* Unable to Style RESULTS Blocks
@ 2012-05-21 17:36 Jeff Rush
2012-05-21 17:58 ` Thomas S. Dye
0 siblings, 1 reply; 5+ messages in thread
From: Jeff Rush @ 2012-05-21 17:36 UTC (permalink / raw)
To: emacs-orgmode
Using org-babel, I cannot figure out how to make the export of the
results of execution appear in LaTeX as a shaded box, like I see on so
many of the org-mode websites.
#+name: example
#+BEGIN_SRC python -n :results output :exports both
print "Hello World"
#+END_SRC
#+results: example
: Hello World
The results are exported as:
\begin{verbatim}
Hello World
\end{verbatim}
which lacks any shading/borders. The org-mode documentation at:
http://orgmode.org/worg/org-tutorials/org-latex-export.html
shows this example but the example expects the results to be wrapped in
a 'results' environment instead of the 'verbatim' environment I'm seeing.
#+LaTeX_HEADER: \usepackage{framed}
#+LaTeX_HEADER: \usepackage{xcolor}
#+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
#+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
I'm running org-mode 7.8.03 under Linux, and I've defined my own LaTeX
document class to format the other parts of my document. I am new to
LaTeX though. I just expected the formatting of source and results to
be a well-solved problem w/good looking defaults in org-mode.
-Jeff
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Unable to Style RESULTS Blocks
2012-05-21 17:36 Unable to Style RESULTS Blocks Jeff Rush
@ 2012-05-21 17:58 ` Thomas S. Dye
2012-05-21 18:28 ` Mikhail Titov
0 siblings, 1 reply; 5+ messages in thread
From: Thomas S. Dye @ 2012-05-21 17:58 UTC (permalink / raw)
To: Jeff Rush; +Cc: emacs-orgmode
Aloha Jeff,
Jeff Rush <jrush@taupro.com> writes:
> Using org-babel, I cannot figure out how to make the export of the
> results of execution appear in LaTeX as a shaded box, like I see on so
> many of the org-mode websites.
>
> #+name: example
> #+BEGIN_SRC python -n :results output :exports both
> print "Hello World"
> #+END_SRC
>
> #+results: example
> : Hello World
>
> The results are exported as:
>
> \begin{verbatim}
> Hello World
> \end{verbatim}
>
> which lacks any shading/borders. The org-mode documentation at:
>
> http://orgmode.org/worg/org-tutorials/org-latex-export.html
>
> shows this example but the example expects the results to be wrapped in
> a 'results' environment instead of the 'verbatim' environment I'm seeing.
>
> #+LaTeX_HEADER: \usepackage{framed}
> #+LaTeX_HEADER: \usepackage{xcolor}
> #+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
> #+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
>
> I'm running org-mode 7.8.03 under Linux, and I've defined my own LaTeX
> document class to format the other parts of my document. I am new to
> LaTeX though. I just expected the formatting of source and results to
> be a well-solved problem w/good looking defaults in org-mode.
>
> -Jeff
You can wrap a results block any way you like with the :wrap header
argument, e.g.,
#+name: example
#+BEGIN_SRC python -n :results output :exports both :wrap results
print "Hello World"
#+END_SRC
#+RESULTS: example
#+BEGIN_results
Hello World
#+END_results
Or,
#+name: example
#+BEGIN_SRC python -n :results output :exports both :wrap foo
print "Hello World"
#+END_SRC
#+RESULTS: example
#+BEGIN_foo
Hello World
#+END_foo
If you have loaded org-special-blocks, then
#+LaTeX_HEADER: \usepackage{framed}
#+LaTeX_HEADER: \usepackage{xcolor}
#+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
#+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
#+LaTeX_HEADER: \newenvironment{foo}{\begin{framed}}{\end{framed}}
hth,
Tom
--
Thomas S. Dye
http://www.tsdye.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Unable to Style RESULTS Blocks
2012-05-21 17:58 ` Thomas S. Dye
@ 2012-05-21 18:28 ` Mikhail Titov
2012-05-21 21:39 ` Thomas S. Dye
0 siblings, 1 reply; 5+ messages in thread
From: Mikhail Titov @ 2012-05-21 18:28 UTC (permalink / raw)
To: 'Thomas S. Dye', 'Jeff Rush'; +Cc: emacs-orgmode
> -----Original Message-----
> From: emacs-orgmode-bounces+mlt=gmx.us@gnu.org [mailto:emacs-orgmode-
> bounces+mlt=gmx.us@gnu.org] On Behalf Of Thomas S. Dye
> Sent: Monday, May 21, 2012 12:58 PM
> To: Jeff Rush
> Cc: emacs-orgmode@gnu.org
> Subject: Re: [O] Unable to Style RESULTS Blocks
>
> > Using org-babel, I cannot figure out how to make the export of the
> > results of execution appear in LaTeX as a shaded box, like I see on so
> > many of the org-mode websites.
