* Re: requesting help debugging tangle on windows
@ 2012-02-15 22:32 Andrew Cheng
0 siblings, 0 replies; 4+ messages in thread
From: Andrew Cheng @ 2012-02-15 22:32 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 251 bytes --]
Reproduced the issue with a clean Emacs 24 on Windows with and without my
.emacs and .emacs.d on the same machine and on a different machine.
Is this message related? Could not read org-id-values from
~\.emacs.d\.org-id-locations. Setting it to nil.
[-- Attachment #2: Type: text/html, Size: 295 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* requesting help debugging tangle on windows
@ 2012-02-14 22:24 Andrew Cheng
2012-02-18 15:16 ` Eric Schulte
0 siblings, 1 reply; 4+ messages in thread
From: Andrew Cheng @ 2012-02-14 22:24 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 4439 bytes --]
Tangle works in my linux environment but doesn't quite work in my windows
environment. Here's my org file. It defines a code snippet named "block"
and then has a tangle section that refers to "block". Tangle results in a
file with two blank lines in my windows environment.
#+name: block
#+begin_src clojure :results silent
(+ 2 3)
#+end_src
#+begin_src clojure :tangle ../src/tmp.clj :results silent :exports none
:noweb yes
<<block>>
#+end_src
But --- If my tangle section has regular code in it instead of referring to
other named <<blocks>> then the resulting file after tangle has the code
you'd expect.
Below is my org setup. The *Messages* buffer doesn't contain any
interesting error messages. What can I do to find out what's going on?
I did evaluate the following snippet to get C-c C-c to properly evaluate a
clojure code block successfully on my machine. It didn't affect the issue
of tangling. Just thought I'd mention it to be thorough. The snippet is
from Eric Schulte. I thought that by deleting my elpa org folder and
starting emacs again I'd get the latest (with his fix) but I discovered
that I still needed to run this snippet to get C-c C-c to work.
Thanks in advance for any help!
(defun org-babel-execute:clojure (body params)
"Execute a block of Clojure code with Babel."
(require 'slime)
(with-temp-buffer
(insert (org-babel-expand-body:clojure body params))
((lambda (result)
(let ((result-params (cdr (assoc :result-params params))))
(if (or (member "scalar" result-params)
(member "verbatim" result-params))
result
(condition-case nil (org-babel-script-escape result)
(error result)))))
(slime-eval
`(swank:eval-and-grab-output
,(buffer-substring-no-properties (point-min) (point-max)))
(cdr (assoc :package params))))))
Emacs : GNU Emacs 24.0.50.1 (i386-mingw-nt5.1.2600)
of 2011-09-03 on SHAN-PC
Package: Org-mode version 7.7
current state:
==============
(setq
org-export-blocks '((src org-babel-exp-src-block nil) (comment
org-export-blocks-format-comment t)
(ditaa org-export-blocks-format-ditaa nil) (dot
org-export-blocks-format-dot nil))
org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
org-babel-execute-safely-maybe)
org-export-preprocess-before-selecting-backend-code-hook
'(org-beamer-select-beamer-code)
org-tab-first-hook '(org-hide-block-toggle-maybe
org-src-native-tab-command-maybe
org-babel-hide-result-toggle-maybe)
org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers
org-cycle-show-empty-lines
org-optimize-window-after-visibility-change)
org-agenda-before-write-hook '(org-agenda-add-entry-text)
org-speed-command-hook '(org-speed-command-default-hook
org-babel-speed-command-hook)
org-babel-pre-tangle-hook '(save-buffer)
org-occur-hook '(org-first-headline-recenter)
org-export-interblocks '((lob org-babel-exp-lob-one-liners) (src
org-babel-exp-inline-src-blocks))
org-metaup-hook '(org-babel-load-in-session-maybe)
