* feature request
@ 2011-07-18 21:36 Jude DaShiell
2011-07-18 23:13 ` Bastien
2011-07-19 12:10 ` MidLifeXis at PerlMonks
0 siblings, 2 replies; 43+ messages in thread
From: Jude DaShiell @ 2011-07-18 21:36 UTC (permalink / raw)
To: emacs-orgmode
A little data destruction protection. I put together a table and had to
destroy all copies of it after having tried to set up averages for a
couple columns. The averages didn't work and data got zeroed out and I
lost an entire column of data that way. One of my problems I'm sure was
caused because I tried data gathering first then tried modifying the
original table and adding the formulas later. Next time I attempt
anything with org and mathematics, I'll write my data set down in braille
and ought to have done that with this data set as well. What might have
helped here a little is if a column is going to be put into existing
columns the column inserts rather than overwrites any column that might be
there. The broken table I ended up with had six columns and two of those
were single space columns out to the right with nothing in them. There
ought to have been before I did anything with formulas at most four
columns in the table. I did enter time stamps in as two separated date
and time fields originally then when I read what all could be put into
time stamps, I consolidated those first two columns into a single time
stamp column. I don''t know if that consolidation did further damage or
not.
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2011-07-18 21:36 feature request Jude DaShiell
@ 2011-07-18 23:13 ` Bastien
2011-07-19 12:10 ` MidLifeXis at PerlMonks
1 sibling, 0 replies; 43+ messages in thread
From: Bastien @ 2011-07-18 23:13 UTC (permalink / raw)
To: Jude DaShiell; +Cc: emacs-orgmode
Hi Jude,
when deleting data with just one keystroke (like in the case you
describe), there is always the possibility to _undo_ with C-/
Is there something more we can do?
Best,
--
Bastien
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2011-07-18 21:36 feature request Jude DaShiell
2011-07-18 23:13 ` Bastien
@ 2011-07-19 12:10 ` MidLifeXis at PerlMonks
1 sibling, 0 replies; 43+ messages in thread
From: MidLifeXis at PerlMonks @ 2011-07-19 12:10 UTC (permalink / raw)
To: Jude DaShiell, emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 1708 bytes --]
Recommendation: use something like GIT (or one of the other fine source control systems out there) to checkpoint your work, and save the history of your org files. It can even be set up in emacs to periodically save all org files and check in a snapshot.
HTH,
Brian
________________________________
From: Jude DaShiell <jdashiel@shellworld.net>
To: emacs-orgmode@gnu.org
Sent: Monday, July 18, 2011 4:36 PM
Subject: [O] feature request
A little data destruction protection. I put together a table and had to
destroy all copies of it after having tried to set up averages for a
couple columns. The averages didn't work and data got zeroed out and I
lost an entire column of data that way. One of my problems I'm sure was
caused because I tried data gathering first then tried modifying the
original table and adding the formulas later. Next time I attempt
anything with org and mathematics, I'll write my data set down in braille
and ought to have done that with this data set as well. What might have
helped here a little is if a column is going to be put into existing
columns the column inserts rather than overwrites any column that might be
there. The broken table I ended up with had six columns and two of those
were single space columns out to the right with nothing in them. There
ought to have been before I did anything with formulas at most four
columns in the table. I did enter time stamps in as two separated date
and time fields originally then when I read what all could be put into
time stamps, I consolidated those first two columns into a single time
stamp column. I don''t know if that consolidation did further damage or
not.
[-- Attachment #2: Type: text/html, Size: 2404 bytes --]
^ permalink raw reply [flat|nested] 43+ messages in thread
* Feature request
@ 2021-01-14 17:01 Raoul Comninos
2021-01-17 5:30 ` Ihor Radchenko
2021-01-17 5:31 ` Ihor Radchenko
0 siblings, 2 replies; 43+ messages in thread
From: Raoul Comninos @ 2021-01-14 17:01 UTC (permalink / raw)
To: emacs-orgmode
https://emacs.stackexchange.com/questions/62761/seeing-file-names-in-todo-entries-when-using-org-attach?noredirect=1#comment98901_62761
---
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-14 17:01 Feature request Raoul Comninos
@ 2021-01-17 5:30 ` Ihor Radchenko
2021-01-17 5:33 ` Raoul Comninos
2021-01-17 5:31 ` Ihor Radchenko
1 sibling, 1 reply; 43+ messages in thread
From: Ihor Radchenko @ 2021-01-17 5:30 UTC (permalink / raw)
To: Raoul Comninos, emacs-orgmode
Raoul Comninos <revrari@mweb.co.za> writes:
> https://emacs.stackexchange.com/questions/62761/seeing-file-names-in-todo-entries-when-using-org-attach?noredirect=1#comment98901_62761
> ---
Listing all the attached files used to be the built-in, but it was
removed a few years ago.
Best,
Ihor
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 5:30 ` Ihor Radchenko
@ 2021-01-17 5:33 ` Raoul Comninos
2021-01-17 6:12 ` Ihor Radchenko
0 siblings, 1 reply; 43+ messages in thread
From: Raoul Comninos @ 2021-01-17 5:33 UTC (permalink / raw)
To: Ihor Radchenko; +Cc: emacs-orgmode
Ihor Radchenko <yantar92@gmail.com> writes:
> Raoul Comninos <revrari@mweb.co.za> writes:
>
>> https://emacs.stackexchange.com/questions/62761/seeing-file-names-in-todo-entries-when-using-org-attach?noredirect=1#comment98901_62761
>> ---
>
> Listing all the attached files used to be the built-in, but it was
> removed a few years ago.
>
> Best,
> Ihor
>
Oh, that's a pity. Thanks for responding.
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 5:33 ` Raoul Comninos
@ 2021-01-17 6:12 ` Ihor Radchenko
2021-01-17 6:18 ` Ihor Radchenko
0 siblings, 1 reply; 43+ messages in thread
From: Ihor Radchenko @ 2021-01-17 6:12 UTC (permalink / raw)
To: Raoul Comninos; +Cc: emacs-orgmode
Raoul Comninos <revrari@mweb.co.za> writes:
>> Listing all the attached files used to be the built-in, but it was
>> removed a few years ago.
> Oh, that's a pity. Thanks for responding.
You can still implement it on your side for personal use. There is
org-attach-after-change-hook where you can put a custom function saving
the attached file list (org-attach-file-list) into a property.
Best,
Ihor
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 6:12 ` Ihor Radchenko
@ 2021-01-17 6:18 ` Ihor Radchenko
2021-01-17 8:15 ` Raoul Comninos
0 siblings, 1 reply; 43+ messages in thread
From: Ihor Radchenko @ 2021-01-17 6:18 UTC (permalink / raw)
To: Raoul Comninos; +Cc: emacs-orgmode
I think something like the following will do (untested):
(defun org-attach-save-file-list-to-property ()
"Save list of attachments to ORG_ATTACH_FILES property."
