emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* What happened to ATTR_ORG?
@ 2019-05-24 15:16 William Denton
  2019-05-24 15:31 ` John Kitchin
  0 siblings, 1 reply; 6+ messages in thread
From: William Denton @ 2019-05-24 15:16 UTC (permalink / raw)
  To: emacs-orgmode

It used to be possible use ATTR_ORG on images to make them display at a 
different size, which was very useful when the images were large.  It worked 
like this:

#+ATTR_ORG: :width 300
[[file:very-large-image.jpg]]

I haven't needed it for a while, but today I went to use it and it's gone!  I 
grepped the source code, ORG-NEWS and the git log, but didn't see any mention of 
it.  What happened?  Did it go in version 9?  Am I overlooking something?  I 
feel like I've stepped into some parallel universe where everything is the same 
except this one Org command.

Bill
--
William Denton :: Toronto, Canada   ---   Listening to Art: https://listeningtoart.org/
https://www.miskatonic.org/         ---   GHG.EARTH: https://ghg.earth/
Caveat lector.                      ---   STAPLR: http://staplr.org/

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: What happened to ATTR_ORG?
  2019-05-24 15:16 What happened to ATTR_ORG? William Denton
@ 2019-05-24 15:31 ` John Kitchin
  2019-05-25  0:54   ` steen
  0 siblings, 1 reply; 6+ messages in thread
From: John Kitchin @ 2019-05-24 15:31 UTC (permalink / raw)
  To: William Denton; +Cc: emacs-orgmode

[-- Attachment #1: Type: text/plain, Size: 1434 bytes --]

I still use this. Do you see any issues in the Messages?

If you try attr_latex does it work? If not you may have an imagemagick
problem that can’t rescale the thumbnail. Note you will have to toggle the
image display after you add that.

On Fri, May 24, 2019 at 11:18 AM William Denton <wtd@pobox.com> wrote:

> It used to be possible use ATTR_ORG on images to make them display at a
> different size, which was very useful when the images were large.  It
> worked
> like this:
>
> #+ATTR_ORG: :width 300
> [[file:very-large-image.jpg]]
>
> I haven't needed it for a while, but today I went to use it and it's
> gone!  I
> grepped the source code, ORG-NEWS and the git log, but didn't see any
> mention of
> it.  What happened?  Did it go in version 9?  Am I overlooking something?
> I
> feel like I've stepped into some parallel universe where everything is the
> same
> except this one Org command.
>
> Bill
> --
> William Denton :: Toronto, Canada   ---   Listening to Art:
> https://listeningtoart.org/
> https://www.miskatonic.org/         ---   GHG.EARTH: https://ghg.earth/
> Caveat lector.                      ---   STAPLR: http://staplr.org/
>
> --
John

-----------------------------------
Professor John Kitchin
Doherty Hall A207F
Department of Chemical Engineering
Carnegie Mellon University
Pittsburgh, PA 15213
412-268-7803
@johnkitchin
http://kitchingroup.cheme.cmu.edu

[-- Attachment #2: Type: text/html, Size: 2351 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: What happened to ATTR_ORG?
  2019-05-24 15:31 ` John Kitchin
@ 2019-05-25  0:54   ` steen
  2019-05-25  4:12     ` Cheong Yiu Fung
  0 siblings, 1 reply; 6+ messages in thread
From: steen @ 2019-05-25  0:54 UTC (permalink / raw)
  To: John Kitchin; +Cc: William Denton, org-mode-email

[-- Attachment #1: Type: text/plain, Size: 1843 bytes --]

I am also having the same issue. I don't have time right now to try to
track down causes, but this is not a unique problem. The behavior I am
seeing is that #+ATTR_ORG no longer causes the images to be resized, they
display at original size.
-- Steen


On Fri, May 24, 2019 at 8:34 AM John Kitchin <jkitchin@andrew.cmu.edu>
wrote:

