* org-publish
@ 2008-06-21 1:27 Richard G Riley
2008-06-21 4:31 ` org-publish Manish
0 siblings, 1 reply; 20+ messages in thread
From: Richard G Riley @ 2008-06-21 1:27 UTC (permalink / raw)
To: org-mode
I am trying to use org-publish
I have defined
(setq org-publish-project-alist
'(("RgrBlog"
:base-directory "/home/rgr/.emacs.d/org-files/"
:publishing-directory "~/webs/rgr/public_html/org-publish/"
:section-numbers nil
:author "rgr"
:table-of-contents t
:style "<link rel=stylesheet
href=\"stylesheet.css\"
type=\"text/css\">")))
But when I call org-publish I get nothing. Obviously I have missed
something obvious (the directories are correct) since no files appear at
all.
Any help much appreciated.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-21 1:27 org-publish Richard G Riley
@ 2008-06-21 4:31 ` Manish
[not found] ` <7s4p7nouop.fsf@richardriley.net>
0 siblings, 1 reply; 20+ messages in thread
From: Manish @ 2008-06-21 4:31 UTC (permalink / raw)
To: Richard G Riley; +Cc: org-mode
On Sat, Jun 21, 2008 at 6:57 AM, Richard G Riley wrote:
>
> I am trying to use org-publish
>
> I have defined
>
> (setq org-publish-project-alist
> '(("RgrBlog"
> :base-directory "/home/rgr/.emacs.d/org-files/"
> :publishing-directory "~/webs/rgr/public_html/org-publish/"
> :section-numbers nil
> :author "rgr"
> :table-of-contents t
> :style "<link rel=stylesheet
> href=\"stylesheet.css\"
> type=\"text/css\">")))
>
> But when I call org-publish I get nothing. Obviously I have missed
> something obvious (the directories are correct) since no files appear at
> all.
I have also been trying to make this work and have a similar setup.
Not sure if this will help in your case but try adding:
:publishing-function org-publish-org-to-html
-- Manish
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
[not found] ` <e7cdbe30806210543m361bda09q8357b084531abc67@mail.gmail.com>
@ 2008-06-21 13:05 ` Richard G Riley
2008-06-22 4:27 ` org-publish Nick Dokos
0 siblings, 1 reply; 20+ messages in thread
From: Richard G Riley @ 2008-06-21 13:05 UTC (permalink / raw)
To: Manish; +Cc: org-mode
Manish <mailtomanish.sharma@gmail.com> writes:
> On Sat, Jun 21, 2008 at 5:40 PM, Richard G Riley wrote:
>> Manish writes:
>>
>>> On Sat, Jun 21, 2008 at 6:57 AM, Richard G Riley wrote:
>>> >
>>> > I am trying to use org-publish
>>> >
>>> > I have defined
>>> >
>>> > (setq org-publish-project-alist
>>> > '(("RgrBlog"
>>> > :base-directory "/home/rgr/.emacs.d/org-files/"
>>> > :publishing-directory "~/webs/rgr/public_html/org-publish/"
>>> > :section-numbers nil
>>> > :author "rgr"
>>> > :table-of-contents t
>>> > :style "<link rel=stylesheet
>>> > href=\"stylesheet.css\"
>>> > type=\"text/css\">")))
>>> >
>>> > But when I call org-publish I get nothing. Obviously I have missed
>>> > something obvious (the directories are correct) since no files appear at
>>> > all.
>>>
>>> I have also been trying to make this work and have a similar setup.
>>> Not sure if this will help in your case but try adding:
>>>
>>> :publishing-function org-publish-org-to-html
>>>
>> Did this work for you? It made no difference in my case.
>
> Actually, no. The reason I mentioned it was because it seemed to
> be a required setting. I suspect it's not working for me because
> of some conflicting settings somewhere (been frobbing with my
> setup lately.) I am sorry it didn't work. Sorry for the noise.
>
> -- Manish
Could someone who uses org-publish possibly post their setting for this
variable and possibly a subset (including header) of a published file?