(when-let* ((dir (org-attach-dir))
(files (org-attach-file-list dir)))
(org-set-property "ORG_ATTACH_FILES" (mapconcat #'identity files ", "))))
(add-hook 'org-attach-after-change-hook #'org-attach-save-file-list-to-property)
Best,
Ihor
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 6:18 ` Ihor Radchenko
@ 2021-01-17 8:15 ` Raoul Comninos
2021-01-17 9:01 ` Ihor Radchenko
0 siblings, 1 reply; 43+ messages in thread
From: Raoul Comninos @ 2021-01-17 8:15 UTC (permalink / raw)
To: Ihor Radchenko; +Cc: emacs-orgmode
Ihor Radchenko <yantar92@gmail.com> writes:
> I think something like the following will do (untested):
>
> (defun org-attach-save-file-list-to-property ()
> "Save list of attachments to ORG_ATTACH_FILES property."
> (when-let* ((dir (org-attach-dir))
> (files (org-attach-file-list dir)))
> (org-set-property "ORG_ATTACH_FILES" (mapconcat #'identity files ", "))))
> (add-hook 'org-attach-after-change-hook #'org-attach-save-file-list-to-property)
>
> Best,
> Ihor
I have copied the code to my dot Emacs, but now when I try to add an attachment now, it generates this error:
run-hook-with-args: Wrong number of arguments: (lambda nil "Save list of
attachments to ORG_ATTACH_FILES property." (when-let* ((dir
(org-attach-dir)) (files (org-attach-file-list dir))) (org-set-property
"ORG_ATTACH_FILES" (mapconcat #'identity files ", ")))), 1
Can you help me with this?
Kind regards,
Raoul Comninos
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 8:15 ` Raoul Comninos
@ 2021-01-17 9:01 ` Ihor Radchenko
2021-01-17 9:20 ` Raoul Comninos
2021-01-18 1:46 ` Raoul Comninos
0 siblings, 2 replies; 43+ messages in thread
From: Ihor Radchenko @ 2021-01-17 9:01 UTC (permalink / raw)
To: Raoul Comninos; +Cc: emacs-orgmode
Raoul Comninos <revrari@mweb.co.za> writes:
> I have copied the code to my dot Emacs, but now when I try to add an attachment now, it generates this error:
>
> run-hook-with-args: Wrong number of arguments: (lambda nil "Save list of
> attachments to ORG_ATTACH_FILES property." (when-let* ((dir
> (org-attach-dir)) (files (org-attach-file-list dir))) (org-set-property
> "ORG_ATTACH_FILES" (mapconcat #'identity files ", ")))), 1
>
> Can you help me with this?
You can try:
(defun org-attach-save-file-list-to-property (dir)
"Save list of attachments to ORG_ATTACH_FILES property."
(when-let* ((files (org-attach-file-list dir)))
(org-set-property "ORG_ATTACH_FILES" (mapconcat #'identity files ", "))))
(add-hook 'org-attach-after-change-hook #'org-attach-save-file-list-to-property)
Also, note that the list of files will only be updated if you
attach/delete files calling org-attach. If you change the attachment
folder manually, you will need to run M-x org-attach-sync.
Best,
Ihor
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 9:01 ` Ihor Radchenko
@ 2021-01-17 9:20 ` Raoul Comninos
2021-01-18 2:17 ` Ihor Radchenko
2021-01-18 1:46 ` Raoul Comninos
1 sibling, 1 reply; 43+ messages in thread
From: Raoul Comninos @ 2021-01-17 9:20 UTC (permalink / raw)
To: Ihor Radchenko; +Cc: emacs-orgmode
Ihor Radchenko <yantar92@gmail.com> writes:
> Raoul Comninos <revrari@mweb.co.za> writes:
>
>> I have copied the code to my dot Emacs, but now when I try to add an attachment now, it generates this error:
>>
>> run-hook-with-args: Wrong number of arguments: (lambda nil "Save list of
>> attachments to ORG_ATTACH_FILES property." (when-let* ((dir
>> (org-attach-dir)) (files (org-attach-file-list dir))) (org-set-property
>> "ORG_ATTACH_FILES" (mapconcat #'identity files ", ")))), 1
>>
>> Can you help me with this?
>
> You can try:
>
> (defun org-attach-save-file-list-to-property (dir)
> "Save list of attachments to ORG_ATTACH_FILES property."
> (when-let* ((files (org-attach-file-list dir)))
> (org-set-property "ORG_ATTACH_FILES" (mapconcat #'identity files ", "))))
> (add-hook 'org-attach-after-change-hook #'org-attach-save-file-list-to-property)
>
> Also, note that the list of files will only be updated if you
> attach/delete files calling org-attach. If you change the attachment
> folder manually, you will need to run M-x org-attach-sync.
>
> Best,
> Ihor
It works now and its awesome! I cannot believe that they had this
feature and removed it. I am a very happy man and I cannot thank you enough.
If you have time please add your answer and function to the original
post. I feel others will make use of it too.
https://emacs.stackexchange.com/questions/62761/seeing-file-names-in-todo-entries-when-using-org-attach/62792#62792
Kindest regards,
Raoul Comninos
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 9:20 ` Raoul Comninos
@ 2021-01-18 2:17 ` Ihor Radchenko
2021-01-18 8:19 ` Detlef Steuer
0 siblings, 1 reply; 43+ messages in thread
From: Ihor Radchenko @ 2021-01-18 2:17 UTC (permalink / raw)
To: Raoul Comninos; +Cc: emacs-orgmode
Raoul Comninos <revrari@mweb.co.za> writes:
> It works now and its awesome! I cannot believe that they had this
> feature and removed it. I am a very happy man and I cannot thank you enough.
This feature creates a lot of junk text when attachment folder gets very
large. For example, I keep my travel photos as attachments. There can be
hundreds of photos in a single attachment folder. Showing all the photo
names in a property would be not very useful.
On the other hand, if more people are interested, this feature can be
resurrected as a user-option (disabled by default).
Best,
Ihor
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-18 2:17 ` Ihor Radchenko
@ 2021-01-18 8:19 ` Detlef Steuer
0 siblings, 0 replies; 43+ messages in thread
From: Detlef Steuer @ 2021-01-18 8:19 UTC (permalink / raw)
To: emacs-orgmode
Am Mon, 18 Jan 2021 10:17:11 +0800
schrieb Ihor Radchenko <yantar92@gmail.com>:
> Raoul Comninos <revrari@mweb.co.za> writes:
>
> > It works now and its awesome! I cannot believe that they had this
> > feature and removed it. I am a very happy man and I cannot thank
> > you enough.
>
> This feature creates a lot of junk text when attachment folder gets
> very large. For example, I keep my travel photos as attachments.
> There can be hundreds of photos in a single attachment folder.
> Showing all the photo names in a property would be not very useful.
>
> On the other hand, if more people are interested, this feature can be
> resurrected as a user-option (disabled by default).
As an option I would use it!