org-confirm-elisp-link-function 'yes-or-no-p
org-export-latex-format-toc-function 'org-export-latex-format-toc-default
org-export-preprocess-before-normalizing-links-hook
'(org-remove-file-link-modifiers)
org-clock-out-hook '(org-clock-remove-empty-clock-drawer)
org-export-first-hook '(org-beamer-initialize-open-trackers)
org-mode-hook '(#[nil "\300\301\302\303\304$\207"
[org-add-hook change-major-mode-hook org-show-block-all
append local] 5]
#[nil "\300\301\302\303\304$\207"
[org-add-hook change-major-mode-hook
org-babel-show-result-all append local] 5]
org-babel-result-hide-spec org-babel-hide-all-hashes)
org-from-is-user-regexp nil
org-export-latex-final-hook '(org-beamer-amend-header org-beamer-fix-toc
org-beamer-auto-fragile-frames
org-beamer-place-default-actions-for-lists)
org-export-latex-after-initial-vars-hook '(org-beamer-after-initial-vars)
org-metadown-hook '(org-babel-pop-to-session-maybe)
org-src-mode-hook '(org-src-babel-configure-edit-buffer
org-src-mode-configure-edit-buffer)
org-after-todo-state-change-hook '(org-clock-out-if-current)
org-export-blocks-postblock-hook '(org-exp-res/src-name-cleanup)
org-babel-tangle-lang-exts '(("clojure" . "clj") ("emacs-lisp" . "el"))
org-confirm-shell-link-function 'yes-or-no-p
)
[-- Attachment #2: Type: text/html, Size: 6094 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: requesting help debugging tangle on windows
2012-02-14 22:24 Andrew Cheng
@ 2012-02-18 15:16 ` Eric Schulte
2012-02-20 15:11 ` Andrew Cheng
0 siblings, 1 reply; 4+ messages in thread
From: Eric Schulte @ 2012-02-18 15:16 UTC (permalink / raw)
To: Andrew Cheng; +Cc: emacs-orgmode
Unfortunately I don't have access to a windows machine for testing of
tangle behavior. Before we delve deeper, could you confirm two things.
1. It sounds as though you are not using the latest version of Org-mode
from git. Please upgrade to the latest -- which should also get you
the latest ob-clojure.el so you don't have to evaluate the snippet
posted below. There are instructions for keeping current with org
development at http://orgmode.org/worg/org-faq.html#Keeping-current.
2. Try to reproduce the problem using "emacs -Q" which will launch emacs
without any personal configuration. That way we can see if this
windows issue is someone related to your config, or is general.
Thanks,
Andrew Cheng <achengs@gmail.com> writes:
> Tangle works in my linux environment but doesn't quite work in my windows
> environment. Here's my org file. It defines a code snippet named "block"
> and then has a tangle section that refers to "block". Tangle results in a
> file with two blank lines in my windows environment.
>
> #+name: block
> #+begin_src clojure :results silent
> (+ 2 3)
> #+end_src
>
> #+begin_src clojure :tangle ../src/tmp.clj :results silent :exports none
> :noweb yes
> <<block>>
> #+end_src
>
> But --- If my tangle section has regular code in it instead of referring to
> other named <<blocks>> then the resulting file after tangle has the code
> you'd expect.
>
> Below is my org setup. The *Messages* buffer doesn't contain any
> interesting error messages. What can I do to find out what's going on?
>
> I did evaluate the following snippet to get C-c C-c to properly evaluate a
> clojure code block successfully on my machine. It didn't affect the issue
> of tangling. Just thought I'd mention it to be thorough. The snippet is
> from Eric Schulte. I thought that by deleting my elpa org folder and
> starting emacs again I'd get the latest (with his fix) but I discovered
> that I still needed to run this snippet to get C-c C-c to work.
>
> Thanks in advance for any help!
>
> (defun org-babel-execute:clojure (body params)
> "Execute a block of Clojure code with Babel."
