* export-as-hmtl fail
@ 2012-01-24 6:23 aaron barclay
2012-01-24 13:02 ` Martyn Jago
0 siblings, 1 reply; 3+ messages in thread
From: aaron barclay @ 2012-01-24 6:23 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 892 bytes --]
Hello,
When I use a python code block in a document any export-as-html results in
the error "Invalid file-name". Without a code block the export goes without
a hitch. Other exports work no probs such as export-as-ascii. The code
block within the document acts as expected, it is only the export that
fails. I was on org7.5 but updated to 7.8.03 but have the same result.
Also, it is only the python code blocks that fail, others work.
My babel setup is
(org-babel-do-load-languages
'org-babel-load-languages
'( (dot . t)
(sh . t)
(python . t)
(emacs-lisp . t)
))
(setq org-babel-python-command "python2.6")
My code block is
#+begin_src python :results output
print "hi"
#+end_src
#+results:
: hi
Does anyone have any tips on what I might do to troubleshoot this. Could it
be something else in my setup or system? Any else ever experienced this?
cheers,
aaron.
[-- Attachment #2: Type: text/html, Size: 1061 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: export-as-hmtl fail
2012-01-24 6:23 export-as-hmtl fail aaron barclay
@ 2012-01-24 13:02 ` Martyn Jago
2012-01-27 2:34 ` aaron barclay
0 siblings, 1 reply; 3+ messages in thread
From: Martyn Jago @ 2012-01-24 13:02 UTC (permalink / raw)
To: emacs-orgmode
Hi Aaron
aaron barclay <aaron.diplopic@gmail.com> writes:
> Hello,
>
> When I use a python code block in a document any export-as-html results in
> the error "Invalid file-name". Without a code block the export goes without
> a hitch. Other exports work no probs such as export-as-ascii. The code
> block within the document acts as expected, it is only the export that
> fails. I was on org7.5 but updated to 7.8.03 but have the same result.
>
> Also, it is only the python code blocks that fail, others work.
>
> My babel setup is
>
> (org-babel-do-load-languages
> 'org-babel-load-languages
> '( (dot . t)
> (sh . t)
> (python . t)
> (emacs-lisp . t)
> ))
>
> (setq org-babel-python-command "python2.6")
>
> My code block is
>
> #+begin_src python :results output
> print "hi"
>
> #+end_src
>
> #+results:
> : hi
>
> Does anyone have any tips on what I might do to troubleshoot this. Could it
> be something else in my setup or system? Any else ever experienced this?
>
> cheers,
> aaron.
I can't replicate this error (see my versions below). Even breaking
`org-babel-python-command' does not break your code for me in the way
you describe.
For diagnostic purposes, you may run the command:
- `M-x toggle-debug-on-error'
...prior to exporting as html. This should give you a useful backtrace.
Note also that if you are wishing to export the python results as
opposed to the python code, you will also need :exports results since
the default is `:exports code' .
HTH
Best, Martyn
---
Org-mode version 7.8.03 (release_7.8.03.192.ga38b.dirty)
GNU Emacs 24.0.92.1 (x86_64-apple-darwin, NS apple-appkit-1038.36)
of 2011-12-02 on bob.porkrind.org
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: export-as-hmtl fail
2012-01-24 13:02 ` Martyn Jago
@ 2012-01-27 2:34 ` aaron barclay
0 siblings, 0 replies; 3+ messages in thread
From: aaron barclay @ 2012-01-27 2:34 UTC (permalink / raw)
To: Martyn Jago; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 2024 bytes --]
Hi Martyn,
thank you, this helped to track down the problem. Seems to be a conflict
with flymake so have disabled that for now.
aaron.
On 25 January 2012 00:02, Martyn Jago <martyn.jago@btinternet.com> wrote:
> Hi Aaron
>
> aaron barclay <aaron.diplopic@gmail.com> writes:
>
> > Hello,
> >
> > When I use a python code block in a document any export-as-html results
> in
> > the error "Invalid file-name". Without a code block the export goes
> without
> > a hitch. Other exports work no probs such as export-as-ascii. The code
> > block within the document acts as expected, it is only the export that
> > fails. I was on org7.5 but updated to 7.8.03 but have the same result.
> >
> > Also, it is only the python code blocks that fail, others work.
> >
> > My babel setup is
> >
> > (org-babel-do-load-languages
> > 'org-babel-load-languages
> > '( (dot . t)
> > (sh . t)
> > (python . t)
> > (emacs-lisp . t)
> > ))
> >
> > (setq org-babel-python-command "python2.6")
> >
> > My code block is
> >
> > #+begin_src python :results output
> > print "hi"
> >
> > #+end_src
> >
> > #+results:
> > : hi
> >
> > Does anyone have any tips on what I might do to troubleshoot this. Could
> it
> > be something else in my setup or system? Any else ever experienced this?
> >
> > cheers,
> > aaron.
>
> I can't replicate this error (see my versions below). Even breaking
> `org-babel-python-command' does not break your code for me in the way
> you describe.
>
> For diagnostic purposes, you may run the command:
> - `M-x toggle-debug-on-error'
> ...prior to exporting as html. This should give you a useful backtrace.
>
> Note also that if you are wishing to export the python results as
> opposed to the python code, you will also need :exports results since
> the default is `:exports code' .
>
> HTH
>
> Best, Martyn
>
> ---
> Org-mode version 7.8.03 (release_7.8.03.192.ga38b.dirty)
> GNU Emacs 24.0.92.1 (x86_64-apple-darwin, NS apple-appkit-1038.36)
> of 2011-12-02 on bob.porkrind.org
>
>
>
>
>
>
[-- Attachment #2: Type: text/html, Size: 2791 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-01-27 2:34 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-24 6:23 export-as-hmtl fail aaron barclay
2012-01-24 13:02 ` Martyn Jago
2012-01-27 2:34 ` aaron barclay
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).