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-21 13:05 ` org-publish Richard G Riley
@ 2008-06-22 4:27 ` Nick Dokos
2008-06-22 14:25 ` org-publish Manish
0 siblings, 1 reply; 20+ messages in thread
From: Nick Dokos @ 2008-06-22 4:27 UTC (permalink / raw)
To: Richard G Riley; +Cc: org-mode
Richard G Riley <rileyrgdev@googlemail.com> wrote:
> >>> Not sure if this will help in your case but try adding:
> >>>
> >>> :publishing-function org-publish-org-to-html
> >>>
> Could someone who uses org-publish possibly post their setting for this
> variable and possibly a subset (including header) of a published file?
>
Richard,
I have a minimal setup that works fine for me. Here is the relevant
section from my org initialization file, which gets loaded from .emacs:
;;; org-publish
(setq org-publish-project-alist
'(("status"
:base-directory "~/lib/status/weekly"
:publishing-directory "/ssh:nick@foo.bar.com:~/public_html/logs"
:publishing-function org-publish-org-to-html
:headline-levels 3
:section-numbers nil
:table-of-contents nil
; :style nil
:auto-preamble t
:auto-postamble nil
)))
(require 'org-publish)
Basically, I jot down status at the end of each day and then publish the
jottings at the end of the week. The org and published files look like
this (this is an edited version of the ones from the week that ended on
June 13):
---------------------------------------------------------------------------
* Status
** [2008-06-09 Mon]
- foo
- bar
- baz
** [2008-06-10 Tue]
- foo
- bar
- baz
** [2008-06-11 Wed]
- foo
- bar
** [2008-06-12 Thu]
- foo
- bar
** [2008-06-13 Fri]
- foo
- bar
- baz
#+TITLE: Status
#+OPTIONS: num:nil toc:nil author:nil timestamp:nil
---------------------------------------------------------------------------
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
lang="en" xml:lang="en">
<head>
<title>Status</title>
<meta http-equiv="Content-Type" content="text/html;charset=iso-8859-1"/>
<meta name="generator" content="Org-mode"/>
<meta name="generated" content="2008/06/16 10:10:33 AM"/>
<meta name="author" content="Nick Dokos"/>
<style type="text/css">
html {
font-family: Times, serif;
font-size: 12pt;
}
.title { text-align: center; }
.todo { color: red; }
.done { color: green; }
.timestamp { color: grey }
.timestamp-kwd { color: CadetBlue }
.tag { background-color:lightblue; font-weight:normal }
.target { }
pre {
border: 1pt solid #AEBDCC;
background-color: #F3F5F7;
padding: 5pt;
font-family: courier, monospace;
font-size: 90%;
}
table { border-collapse: collapse; }
td, th {
vertical-align: top;
<!--border: 1pt solid #ADB9CC;-->
}
dt { font-weight: bold; }
</style>
</head><body>
<h1 class="title">Status</h1>
<div id="outline-container-1" class="outline-2">
<h2 id="sec-1">Status</h2>
<div id="text-1">
</div>
<div id="outline-container-1.1" class="outline-3">
<h3 id="sec-1.1"><span class="timestamp">2008-06-09 Mon</span> </h3>
<div id="text-1.1">
<ul>
<li>
foo
</li>
<li>
bar
</li>
<li>
baz
</li>
</ul>
</div>
</div>
<div id="outline-container-1.2" class="outline-3">
<h3 id="sec-1.2"><span class="timestamp">2008-06-10 Tue</span></h3>
<div id="text-1.2">
<ul>
<li>
foo
</li>
<li>
bar
</li>
<li>
baz