> I still use this. Do you see any issues in the Messages?
>
> If you try attr_latex does it work? If not you may have an imagemagick
> problem that can’t rescale the thumbnail. Note you will have to toggle the
> image display after you add that.
>
> On Fri, May 24, 2019 at 11:18 AM William Denton <wtd@pobox.com> wrote:
>
>> It used to be possible use ATTR_ORG on images to make them display at a
>> different size, which was very useful when the images were large.  It
>> worked
>> like this:
>>
>> #+ATTR_ORG: :width 300
>> [[file:very-large-image.jpg]]
>>
>> I haven't needed it for a while, but today I went to use it and it's
>> gone!  I
>> grepped the source code, ORG-NEWS and the git log, but didn't see any
>> mention of
>> it.  What happened?  Did it go in version 9?  Am I overlooking
>> something?  I
>> feel like I've stepped into some parallel universe where everything is
>> the same
>> except this one Org command.
>>
>> Bill
>> --
>> William Denton :: Toronto, Canada   ---   Listening to Art:
>> https://listeningtoart.org/
>> https://www.miskatonic.org/         ---   GHG.EARTH: https://ghg.earth/
>> Caveat lector.                      ---   STAPLR: http://staplr.org/
>>
>> --
> John
>
> -----------------------------------
> Professor John Kitchin
> Doherty Hall A207F
> Department of Chemical Engineering
> Carnegie Mellon University
> Pittsburgh, PA 15213
> 412-268-7803
> @johnkitchin
> http://kitchingroup.cheme.cmu.edu
>
>

[-- Attachment #2: Type: text/html, Size: 3108 bytes --]

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: What happened to ATTR_ORG?
  2019-05-25  0:54   ` steen
@ 2019-05-25  4:12     ` Cheong Yiu Fung
  2021-07-13 17:13       ` [O] " William Denton
  0 siblings, 1 reply; 6+ messages in thread
From: Cheong Yiu Fung @ 2019-05-25  4:12 UTC (permalink / raw)
  To: steen, John Kitchin; +Cc: William Denton, org-mode-email

I'm using the latest Org and it's working. If you'd like to dig the
cause you might want to dig in `org-display-inline-images'. It accepts
`:width' in any #+ATTR.*-like option, then immediately call
`create-image'. I would guess it's an imagemagick problem too.

steen <mediapathic@gmail.com> writes:

> I am also having the same issue. I don't have time right now to try to
> track down causes, but this is not a unique problem. The behavior I am
> seeing is that #+ATTR_ORG no longer causes the images to be resized, they
> display at original size.
> -- Steen
>
>
> On Fri, May 24, 2019 at 8:34 AM John Kitchin <jkitchin@andrew.cmu.edu>
> wrote:
>
>> I still use this. Do you see any issues in the Messages?
>>
>> If you try attr_latex does it work? If not you may have an imagemagick
>> problem that can’t rescale the thumbnail. Note you will have to toggle the
>> image display after you add that.
>>
>> On Fri, May 24, 2019 at 11:18 AM William Denton <wtd@pobox.com> wrote:
>>
>>> It used to be possible use ATTR_ORG on images to make them display at a
>>> different size, which was very useful when the images were large.  It
>>> worked
>>> like this:
>>>
>>> #+ATTR_ORG: :width 300
>>> [[file:very-large-image.jpg]]
>>>
>>> I haven't needed it for a while, but today I went to use it and it's
>>> gone!  I
>>> grepped the source code, ORG-NEWS and the git log, but didn't see any
>>> mention of
>>> it.  What happened?  Did it go in version 9?  Am I overlooking
>>> something?  I
>>> feel like I've stepped into some parallel universe where everything is
>>> the same
>>> except this one Org command.
>>>
>>> Bill
>>> --
>>> William Denton :: Toronto, Canada   ---   Listening to Art:
>>> https://listeningtoart.org/
>>> https://www.miskatonic.org/         ---   GHG.EARTH: https://ghg.earth/
>>> Caveat lector.                      ---   STAPLR: http://staplr.org/
>>>
>>> --
>> John
>>
>> -----------------------------------
>> Professor John Kitchin
>> Doherty Hall A207F
>> Department of Chemical Engineering
>> Carnegie Mellon University
>> Pittsburgh, PA 15213
>> 412-268-7803
>> @johnkitchin
>> http://kitchingroup.cheme.cmu.edu
>>
>>

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [O] What happened to ATTR_ORG?
  2019-05-25  4:12     ` Cheong Yiu Fung
@ 2021-07-13 17:13       ` William Denton
  2021-07-13 18:06         ` William Denton
  0 siblings, 1 reply; 6+ messages in thread
From: William Denton @ 2021-07-13 17:13 UTC (permalink / raw)
  To: Cheong Yiu Fung; +Cc: steen, org-mode-email, John Kitchin

[-- Attachment #1: Type: text/plain, Size: 2908 bytes --]

Following up on this two years later ...