> >
> > #+name: example
> > #+BEGIN_SRC python -n :results output :exports both
> > print "Hello World"
> > #+END_SRC
> >
> > #+results: example
> > : Hello World
> >
> > The results are exported as:
> >
> > \begin{verbatim}
> > Hello World
> > \end{verbatim}
> >
> > which lacks any shading/borders. The org-mode documentation at:
> >
> > http://orgmode.org/worg/org-tutorials/org-latex-export.html
> >
> > shows this example but the example expects the results to be wrapped in
> > a 'results' environment instead of the 'verbatim' environment I'm
seeing.
> >
> > #+LaTeX_HEADER: \usepackage{framed}
> > #+LaTeX_HEADER: \usepackage{xcolor}
> > #+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
> > #+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
> >
> > I'm running org-mode 7.8.03 under Linux, and I've defined my own LaTeX
> > document class to format the other parts of my document. I am new to
> > LaTeX though. I just expected the formatting of source and results to
> > be a well-solved problem w/good looking defaults in org-mode.
> >
> > -Jeff
>
> You can wrap a results block any way you like with the :wrap header
> argument, e.g.,
>
> #+name: example
> #+BEGIN_SRC python -n :results output :exports both :wrap results
> print "Hello World"
> #+END_SRC
>
> #+RESULTS: example
> #+BEGIN_results
> Hello World
> #+END_results
>
> Or,
>
> #+name: example
> #+BEGIN_SRC python -n :results output :exports both :wrap foo
> print "Hello World"
> #+END_SRC
>
> #+RESULTS: example
> #+BEGIN_foo
> Hello World
> #+END_foo
>
> If you have loaded org-special-blocks, then
>
> #+LaTeX_HEADER: \usepackage{framed}
> #+LaTeX_HEADER: \usepackage{xcolor}
> #+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
> #+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
> #+LaTeX_HEADER: \newenvironment{foo}{\begin{framed}}{\end{framed}}
Or even better, use LaTeX package "minted" [1]. Install all the stuff
including pigments and add to you dot emacs the following
(setq org-export-latex-listings 'minted)
[1] http://code.google.com/p/minted/
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Unable to Style RESULTS Blocks
2012-05-21 18:28 ` Mikhail Titov
@ 2012-05-21 21:39 ` Thomas S. Dye
2012-05-21 22:17 ` Mikhail Titov
0 siblings, 1 reply; 5+ messages in thread
From: Thomas S. Dye @ 2012-05-21 21:39 UTC (permalink / raw)
To: Mikhail Titov; +Cc: emacs-orgmode, 'Jeff Rush'
"Mikhail Titov" <mlt@gmx.us> writes:
>> -----Original Message-----
>> From: emacs-orgmode-bounces+mlt=gmx.us@gnu.org [mailto:emacs-orgmode-
>> bounces+mlt=gmx.us@gnu.org] On Behalf Of Thomas S. Dye
>> Sent: Monday, May 21, 2012 12:58 PM
>> To: Jeff Rush
>> Cc: emacs-orgmode@gnu.org
>> Subject: Re: [O] Unable to Style RESULTS Blocks
>>
>> > Using org-babel, I cannot figure out how to make the export of the
>> > results of execution appear in LaTeX as a shaded box, like I see on so
>> > many of the org-mode websites.