</li>
</ul>
</div>
</div>
<div id="outline-container-1.3" class="outline-3">
<h3 id="sec-1.3"><span class="timestamp">2008-06-11 Wed</span></h3>
<div id="text-1.3">
<ul>
<li>
foo
</li>
<li>
bar
</li>
</ul>
</div>
</div>
<div id="outline-container-1.4" class="outline-3">
<h3 id="sec-1.4"><span class="timestamp">2008-06-12 Thu</span></h3>
<div id="text-1.4">
<ul>
<li>
foo
</li>
<li>
bar
</li>
</ul>
</div>
</div>
<div id="outline-container-1.5" class="outline-3">
<h3 id="sec-1.5"><span class="timestamp">2008-06-13 Fri</span></h3>
<div id="text-1.5">
<ul>
<li>
foo
</li>
<li>
bar
</li>
<li>
baz
</li>
</ul>
</div>
</div>
</div>
</body>
</html>
---------------------------------------------------------------------------
HTH,
Nick
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 4:27 ` org-publish Nick Dokos
@ 2008-06-22 14:25 ` Manish
2008-06-22 15:07 ` org-publish Carsten Dominik
0 siblings, 1 reply; 20+ messages in thread
From: Manish @ 2008-06-22 14:25 UTC (permalink / raw)
To: nicholas.dokos; +Cc: org-mode, Richard G Riley
On Sun, Jun 22, 2008 at 9:57 AM, Nick Dokos wrote:
[snip]
> I have a minimal setup that works fine for me. Here is the relevant
> section from my org initialization file, which gets loaded from .emacs:
>
> ;;; org-publish
> (setq org-publish-project-alist
> '(("status"
> :base-directory "~/lib/status/weekly"
> :publishing-directory "/ssh:nick@foo.bar.com:~/public_html/logs"
> :publishing-function org-publish-org-to-html
> :headline-levels 3
> :section-numbers nil
> :table-of-contents nil
> ; :style nil
> :auto-preamble t
> :auto-postamble nil
> )))
>
> (require 'org-publish)
[example snipped]
I have similar settings but I still do not get any output. Any
ideas what I can check or what other debug information can I
provide?
Any thoughts appreciated.
-- Manish
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 14:25 ` org-publish Manish
@ 2008-06-22 15:07 ` Carsten Dominik
2008-06-22 15:27 ` org-publish Manish
` (2 more replies)
0 siblings, 3 replies; 20+ messages in thread
From: Carsten Dominik @ 2008-06-22 15:07 UTC (permalink / raw)
To: Manish; +Cc: org-mode, Richard G Riley
Have you tried
(setq org-publish-use-timestamps-flag nil)
? Maybe you have not changed the input files for a while, and Org
thinks they have already been published......
- Carsten
On Jun 22, 2008, at 4:25 PM, Manish wrote:
> On Sun, Jun 22, 2008 at 9:57 AM, Nick Dokos wrote:
>
> [snip]
>
>> I have a minimal setup that works fine for me. Here is the relevant
>> section from my org initialization file, which gets loaded
>> from .emacs:
>>
>> ;;; org-publish
>> (setq org-publish-project-alist
>> '(("status"
>> :base-directory "~/lib/status/weekly"
>> :publishing-directory "/ssh:nick@foo.bar.com:~/public_html/
>> logs"
>> :publishing-function org-publish-org-to-html
>> :headline-levels 3
>> :section-numbers nil
>> :table-of-contents nil
>> ; :style nil
>> :auto-preamble t
>> :auto-postamble nil
>> )))
>>
>> (require 'org-publish)
>
> [example snipped]
>
> I have similar settings but I still do not get any output. Any
> ideas what I can check or what other debug information can I
> provide?
>
> Any thoughts appreciated.