I had some images that I wanted to shrink in my Org buffer, but

   #+attr_org:

   (setq org-image-actual-width nil)

I had the variable set to t: "When non-nil, use the actual width of images when 
inlining them."  There are a few other options, but nil does what I want:  "When set to nil, try to get the width from an #+ATTR.* keyword and fall back on the 
original width if none is found."

Bill

On 25 May 2019, Cheong Yiu Fung wrote:

> I'm using the latest Org and it's working. If you'd like to dig the
> cause you might want to dig in `org-display-inline-images'. It accepts
> `:width' in any #+ATTR.*-like option, then immediately call
> `create-image'. I would guess it's an imagemagick problem too.
>
> steen <mediapathic@gmail.com> writes:
>
>> I am also having the same issue. I don't have time right now to try to
>> track down causes, but this is not a unique problem. The behavior I am
>> seeing is that #+ATTR_ORG no longer causes the images to be resized, they
>> display at original size.
>> -- Steen
>>
>>
>> On Fri, May 24, 2019 at 8:34 AM John Kitchin <jkitchin@andrew.cmu.edu>
>> wrote:
>>
>>> I still use this. Do you see any issues in the Messages?
>>>
>>> If you try attr_latex does it work? If not you may have an imagemagick
>>> problem that can’t rescale the thumbnail. Note you will have to toggle the
>>> image display after you add that.
>>>
>>> On Fri, May 24, 2019 at 11:18 AM William Denton <wtd@pobox.com> wrote:
>>>
>>>> It used to be possible use ATTR_ORG on images to make them display at a
>>>> different size, which was very useful when the images were large.  It
>>>> worked
>>>> like this:
>>>>
>>>> #+ATTR_ORG: :width 300
>>>> [[file:very-large-image.jpg]]
>>>>
>>>> I haven't needed it for a while, but today I went to use it and it's
>>>> gone!  I
>>>> grepped the source code, ORG-NEWS and the git log, but didn't see any
>>>> mention of
>>>> it.  What happened?  Did it go in version 9?  Am I overlooking
>>>> something?  I
>>>> feel like I've stepped into some parallel universe where everything is
>>>> the same
>>>> except this one Org command.
>>>>
>>>> Bill
>>>> --
>>>> William Denton :: Toronto, Canada   ---   Listening to Art:
>>>> https://listeningtoart.org/
>>>> https://www.miskatonic.org/         ---   GHG.EARTH: https://ghg.earth/
>>>> Caveat lector.                      ---   STAPLR: http://staplr.org/
>>>>
>>>> --
>>> John
>>>
>>> -----------------------------------
>>> Professor John Kitchin
>>> Doherty Hall A207F
>>> Department of Chemical Engineering
>>> Carnegie Mellon University
>>> Pittsburgh, PA 15213
>>> 412-268-7803
>>> @johnkitchin
>>> http://kitchingroup.cheme.cmu.edu
>>>
>>>
>

--
William Denton
https://www.miskatonic.org/
Librarian, artist and licensed private investigator.
Toronto, Canada

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [O] What happened to ATTR_ORG?
  2021-07-13 17:13       ` [O] " William Denton
@ 2021-07-13 18:06         ` William Denton
  0 siblings, 0 replies; 6+ messages in thread
From: William Denton @ 2021-07-13 18:06 UTC (permalink / raw)
  To: org-mode-email

[-- Attachment #1: Type: text/plain, Size: 3523 bytes --]

Sorry, that escaped too soon.  I meant to say that

   #+attr_org: :width 300

wasn't resizing the images in the Org buffer to 300 pixels wide.  Turned out it 
wasn't Imagemagick, it was the variable org-image-actual-width, which was set to 
ignore any attr_* directives.  I changed that and now it's working.