>> >
>> > #+name: example
>> > #+BEGIN_SRC python -n :results output :exports both
>> > print "Hello World"
>> > #+END_SRC
>> >
>> > #+results: example
>> > : Hello World
>> >
>> > The results are exported as:
>> >
>> > \begin{verbatim}
>> > Hello World
>> > \end{verbatim}
>> >
>> > which lacks any shading/borders. The org-mode documentation at:
>> >
>> > http://orgmode.org/worg/org-tutorials/org-latex-export.html
>> >
>> > shows this example but the example expects the results to be wrapped in
>> > a 'results' environment instead of the 'verbatim' environment I'm
> seeing.
>> >
>> > #+LaTeX_HEADER: \usepackage{framed}
>> > #+LaTeX_HEADER: \usepackage{xcolor}
>> > #+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
>> > #+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
>> >
>> > I'm running org-mode 7.8.03 under Linux, and I've defined my own LaTeX
>> > document class to format the other parts of my document. I am new to
>> > LaTeX though. I just expected the formatting of source and results to
>> > be a well-solved problem w/good looking defaults in org-mode.
>> >
>> > -Jeff
>>
>> You can wrap a results block any way you like with the :wrap header
>> argument, e.g.,
>>
>> #+name: example
>> #+BEGIN_SRC python -n :results output :exports both :wrap results
>> print "Hello World"
>> #+END_SRC
>>
>> #+RESULTS: example
>> #+BEGIN_results
>> Hello World
>> #+END_results
>>
>> Or,
>>
>> #+name: example
>> #+BEGIN_SRC python -n :results output :exports both :wrap foo
>> print "Hello World"
>> #+END_SRC
>>
>> #+RESULTS: example
>> #+BEGIN_foo
>> Hello World
>> #+END_foo
>>
>> If you have loaded org-special-blocks, then
>>
>> #+LaTeX_HEADER: \usepackage{framed}
>> #+LaTeX_HEADER: \usepackage{xcolor}
>> #+LaTeX_HEADER: \definecolor{shadecolor}{gray}{.95}
>> #+LaTeX_HEADER: \newenvironment{results}{\begin{shaded}}{\end{shaded}}
>> #+LaTeX_HEADER: \newenvironment{foo}{\begin{framed}}{\end{framed}}
>
> Or even better, use LaTeX package "minted" [1]. Install all the stuff
> including pigments and add to you dot emacs the following
>
> (setq org-export-latex-listings 'minted)
>
> [1] http://code.google.com/p/minted/
In my experience, minted marks up exported source code blocks. I
haven't seen it do the same for results blocks, but would be interested
to learn if this is possible and how to make it work.
All the best,
Tom
--
Thomas S. Dye
http://www.tsdye.com
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Unable to Style RESULTS Blocks
2012-05-21 21:39 ` Thomas S. Dye
@ 2012-05-21 22:17 ` Mikhail Titov
0 siblings, 0 replies; 5+ messages in thread
From: Mikhail Titov @ 2012-05-21 22:17 UTC (permalink / raw)
To: 'Thomas S. Dye'; +Cc: emacs-orgmode, 'Jeff Rush'
> -----Original Message-----
> From: emacs-orgmode-bounces+mlt=gmx.us@gnu.org [mailto:emacs-orgmode-
> bounces+mlt=gmx.us@gnu.org] On Behalf Of Thomas S. Dye
> Sent: Monday, May 21, 2012 4:40 PM
> To: Mikhail Titov
> Cc: emacs-orgmode@gnu.org; 'Jeff Rush'
> Subject: Re: [O] Unable to Style RESULTS Blocks
>
> >
> > Or even better, use LaTeX package "minted" [1]. Install all the stuff
> > including pigments and add to you dot emacs the following
> >
> > (setq org-export-latex-listings 'minted)
> >
> > [1] http://code.google.com/p/minted/
>
> In my experience, minted marks up exported source code blocks. I
> haven't seen it do the same for results blocks, but would be interested
> to learn if this is possible and how to make it work.
My apologies. After reading your reply, I've realized that I misread the
question. I thought it was about the background in block source export
result.
M.
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2012-05-21 22:17 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-05-21 17:36 Unable to Style RESULTS Blocks Jeff Rush
2012-05-21 17:58 ` Thomas S. Dye
2012-05-21 18:28 ` Mikhail Titov
2012-05-21 21:39 ` Thomas S. Dye
2012-05-21 22:17 ` Mikhail Titov
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).