Detlef
>
> Best,
> Ihor
>
>
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-17 9:01 ` Ihor Radchenko
2021-01-17 9:20 ` Raoul Comninos
@ 2021-01-18 1:46 ` Raoul Comninos
2021-01-18 2:19 ` Ihor Radchenko
1 sibling, 1 reply; 43+ messages in thread
From: Raoul Comninos @ 2021-01-18 1:46 UTC (permalink / raw)
To: Ihor Radchenko; +Cc: emacs-orgmode
Ihor Radchenko <yantar92@gmail.com> writes:
> Raoul Comninos <revrari@mweb.co.za> writes:
>
>> I have copied the code to my dot Emacs, but now when I try to add an attachment now, it generates this error:
>>
>> run-hook-with-args: Wrong number of arguments: (lambda nil "Save list of
>> attachments to ORG_ATTACH_FILES property." (when-let* ((dir
>> (org-attach-dir)) (files (org-attach-file-list dir))) (org-set-property
>> "ORG_ATTACH_FILES" (mapconcat #'identity files ", ")))), 1
>>
>> Can you help me with this?
>
> You can try:
>
> (defun org-attach-save-file-list-to-property (dir)
> "Save list of attachments to ORG_ATTACH_FILES property."
> (when-let* ((files (org-attach-file-list dir)))
> (org-set-property "ORG_ATTACH_FILES" (mapconcat #'identity files ", "))))
> (add-hook 'org-attach-after-change-hook #'org-attach-save-file-list-to-property)
>
> Also, note that the list of files will only be updated if you
> attach/delete files calling org-attach. If you change the attachment
> folder manually, you will need to run M-x org-attach-sync.
>
> Best,
> Ihor
With your permission can I post your solution to stack-exchange,
crediting you?
Kindest regards,
Raoul Comninos
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2021-01-14 17:01 Feature request Raoul Comninos
2021-01-17 5:30 ` Ihor Radchenko
@ 2021-01-17 5:31 ` Ihor Radchenko
1 sibling, 0 replies; 43+ messages in thread
From: Ihor Radchenko @ 2021-01-17 5:31 UTC (permalink / raw)
To: Raoul Comninos, emacs-orgmode
Raoul Comninos <revrari@mweb.co.za> writes:
> https://emacs.stackexchange.com/questions/62761/seeing-file-names-in-todo-entries-when-using-org-attach?noredirect=1#comment98901_62761
> ---
Listing all the attached files used to be the built-in, but it was
removed a few years ago.
Best,
Ihor
^ permalink raw reply [flat|nested] 43+ messages in thread
* feature request
@ 2013-06-25 15:22 42 147
2013-06-25 16:11 ` Christian Moe
0 siblings, 1 reply; 43+ messages in thread
From: 42 147 @ 2013-06-25 15:22 UTC (permalink / raw)
To: emacs-orgmode
Org-mode has proven tremendously useful in writing musical analyses, but
it would also be nice to provide musical examples in plain text.
Is there anything like this available? If not, I may try to do it
myself. I'm finally getting my act together and finishing the Emacs Lisp
Intro; but any help pointing me to the right examples, or the right
conceptual frameworks would be much appreciate.
Here is more or less what I would want:
----------
----------
----------
----------
----------
Pretend that is the staff. The user places the cursor on the staff, and
therefore enters "note entry mode." The "note-entry" function is passed
three args: one for the note, two for the rhythmic value. So if the user
presses "F," "F" is passed as the first argument; if the user enters
"8", "8" is passed as the second argument; if the user enters ".", "."
is passed as the third argument.
This produces a dotted 8th F note on the staff. The third argument is
optional (since not all rhythmic values are dotted), and its value is
nil by default.
Anyway, that is a draft of what I would want. May already exist with
slightly different functionality.
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2013-06-25 15:22 feature request 42 147
@ 2013-06-25 16:11 ` Christian Moe
2013-06-25 16:29 ` François Pinard
0 siblings, 1 reply; 43+ messages in thread
From: Christian Moe @ 2013-06-25 16:11 UTC (permalink / raw)
To: 42 147; +Cc: emacs-orgmode
42 147 writes:
> Org-mode has proven tremendously useful in writing musical analyses, but
> it would also be nice to provide musical examples in plain text.
>
> Is there anything like this available?
Yes. Org-Babel supports Lilypond. It's magic.
http://www.lilypond.org/
http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-lilypond.html
Yours,
Christian
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2013-06-25 16:11 ` Christian Moe
@ 2013-06-25 16:29 ` François Pinard
2013-06-25 18:31 ` Michael Brand
0 siblings, 1 reply; 43+ messages in thread
From: François Pinard @ 2013-06-25 16:29 UTC (permalink / raw)
To: emacs-orgmode
Christian Moe <mail@christianmoe.com> writes:
> 42 147 writes:
>> Is there anything like this available?
> Yes. Org-Babel supports Lilypond. It's magic.
> http://www.lilypond.org/
> http://orgmode.org/worg/org-contrib/babel/languages/ob-doc-lilypond.html
Somewhere in my old files, I have a reference to an Emacs mode for
entering music visually in a kind of ASCII mode, written by Neil Jerram
if I remember correctly. But this was before Han-Wen and Jan wrote
Lilypond. Now that Lilypond exists, it is an immensely more interesting
avenue, in my opinion. Neil code would be fairly oldish anyway.
I never tried using both Org and Lilypond as suggested, but it looks
like a very appealing idea, I should try it. Thanks for the suggestion.
François
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2013-06-25 16:29 ` François Pinard
@ 2013-06-25 18:31 ` Michael Brand
0 siblings, 0 replies; 43+ messages in thread
From: Michael Brand @ 2013-06-25 18:31 UTC (permalink / raw)
To: François Pinard; +Cc: Org Mode
Hi François
On Tue, Jun 25, 2013 at 6:29 PM, François Pinard
<pinard@iro.umontreal.ca> wrote:
> Somewhere in my old files, I have a reference to an Emacs mode for
> entering music visually in a kind of ASCII mode, written by Neil Jerram
> if I remember correctly.
I am very curios to see how this looked like and how it worked. With a
quick search I was not able to find it.
Michael
^ permalink raw reply [flat|nested] 43+ messages in thread
* Feature request
@ 2010-10-10 13:50 David Abrahams
2010-10-10 15:43 ` Bernt Hansen
` (3 more replies)
0 siblings, 4 replies; 43+ messages in thread
From: David Abrahams @ 2010-10-10 13:50 UTC (permalink / raw)
To: emacs-orgmode
Hi All,
I have to reschedule quite a few items daily. Often they're
yesterday's items that I need to reschedule for today.
`C-c C-s . RET'
is a bit much typing for that, so I re-bound `S' to
org-agenda-schedule. But
`S . RET'
is still a bit much. I'd like it if the default when rescheduling was
always for today, instead of the date the item is already scheduled
for, so I could
`S RET'
in the usual case. What about a customizable option to set the
default schedule-for date?
--
Dave Abrahams
BoostPro Computing
http://www.boostpro.com
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-10 13:50 Feature request David Abrahams
@ 2010-10-10 15:43 ` Bernt Hansen
2010-10-10 18:03 ` David Abrahams
2010-10-10 16:30 ` Memnon Anon
` (2 subsequent siblings)
3 siblings, 1 reply; 43+ messages in thread
From: Bernt Hansen @ 2010-10-10 15:43 UTC (permalink / raw)
To: David Abrahams; +Cc: emacs-orgmode
David Abrahams <dave@boostpro.com> writes:
> Hi All,
>
> I have to reschedule quite a few items daily. Often they're
> yesterday's items that I need to reschedule for today.