>
> -- Manish
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 15:07 ` org-publish Carsten Dominik
@ 2008-06-22 15:27 ` Manish
2008-06-22 20:57 ` org-publish Carsten Dominik
2008-06-23 10:39 ` org-publish Richard G Riley
2008-07-07 14:24 ` org-publish Rick Moynihan
2 siblings, 1 reply; 20+ messages in thread
From: Manish @ 2008-06-22 15:27 UTC (permalink / raw)
To: Carsten Dominik; +Cc: org-mode, Richard G Riley
Nick>>> I have a minimal setup that works fine for me. Here is the relevant
Nick>>> section from my org initialization file, which gets loaded
from .emacs:
Nick>>>
Nick>>> ;;; org-publish
Nick>>> (setq org-publish-project-alist
Nick>>> '(("status"
Nick>>> :base-directory "~/lib/status/weekly"
Nick>>> :publishing-directory "/ssh:nick@foo.bar.com:~/public_html/logs"
Nick>>> :publishing-function org-publish-org-to-html
Nick>>> :headline-levels 3
Nick>>> :section-numbers nil
Nick>>> :table-of-contents nil
Nick>>> ; :style nil
Nick>>> :auto-preamble t
Nick>>> :auto-postamble nil
Nick>>> )))
Nick>>>
Nick>>> (require 'org-publish)
Manish>> I have similar settings but I still do not get any output. Any
Manish>> ideas what I can check or what other debug information can I
Manish>> provide?
Manish>>
Manish>> Any thoughts appreciated.
Carsten> Have you tried
Carsten>
Carsten> (setq org-publish-use-timestamps-flag nil)
Carsten>
Carsten>
Carsten> ? Maybe you have not changed the input files for a while,
and Org thinks
Carsten> they have already been published......
Works perfectly now!
What is curious is that it did not work earlier even when the
files were modified and saved. But now it works not just after
setting this to nil (publish irrespective of modified time) but
publishes correctly with t after the files are modified as it
should (it did not work earlier, I swear.) I will try various
settings to see if I can repeat that state and report if I
succeed.
Thanks again.
Best,
-- Manish
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 15:27 ` org-publish Manish
@ 2008-06-22 20:57 ` Carsten Dominik
2008-06-23 10:41 ` org-publish Richard G Riley
0 siblings, 1 reply; 20+ messages in thread
From: Carsten Dominik @ 2008-06-22 20:57 UTC (permalink / raw)
To: Manish; +Cc: org-mode, Richard G Riley
On Jun 22, 2008, at 5:27 PM, Manish wrote:
> Nick>>> I have a minimal setup that works fine for me. Here is the
> relevant
> Nick>>> section from my org initialization file, which gets loaded
> from .emacs:
> Nick>>>
> Nick>>> ;;; org-publish
> Nick>>> (setq org-publish-project-alist
> Nick>>> '(("status"
> Nick>>> :base-directory "~/lib/status/weekly"
> Nick>>> :publishing-directory "/ssh:nick@foo.bar.com:~/
> public_html/logs"
> Nick>>> :publishing-function org-publish-org-to-html
> Nick>>> :headline-levels 3
> Nick>>> :section-numbers nil
> Nick>>> :table-of-contents nil
> Nick>>> ; :style nil
> Nick>>> :auto-preamble t
> Nick>>> :auto-postamble nil
> Nick>>> )))
> Nick>>>
> Nick>>> (require 'org-publish)
>
> Manish>> I have similar settings but I still do not get any
> output. Any
> Manish>> ideas what I can check or what other debug information can I
> Manish>> provide?
> Manish>>
> Manish>> Any thoughts appreciated.
>
> Carsten> Have you tried
> Carsten>
> Carsten> (setq org-publish-use-timestamps-flag nil)
> Carsten>
> Carsten>
> Carsten> ? Maybe you have not changed the input files for a while,
> and Org thinks
> Carsten> they have already been published......
>
> Works perfectly now!
>
> What is curious is that it did not work earlier even when the
> files were modified and saved. But now it works not just after
> setting this to nil (publish irrespective of modified time) but
> publishes correctly with t after the files are modified as it
> should (it did not work earlier, I swear.)
I guess this means that the tree with the timestamps directory ~/.org-
timestamps
was somehow bad, did contain wrong times or was corrupt in another way.