Bill

On 13 July 2021, William Denton wrote:

> Following up on this two years later ...
>
> I had some images that I wanted to shrink in my Org buffer, but
>
>  #+attr_org:
>
>  (setq org-image-actual-width nil)
>
> I had the variable set to t: "When non-nil, use the actual width of images 
> when inlining them."  There are a few other options, but nil does what I 
> want:  "When set to nil, try to get the width from an #+ATTR.* keyword and 
> fall back on the original width if none is found."
>
> Bill
>
> On 25 May 2019, Cheong Yiu Fung wrote:
>
>> I'm using the latest Org and it's working. If you'd like to dig the
>> cause you might want to dig in `org-display-inline-images'. It accepts
>> `:width' in any #+ATTR.*-like option, then immediately call
>> `create-image'. I would guess it's an imagemagick problem too.
>> 
>> steen <mediapathic@gmail.com> writes:
>> 
>>> I am also having the same issue. I don't have time right now to try to
>>> track down causes, but this is not a unique problem. The behavior I am
>>> seeing is that #+ATTR_ORG no longer causes the images to be resized, they
>>> display at original size.
>>> -- Steen
>>> 
>>> 
>>> On Fri, May 24, 2019 at 8:34 AM John Kitchin <jkitchin@andrew.cmu.edu>
>>> wrote:
>>> 
>>>> I still use this. Do you see any issues in the Messages?
>>>> 
>>>> If you try attr_latex does it work? If not you may have an imagemagick
>>>> problem that can’t rescale the thumbnail. Note you will have to toggle 
>>>> the
>>>> image display after you add that.
>>>> 
>>>> On Fri, May 24, 2019 at 11:18 AM William Denton <wtd@pobox.com> wrote:
>>>> 
>>>>> It used to be possible use ATTR_ORG on images to make them display at a
>>>>> different size, which was very useful when the images were large.  It
>>>>> worked
>>>>> like this:
>>>>> 
>>>>> #+ATTR_ORG: :width 300
>>>>> [[file:very-large-image.jpg]]
>>>>> 
>>>>> I haven't needed it for a while, but today I went to use it and it's
>>>>> gone!  I
>>>>> grepped the source code, ORG-NEWS and the git log, but didn't see any
>>>>> mention of
>>>>> it.  What happened?  Did it go in version 9?  Am I overlooking
>>>>> something?  I
>>>>> feel like I've stepped into some parallel universe where everything is
>>>>> the same
>>>>> except this one Org command.
>>>>> 
>>>>> Bill
>>>>> --
>>>>> William Denton :: Toronto, Canada   ---   Listening to Art:
>>>>> https://listeningtoart.org/
>>>>> https://www.miskatonic.org/         ---   GHG.EARTH: https://ghg.earth/
>>>>> Caveat lector.                      ---   STAPLR: http://staplr.org/
>>>>> 
>>>>> --
>>>> John
>>>> 
>>>> -----------------------------------
>>>> Professor John Kitchin
>>>> Doherty Hall A207F
>>>> Department of Chemical Engineering
>>>> Carnegie Mellon University
>>>> Pittsburgh, PA 15213
>>>> 412-268-7803
>>>> @johnkitchin
>>>> http://kitchingroup.cheme.cmu.edu
>>>> 
>>>> 
>> 
>
> --
> William Denton
> https://www.miskatonic.org/
> Librarian, artist and licensed private investigator.
> Toronto, Canada

--
William Denton
https://www.miskatonic.org/
Librarian, artist and licensed private investigator.
Toronto, Canada

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2021-07-13 18:09 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2019-05-24 15:16 What happened to ATTR_ORG? William Denton
2019-05-24 15:31 ` John Kitchin
2019-05-25  0:54   ` steen
2019-05-25  4:12     ` Cheong Yiu Fung
2021-07-13 17:13       ` [O] " William Denton
2021-07-13 18:06         ` William Denton

Code repositories for project(s) associated with this public inbox

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).