> (require 'slime)
> (with-temp-buffer
> (insert (org-babel-expand-body:clojure body params))
> ((lambda (result)
> (let ((result-params (cdr (assoc :result-params params))))
> (if (or (member "scalar" result-params)
> (member "verbatim" result-params))
> result
> (condition-case nil (org-babel-script-escape result)
> (error result)))))
> (slime-eval
> `(swank:eval-and-grab-output
> ,(buffer-substring-no-properties (point-min) (point-max)))
> (cdr (assoc :package params))))))
>
> Emacs : GNU Emacs 24.0.50.1 (i386-mingw-nt5.1.2600)
> of 2011-09-03 on SHAN-PC
> Package: Org-mode version 7.7
>
> current state:
> ==============
> (setq
> org-export-blocks '((src org-babel-exp-src-block nil) (comment
> org-export-blocks-format-comment t)
> (ditaa org-export-blocks-format-ditaa nil) (dot
> org-export-blocks-format-dot nil))
> org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
> org-babel-execute-safely-maybe)
> org-export-preprocess-before-selecting-backend-code-hook
> '(org-beamer-select-beamer-code)
> org-tab-first-hook '(org-hide-block-toggle-maybe
> org-src-native-tab-command-maybe
> org-babel-hide-result-toggle-maybe)
> org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers
> org-cycle-show-empty-lines
> org-optimize-window-after-visibility-change)
> org-agenda-before-write-hook '(org-agenda-add-entry-text)
> org-speed-command-hook '(org-speed-command-default-hook
> org-babel-speed-command-hook)
> org-babel-pre-tangle-hook '(save-buffer)
> org-occur-hook '(org-first-headline-recenter)
> org-export-interblocks '((lob org-babel-exp-lob-one-liners) (src
> org-babel-exp-inline-src-blocks))
> org-metaup-hook '(org-babel-load-in-session-maybe)
> org-confirm-elisp-link-function 'yes-or-no-p
> org-export-latex-format-toc-function 'org-export-latex-format-toc-default
> org-export-preprocess-before-normalizing-links-hook
> '(org-remove-file-link-modifiers)
> org-clock-out-hook '(org-clock-remove-empty-clock-drawer)
> org-export-first-hook '(org-beamer-initialize-open-trackers)
> org-mode-hook '(#[nil "\300\301\302\303\304$\207"
> [org-add-hook change-major-mode-hook org-show-block-all
> append local] 5]
> #[nil "\300\301\302\303\304$\207"
> [org-add-hook change-major-mode-hook
> org-babel-show-result-all append local] 5]
> org-babel-result-hide-spec org-babel-hide-all-hashes)
> org-from-is-user-regexp nil
> org-export-latex-final-hook '(org-beamer-amend-header org-beamer-fix-toc
> org-beamer-auto-fragile-frames
> org-beamer-place-default-actions-for-lists)
> org-export-latex-after-initial-vars-hook '(org-beamer-after-initial-vars)
> org-metadown-hook '(org-babel-pop-to-session-maybe)
> org-src-mode-hook '(org-src-babel-configure-edit-buffer
> org-src-mode-configure-edit-buffer)
> org-after-todo-state-change-hook '(org-clock-out-if-current)
> org-export-blocks-postblock-hook '(org-exp-res/src-name-cleanup)
> org-babel-tangle-lang-exts '(("clojure" . "clj") ("emacs-lisp" . "el"))
> org-confirm-shell-link-function 'yes-or-no-p
> )
--
Eric Schulte
http://cs.unm.edu/~eschulte/
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: requesting help debugging tangle on windows
2012-02-18 15:16 ` Eric Schulte
@ 2012-02-20 15:11 ` Andrew Cheng
0 siblings, 0 replies; 4+ messages in thread
From: Andrew Cheng @ 2012-02-20 15:11 UTC (permalink / raw)
To: Eric Schulte; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 5845 bytes --]
#1 worked. My assumption about how I could get the latest org was wrong.
Thanks very much for the help!
On Sat, Feb 18, 2012 at 10:16 AM, Eric Schulte <eric.schulte@gmx.com> wrote:
> Unfortunately I don't have access to a windows machine for testing of
> tangle behavior. Before we delve deeper, could you confirm two things.
>
> 1. It sounds as though you are not using the latest version of Org-mode
> from git. Please upgrade to the latest -- which should also get you
> the latest ob-clojure.el so you don't have to evaluate the snippet
> posted below. There are instructions for keeping current with org
> development at http://orgmode.org/worg/org-faq.html#Keeping-current.
>
> 2. Try to reproduce the problem using "emacs -Q" which will launch emacs
> without any personal configuration. That way we can see if this
> windows issue is someone related to your config, or is general.
>
> Thanks,
>
> Andrew Cheng <achengs@gmail.com> writes:
>
> > Tangle works in my linux environment but doesn't quite work in my windows
> > environment. Here's my org file. It defines a code snippet named "block"
> > and then has a tangle section that refers to "block". Tangle results in a
> > file with two blank lines in my windows environment.
> >
> > #+name: block
> > #+begin_src clojure :results silent
> > (+ 2 3)
> > #+end_src
> >
> > #+begin_src clojure :tangle ../src/tmp.clj :results silent :exports none
> > :noweb yes
> > <<block>>
> > #+end_src
> >
> > But --- If my tangle section has regular code in it instead of referring
> to
> > other named <<blocks>> then the resulting file after tangle has the code
> > you'd expect.
> >
> > Below is my org setup. The *Messages* buffer doesn't contain any
> > interesting error messages. What can I do to find out what's going on?
> >
> > I did evaluate the following snippet to get C-c C-c to properly evaluate
> a
> > clojure code block successfully on my machine. It didn't affect the issue
> > of tangling. Just thought I'd mention it to be thorough. The snippet is
> > from Eric Schulte. I thought that by deleting my elpa org folder and
> > starting emacs again I'd get the latest (with his fix) but I discovered
> > that I still needed to run this snippet to get C-c C-c to work.
