From: "Eric Schulte" <schulte.eric@gmail.com>
To: "Sébastien Vauban" <wxhgmqzgwmuf@spammotel.com>
Cc: emacs-orgmode@gnu.org
Subject: Re: Re: Beamer presentation in the document
Date: Thu, 10 Jun 2010 10:11:29 -0700 [thread overview]
Message-ID: <87r5keolry.fsf@gmail.com> (raw)
In-Reply-To: <87k4q7tiub.fsf@mundaneum.com> ("Sébastien Vauban"'s message of "Thu, 10 Jun 2010 10:03:40 +0200")
Hi
Sébastien Vauban <wxhgmqzgwmuf@spammotel.com> writes:
> Hi Eric,
>
> "Eric Schulte" wrote:
>> Sébastien Vauban <wxhgmqzgwmuf@spammotel.com> writes:
>>>
>>> 1. How could I use the same table in the slides as in the document, without
>>> copy/pasting it?
>>>
>>> Is there, maybe, some Babel black magic at hand? Export/import?
>>
>> The following babel solution should work.
>
> I was sure you had "black magic" to provide us with. Thanks a lot (once
> again)!
>
>
>> It uses a code block to copy the contents of the table into the presentation
>> on export.
>
> I played a bit with this example. Remarks follow.
>
> #+TITLE: Complete Minimal Example
> #+AUTHOR: Sébastien Vauban
> #+EMAIL: wxhgmqzgwmuf@spammotel.com
> #+DATE: 2010-06-10
> #+LANGUAGE: en_US
>
> # This code block won't show in any export
> #+source: echo
> #+begin_src emacs-lisp :var tab='(("echo")) :exports none
> tab
> #+end_src
>
> * Document
>
> ** Results
>
> #+ATTR_LaTeX: align=lr
> #+tblname: rate-&-interests
> | Rate (%) | Interests |
> |----------+-------------|
> | 3.50 | 2564935.21 |
> | 4.00 | 2931354.52 |
> | 4.50 | 3297773.83 |
> | 5.00 | 3664193.15 |
> | 5.50 | 4030612.46 |
> |----------+-------------|
> | 22.5 | 16488869.17 |
> #+TBLFM: @7$1=vsum(@-I..@-II)::@7$2=vsum(@-I..@-II)
>
> * Presentation
>
> Amounts -- here is the table
> #+call: echo(tab=rate-&-interests) :exports results
>
> #+results: echo(tab=rate-&-interests)
> | Rate (%) | Interests |
> | 3.5 | 2564935.21 |
> | 4.0 | 2931354.52 |
> | 4.5 | 3297773.83 |
> | 5.0 | 3664193.15 |
> | 5.5 | 4030612.46 |
> | 22.5 | 16488869.17 |
> #+ATTR_LaTeX: align=lr
>
> and the small explanation.
>
Great points Thanks.
>
> 1. On the echo functionality itself, everything is perfect, but for
> the horizontal lines that are not echo'ed.
>
hlines are preservable with the :hlines header argument, see the example
below [1].
Were working on integrating the babel documentation in the org-mode
documentation which should really help in terms of making these more
exotic header arguments accessible/discoverable to users.
>
> 2. For Babel, more generally, some remarks that I have for a while,
>but always
> forget to report (as you're allowed to consider them as "details" ;-)):
>
> - Babel does not find the tables if the `#+tblname: XXX' instruction is not
> located at column 0 -- annoying for me, as I try to perfectly align all
> the text and source code based on `org-indent'-like functionality;
>
Good catch, this has been fixed.
>
> - the `results' block is not "naturally" aligned either;
>
Again, thanks for pointing this out. This has been fixed for results
which already have an indented
#+results:
line, for the first time a block is run the results will not be indented
currently, although it would probably be worthwhile to default to
indenting the results to the same level as the code block -- I'll add
this as a TODO.
>
> - less a detail than the 2 above: would it be possible to leave
> some text between the `call' and the `results': in this example, so
> that the `align' statement does not move after the table whenever
> we `C-c C-c' the block for executing the `echo'?
>
See the example below [1], is it sufficient to squeeze the #+results
line in between the #+attr_latex line and the table? If not I'll update
the results handling so that we allow preservation of comment lines
between #+results and it's contents.
>
>
>> I think I'll add the "echo" code block in the below example to the library
>> of babel, so in the future this should work w/o having to include the code
>> block in the file.
>
> I think so as well. This is a must for enabling us to insert slides into a
> document. And something nobody else (PowerPoint, even plain LaTeX?) can do
> (AFAIK).
>
done.
Thanks for all the great feedback! -- Eric
>
> Best regards,
> Seb
Footnotes:
[1]
--8<---------------cut here---------------start------------->8---
#+TITLE: Complete Minimal Example
#+AUTHOR: Sébastien Vauban
#+EMAIL: wxhgmqzgwmuf@spammotel.com
#+DATE: 2010-06-10
#+LANGUAGE: en_US
# This code block won't show in any export
#+source: echo
#+begin_src emacs-lisp :var tab='(("echo")) :exports none
tab
#+end_src
* Document
** Results
#+ATTR_LaTeX: align=lr
#+tblname: rate-&-interests
| Rate (%) | Interests |
|----------+-------------|
| 3.50 | 2564935.21 |
| 4.00 | 2931354.52 |
| 4.50 | 3297773.83 |
| 5.00 | 3664193.15 |
| 5.50 | 4030612.46 |
|----------+-------------|
| 22.5 | 16488869.17 |
#+TBLFM: @7$1=vsum(@-I..@-II)::@7$2=vsum(@-I..@-II)
* Presentation
Amounts -- here is the table
#+call: echo(tab=rate-&-interests) :exports results :hlines yes
#+ATTR_LaTeX: align=lr
#+results: echo(tab=rate-&-interests)
| Rate (%) | Interests |
|----------+-------------|
| 3.5 | 2564935.21 |
| 4.0 | 2931354.52 |
| 4.5 | 3297773.83 |
| 5.0 | 3664193.15 |
| 5.5 | 4030612.46 |
|----------+-------------|
| 22.5 | 16488869.17 |
and the small explanation.
--8<---------------cut here---------------end--------------->8---
next prev parent reply other threads:[~2010-06-10 17:27 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-06-09 9:25 Beamer presentation in the document Sébastien Vauban
2010-06-09 17:18 ` Eric Schulte
2010-06-10 8:03 ` Sébastien Vauban
2010-06-10 17:11 ` Eric Schulte [this message]
2010-06-10 21:36 ` Sébastien Vauban
2010-06-10 21:55 ` Eric Schulte
2010-06-21 9:34 ` Sébastien Vauban
2010-06-10 8:36 ` Sébastien Vauban
2010-06-11 7:29 ` Sébastien Vauban
2010-06-21 9:46 ` Sébastien Vauban
2010-06-21 20:03 ` Eric S Fraga
2010-06-24 6:39 ` Carsten Dominik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87r5keolry.fsf@gmail.com \
--to=schulte.eric@gmail.com \
--cc=emacs-orgmode@gnu.org \
--cc=wxhgmqzgwmuf@spammotel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).