* Manual does not list :results output graphics as babel header arg @ 2012-07-09 21:08 John Hendy 2012-07-10 0:35 ` Thomas S. Dye 0 siblings, 1 reply; 7+ messages in thread From: John Hendy @ 2012-07-09 21:08 UTC (permalink / raw) To: emacs-orgmode I have typically outputted graphics from R via tikzDevice manually, but gave my first whirl to just including things via the :file argument in my block header. In the process, I was trying to get this to work and found I needed to use: ----- :results output graphics ----- This is listed on Worg ob-R-doc: - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 But I didn't originally know about it, as it's not a listed header argument in the manual, which is where I check since they're all listed in one place: - http://orgmode.org/manual/results.html#results Does the manual only list universal babel header arguments and R is in a subset of ones using =:results output graphics= or should it be there? John ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Manual does not list :results output graphics as babel header arg 2012-07-09 21:08 Manual does not list :results output graphics as babel header arg John Hendy @ 2012-07-10 0:35 ` Thomas S. Dye 2012-07-10 4:13 ` John Hendy 0 siblings, 1 reply; 7+ messages in thread From: Thomas S. Dye @ 2012-07-10 0:35 UTC (permalink / raw) To: John Hendy; +Cc: emacs-orgmode John Hendy <jw.hendy@gmail.com> writes: > I have typically outputted graphics from R via tikzDevice manually, > but gave my first whirl to just including things via the :file > argument in my block header. In the process, I was trying to get this > to work and found I needed to use: > > ----- > :results output graphics > ----- > > This is listed on Worg ob-R-doc: > - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 > > But I didn't originally know about it, as it's not a listed header > argument in the manual, which is where I check since they're all > listed in one place: > - http://orgmode.org/manual/results.html#results > > Does the manual only list universal babel header arguments and R is in > a subset of ones using =:results output graphics= or should it be > there? > Hi John, The babel header arguments are implemented at two levels. There are general babel arguments that apply to all the supported languages. These are described in the manual. It is also possible for the individual language implementations to define their own header arguments. R is a good example, where the very many arguments to the various R output devices are built into ob-R.el. These language specific header arguments are not described in the manual, but instead appear in the language specific documentation on Worg. Re: your specific question about :results output graphics. I believe this is an R specific header argument and that it is described in the appropriate place in the documentation on Worg (see lines 68 and 230 of ob-R.el). The manual is not a one-stop source for answers to all Babel questions. Recourse to the language specific documentation is typically necessary, which is why it would be great if someone could find time to work up documentation for the 20 or so languages that still lack it :) hth, Tom > > > John > > -- Thomas S. Dye http://www.tsdye.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Manual does not list :results output graphics as babel header arg 2012-07-10 0:35 ` Thomas S. Dye @ 2012-07-10 4:13 ` John Hendy 2012-07-10 15:19 ` Thomas S. Dye 0 siblings, 1 reply; 7+ messages in thread From: John Hendy @ 2012-07-10 4:13 UTC (permalink / raw) To: Thomas S. Dye; +Cc: emacs-orgmode On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote: > John Hendy <jw.hendy@gmail.com> writes: > >> I have typically outputted graphics from R via tikzDevice manually, >> but gave my first whirl to just including things via the :file >> argument in my block header. In the process, I was trying to get this >> to work and found I needed to use: >> >> ----- >> :results output graphics >> ----- >> >> This is listed on Worg ob-R-doc: >> - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 >> >> But I didn't originally know about it, as it's not a listed header >> argument in the manual, which is where I check since they're all >> listed in one place: >> - http://orgmode.org/manual/results.html#results >> >> Does the manual only list universal babel header arguments and R is in >> a subset of ones using =:results output graphics= or should it be >> there? >> > > Hi John, > > The babel header arguments are implemented