emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
From: Matt <matt@excalamus.com>
To: "Ihor Radchenko" <yantar92@posteo.net>
Cc: "Jack Kamm" <jackkamm@tatersworld.org>,
	"emacs-orgmode" <emacs-orgmode@gnu.org>
Subject: Re: [BUG] conda doesn't work in ob-shell sessions
Date: Thu, 25 Jan 2024 20:14:47 +0100	[thread overview]
Message-ID: <18d420bd33e.b270bb881931540.4087190415865625378@excalamus.com> (raw)
In-Reply-To: <87v87ig3i0.fsf@localhost>


 ---- On Wed, 24 Jan 2024 16:20:16 +0100  Ihor Radchenko  wrote --- 
 > Jack Kamm jackkamm@tatersworld.org> writes:
 > 
 > > Ihor Radchenko yantar92@posteo.net> writes:
 > >
 > >> What about the attached patch?
 > >
 > > I applied the patch to main, but the behavior was the same as before.
 > 
 > What about the attached second version of the patch?

I spent way too long trying to test it but I'm not sure I applied the patch correctly.

I did the following, then realized that the patch I applied undid changes (I assume) from a previous patch and so it must have been applied on top of another one.  I then wasted a bunch of time trying to apply various combinations of the four patches I found in the thread.  One of the patches has trailing whitespace yet the various --ignore options of git am didn't seem to ignore it.  I guess I could have looked at the timestamps and used git apply in sequence?

Should make autoloads also be run after applying the patches?

Here's what I was able to do:

In a VM, installed conda as described by their page.  Specifically, my .bashrc was modified to activate the base environment.   Closed terminal, opened it into the base environment, and created a new environment, emacs-test.

Downloaded the latest org-mode by git-clone and did make autoloads.  Added the org-mode git repo's lisp directory to my early-init.el.

Applied patch with

  git apply --cache --ignore-space-changes --ignore-whitespace 2-v2-0001-lisp-ob-comint.el-Introduce-a-fallback-prompt-reg.patch

Doing plain git apply failed.

With the changes in the org-mode index, the base environment activated, I run 'emacs' and confirm I'm using the org-mode git with the patch applied (ob-shell doesn't set org-babel-comint-prompt in ).

Then

(org-babel-do-load-languages 'org-babel-load-languages '((shell . t)))

#+begin_src shell :results output :session *shell*
conda activate emacs-test
#+end_src

It hangs.  C-g and switch to shell buffer shows the following (note, this was typed in and not copy-pasted because VM):

(base) user@debian:~$ PROMPT_COMMAND=;PS1="org_babel_sh_prompt> ";PS2=
org_babel_sh_prompt> conda activate emacs-test
echo 'org_babel_sh_eoe'
(emacs-test) org_babel_sh_prompt> 'org_babel_sh_eoe'
(emacs-test) org_babel_sh_prompt> 


--
Matt Trzcinski
Emacs Org contributor (ob-shell)
Learn more about Org mode at https://orgmode.org
Support Org development at https://liberapay.com/org-mode



  reply	other threads:[~2024-01-25 19:15 UTC|newest]