>
> `C-c C-s . RET'
>
> is a bit much typing for that, so I re-bound `S' to
> org-agenda-schedule. But
>
> `S . RET'
>
> is still a bit much. I'd like it if the default when rescheduling was
> always for today, instead of the date the item is already scheduled
> for, so I could
>
> `S RET'
>
> in the usual case. What about a customizable option to set the
> default schedule-for date?
Hi David,
Why are you rescheduling items everyday? That seems like a lot of
overhead to me. What's wrong with leaving the item on the first
scheduled date and just allow the agenda to show how many days it has
already been scheduled for -- until you mark it DONE?
Alternatively if it's a repeating task, you can use a single day
repeater and just mark the item DONE to move it to the next day.
One thing I've been trying to do is minimize the amount of time I spend
on overhead stuff for my tasks and trading that for time I actually do
work on completing the tasks instead.
Regards,
Bernt
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-10 15:43 ` Bernt Hansen
@ 2010-10-10 18:03 ` David Abrahams
0 siblings, 0 replies; 43+ messages in thread
From: David Abrahams @ 2010-10-10 18:03 UTC (permalink / raw)
To: Bernt Hansen; +Cc: emacs-orgmode
At Sun, 10 Oct 2010 11:43:07 -0400,
Bernt Hansen wrote:
>
> David Abrahams <dave@boostpro.com> writes:
>
> > Hi All,
> >
> > I have to reschedule quite a few items daily. Often they're
> > yesterday's items that I need to reschedule for today.
> >
> > `C-c C-s . RET'
> >
> > is a bit much typing for that, so I re-bound `S' to
> > org-agenda-schedule. But
> >
> > `S . RET'
> >
> > is still a bit much. I'd like it if the default when rescheduling was
> > always for today, instead of the date the item is already scheduled
> > for, so I could
> >
> > `S RET'
> >
> > in the usual case. What about a customizable option to set the
> > default schedule-for date?
>
> Hi David,
>
> Why are you rescheduling items everyday?
Because there's always something I didn't get done yesterday, and I
often have pushed too many tasks forward onto a given day, and don't
want to see more than about 15 TODOs in my agenda on any given day.
> That seems like a lot of overhead to me. What's wrong with leaving
> the item on the first scheduled date and just allow the agenda to
> show how many days it has already been scheduled for -- until you
> mark it DONE?
Because then they show up in the consciousness like a failure instead
of as just what I have to do today, and they tend to pile up and lead
to a state of despair, where the agenda is too daunting to face. They
need to be processed. I need to re-negotiate the contract I made with
myself about when they were getting done.
> Alternatively if it's a repeating task, you can use a single day
> repeater and just mark the item DONE to move it to the next day.
It's not.
> One thing I've been trying to do is minimize the amount of time I
> spend on overhead stuff for my tasks and trading that for time I
> actually do work on completing the tasks instead.
Thanks, but I need to do this to keep on track.
Regards,
--
Dave Abrahams
BoostPro Computing
http://www.boostpro.com
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-10 13:50 Feature request David Abrahams
2010-10-10 15:43 ` Bernt Hansen
@ 2010-10-10 16:30 ` Memnon Anon
2010-10-10 18:12 ` Juan Pechiar
2010-10-11 7:21 ` Carsten Dominik
3 siblings, 0 replies; 43+ messages in thread
From: Memnon Anon @ 2010-10-10 16:30 UTC (permalink / raw)
To: emacs-orgmode
Hi,
David Abrahams <dave@boostpro.com> writes:
> I have to reschedule quite a few items daily. Often they're
> yesterday's items that I need to reschedule for today.
>
> `C-c C-s . RET'
>
> is a bit much typing for that, so I re-bound `S' to
> org-agenda-schedule. But
>
> `S . RET'
>
> is still a bit much. I'd like it if the default when rescheduling was
> always for today, instead of the date the item is already scheduled
> for, so I could
>
> `S RET'
>
> in the usual case. What about a customizable option to set the
> default schedule-for date?
Just curious: Why don't you use the bulk action?
a) Mark all items with `m'
b) `B' `s' `.' RET.
For 20 items, thats:
20x `m' + 4 Keys for b) = 24 keypresses
(if those items are right next to each other and need no navigation)
Your approach would need 20 item x `S Ret' = 40 keypresses :).
Memnon
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-10 13:50 Feature request David Abrahams
2010-10-10 15:43 ` Bernt Hansen
2010-10-10 16:30 ` Memnon Anon
@ 2010-10-10 18:12 ` Juan Pechiar
2010-10-11 7:21 ` Carsten Dominik
3 siblings, 0 replies; 43+ messages in thread
From: Juan Pechiar @ 2010-10-10 18:12 UTC (permalink / raw)
To: David Abrahams; +Cc: emacs-orgmode
On Sun, Oct 10, 2010 at 09:50:47AM -0400, David Abrahams wrote:
> I have to reschedule quite a few items daily. Often they're
> yesterday's items that I need to reschedule for today.
> `C-c C-s . RET'
> is a bit much typing for that
I use S-right on the agenda buffer, which is quite easy.
Regards,
.j.
P.S. My reason to do this every day: day planning and regaining
consciouness about things to be done. Takes 1 minute at most.
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-10 13:50 Feature request David Abrahams
` (2 preceding siblings ...)
2010-10-10 18:12 ` Juan Pechiar
@ 2010-10-11 7:21 ` Carsten Dominik
2010-10-11 14:18 ` David Abrahams
2011-01-15 12:13 ` Bastien
3 siblings, 2 replies; 43+ messages in thread
From: Carsten Dominik @ 2010-10-11 7:21 UTC (permalink / raw)
To: David Abrahams; +Cc: emacs-orgmode
On Oct 10, 2010, at 3:50 PM, David Abrahams wrote:
>
> Hi All,
>
> I have to reschedule quite a few items daily. Often they're
> yesterday's items that I need to reschedule for today.
>
> `C-c C-s . RET'
>
> is a bit much typing for that, so I re-bound `S' to
> org-agenda-schedule. But
>
> `S . RET'
>
> is still a bit much. I'd like it if the default when rescheduling was
> always for today, instead of the date the item is already scheduled
> for, so I could
>
> `S RET'
>
> in the usual case. What about a customizable option to set the
> default schedule-for date?
After giving this some thought, I don't this this can be done in a
clear and non-confusing way. I do think it is necessary to somehow
change the date relative to what the previously set date is. The only
way to make this half way transparently is to show that date in the
prompt as the default date.
There was lots of good advice to so what you want in different ways,
including not rescheduling, or using bulk actions in the agenda.
Finally, if you still want a fast command doing this:
(defun org-agenda-reschedule-to-today ()
(interactive)
(flet ((org-read-date (&rest rest) (current-time)))
(call-interactively 'org-agenda-schedule)))
- Carsten
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-11 7:21 ` Carsten Dominik
@ 2010-10-11 14:18 ` David Abrahams
2011-01-15 12:13 ` Bastien
1 sibling, 0 replies; 43+ messages in thread
From: David Abrahams @ 2010-10-11 14:18 UTC (permalink / raw)
To: Carsten Dominik; +Cc: emacs-orgmode
At Mon, 11 Oct 2010 09:21:05 +0200,
Carsten Dominik wrote:
>
> After giving this some thought, I don't this this can be done in a
> clear and non-confusing way.