at two levels. > > There are general babel arguments that apply to all the supported > languages. These are described in the manual. > > It is also possible for the individual language implementations to > define their own header arguments. R is a good example, where the very > many arguments to the various R output devices are built into ob-R.el. > These language specific header arguments are not described in the > manual, but instead appear in the language specific documentation on > Worg. > > Re: your specific question about :results output graphics. I believe > this is an R specific header argument and that it is described in the > appropriate place in the documentation on Worg (see lines 68 and 230 > of ob-R.el). > > The manual is not a one-stop source for answers to all Babel questions. > Recourse to the language specific documentation is typically necessary, > which is why it would be great if someone could find time to work up > documentation for the 20 or so languages that still lack it :) Thanks for the clarification and that answers the question. This was a specific header argument for R. Perhaps the manual could link to this page? - http://orgmode.org/worg/org-contrib/babel/languages.html Maybe with a diddy: "Some languages feature their own unique header arguments. The above document only universal, system wide Babel header arguments and one should consult the specific language page on Worg for additional features." Just a thought. John > > hth, > Tom > >> >> >> John >> >> > > -- > Thomas S. Dye > http://www.tsdye.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Manual does not list :results output graphics as babel header arg 2012-07-10 4:13 ` John Hendy @ 2012-07-10 15:19 ` Thomas S. Dye 2012-07-10 16:03 ` John Hendy 0 siblings, 1 reply; 7+ messages in thread From: Thomas S. Dye @ 2012-07-10 15:19 UTC (permalink / raw) To: John Hendy; +Cc: emacs-orgmode John Hendy <jw.hendy@gmail.com> writes: > On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote: >> John Hendy <jw.hendy@gmail.com> writes: >> >>> I have typically outputted graphics from R via tikzDevice manually, >>> but gave my first whirl to just including things via the :file >>> argument in my block header. In the process, I was trying to get this >>> to work and found I needed to use: >>> >>> ----- >>> :results output graphics >>> ----- >>> >>> This is listed on Worg ob-R-doc: >>> - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 >>> >>> But I didn't originally know about it, as it's not a listed header >>> argument in the manual, which is where I check since they're all >>> listed in one place: >>> - http://orgmode.org/manual/results.html#results >>> >>> Does the manual only list universal babel header arguments and R is in >>> a subset of ones using =:results output graphics= or should it be >>> there? >>> >> >> Hi John, >> >> The babel header arguments are implemented at two levels. >> >> There are general babel arguments that apply to all the supported >> languages. These are described in the manual. >> >> It is also possible for the individual language implementations to >> define their own header arguments. R is a good example, where the very >> many arguments to the various R output devices are built into ob-R.el. >> These language specific header arguments are not described in the >> manual, but instead appear in the language specific documentation on >> Worg. >> >> Re: your specific question about :results output graphics. I believe >> this is an R specific header argument and that it is described in the >> appropriate place in the documentation on Worg (see lines 68 and 230 >> of ob-R.el). >> >> The manual is not a one-stop source for answers to all Babel questions. >> Recourse to the language specific documentation is typically necessary, >> which is why it would be great if someone could find time to work up >> documentation for the 20 or so languages that still lack it :) > > Thanks for the clarification and that answers the question. This was a > specific header argument for R. Perhaps the manual could link to this > page? > - http://orgmode.org/worg/org-contrib/babel/languages.html > > Maybe with a diddy: "Some languages feature their own unique header > arguments. The above document only universal, system wide Babel header > arguments and one should consult the specific language page on Worg > for additional features." > > Just a thought. Hi John, Thanks for this thought, which is indeed reasonable. I thought the manual might lack this structure, but