- Carsten
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 15:07 ` org-publish Carsten Dominik
2008-06-22 15:27 ` org-publish Manish
@ 2008-06-23 10:39 ` Richard G Riley
2008-06-23 16:19 ` org-publish Carsten Dominik
2008-07-07 14:24 ` org-publish Rick Moynihan
2 siblings, 1 reply; 20+ messages in thread
From: Richard G Riley @ 2008-06-23 10:39 UTC (permalink / raw)
To: Carsten Dominik; +Cc: org-mode, Richard G Riley
Carsten Dominik <dominik@science.uva.nl> writes:
> Have you tried
>
> (setq org-publish-use-timestamps-flag nil)
>
>
> ? Maybe you have not changed the input files for a while, and Org
> thinks they have already been published......
That fixed it. I had never published before and my first query of this
variable says it did not exist ...
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 20:57 ` org-publish Carsten Dominik
@ 2008-06-23 10:41 ` Richard G Riley
2008-06-23 14:46 ` org-publish Carsten Dominik
0 siblings, 1 reply; 20+ messages in thread
From: Richard G Riley @ 2008-06-23 10:41 UTC (permalink / raw)
To: Carsten Dominik; +Cc: org-mode, Richard G Riley
Carsten Dominik <dominik@science.uva.nl> writes:
> On Jun 22, 2008, at 5:27 PM, Manish wrote:
>
>> Nick>>> I have a minimal setup that works fine for me. Here is the
>> relevant
>> Nick>>> section from my org initialization file, which gets loaded
>> from .emacs:
>> Nick>>>
>> Nick>>> ;;; org-publish
>> Nick>>> (setq org-publish-project-alist
>> Nick>>> '(("status"
>> Nick>>> :base-directory "~/lib/status/weekly"
>> Nick>>> :publishing-directory "/ssh:nick@foo.bar.com:~/
>> public_html/logs"
>> Nick>>> :publishing-function org-publish-org-to-html
>> Nick>>> :headline-levels 3
>> Nick>>> :section-numbers nil
>> Nick>>> :table-of-contents nil
>> Nick>>> ; :style nil
>> Nick>>> :auto-preamble t
>> Nick>>> :auto-postamble nil
>> Nick>>> )))
>> Nick>>>
>> Nick>>> (require 'org-publish)
>>
>> Manish>> I have similar settings but I still do not get any output.
>> Any
>> Manish>> ideas what I can check or what other debug information can I
>> Manish>> provide?
>> Manish>>
>> Manish>> Any thoughts appreciated.
>>
>> Carsten> Have you tried
>> Carsten>
>> Carsten> (setq org-publish-use-timestamps-flag nil)
>> Carsten>
>> Carsten>
>> Carsten> ? Maybe you have not changed the input files for a while,
>> and Org thinks
>> Carsten> they have already been published......
>>
>> Works perfectly now!
>>
>> What is curious is that it did not work earlier even when the
>> files were modified and saved. But now it works not just after
>> setting this to nil (publish irrespective of modified time) but
>> publishes correctly with t after the files are modified as it
>> should (it did not work earlier, I swear.)
>
> I guess this means that the tree with the timestamps directory ~/.org-
> timestamps
> was somehow bad, did contain wrong times or was corrupt in another way.
>
> - Carsten
Could I request that this directory is moved to org-directory?
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-23 10:41 ` org-publish Richard G Riley
@ 2008-06-23 14:46 ` Carsten Dominik
0 siblings, 0 replies; 20+ messages in thread
From: Carsten Dominik @ 2008-06-23 14:46 UTC (permalink / raw)
To: Richard G Riley; +Cc: org-mode
On Jun 23, 2008, at 12:41 PM, Richard G Riley wrote:
> Could I request that this directory is moved to org-directory?
You can move it wherever you like by customizing
`org-publish-timestamp-directory'. I don't want to change the default
because people might be switching from one org-directory to another.