Thanks for spending so much time/energy considering it, despite the
fact that it would be incoherent with the rest of your interface!
> I do think it is necessary to somehow change the date relative to
> what the previously set date is. The only way to make this half way
> transparently is to show that date in the prompt as the default
> date.
Okay.
> There was lots of good advice to so what you want in different ways,
> including not rescheduling, or using bulk actions in the agenda.
You know, I have `f' and `b' bound to org-agenda-date-later/-earlier,
and that would be perfectly adequate for me, *if* I got appropriate
visual feedback. The problem is the red "S2" or "S3" I'm looking at
doesn't change on the fly when I reschedule. And it's hard to train
myself not to hit `f' twice when I see S2 :-)
> Finally, if you still want a fast command doing this:
>
> (defun org-agenda-reschedule-to-today ()
> (interactive)
> (flet ((org-read-date (&rest rest) (current-time)))
> (call-interactively 'org-agenda-schedule)))
That's a good idea. I don't think I need etags in my agenda buffer, so
`M-.' works.
--
Dave Abrahams
BoostPro Computing
http://www.boostpro.com
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature request
2010-10-11 7:21 ` Carsten Dominik
2010-10-11 14:18 ` David Abrahams
@ 2011-01-15 12:13 ` Bastien
1 sibling, 0 replies; 43+ messages in thread
From: Bastien @ 2011-01-15 12:13 UTC (permalink / raw)
To: Carsten Dominik; +Cc: David Abrahams, emacs-orgmode
Carsten Dominik <carsten.dominik@gmail.com> writes:
> Finally, if you still want a fast command doing this:
>
> (defun org-agenda-reschedule-to-today ()
> (interactive)
> (flet ((org-read-date (&rest rest) (current-time)))
> (call-interactively 'org-agenda-schedule)))
Useful, thanks!
I added it to org-hacks.org under this section :
"Reschedule agenda items to today with a single command"
--
Bastien
^ permalink raw reply [flat|nested] 43+ messages in thread
* feature request
@ 2009-03-23 2:14 Robert D. Crawford
2009-03-23 2:44 ` Matthew Lundin
` (2 more replies)
0 siblings, 3 replies; 43+ messages in thread
From: Robert D. Crawford @ 2009-03-23 2:14 UTC (permalink / raw)
To: emacs-orgmode
I've been trying to make an org-remember template that will grab the
title of the webpage I want to create a link to. This seems to not be
possible, although I could very well be wrong. I was curious as to
whether a new keyword could be created for w3 and w3m links. Seems that
:title would be very useful.
I am pretty sure I could code this myself... doesn't seem to be terribly
difficult. It is not likely though that I would ever contribute code to
anything else, so filling out the form and waiting for all of it to get
where it needs to go seems a bit of a waste.
Thanks for listening,
rdc
--
Robert D. Crawford rdc1x@comcast.net
Every journalist has a novel in him, which is an excellent place for it.
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2009-03-23 2:14 feature request Robert D. Crawford
@ 2009-03-23 2:44 ` Matthew Lundin
2009-03-23 13:56 ` Robert D. Crawford
2009-03-23 11:24 ` Sebastian Rose
2009-03-26 4:09 ` Carsten Dominik
2 siblings, 1 reply; 43+ messages in thread
From: Matthew Lundin @ 2009-03-23 2:44 UTC (permalink / raw)
To: Robert D. Crawford; +Cc: emacs-orgmode
Hi Robert,
"Robert D. Crawford" <rdc1x@comcast.net> writes:
> I've been trying to make an org-remember template that will grab the
> title of the webpage I want to create a link to. This seems to not be
> possible, although I could very well be wrong. I was curious as to
> whether a new keyword could be created for w3 and w3m links. Seems that
> :title would be very useful.
When I use w3m, the annotation substitution (%a) in the remember
template does the trick. It grabs the url and title of the current page
(using org-store-link).
For instance, if I call remember while visiting the org-mode home page,
%a in the remember template is replaced by:
[[http://orgmode.org/][Org-Mode: Your Life in Plain Text]]
Best,
Matt
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2009-03-23 2:44 ` Matthew Lundin
@ 2009-03-23 13:56 ` Robert D. Crawford
0 siblings, 0 replies; 43+ messages in thread
From: Robert D. Crawford @ 2009-03-23 13:56 UTC (permalink / raw)
To: emacs-orgmode
Hello Matthew,
Matthew Lundin <mdl@imapmail.org> writes:
>> I've been trying to make an org-remember template that will grab the
>> title of the webpage I want to create a link to. This seems to not be
>> possible, although I could very well be wrong. I was curious as to
>> whether a new keyword could be created for w3 and w3m links. Seems that
>> :title would be very useful.
>
> When I use w3m, the annotation substitution (%a) in the remember
> template does the trick. It grabs the url and title of the current page
> (using org-store-link).
Thanks. This does work for w3m but using w3 it returns this:
*
[[http://www.osnews.com/story/21181/The_IBM_X41_as_a_Lightweight_Linux_Laptop]] :laptop:
from this template:
'((?b "* [[%a] %^g %!" "~/bookmarks.org" bottom)
Later today, if I get the chance, I'll explore the solution proposed by
Sebastian Rose.
Thanks again,
rdc
--
Robert D. Crawford rdc1x@comcast.net
Chinese saying: "He who speak with forked tongue, not need chopsticks."
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2009-03-23 2:14 feature request Robert D. Crawford
2009-03-23 2:44 ` Matthew Lundin
@ 2009-03-23 11:24 ` Sebastian Rose
2009-03-24 16:53 ` Robert D. Crawford
2009-03-26 4:09 ` Carsten Dominik
2 siblings, 1 reply; 43+ messages in thread
From: Sebastian Rose @ 2009-03-23 11:24 UTC (permalink / raw)
To: Robert D. Crawford; +Cc: emacs-orgmode
You night want to use this:
http://github.com/SebastianRose/worglet/tree/master
Which is an attempt to make `org-browser-url.el' and
`org-annotation-handler.el' work without any external dependencies on
shell scripts.
Also, you'll need to set up only one protocol in Firefox/Opera/OS.
The file provides three functions of interest:
org-remember
org-store-link
org-open-source
which do just what their names say.
`org-browser-url.el' and `org-annotation-handler.el' are in the
'contrib' subdirectory of the Org-mode distribution.
Best,
Sebastian
"Robert D. Crawford" <rdc1x@comcast.net> writes:
> I've been trying to make an org-remember template that will grab the
> title of the webpage I want to create a link to. This seems to not be
> possible, although I could very well be wrong. I was curious as to
> whether a new keyword could be created for w3 and w3m links. Seems that
> :title would be very useful.
>
> I am pretty sure I could code this myself... doesn't seem to be terribly
> difficult. It is not likely though that I would ever contribute code to
> anything else, so filling out the form and waiting for all of it to get
> where it needs to go seems a bit of a waste.