when I went back to the manual I found that http://orgmode.org/manual/Specific-header-arguments.html#Specific-header-arguments has this at the bottom of the page: "Additional header arguments are defined on a language-specific basis, see Languages", where "Languages" is a link to another manual page, one with a table of supported languages and a link to the Worg page you cite. The language is a bit different than your proposal, but the path seems clear enough to me. Of course, there is still the issue of the languages that lack language-specific documentation :) All the best, Tom -- T.S. Dye & Colleagues, Archaeologists 735 Bishop St, Suite 315, Honolulu, HI 96813 Tel: 808-529-0866, Fax: 808-529-0884 http://www.tsdye.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Manual does not list :results output graphics as babel header arg 2012-07-10 15:19 ` Thomas S. Dye @ 2012-07-10 16:03 ` John Hendy 2012-07-10 17:17 ` [PATCH] " Thomas S. Dye 0 siblings, 1 reply; 7+ messages in thread From: John Hendy @ 2012-07-10 16:03 UTC (permalink / raw) To: Thomas S. Dye; +Cc: emacs-orgmode On Tue, Jul 10, 2012 at 10:19 AM, Thomas S. Dye <tsd@tsdye.com> wrote: > John Hendy <jw.hendy@gmail.com> writes: > >> On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote: >>> John Hendy <jw.hendy@gmail.com> writes: >>> >>>> I have typically outputted graphics from R via tikzDevice manually, >>>> but gave my first whirl to just including things via the :file >>>> argument in my block header. In the process, I was trying to get this >>>> to work and found I needed to use: >>>> >>>> ----- >>>> :results output graphics >>>> ----- >>>> >>>> This is listed on Worg ob-R-doc: >>>> - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 >>>> >>>> But I didn't originally know about it, as it's not a listed header >>>> argument in the manual, which is where I check since they're all >>>> listed in one place: >>>> - http://orgmode.org/manual/results.html#results >>>> >>>> Does the manual only list universal babel header arguments and R is in >>>> a subset of ones using =:results output graphics= or should it be >>>> there? >>>> >>> >>> Hi John, >>> >>> The babel header arguments are implemented at two levels. >>> >>> There are general babel arguments that apply to all the supported >>> languages. These are described in the manual. >>> >>> It is also possible for the individual language implementations to >>> define their own header arguments. R is a good example, where the very >>> many arguments to the various R output devices are built into ob-R.el. >>> These language specific header arguments are not described in the >>> manual, but instead appear in the language specific documentation on >>> Worg. >>> >>> Re: your specific question about :results output graphics. I believe >>> this is an R specific header argument and that it is described in the >>> appropriate place in the documentation on Worg (see lines 68 and 230 >>> of ob-R.el). >>> >>> The manual is not a one-stop source for answers to all Babel questions. >>> Recourse to the language specific documentation is typically necessary, >>> which is why it would be great if someone could find time to work up >>> documentation for the 20 or so languages that still lack it :) >> >> Thanks for the clarification and that answers the question. This was a >> specific header argument for R. Perhaps the manual could link to this >> page? >> - http://orgmode.org/worg/org-contrib/babel/languages.html >> >> Maybe with a diddy: "Some languages feature their own unique header >> arguments. The above document only universal, system wide Babel header >> arguments and one should consult the specific language page on Worg >> for additional features." >> >> Just a thought. > > Hi John, > > Thanks for this thought, which is indeed reasonable. I thought the > manual might lack this structure, but when I went back to the > manual I found that > http://orgmode.org/manual/Specific-header-arguments.html#Specific-header-arguments > has this at the bottom of the page: "Additional header arguments are > defined on a language-specific basis, see Languages", where "Languages" > is a link to another manual page, one with a table of supported > languages and a link to the Worg page you cite. > Wow. You see only what you look for. :embarrassed: > The language is a bit different than your proposal, but the path seems > clear enough to me. Technically the path points to http://orgmode.org/worg/org-contrib/babel/languages/; I'd point it to http://orgmode.org/worg/org-contrib/babel/languages.html as it looks cleaner vs. just looking at the directory of .html files. Either way... the manual totally does it's job and I missed it! Thanks for bearing with me! John > > Of course, there is still the issue of the languages that lack > language-specific documentation :) > > All the best, > Tom > > -- > T.S. Dye & Colleagues, Archaeologists > 735 Bishop St, Suite 315, Honolulu, HI 96813 > Tel: 808-529-0866, Fax: 808-529-0884 > http://www.tsdye.com ^ permalink raw reply [flat|nested] 7+ messages in thread