- Carsten
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-23 10:39 ` org-publish Richard G Riley
@ 2008-06-23 16:19 ` Carsten Dominik
0 siblings, 0 replies; 20+ messages in thread
From: Carsten Dominik @ 2008-06-23 16:19 UTC (permalink / raw)
To: Richard G Riley; +Cc: org-mode
On Jun 23, 2008, at 12:39 PM, Richard G Riley wrote:
> Carsten Dominik <dominik@science.uva.nl> writes:
>
>> Have you tried
>>
>> (setq org-publish-use-timestamps-flag nil)
>>
>>
>> ? Maybe you have not changed the input files for a while, and Org
>> thinks they have already been published......
>
>
> That fixed it. I had never published before and my first query of this
> variable says it did not exist ...
This is because it is located in a module that is not loaded by
default, only when it is needed.
If you want all these modules loaded, all variable always available, I
think you
can load Org with
(require 'org-install)
(org-require-autoloaded-modules)
- Carsten
^ permalink raw reply [flat|nested] 20+ messages in thread
* org-publish
@ 2008-07-04 15:28 Richard G Riley
2008-07-05 15:30 ` org-publish Carsten Dominik
0 siblings, 1 reply; 20+ messages in thread
From: Richard G Riley @ 2008-07-04 15:28 UTC (permalink / raw)
To: org-mode
I would like to suggest that
C-c C-e P "Publish the project containing the current file." also
publishes any projects which contain that project. e.g I have a
"container project"
("cv"
:components ("cv-html" "cv-raw")
)
This would mean one doesn't have to manually select org-publish and then
enter "cv" to publish the entire project. One can do it using hot keys
from any file within cv-html or cv-raw.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-07-04 15:28 org-publish Richard G Riley
@ 2008-07-05 15:30 ` Carsten Dominik
2008-07-05 15:42 ` org-publish Richard G Riley
0 siblings, 1 reply; 20+ messages in thread
From: Carsten Dominik @ 2008-07-05 15:30 UTC (permalink / raw)
To: Richard G Riley; +Cc: org-mode
On Jul 4, 2008, at 8:28 AM, Richard G Riley wrote:
>
> I would like to suggest that
>
> C-c C-e P "Publish the project containing the current file." also
> publishes any projects which contain that project. e.g I have a
> "container project"
>
> ("cv"
> :components ("cv-html" "cv-raw")
> )
>
> This would mean one doesn't have to manually select org-publish and
> then
> enter "cv" to publish the entire project. One can do it using hot keys
> from any file within cv-html or cv-raw.
But if you have changed only a file in a sub project, what is the need
for publishing the container?
- Carsten
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-07-05 15:30 ` org-publish Carsten Dominik
@ 2008-07-05 15:42 ` Richard G Riley
2008-07-07 15:44 ` org-publish Carsten Dominik
0 siblings, 1 reply; 20+ messages in thread
From: Richard G Riley @ 2008-07-05 15:42 UTC (permalink / raw)
To: Carsten Dominik; +Cc: org-mode, Richard G Riley
Carsten Dominik <dominik@uva.nl> writes:
> On Jul 4, 2008, at 8:28 AM, Richard G Riley wrote:
>
>>
>> I would like to suggest that
>>
>> C-c C-e P "Publish the project containing the current file." also
>> publishes any projects which contain that project. e.g I have a
>> "container project"
>>
>> ("cv"
>> :components ("cv-html" "cv-raw")
>> )
>>
>> This would mean one doesn't have to manually select org-publish and
>> then
>> enter "cv" to publish the entire project. One can do it using hot keys
>> from any file within cv-html or cv-raw.
>
> But if you have changed only a file in a sub project, what is the need
> for publishing the container?
>
> - Carsten
But what if I have changed more than one file? Which (in my case is
typical). Since the timestamps are now working better there is no real
transfer overhead.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-06-22 15:07 ` org-publish Carsten Dominik
2008-06-22 15:27 ` org-publish Manish
2008-06-23 10:39 ` org-publish Richard G Riley
@ 2008-07-07 14:24 ` Rick Moynihan
2008-07-07 15:42 ` org-publish Carsten Dominik
2 siblings, 1 reply; 20+ messages in thread
From: Rick Moynihan @ 2008-07-07 14:24 UTC (permalink / raw)
To: Carsten Dominik; +Cc: org-mode, Richard G Riley
>>
>> I have similar settings but I still do not get any output. Any
>> ideas what I can check or what other debug information can I
>> provide?
