stengele schrieb:
> Carsten Dominik schrieb:
>> On Mar 25, 2009, at 2:30 PM, Rainer Stengele wrote:
>>
>>> Hi all,
>>>
>>> I want to write a function to create a new item in an item list and
>>> immediately
>>> insert an inactive timestamp. How could I possibly do this?
>>> I can write a keyboard macro, yes.
>>> But can somebody show me how to write a function which I can
>>> global-set-key to?
>>>
>>>
>>> Must be something like
>>> ...
>>> (org-meta-return)
>>> (org-time-stamp-inactive t)
>>> ...
>>>
>>>
>>> Problem is I then get asked to confirm the current timestamp. In this
>>> case I
>>> always want to use the current timestamp without being asked.
>>>
>> (defun xxx ()
>> (interactive)
>> (org-insert-item)
>> (org-insert-time-stamp (current-time) 'with-hm 'inactive))
>>
>> This assumes that you are in a plain list already. Funnily
>> enough, there is no command to insert an item at any location, except
>> pressing
>>
>> - SPC
>>
>> of course :-)
>>
>> So you could do
>>
>>
>> (defun xxx ()
>> (interactive)
>> (if (not (org-in-item-p))
>> (insert "- ")
>> (org-insert-item))
>> (org-insert-time-stamp (current-time) 'with-hm 'inactive))
>>
>>
>>
>> HTH
>>
>> - Carsten
>>
>>
>> - Carsten
>>
>
>
>
> Hi Carsten,
>
> thanks a lot!
> Why didn't I find that myself?
> I simply tried C-h k C-c ! and found (org-time-stamp-inactive &optional arg).
> If I only had found a hint to
> (org-insert-time-stamp time &optional with-hm inactive pre post extra)
> ...
>
>
> Thanks again!
>
> Rainer
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: add a list item and automatically insert an incative timestamp without being asked to confirm "now"
2009-03-26 16:01 ` Rainer Stengele
@ 2009-03-26 16:11 ` Carsten Dominik
0 siblings, 0 replies; 5+ messages in thread
From: Carsten Dominik @ 2009-03-26 16:11 UTC (permalink / raw)
To: Rainer Stengele; +Cc: emacs-orgmode
org-timer.el
- Carsten
On Mar 26, 2009, at 5:01 PM, Rainer Stengele wrote:
> Carsten,
>
> I tried to find the function where one can take notes with a
> relative timer with
> M-<RET>. I gave up ...
> I would like to try to add the functionality of adding an item with
> an inactive
> timestamp with M-<RET> (add the item with timestamp if a timestamp
> occurs in the
> previous item).
> Where can I start to search?
>
> Rainer
>
>
> Rainer Stengele schrieb:
>> Carsten Dominik schrieb:
>>> On Mar 25, 2009, at 2:30 PM, Rainer Stengele wrote:
>>>
>>>> Hi all,
>>>>
>>>> I want to write a function to create a new item in an item list and
>>>> immediately
>>>> insert an inactive timestamp. How could I possibly do this?
>>>> I can write a keyboard macro, yes.
>>>> But can somebody show me how to write a function which I can
>>>> global-set-key to?
>>>>
>>>>
>>>> Must be something like
>>>> ...
>>>> (org-meta-return)
>>>> (org-time-stamp-inactive t)
>>>> ...
>>>>
>>>>
>>>> Problem is I then get asked to confirm the current timestamp. In
>>>> this
>>>> case I
>>>> always want to use the current timestamp without being asked.
>>>>
>>> (defun xxx ()
>>> (interactive)
>>> (org-insert-item)
>>> (org-insert-time-stamp (current-time) 'with-hm 'inactive))
>>>
>>> This assumes that you are in a plain list already. Funnily
>>> enough, there is no command to insert an item at any location,
>>> except
>>> pressing
>>>
>>> - SPC
>>>
>>> of course :-)
>>>
>>> So you could do
>>>
>>>
>>> (defun xxx ()
>>> (interactive)
>>> (if (not (org-in-item-p))
>>> (insert "- ")
>>> (org-insert-item))
>>> (org-insert-time-stamp (current-time) 'with-hm 'inactive))
>>>
>>>
>>>
>>> HTH
>>>
>>> - Carsten
>>>
>>>
>>> - Carsten
>>>
>>
>>
>>
>> Hi Carsten,
>>
>> thanks a lot!
>> Why didn't I find that myself?
>> I simply tried C-h k C-c ! and found (org-time-stamp-inactive
>> &optional arg).
>> If I only had found a hint to
>> (org-insert-time-stamp time &optional with-hm inactive pre post
>> extra)
>> ...
>>
>>
>> Thanks again!
>>
>> Rainer
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2009-03-26 16:11 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2009-03-25 13:30 add a list item and automatically insert an incative timestamp without being asked to confirm "now" Rainer Stengele
2009-03-26 10:40 ` Carsten Dominik
2009-03-26 15:18 ` Rainer Stengele
2009-03-26 16:01 ` Rainer Stengele
2009-03-26 16:11 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).