* [PATCH] Re: Manual does not list :results output graphics as babel header arg 2012-07-10 16:03 ` John Hendy @ 2012-07-10 17:17 ` Thomas S. Dye 2012-07-10 19:34 ` [Accepted] " Bastien Guerry 0 siblings, 1 reply; 7+ messages in thread From: Thomas S. Dye @ 2012-07-10 17:17 UTC (permalink / raw) To: John Hendy; +Cc: emacs-orgmode [-- Attachment #1: Type: text/plain, Size: 251 bytes --] Aloha all, The attached patch changes the link to the languages supported by babel from a directory listing to the Worg page that uses a table to link to the language-specific documentation pages. It was suggested by John Hendy. All the best, Tom [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: Patch to org.texi --] [-- Type: text/x-patch, Size: 895 bytes --] From 0438f0ae1e23321dbacd0666119205985959433e Mon Sep 17 00:00:00 2001 From: Thomas Dye <tsd@tsdye.com> Date: Tue, 10 Jul 2012 07:12:13 -1000 Subject: [PATCH] Changed babel languages link following a suggestion by John Hendy --- doc/org.texi | 2 +- 1 files changed, 1 insertions(+), 1 deletions(-) diff --git a/doc/org.texi b/doc/org.texi index 922cbfb..c48242d 100644 --- a/doc/org.texi +++ b/doc/org.texi @@ -12940,7 +12940,7 @@ Code blocks in the following languages are supported. Language-specific documentation is available for some languages. If available, it can be found at -@uref{http://orgmode.org/worg/org-contrib/babel/languages}. +@uref{http://orgmode.org/worg/org-contrib/babel/languages.html}. The @code{org-babel-load-languages} controls which languages are enabled for evaluation (by default only @code{emacs-lisp} is enabled). This variable can -- 1.7.5.4 [-- Attachment #3: Type: text/plain, Size: 4263 bytes --] John Hendy <jw.hendy@gmail.com> writes: > On Tue, Jul 10, 2012 at 10:19 AM, Thomas S. Dye <tsd@tsdye.com> wrote: >> John Hendy <jw.hendy@gmail.com> writes: >> >>> On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote: >>>> John Hendy <jw.hendy@gmail.com> writes: >>>> >>>>> I have typically outputted graphics from R via tikzDevice manually, >>>>> but gave my first whirl to just including things via the :file >>>>> argument in my block header. In the process, I was trying to get this >>>>> to work and found I needed to use: >>>>> >>>>> ----- >>>>> :results output graphics >>>>> ----- >>>>> >>>>> This is listed on Worg ob-R-doc: >>>>> - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 >>>>> >>>>> But I didn't originally know about it, as it's not a listed header >>>>> argument in the manual, which is where I check since they're all >>>>> listed in one place: >>>>> - http://orgmode.org/manual/results.html#results >>>>> >>>>> Does the manual only list universal babel header arguments and R is in >>>>> a subset of ones using =:results output graphics= or should it be >>>>> there? >>>>> >>>> >>>> Hi John, >>>> >>>> The babel header arguments are implemented at two levels. >>>> >>>> There are general babel arguments that apply to all the supported >>>> languages. These are described in the manual. >>>> >>>> It is also possible for the individual language implementations to >>>> define their own header arguments. R is a good example, where the very >>>> many arguments to the various R output devices are built into ob-R.el. >>>> These language specific header arguments are not described in the >>>> manual, but instead appear in the language specific documentation on >>>> Worg. >>>> >>>> Re: your specific question about :results output graphics. I believe >>>> this is an R specific header argument and that it is described in the >>>> appropriate place in the documentation on Worg (see lines 68 and 230 >>>> of ob-R.el). >>>> >>>> The manual is not a one-stop source for answers to all Babel questions. >>>> Recourse to the language specific documentation is typically necessary, >>>> which is why it would be great if someone could find time to work up >>>> documentation for the 20 or so languages that still lack it :) >>> >>> Thanks for the clarification and that