> >
> > Thanks in advance for any help!
> >
> > (defun org-babel-execute:clojure (body params)
> > "Execute a block of Clojure code with Babel."
> > (require 'slime)
> > (with-temp-buffer
> > (insert (org-babel-expand-body:clojure body params))
> > ((lambda (result)
> > (let ((result-params (cdr (assoc :result-params params))))
> > (if (or (member "scalar" result-params)
> > (member "verbatim" result-params))
> > result
> > (condition-case nil (org-babel-script-escape result)
> > (error result)))))
> > (slime-eval
> > `(swank:eval-and-grab-output
> > ,(buffer-substring-no-properties (point-min) (point-max)))
> > (cdr (assoc :package params))))))
> >
> > Emacs : GNU Emacs 24.0.50.1 (i386-mingw-nt5.1.2600)
> > of 2011-09-03 on SHAN-PC
> > Package: Org-mode version 7.7
> >
> > current state:
> > ==============
> > (setq
> > org-export-blocks '((src org-babel-exp-src-block nil) (comment
> > org-export-blocks-format-comment t)
> > (ditaa org-export-blocks-format-ditaa nil) (dot
> > org-export-blocks-format-dot nil))
> > org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
> > org-babel-execute-safely-maybe)
> > org-export-preprocess-before-selecting-backend-code-hook
> > '(org-beamer-select-beamer-code)
> > org-tab-first-hook '(org-hide-block-toggle-maybe
> > org-src-native-tab-command-maybe
> > org-babel-hide-result-toggle-maybe)
> > org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers
> > org-cycle-show-empty-lines
> > org-optimize-window-after-visibility-change)
> > org-agenda-before-write-hook '(org-agenda-add-entry-text)
> > org-speed-command-hook '(org-speed-command-default-hook
> > org-babel-speed-command-hook)
> > org-babel-pre-tangle-hook '(save-buffer)
> > org-occur-hook '(org-first-headline-recenter)
> > org-export-interblocks '((lob org-babel-exp-lob-one-liners) (src
> > org-babel-exp-inline-src-blocks))
> > org-metaup-hook '(org-babel-load-in-session-maybe)
> > org-confirm-elisp-link-function 'yes-or-no-p
> > org-export-latex-format-toc-function
> 'org-export-latex-format-toc-default
> > org-export-preprocess-before-normalizing-links-hook
> > '(org-remove-file-link-modifiers)
> > org-clock-out-hook '(org-clock-remove-empty-clock-drawer)
> > org-export-first-hook '(org-beamer-initialize-open-trackers)
> > org-mode-hook '(#[nil "\300\301\302\303\304$\207"
> > [org-add-hook change-major-mode-hook
> org-show-block-all
> > append local] 5]
> > #[nil "\300\301\302\303\304$\207"
> > [org-add-hook change-major-mode-hook
> > org-babel-show-result-all append local] 5]
> > org-babel-result-hide-spec org-babel-hide-all-hashes)
> > org-from-is-user-regexp nil
> > org-export-latex-final-hook '(org-beamer-amend-header org-beamer-fix-toc
> > org-beamer-auto-fragile-frames
> >
> org-beamer-place-default-actions-for-lists)
> > org-export-latex-after-initial-vars-hook
> '(org-beamer-after-initial-vars)
> > org-metadown-hook '(org-babel-pop-to-session-maybe)
> > org-src-mode-hook '(org-src-babel-configure-edit-buffer
> > org-src-mode-configure-edit-buffer)
> > org-after-todo-state-change-hook '(org-clock-out-if-current)
> > org-export-blocks-postblock-hook '(org-exp-res/src-name-cleanup)
> > org-babel-tangle-lang-exts '(("clojure" . "clj") ("emacs-lisp" . "el"))
> > org-confirm-shell-link-function 'yes-or-no-p
> > )
>
> --
> Eric Schulte
> http://cs.unm.edu/~eschulte/
>
[-- Attachment #2: Type: text/html, Size: 7369 bytes --]
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-02-20 15:11 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-02-15 22:32 requesting help debugging tangle on windows Andrew Cheng
-- strict thread matches above, loose matches on Subject: below --
2012-02-14 22:24 Andrew Cheng
2012-02-18 15:16 ` Eric Schulte
2012-02-20 15:11 ` Andrew Cheng
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).