>>
>> Any thoughts appreciated.
>>
Just the other day I ran into this problem with org-publish, and it took
me quite a while to realise that I needed to create an org publish
timestamp directory for it to work properly.
Is there a reason why this directory wasn't being created automatically?
Once I created the directory by hand it worked perfectly.
R.
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-07-07 14:24 ` org-publish Rick Moynihan
@ 2008-07-07 15:42 ` Carsten Dominik
0 siblings, 0 replies; 20+ messages in thread
From: Carsten Dominik @ 2008-07-07 15:42 UTC (permalink / raw)
To: Rick Moynihan; +Cc: org-mode, Richard G Riley
On Jul 7, 2008, at 7:24 AM, Rick Moynihan wrote:
>>>
>>> I have similar settings but I still do not get any output. Any
>>> ideas what I can check or what other debug information can I
>>> provide?
>>>
>>> Any thoughts appreciated.
>>>
>
> Just the other day I ran into this problem with org-publish, and it
> took me quite a while to realise that I needed to create an org
> publish timestamp directory for it to work properly.
>
> Is there a reason why this directory wasn't being created
> automatically? Once I created the directory by hand it worked
> perfectly.
This bug has been fixed by now.
- Carsten
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-07-05 15:42 ` org-publish Richard G Riley
@ 2008-07-07 15:44 ` Carsten Dominik
0 siblings, 0 replies; 20+ messages in thread
From: Carsten Dominik @ 2008-07-07 15:44 UTC (permalink / raw)
To: Richard G Riley; +Cc: org-mode
On Jul 5, 2008, at 8:42 AM, Richard G Riley wrote:
> Carsten Dominik <dominik@uva.nl> writes:
>
>> On Jul 4, 2008, at 8:28 AM, Richard G Riley wrote:
>>
>>>
>>> I would like to suggest that
>>>
>>> C-c C-e P "Publish the project containing the current file." also
>>> publishes any projects which contain that project. e.g I have a
>>> "container project"
>>>
>>> ("cv"
>>> :components ("cv-html" "cv-raw")
>>> )
>>>
>>> This would mean one doesn't have to manually select org-publish and
>>> then
>>> enter "cv" to publish the entire project. One can do it using hot
>>> keys
>>> from any file within cv-html or cv-raw.
>>
>> But if you have changed only a file in a sub project, what is the
>> need
>> for publishing the container?
>>
>> - Carsten
>
> But what if I have changed more than one file? Which (in my case is
> typical). Since the timestamps are now working better there is no real
> transfer overhead.
A subproject may be part of several containers.
With the time stamps now properly working, you can also make it a habit
to simply publish everything with `C-c C-e A'.
- Carsten
^ permalink raw reply [flat|nested] 20+ messages in thread
* org-publish
@ 2008-08-20 4:04 David O'Toole
2008-08-20 9:18 ` org-publish Sebastian Rose
0 siblings, 1 reply; 20+ messages in thread
From: David O'Toole @ 2008-08-20 4:04 UTC (permalink / raw)
To: emacs-orgmode
I have some ideas for changes to org-publish. I am helping someone set
up a content-heavy site using Emacs and Org-Mode, and we ran into
several problems that I would like to fix. We have workarounds in place
but these immediately suggested interesting fixes. For example it
doesn't seem possible to publish to .PHP files but maybe I missed
something. I need to reread the code because there seem to have been
many changes since I last looked at it. Furthermore it did not seem
possible to control :auto-preamble and :auto-postamble on a per-file
basis (without setting up a special project just for that one file and
using include/exclude.) Anyone mind if I make some changes and send a
patch? Is there a more recent version than the one in CVS that i should
begin with?