answers the question. This was a >>> specific header argument for R. Perhaps the manual could link to this >>> page? >>> - http://orgmode.org/worg/org-contrib/babel/languages.html >>> >>> Maybe with a diddy: "Some languages feature their own unique header >>> arguments. The above document only universal, system wide Babel header >>> arguments and one should consult the specific language page on Worg >>> for additional features." >>> >>> Just a thought. >> >> Hi John, >> >> Thanks for this thought, which is indeed reasonable. I thought the >> manual might lack this structure, but when I went back to the >> manual I found that >> http://orgmode.org/manual/Specific-header-arguments.html#Specific-header-arguments >> has this at the bottom of the page: "Additional header arguments are >> defined on a language-specific basis, see Languages", where "Languages" >> is a link to another manual page, one with a table of supported >> languages and a link to the Worg page you cite. >> > > Wow. You see only what you look for. :embarrassed: > >> The language is a bit different than your proposal, but the path seems >> clear enough to me. > > Technically the path points to > http://orgmode.org/worg/org-contrib/babel/languages/; I'd point it to > http://orgmode.org/worg/org-contrib/babel/languages.html as it looks > cleaner vs. just looking at the directory of .html files. Either > way... the manual totally does it's job and I missed it! > > Thanks for bearing with me! > John > >> >> Of course, there is still the issue of the languages that lack >> language-specific documentation :) >> >> All the best, >> Tom >> >> -- >> T.S. Dye & Colleagues, Archaeologists >> 735 Bishop St, Suite 315, Honolulu, HI 96813 >> Tel: 808-529-0866, Fax: 808-529-0884 >> http://www.tsdye.com -- T.S. Dye & Colleagues, Archaeologists 735 Bishop St, Suite 315, Honolulu, HI 96813 Tel: 808-529-0866, Fax: 808-529-0884 http://www.tsdye.com ^ permalink raw reply related [flat|nested] 7+ messages in thread
* [Accepted] Re: Manual does not list :results output graphics as babel header arg 2012-07-10 17:17 ` [PATCH] " Thomas S. Dye @ 2012-07-10 19:34 ` Bastien Guerry 0 siblings, 0 replies; 7+ messages in thread From: Bastien Guerry @ 2012-07-10 19:34 UTC (permalink / raw) To: emacs-orgmode Patch 1363 (http://patchwork.newartisans.com/patch/1363/) is now "Accepted". Maintainer comment: none This relates to the following submission: http://mid.gmane.org/%3Cm1obnnk036.fsf_-_%40tsdye.com%3E Here is the original message containing the patch: > Content-Type: text/plain; charset="utf-8" > MIME-Version: 1.0 > Content-Transfer-Encoding: 7bit > Subject: [O] Re: Manual does not list :results output graphics as babel header > arg > Date: Tue, 10 Jul 2012 22:17:01 -0000 > From: Thomas S. Dye <tsd@tsdye.com> > X-Patchwork-Id: 1363 > Message-Id: <m1obnnk036.fsf_-_@tsdye.com> > To: John Hendy <jw.hendy@gmail.com> > Cc: emacs-orgmode <emacs-orgmode@gnu.org> > > Aloha all, > > The attached patch changes the link to the languages supported by babel > from a directory listing to the Worg page that uses a table to link to > the language-specific documentation pages. It was suggested by John > Hendy. > > All the best, > Tom > John Hendy <jw.hendy@gmail.com> writes: > > > On Tue, Jul 10, 2012 at 10:19 AM, Thomas S. Dye <tsd@tsdye.com> wrote: > >> John Hendy <jw.hendy@gmail.com> writes: > >> > >>> On Mon, Jul 9, 2012 at 7:35 PM, Thomas S. Dye <tsd@tsdye.com> wrote: > >>>> John Hendy <jw.hendy@gmail.com> writes: > >>>> > >>>>> I have typically outputted graphics from R via tikzDevice manually, > >>>>> but gave my first whirl to just including things via the :file > >>>>> argument in my block header. In the process, I was trying to get this > >>>>> to work and found I needed to use: > >>>>> > >>>>> ----- > >>>>> :results output graphics > >>>>> ----- > >>>>> > >>>>> This is listed on Worg ob-R-doc: > >>>>> - http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-R.html#sec-4-3 > >>>>> > >>>>> But I didn't originally know about it, as it's not a listed header > >>>>> argument in the manual, which is where I check since they're all > >>>>> listed in one place: > >>>>> - http://orgmode.org/manual/results.html#results > >>>>> > >>>>> Does the manual only list universal babel header arguments and R is in > >>>>> a subset of ones using =:results output graphics= or should it be > >>>>> there? > >>>>> > >>>> > >>>> Hi John, > >>>> > >>>> The babel header arguments are implemented at two levels. > >>>> > >>>> There are general