>
> Thanks for listening,
> rdc
--
Sebastian Rose, EMMA STIL - mediendesign, Niemeyerstr.6, 30449 Hannover
Tel.: +49 (0)511 - 36 58 472
Fax: +49 (0)1805 - 233633 - 11044
mobil: +49 (0)173 - 83 93 417
Http: www.emma-stil.de
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2009-03-23 11:24 ` Sebastian Rose
@ 2009-03-24 16:53 ` Robert D. Crawford
2009-03-25 13:50 ` Charles Philip Chan
0 siblings, 1 reply; 43+ messages in thread
From: Robert D. Crawford @ 2009-03-24 16:53 UTC (permalink / raw)
To: emacs-orgmode
Sebastian Rose <sebastian_rose@gmx.de> writes:
> You night want to use this:
>
> http://github.com/SebastianRose/worglet/tree/master
Please correct me if I am wrong but this seems to be the wrong solution
for w3 and w3m. I don't use a graphical browser because of my need for
a screen reader. I use emacs and emacspeak almost exclusively for my
computing needs. Sorry I wasn't clear in my needs and use.
Thanks,
rdc
--
Robert D. Crawford rdc1x@comcast.net
All kings is mostly rapscallions.
-- Mark Twain
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Re: feature request
2009-03-24 16:53 ` Robert D. Crawford
@ 2009-03-25 13:50 ` Charles Philip Chan
2009-03-25 14:51 ` Robert D. Crawford
0 siblings, 1 reply; 43+ messages in thread
From: Charles Philip Chan @ 2009-03-25 13:50 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1.1: Type: text/plain, Size: 538 bytes --]
"Robert D. Crawford" <rdc1x@comcast.net> writes:
> I use emacs and emacspeak almost exclusively for my computing
> needs. Sorry I wasn't clear in my needs and use.
I am curious as to why you are using w3, since, from what I have read,
emacspeak supports w3m as well:
http://emacspeak.sourceforge.net/info/html/emacs_002dw3m.html
w3 is so slow and feature incomplete.
Charles
--
"Are [Linux users] lemmings collectively jumping off of the cliff of
reliable, well-engineered commercial software?"
(By Matt Welsh)
[-- Attachment #1.2: Type: application/pgp-signature, Size: 196 bytes --]
[-- Attachment #2: Type: text/plain, Size: 204 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2009-03-25 13:50 ` Charles Philip Chan
@ 2009-03-25 14:51 ` Robert D. Crawford
0 siblings, 0 replies; 43+ messages in thread
From: Robert D. Crawford @ 2009-03-25 14:51 UTC (permalink / raw)
To: emacs-orgmode
Hello Charles,
Charles Philip Chan <cpchan@sympatico.ca> writes:
> "Robert D. Crawford" <rdc1x@comcast.net> writes:
>
>> I use emacs and emacspeak almost exclusively for my computing
>> needs. Sorry I wasn't clear in my needs and use.
>
> I am curious as to why you are using w3, since, from what I have read,
> emacspeak supports w3m as well:
That is true.
> w3 is so slow and feature incomplete.
Slow, yes. Feature incomplete, no. There are several things w3 can do
that w3m cannot. Table navigation, support for aural css, fontification
of all tags (pre, code, and the like immediately come to mind),
different attributes for h[1-6] tags, I am aware of nothing w3m can do
that w3 cannot. Also, since w3 is pure lisp it can be extended in ways
that w3m cannot.
rdc
--
Robert D. Crawford rdc1x@comcast.net
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2009-03-23 2:14 feature request Robert D. Crawford
2009-03-23 2:44 ` Matthew Lundin
2009-03-23 11:24 ` Sebastian Rose
@ 2009-03-26 4:09 ` Carsten Dominik
2009-03-26 16:43 ` Robert D. Crawford
2 siblings, 1 reply; 43+ messages in thread
From: Carsten Dominik @ 2009-03-26 4:09 UTC (permalink / raw)
To: Robert D. Crawford; +Cc: emacs-orgmode
Hi Robert,
if you pull a new git version, the page title will now correctly
appear in links created in w3-mode buffers.
Thanks to all who contributed to this discussion.
- Carsten
On Mar 23, 2009, at 3:14 AM, Robert D. Crawford wrote:
> I've been trying to make an org-remember template that will grab the
> title of the webpage I want to create a link to. This seems to not be
> possible, although I could very well be wrong. I was curious as to
> whether a new keyword could be created for w3 and w3m links. Seems
> that
> :title would be very useful.
>
> I am pretty sure I could code this myself... doesn't seem to be
> terribly
> difficult. It is not likely though that I would ever contribute
> code to
> anything else, so filling out the form and waiting for all of it to
> get
> where it needs to go seems a bit of a waste.
>
> Thanks for listening,
> rdc
> --
> Robert D. Crawford rdc1x@comcast.net
>
> Every journalist has a novel in him, which is an excellent place for
> it.
>
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 43+ messages in thread
* feature request
@ 2007-11-18 18:13 Raimund Kohl-Füchsle
2007-11-19 3:14 ` Bastien
0 siblings, 1 reply; 43+ messages in thread
From: Raimund Kohl-Füchsle @ 2007-11-18 18:13 UTC (permalink / raw)
To: org-mode-mailinglist org-mode
Hi fellows,
I have a question/feature request. Often tables are a very easy and
apropriate way to structure information that are fluent. I work at the
following table (e.g.):
| Hotel | Manager | price | requested | booked |
-----------------------------------------------
| blah | Mayer | 250 | | |
| bluh | Schulze | 260 | | |
------------------------------------------------
Now here comes what would be neat: The tables lists all Hotels who offer
seminar rooms, which person is banquett manager, the price for the
room. Since I often book rooms for seminars (or invite people to
workshops etc.) managing bookings/invitations via tables is more
effective than doing it with TODO-items (more so because the same table
is used over and over again). What would help greatly would be a way to
manage fields the same way as with TODO items: A key-string would place
a "NO" "RUNNING" "ANSWERED" button right there ... same way as with
TODO-items.
Is this already possible? Haven't found it in the manual.
Greetings, ray
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: feature request
2007-11-18 18:13 Raimund Kohl-Füchsle
@ 2007-11-19 3:14 ` Bastien
0 siblings, 0 replies; 43+ messages in thread
From: Bastien @ 2007-11-19 3:14 UTC (permalink / raw)
To: emacs-orgmode
Raimund Kohl-Füchsle <Raimund.Kohl@nabuli.de> writes:
> What would help greatly would be a way to manage fields the same way
> as with TODO items: A key-string would place a "NO" "RUNNING"
> "ANSWERED" button right there ... same way as with TODO-items.
I think what you need is colum view for properties, rather than tables.
Each property is like a field, and you switch between values easily.
You can select the property you want to display in the column view.
Each headline will be displayed as a table row in column view.
And finally, you can capture this column view with C-c C-x r.
See details in the manual:
(info "(org)Column view")
(info "(org)Capturing Column View)
I think it's worth giving it a try. Tables have their own ways of
handling cells and "buttons" would be confusing IMO.