Thread overview: 72+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-02-06 19:39 [PATCH] Async evaluation in ob-shell Matt
2023-02-07 11:40 ` Ihor Radchenko
2023-02-09  4:33   ` Matt
2023-02-09 11:24     ` Ihor Radchenko
2023-02-10 22:19       ` Matt
2023-02-11 11:44         ` Ihor Radchenko
2023-02-12 19:32           ` Matt
2023-02-15 15:08             ` Ihor Radchenko
2023-02-16  4:02               ` Matt
2023-02-17 10:44                 ` Ihor Radchenko
2023-02-19 23:14                   ` Matt
2023-02-20 11:24                     ` Ihor Radchenko
2023-02-20 17:24                       ` Matt
2023-02-22 10:30                         ` Ihor Radchenko
2023-03-02  1:36                           ` Matt
2023-03-03 14:52                             ` Ihor Radchenko
2023-03-03 17:53                               ` Matt
2023-03-05 12:15                                 ` Ihor Radchenko
2023-03-06  6:45                                   ` Matt
2023-03-07 12:45                                     ` Ihor Radchenko
2023-03-09 17:36                                       ` Matt
2023-03-10  1:52                                         ` Max Nikulin
2023-03-12 16:28                                         ` Jack Kamm
2023-03-18 10:48                                         ` Ihor Radchenko
2023-03-21 20:29                                           ` Matt
2023-03-22 12:12                                             ` Ihor Radchenko
2023-03-23 11:50                                             ` Ihor Radchenko
2023-03-23 19:35                                               ` Matt
2023-03-24  9:13                                                 ` Ihor Radchenko
2023-03-28  2:53                                                   ` Matt
2023-03-28 10:06                                                     ` Ihor Radchenko
2023-04-17 15:31                                                   ` Matt
2023-04-17 18:55                                                     ` Ihor Radchenko
2023-04-17 18:56                                                       ` Matt
2023-04-17 19:05                                                         ` Ihor Radchenko
2023-03-23  3:25       ` [SUGGESTION] ob-shell async result output should not contains shell prompt Christopher M. Miles
2023-03-23  4:21         ` Matt
2023-03-23 11:12           ` Christopher M. Miles
2023-03-23 16:23             ` Matt
2023-03-24 11:20               ` Ihor Radchenko
2023-03-23 16:26             ` Remove "shell" as a supported Babel language within ob-shell.el (was Re: [SUGGESTION] ob-shell async result output should not contains shell prompt) Matt
2023-03-24  1:53               ` Remove "shell" as a supported Babel language within ob-shell.el Christopher M. Miles
2023-03-24 11:38               ` Remove "shell" as a supported Babel language within ob-shell.el (was Re: [SUGGESTION] ob-shell async result output should not contains shell prompt) Ihor Radchenko
2023-03-25  5:47                 ` Samuel Wales
2023-03-25 18:07                   ` Ihor Radchenko
2023-03-28  2:33                 ` Matt
2023-02-11 20:56 ` [PATCH] Async evaluation in ob-shell jackkamm
2023-02-12 19:02   ` Matt
2023-02-13  3:16     ` Jack Kamm
2023-02-13 17:07       ` [BUG] shell sessions started outside of Babel broken Matt
2023-02-15  6:19         ` Jack Kamm
2023-02-16 12:53           ` Ihor Radchenko
2023-02-19 15:04             ` Jack Kamm
2023-02-20 11:22               ` Ihor Radchenko
2023-02-21  5:23                 ` Jack Kamm
2023-02-22 10:38                   ` Ihor Radchenko
2023-03-25 16:55               ` Jack Kamm
2023-03-25 16:59                 ` [PATCH] Fix externally started sessions with ob-python Jack Kamm
2023-02-13 20:11       ` [BUG] conda doesn't work in ob-shell sessions Matt
2023-02-15  6:21         ` Jack Kamm
2024-01-18 11:55           ` Ihor Radchenko
2024-01-21 22:48             ` Jack Kamm
2024-01-22  3:42               ` Jack Kamm
2024-01-22 11:59                 ` Ihor Radchenko
2024-01-23  6:09                   ` Jack Kamm
2024-01-24 15:22                     ` Ihor Radchenko
2024-01-25 19:14                       ` Matt [this message]
2024-01-25 20:36                         ` Ihor Radchenko
2024-01-26  0:42                       ` Jack Kamm
2024-01-27 10:25                         ` Matt
2024-02-09 16:37                           ` Ihor Radchenko
2024-01-23 18:51               ` Suhail Singh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: https://www.orgmode.org/

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=18d420bd33e.b270bb881931540.4087190415865625378@excalamus.com \
    --to=matt@excalamus.com \
    --cc=emacs-orgmode@gnu.org \
    --cc=jackkamm@tatersworld.org \
    --cc=yantar92@posteo.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).