babel arguments that apply to all the supported > >>>> languages. These are described in the manual. > >>>> > >>>> It is also possible for the individual language implementations to > >>>> define their own header arguments. R is a good example, where the very > >>>> many arguments to the various R output devices are built into ob-R.el. > >>>> These language specific header arguments are not described in the > >>>> manual, but instead appear in the language specific documentation on > >>>> Worg. > >>>> > >>>> Re: your specific question about :results output graphics. I believe > >>>> this is an R specific header argument and that it is described in the > >>>> appropriate place in the documentation on Worg (see lines 68 and 230 > >>>> of ob-R.el). > >>>> > >>>> The manual is not a one-stop source for answers to all Babel questions. > >>>> Recourse to the language specific documentation is typically necessary, > >>>> which is why it would be great if someone could find time to work up > >>>> documentation for the 20 or so languages that still lack it :) > >>> > >>> Thanks for the clarification and that answers the question. This was a > >>> specific header argument for R. Perhaps the manual could link to this > >>> page? > >>> - http://orgmode.org/worg/org-contrib/babel/languages.html > >>> > >>> Maybe with a diddy: "Some languages feature their own unique header > >>> arguments. The above document only universal, system wide Babel header > >>> arguments and one should consult the specific language page on Worg > >>> for additional features." > >>> > >>> Just a thought. > >> > >> Hi John, > >> > >> Thanks for this thought, which is indeed reasonable. I thought the > >> manual might lack this structure, but when I went back to the > >> manual I found that > >> http://orgmode.org/manual/Specific-header-arguments.html#Specific-header-arguments > >> has this at the bottom of the page: "Additional header arguments are > >> defined on a language-specific basis, see Languages", where "Languages" > >> is a link to another manual page, one with a table of supported > >> languages and a link to the Worg page you cite. > >> > > > > Wow. You see only what you look for. :embarrassed: > > > >> The language is a bit different than your proposal, but the path seems > >> clear enough to me. > > > > Technically the path points to > > http://orgmode.org/worg/org-contrib/babel/languages/; I'd point it to > > http://orgmode.org/worg/org-contrib/babel/languages.html as it looks > > cleaner vs. just looking at the directory of .html files. Either > > way... the manual totally does it's job and I missed it! > > > > Thanks for bearing with me! > > John > > > >> > >> Of course, there is still the issue of the languages that lack > >> language-specific documentation :) > >> > >> All the best, > >> Tom > >> > >> -- > >> T.S. Dye & Colleagues, Archaeologists > >> 735 Bishop St, Suite 315, Honolulu, HI 96813 > >> Tel: 808-529-0866, Fax: 808-529-0884 > >> http://www.tsdye.com > > > >From 0438f0ae1e23321dbacd0666119205985959433e Mon Sep 17 00:00:00 2001 > From: Thomas Dye <tsd@tsdye.com> > Date: Tue, 10 Jul 2012 07:12:13 -1000 > Subject: [PATCH] Changed babel languages link following a suggestion by John > Hendy > > --- > doc/org.texi | 2 +- > 1 files changed, 1 insertions(+), 1 deletions(-) > > diff --git a/doc/org.texi b/doc/org.texi > index 922cbfb..c48242d 100644 > --- a/doc/org.texi > +++ b/doc/org.texi > @@ -12940,7 +12940,7 @@ Code blocks in the following languages are supported. > > Language-specific documentation is available for some languages. If > available, it can be found at > -@uref{http://orgmode.org/worg/org-contrib/babel/languages}. > +@uref{http://orgmode.org/worg/org-contrib/babel/languages.html}. > > The @code{org-babel-load-languages} controls which languages are enabled for > evaluation (by default only @code{emacs-lisp} is enabled). This variable can > -- > 1.7.5.4 > > ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-07-10 19:33 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-07-09 21:08 Manual does not list :results output graphics as babel header arg John Hendy 2012-07-10 0:35 ` Thomas S. Dye 2012-07-10 4:13 ` John Hendy 2012-07-10 15:19 ` Thomas S. Dye 2012-07-10 16:03 ` John Hendy 2012-07-10 17:17 ` [PATCH] " Thomas S. Dye 2012-07-10 19:34 ` [Accepted] " Bastien Guerry
Code repositories for project(s) associated with this public inbox https://git.savannah.gnu.org/cgit/emacs/org-mode.git This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).