--
Bastien
^ permalink raw reply [flat|nested] 43+ messages in thread
* Feature Request
@ 2006-09-25 23:58 Russell Adams
2006-09-26 12:37 ` Carsten Dominik
0 siblings, 1 reply; 43+ messages in thread
From: Russell Adams @ 2006-09-25 23:58 UTC (permalink / raw)
To: emacs-orgmode
I've gotten in a habit of storing my todo's in the following format,
and I'm curious if there's a way to automate this...
* Daily
** 2006-09
*** 2006-09-25
**** TODO Item One
I don't always have an item for each day, its sparsely populated, but
I'd like to automate making the first few headings.
Any suggestions? Even a macro? ;]
------------------------------------------------------------------
Russell Adams RLAdams@AdamsInfoServ.com
PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature Request
2006-09-25 23:58 Feature Request Russell Adams
@ 2006-09-26 12:37 ` Carsten Dominik
2006-09-27 15:09 ` Russell Adams
0 siblings, 1 reply; 43+ messages in thread
From: Carsten Dominik @ 2006-09-26 12:37 UTC (permalink / raw)
To: Russell Adams; +Cc: emacs-orgmode
On Sep 26, 2006, at 1:58, Russell Adams wrote:
> I've gotten in a habit of storing my todo's in the following format,
> and I'm curious if there's a way to automate this...
>
> * Daily
> ** 2006-09
> *** 2006-09-25
> **** TODO Item One
>
> I don't always have an item for each day, its sparsely populated, but
> I'd like to automate making the first few headings.
>
> Any suggestions? Even a macro? ;]
The cl macro "loop" is your friend....
(defun my-date-tree (y1 y2)
(interactive "nFirst year: \nnLast year: ")
(require 'calendar)
(loop for y from y1 to y2 do
(message "Doing year %d..." y)
(insert "* " (format "%4d" y) "\n")
(loop for m from 1 to 12 do
(insert "** " (format "%4d-%02d" y m) "\n")
(loop for d from 1 to 31 do
(when (= m (car
(calendar-gregorian-from-absolute
(calendar-absolute-from-gregorian
(list m d y)))))
(insert "*** " (format "%4d-%02d-%02d" y m d) "\n"))))))
Hope this helps
- Carsten
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature Request
2006-09-26 12:37 ` Carsten Dominik
@ 2006-09-27 15:09 ` Russell Adams
2007-02-08 16:05 ` Russell Adams
0 siblings, 1 reply; 43+ messages in thread
From: Russell Adams @ 2006-09-27 15:09 UTC (permalink / raw)
To: emacs-orgmode
The way I'm reading that macro, it'll prompt me for a date, etc. That
would be useful for creating a range of dates in a tree if I needed to
define a time period.
I guess I didn't explain myself clearly. I wanted to generate those
dated headings under the "Daily" heading for the current date
only. Just a shortcut so I can hit a single key to add todo items for
today, and have them added to my chronological "Daily" tree.
I've just found that I'm managing TODO and agenda scheduled items
well, but I didn't have a good way to handle all the little
miscellaneous items that pop up. No reason to spend time filing them
elsewhere, just a date would suffice. It also helps keep the tree
sparse when searching.
Russell
On Tue, Sep 26, 2006 at 02:37:27PM +0200, Carsten Dominik wrote:
>
> On Sep 26, 2006, at 1:58, Russell Adams wrote:
>
> >I've gotten in a habit of storing my todo's in the following format,
> >and I'm curious if there's a way to automate this...
> >
> >* Daily
> >** 2006-09
> >*** 2006-09-25
> >**** TODO Item One
> >
> >I don't always have an item for each day, its sparsely populated, but
> >I'd like to automate making the first few headings.
> >
> >Any suggestions? Even a macro? ;]
>
> The cl macro "loop" is your friend....
>
> (defun my-date-tree (y1 y2)
> (interactive "nFirst year: \nnLast year: ")
> (require 'calendar)
> (loop for y from y1 to y2 do
> (message "Doing year %d..." y)
> (insert "* " (format "%4d" y) "\n")
> (loop for m from 1 to 12 do
> (insert "** " (format "%4d-%02d" y m) "\n")
> (loop for d from 1 to 31 do
> (when (= m (car
> (calendar-gregorian-from-absolute
> (calendar-absolute-from-gregorian
> (list m d y)))))
> (insert "*** " (format "%4d-%02d-%02d" y m d) "\n"))))))
>
> Hope this helps
>
> - Carsten
>
------------------------------------------------------------------
Russell Adams RLAdams@AdamsInfoServ.com
PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature Request
2006-09-27 15:09 ` Russell Adams
@ 2007-02-08 16:05 ` Russell Adams
2007-02-08 16:46 ` Carsten Dominik
0 siblings, 1 reply; 43+ messages in thread
From: Russell Adams @ 2007-02-08 16:05 UTC (permalink / raw)
To: emacs-orgmode
I started tinkering, this being my first macro.
I can't say its behaving as I expected.
(defun my-daily-insertion
(interactive)
(beginning-of-buffer)
(re-search-forward "DAILY-INSERTION-POINT")
(forward-line -1)
(insert "*** " (format-time-string "%Y%m%d" (current-time)) )
)
I'd welcome input.
Russell
On Wed, Sep 27, 2006 at 10:09:21AM -0500, Russell Adams wrote:
> The way I'm reading that macro, it'll prompt me for a date, etc. That
> would be useful for creating a range of dates in a tree if I needed to
> define a time period.
>
> I guess I didn't explain myself clearly. I wanted to generate those
> dated headings under the "Daily" heading for the current date
> only. Just a shortcut so I can hit a single key to add todo items for
> today, and have them added to my chronological "Daily" tree.
>
> I've just found that I'm managing TODO and agenda scheduled items
> well, but I didn't have a good way to handle all the little
> miscellaneous items that pop up. No reason to spend time filing them
> elsewhere, just a date would suffice. It also helps keep the tree
> sparse when searching.
>
> Russell
>
> On Tue, Sep 26, 2006 at 02:37:27PM +0200, Carsten Dominik wrote:
> >
> > On Sep 26, 2006, at 1:58, Russell Adams wrote:
> >
> > >I've gotten in a habit of storing my todo's in the following format,
> > >and I'm curious if there's a way to automate this...
> > >
> > >* Daily
> > >** 2006-09
> > >*** 2006-09-25
> > >**** TODO Item One
> > >
> > >I don't always have an item for each day, its sparsely populated, but
> > >I'd like to automate making the first few headings.
> > >
> > >Any suggestions? Even a macro? ;]
> >
> > The cl macro "loop" is your friend....