^ permalink raw reply [flat|nested] 20+ messages in thread
* Re: org-publish
2008-08-20 4:04 org-publish David O'Toole
@ 2008-08-20 9:18 ` Sebastian Rose
0 siblings, 0 replies; 20+ messages in thread
From: Sebastian Rose @ 2008-08-20 9:18 UTC (permalink / raw)
To: emacs-orgmode Mailinglist
Hi David,
here are some solutions I could come up with. Maybe one of them is
helpful.
* Customize org
M-x customize-variable org-export-html-extension
and set it to 'php'?
* Apache: use mod_mime or add-handler
You could also use the add-handler directive in your apache config
file or (maybe) .htaccess files to execute your *.html files as PHP.
See:
http://httpd.apache.org/docs/2.2/mod/mod_mime.html#addhandler
or:
http://httpd.apache.org/docs/2.2/mod/mod_mime.html
* Apache and mod_rewrite
You might also set up a .htaccess file like this:
<IfModule mod_rewrite.c>
RewriteEngine on
RewriteBase /
RewriteRule ^(.*)$ passthrough.php$1 [L]
</IfModule>
if you put all your *.html files exported by org into a subdirectory
called org, passthrough.php will be called with the path to that file
relative to /org/.
$PATH_INFO = "org".getenv('PATH_INFO'); // not tested
get's you that relative path (you'll have to strip '#target' and
'?querystring' though).
Now you can open the file, read it line by line and replace what ever
you like (add custom headers and footers...).
Keep in mind, that the exported files are valid XHTML so might want to
use some XML related technique to parse and change the files on the
fly.
Regards,
Sebastian
David O'Toole <dto@gnu.org> writes:
> I have some ideas for changes to org-publish. I am helping someone set
> up a content-heavy site using Emacs and Org-Mode, and we ran into
> several problems that I would like to fix. We have workarounds in place
> but these immediately suggested interesting fixes. For example it
> doesn't seem possible to publish to .PHP files but maybe I missed
> something. I need to reread the code because there seem to have been
> many changes since I last looked at it. Furthermore it did not seem
> possible to control :auto-preamble and :auto-postamble on a per-file
> basis (without setting up a special project just for that one file and
> using include/exclude.) Anyone mind if I make some changes and send a
> patch? Is there a more recent version than the one in CVS that i should
> begin with?
--
Sebastian Rose, Hannover, Germany
Phone: +49 173 83 93 417
Mail.: sebatian_rose@gmx.de, s.rose@emma-stil.de
^ permalink raw reply [flat|nested] 20+ messages in thread
end of thread, other threads:[~2008-08-20 9:16 UTC | newest]
Thread overview: 20+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-06-21 1:27 org-publish Richard G Riley
2008-06-21 4:31 ` org-publish Manish
[not found] ` <7s4p7nouop.fsf@richardriley.net>
[not found] ` <e7cdbe30806210543m361bda09q8357b084531abc67@mail.gmail.com>
2008-06-21 13:05 ` org-publish Richard G Riley
2008-06-22 4:27 ` org-publish Nick Dokos
2008-06-22 14:25 ` org-publish Manish
2008-06-22 15:07 ` org-publish Carsten Dominik
2008-06-22 15:27 ` org-publish Manish
2008-06-22 20:57 ` org-publish Carsten Dominik
2008-06-23 10:41 ` org-publish Richard G Riley
2008-06-23 14:46 ` org-publish Carsten Dominik
2008-06-23 10:39 ` org-publish Richard G Riley
2008-06-23 16:19 ` org-publish Carsten Dominik
2008-07-07 14:24 ` org-publish Rick Moynihan
2008-07-07 15:42 ` org-publish Carsten Dominik
-- strict thread matches above, loose matches on Subject: below --
2008-07-04 15:28 org-publish Richard G Riley
2008-07-05 15:30 ` org-publish Carsten Dominik
2008-07-05 15:42 ` org-publish Richard G Riley
2008-07-07 15:44 ` org-publish Carsten Dominik
2008-08-20 4:04 org-publish David O'Toole
2008-08-20 9:18 ` org-publish Sebastian Rose
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).