emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
From: Ramesh Nedunchezian <rameshnedunchezian@outlook.com>
To: emacs-orgmode@gnu.org
Subject: Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)]
Date: Sun, 4 Apr 2021 09:56:13 +0530	[thread overview]
Message-ID: <TY2PR0101MB36937D0D27887FE63C74E239DA789@TY2PR0101MB3693.apcprd01.prod.exchangelabs.com> (raw)
In-Reply-To: <87r1jrp2py.fsf@nicolasgoaziou.fr>



On 04/04/21 1:20 am, Nicolas Goaziou wrote:
> Ramesh Nedunchezian <rameshnedunchezian@outlook.com> writes:
> 
>> The advantage is you move to an error, fix it, then M-g M-n, fix it
>> and so on and so forth.
> 
> But all reports are not errors. You may not want to fix them all either.
> OTOH, you lose the ability to hide or ignore unwanted reports, or sort
> them by trust level. 

If you are using `compilation-minor-mode'--yes, the minor mode and not
the major mode--you can have goodness of /both/ tabulated list mode
and compilation mode.

Here is an attempt.

    (require 'compile)

    (add-to-list 'compilation-error-regexp-alist 'org-lint)

    (add-to-list 'compilation-error-regexp-alist-alist
		 (list 'org-lint "^[[:blank:]]+\\([[:digit:]]+\\)[[:blank:]]+\\(high\\|low\\)[[:blank:]]+\\(.+\\)$"
		       (lambda nil
			 (buffer-file-name org-lint--source-buffer))
		       1 nil nil 1))

    (add-hook 'org-lint--report-mode-hook
	      (defun turn-on-compilation-minor-mode ()
		(compilation-minor-mode 1)))


If you mix `compilation-minor-mode' and `tabulated-list-mode', then
you may have to revise the key bindings so that they don't run in to
each other.


1. C-x C-f myfile.org.  (See below)

2. M-x org-lint

3. Goto `Warnings' column and press 'S'.  Satisfy yourself that
   tabulated list commands are still available.  Note that the line
   numbers are in "arbitrary"  order.

4. Go to a random line.  Press RET.  Press M-g M-n (or M-g M-p)
   couple of times.  Satisfy yourself that the order of traversal is
   controlled by the cursor's position in the report buffer.

   Seek a random position in org buffer.  Say, bob or eob.  Press M-g
   M-n (or M-g M-p) couple of times.  Satisfy yourself that the order
   of traversal is controlled by the cursor's position in the report
   buffer.


Contents of myfile.org: (Note that I have replicated the first tree
 many more times to get a large number of errors)

  * Getting the source

  - Start with source that is cloned directly from Savannah[fn:1].
    Using a clone of a clone does not work.

    If you are a member of Emacs Project use,  

    #+begin_src
	  git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
    #+end_src

    If you are not a member use,

    #+begin_src shell
	  git clone https://git.savannah.gnu.org/git/emacs/elpa.git
    #+end_src


  - You must then do some setup:

    #+begin_src
	   make setup
    #+end_src

    That leaves the =packages= directory empty; you must check out the
    ones you want.

  * Getting the source

  - Start with source that is cloned directly from Savannah[fn:1].
    Using a clone of a clone does not work.

    If you are a member of Emacs Project use,  

    #+begin_src
	  git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
    #+end_src

    If you are not a member use,

    #+begin_src shell
	  git clone https://git.savannah.gnu.org/git/emacs/elpa.git
    #+end_src


  - You must then do some setup:

    #+begin_src
	   make setup
    #+end_src

    That leaves the =packages= directory empty; you must check out the
    ones you want.



  * Getting the source

  - Start with source that is cloned directly from Savannah[fn:1].
    Using a clone of a clone does not work.

    If you are a member of Emacs Project use,  

    #+begin_src
	  git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
    #+end_src

    If you are not a member use,

    #+begin_src shell
	  git clone https://git.savannah.gnu.org/git/emacs/elpa.git
    #+end_src


  - You must then do some setup:

    #+begin_src
	   make setup
    #+end_src

    That leaves the =packages= directory empty; you must check out the
    ones you want.



  * Getting the source

  - Start with source that is cloned directly from Savannah[fn:1].
    Using a clone of a clone does not work.

    If you are a member of Emacs Project use,  

    #+begin_src
	  git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
    #+end_src

    If you are not a member use,

    #+begin_src shell
	  git clone https://git.savannah.gnu.org/git/emacs/elpa.git
    #+end_src


  - You must then do some setup:

    #+begin_src
	   make setup
    #+end_src

    That leaves the =packages= directory empty; you must check out the
    ones you want.



  * Getting the source

  - Start with source that is cloned directly from Savannah[fn:1].
    Using a clone of a clone does not work.

    If you are a member of Emacs Project use,  

    #+begin_src
	  git clone <membername>@git.savannah.gnu.org:/srv/git/emacs/elpa.git
    #+end_src

    If you are not a member use,

    #+begin_src shell
	  git clone https://git.savannah.gnu.org/git/emacs/elpa.git
    #+end_src


  - You must then do some setup:

    #+begin_src
	   make setup
    #+end_src

    That leaves the =packages= directory empty; you must check out the
    ones you want.
   


  reply	other threads:[~2021-04-04  4:26 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-01  8:17 Ramesh Nedunchezian
2021-04-01 15:16 ` Nicolas Goaziou
2021-04-02  4:09   ` Ramesh Nedunchezian
2021-04-02 14:50     ` Nicolas Goaziou
2021-04-02  4:33 ` Ramesh Nedunchezian
2021-04-02 14:59   ` Nicolas Goaziou
2021-04-03  4:44     ` Ramesh Nedunchezian
2021-04-03  9:26       ` Nicolas Goaziou
2021-04-03 11:41         ` Ramesh Nedunchezian
2021-04-03 14:40         ` Ramesh Nedunchezian
2021-04-03 14:50           ` Ramesh Nedunchezian
2021-04-03 19:50           ` Nicolas Goaziou
2021-04-04  4:26             ` Ramesh Nedunchezian [this message]
2021-04-07 17:59               ` Nicolas Goaziou
2021-04-08 14:00                 ` Ramesh Nedunchezian
2021-04-19  9:30                   ` Nicolas Goaziou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

  List information: https://www.orgmode.org/

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=TY2PR0101MB36937D0D27887FE63C74E239DA789@TY2PR0101MB3693.apcprd01.prod.exchangelabs.com \
    --to=rameshnedunchezian@outlook.com \
    --cc=emacs-orgmode@gnu.org \
    --subject='Re: Bug: Error while exporting o TexInfo. Html export works fine. [9.4.4 (release_9.4.4 @ /usr/local/share/emacs/28.0.50/lisp/org/)]' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Code repositories for project(s) associated with this inbox:

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).