> >
> > (defun my-date-tree (y1 y2)
> > (interactive "nFirst year: \nnLast year: ")
> > (require 'calendar)
> > (loop for y from y1 to y2 do
> > (message "Doing year %d..." y)
> > (insert "* " (format "%4d" y) "\n")
> > (loop for m from 1 to 12 do
> > (insert "** " (format "%4d-%02d" y m) "\n")
> > (loop for d from 1 to 31 do
> > (when (= m (car
> > (calendar-gregorian-from-absolute
> > (calendar-absolute-from-gregorian
> > (list m d y)))))
> > (insert "*** " (format "%4d-%02d-%02d" y m d) "\n"))))))
> >
> > Hope this helps
> >
> > - Carsten
> >
> ------------------------------------------------------------------
> Russell Adams RLAdams@AdamsInfoServ.com
>
> PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
>
> Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
------------------------------------------------------------------
Russell Adams RLAdams@AdamsInfoServ.com
PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
^ permalink raw reply [flat|nested] 43+ messages in thread
* Re: Feature Request
2007-02-08 16:05 ` Russell Adams
@ 2007-02-08 16:46 ` Carsten Dominik
0 siblings, 0 replies; 43+ messages in thread
From: Carsten Dominik @ 2007-02-08 16:46 UTC (permalink / raw)
To: Russell Adams; +Cc: emacs-orgmode
On Feb 8, 2007, at 17:05, Russell Adams wrote:
> I started tinkering, this being my first macro.
Looks very good already.
>
> I can't say its behaving as I expected.
>
> (defun my-daily-insertion
Every funtion needs an argument list, even if it is the empty one:
(defun my-daily-insertion ()
> (interactive)
> (beginning-of-buffer)
Correct, but better use (goto-char (point-min)), has fewer side
effects.
> (re-search-forward "DAILY-INSERTION-POINT")
> (forward-line -1)
> (insert "*** " (format-time-string "%Y%m%d" (current-time)) )
> )
Looks all fine to me.
- Carsten
>
> I'd welcome input.
>
> Russell
>
> On Wed, Sep 27, 2006 at 10:09:21AM -0500, Russell Adams wrote:
>> The way I'm reading that macro, it'll prompt me for a date, etc. That
>> would be useful for creating a range of dates in a tree if I needed to
>> define a time period.
>>
>> I guess I didn't explain myself clearly. I wanted to generate those
>> dated headings under the "Daily" heading for the current date
>> only. Just a shortcut so I can hit a single key to add todo items for
>> today, and have them added to my chronological "Daily" tree.
>>
>> I've just found that I'm managing TODO and agenda scheduled items
>> well, but I didn't have a good way to handle all the little
>> miscellaneous items that pop up. No reason to spend time filing them
>> elsewhere, just a date would suffice. It also helps keep the tree
>> sparse when searching.
>>
>> Russell
>>
>> On Tue, Sep 26, 2006 at 02:37:27PM +0200, Carsten Dominik wrote:
>>>
>>> On Sep 26, 2006, at 1:58, Russell Adams wrote:
>>>
>>>> I've gotten in a habit of storing my todo's in the following format,
>>>> and I'm curious if there's a way to automate this...
>>>>
>>>> * Daily
>>>> ** 2006-09
>>>> *** 2006-09-25
>>>> **** TODO Item One
>>>>
>>>> I don't always have an item for each day, its sparsely populated,
>>>> but
>>>> I'd like to automate making the first few headings.
>>>>
>>>> Any suggestions? Even a macro? ;]
>>>
>>> The cl macro "loop" is your friend....
>>>
>>> (defun my-date-tree (y1 y2)
>>> (interactive "nFirst year: \nnLast year: ")
>>> (require 'calendar)
>>> (loop for y from y1 to y2 do
>>> (message "Doing year %d..." y)
>>> (insert "* " (format "%4d" y) "\n")
>>> (loop for m from 1 to 12 do
>>> (insert "** " (format "%4d-%02d" y m) "\n")
>>> (loop for d from 1 to 31 do
>>> (when (= m (car
>>> (calendar-gregorian-from-absolute
>>> (calendar-absolute-from-gregorian
>>> (list m d y)))))
>>> (insert "*** " (format "%4d-%02d-%02d" y m d) "\n"))))))
>>>
>>> Hope this helps
>>>
>>> - Carsten
>>>
>> ------------------------------------------------------------------
>> Russell Adams RLAdams@AdamsInfoServ.com
>>
>> PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
>>
>> Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
> ------------------------------------------------------------------
> Russell Adams RLAdams@AdamsInfoServ.com
>
> PGP Key ID: 0x1160DCB3 http://www.adamsinfoserv.com/
>
> Fingerprint: 1723 D8CA 4280 1EC9 557F 66E8 1154 E018 1160 DCB3
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
--
Carsten Dominik
Sterrenkundig Instituut "Anton Pannekoek"
Universiteit van Amsterdam
Kruislaan 403
NL-1098SJ Amsterdam
phone: +31 20 525 7477
^ permalink raw reply [flat|nested] 43+ messages in thread
end of thread, other threads:[~2021-01-18 8:20 UTC | newest]
Thread overview: 43+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-07-18 21:36 feature request Jude DaShiell
2011-07-18 23:13 ` Bastien
2011-07-19 12:10 ` MidLifeXis at PerlMonks
-- strict thread matches above, loose matches on Subject: below --
2021-01-14 17:01 Feature request Raoul Comninos
2021-01-17 5:30 ` Ihor Radchenko
2021-01-17 5:33 ` Raoul Comninos
2021-01-17 6:12 ` Ihor Radchenko
2021-01-17 6:18 ` Ihor Radchenko
2021-01-17 8:15 ` Raoul Comninos
2021-01-17 9:01 ` Ihor Radchenko
2021-01-17 9:20 ` Raoul Comninos
2021-01-18 2:17 ` Ihor Radchenko
2021-01-18 8:19 ` Detlef Steuer
2021-01-18 1:46 ` Raoul Comninos
2021-01-18 2:19 ` Ihor Radchenko
2021-01-17 5:31 ` Ihor Radchenko
2013-06-25 15:22 feature request 42 147
2013-06-25 16:11 ` Christian Moe
2013-06-25 16:29 ` François Pinard
2013-06-25 18:31 ` Michael Brand
2010-10-10 13:50 Feature request David Abrahams
2010-10-10 15:43 ` Bernt Hansen
2010-10-10 18:03 ` David Abrahams
2010-10-10 16:30 ` Memnon Anon
2010-10-10 18:12 ` Juan Pechiar
2010-10-11 7:21 ` Carsten Dominik
2010-10-11 14:18 ` David Abrahams
2011-01-15 12:13 ` Bastien
2009-03-23 2:14 feature request Robert D. Crawford
2009-03-23 2:44 ` Matthew Lundin
2009-03-23 13:56 ` Robert D. Crawford
2009-03-23 11:24 ` Sebastian Rose
2009-03-24 16:53 ` Robert D. Crawford
2009-03-25 13:50 ` Charles Philip Chan
2009-03-25 14:51 ` Robert D. Crawford
2009-03-26 4:09 ` Carsten Dominik
2009-03-26 16:43 ` Robert D. Crawford
2007-11-18 18:13 Raimund Kohl-Füchsle
2007-11-19 3:14 ` Bastien
2006-09-25 23:58 Feature Request Russell Adams
2006-09-26 12:37 ` Carsten Dominik
2006-09-27 15:09 ` Russell Adams
2007-02-08 16:05 ` Russell Adams
2007-02-08 16:46 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).