From: Eric Schulte <schulte.eric@gmail.com>
To: Torsten Wagner <torsten.wagner@gmail.com>
Cc: Org Mode Mailing List <emacs-orgmode@gnu.org>
Subject: Re: [babel] Table as varaiables a differently proccesed by #+call lines vs. source code blocks
Date: Thu, 25 Jul 2013 07:43:11 -0600 [thread overview]
Message-ID: <874nbin4ak.fsf@gmail.com> (raw)
In-Reply-To: CAPaq-gM=usFEkj8HkSXtSVMw1VSXzK7RT1nd7o-1GaYHyhS7Ug@mail.gmail.com
Torsten Wagner <torsten.wagner@gmail.com> writes:
> Dear Eric,
>
> please find attached a patch, to describe the different standard values for
> system-wide header arguments in the manual.
> Hope that might help to avoid confusion in the future.
>
> All the best
>
Thanks for sending this along. Would you mind making two small changes?
1. Format the patch by first committing it to your local git repo, and
then generating the patch with "git format-patch -o /tmp/ HEAD~1",
which will write the patch to your /tmp/ directory. That way it will
easily apply (this version does not apply for me).
Also, please put the string TINYCHANGE in your commit message,
because the patch is small and you haven't signed the FSF papers.
see http://orgmode.org/worg/org-contribute.html
2. I we shouldn't put the actual values in the manual, as they will
likely change in the code at some point, and then the manual and code
will be incomplete. The values of any emacs variable are easily
looked up, either with elisp or through the customization interface.
Thanks,
>
> Torsten
>
>
> On 25 July 2013 00:30, Eric Schulte <schulte.eric@gmail.com> wrote:
>
>> Torsten Wagner <torsten.wagner@gmail.com> writes:
>>
>> > Hi Rick, Hi Sebastien,
>> >
>> > thanks for your inputs.
>> > Well I guess Sebastien is half-right. The different settings make at
>> least
>> > it even more tricky to see what is going on.
>> > Here is a table with the settings as I found them on my system (which I
>> did
>> > not change)
>> >
>> > #+BEGIN_ORG
>> >
>> > | org-babel-default-header-args | ((:session . "none") (:results .
>> > "replace") (:exports . "code") (:cache . "no") (:noweb . "no") (:hlines .
>> > "no") (:tangle . "no") (:padnewline . "yes")) |
>> > | org-babel-default-lob-header-args | ((:exports .
>> > "results"))
>> > |
>> > | org-babel-default-inline-header-args | ((:session . "none")(:results .
>> > "replace")(:exports .
>> > "results"))
>> > |
>> >
>> > #+END_ORG
>> >
>> > As you can see the most prominent cause for trouble might be :hlines
>> > As Rick should in his message it does still not solve all problems but it
>> > helps to make it more clear.
>> >
>>
>> This is related to
>> http://thread.gmane.org/gmane.emacs.orgmode/73976/focus=74175.
>>
>> >
>> > I assume Eric is on holiday or otherwise busy but I guess he will find
>> this
>> > thread and might can give us some idea, whether there was an intention in
>> > dealing with tables in that way or whether it is really considered as a
>> bug.
>> >
>>
>> Yes, I've been very busy.
>>
>> >
>> > However, Sebastian pointed out a very important fact. Different default
>> > settings for different ways of calling a source code block. I believe
>> that
>> > this should find its way into the manual.
>> >
>>
>> I'm happy to apply patches to the manual.
>>
>> >
>> > All the best
>> >
>> > Torsten
>> >
>> >
>> >
>> >
>> > On 22 July 2013 13:20, Torsten Wagner <torsten.wagner@gmail.com> wrote:
>> >
>> >> Hi,
>> >>
>> >> I want to summarize the problem I found, using tables as input to source
>> >> code blocks.
>> >> This observation was shared with Rick and I would be glad to help fixing
>> >> that.
>> >>
>> >> Within the attached file one can see a typical example.
>> >>
>> >> It all comes down to a differently interpretation of tables with
>> respect
>> >> to horizontal line.
>> >>
>> >> #+TBLNAME: with-hline
>> >> | A | B | C |
>> >> |---+---+---|
>> >> | 1 | 2 | 3 |
>> >> | X | Y | Z |
>> >>
>> >> and
>> >>
>> >> #+TBLNAME: without-hline
>> >> | A | B | C |
>> >> | 1 | 2 | 3 |
>> >> | X | Y | Z |
>> >>
>> >> will give different results being called by
>> >>
>> >> #+name: python-element
>> >> #+begin_src python :var table=with-hline :exports results
>> >> return table[1]
>> >> #+end_src
>> >>
>> >> or
>> >>
>> >> #+CALL: python-echo(with-hline)
>> >>
>> >> Please see the attached file for details.
>> >>
>> >> From what I was able to observe:
>> >>
>> >> 1. Calling a table with hline, the result of the source code block miss
>> >> the first row. Indexing is possible only for the second and third row
>> (in
>> >> the given example)
>> >>
>> >> 2. Having no hline, the first row is available, indexing of the first
>> row
>> >> works too.
>> >>
>> >> Using a Call construct:
>> >> 1. for a table without hline, indexing works but it does not work for a
>> >> table with hline.
>> >> 2. Interestingly, using the CALL functions, the type of both tables in
>> >> python is list for the entire table, however, indexing a table with
>> hlines,
>> >> the type becomes NoneType whereas for a table without hline it is still
>> of
>> >> type list.
>> >>
>> >>
>> >> Hope that can somehow help to get an idea what is going on.
>> >>
>> >>
>> >> Greetings
>> >>
>> >> Torsten
>> >>
>> >>
>> >>
>> >>
>> >>
>> >>
>>
>> --
>> Eric Schulte
>> http://cs.unm.edu/~eschulte
>>
>
> diff --git a/doc/org.texi b/doc/org.texi
> index 55c421d..d8987d6 100644
> --- a/doc/org.texi
> +++ b/doc/org.texi
> @@ -14066,6 +14066,16 @@ blocks.
> (assq-delete-all :noweb org-babel-default-header-args)))
> @end lisp
>
> +The different ways of calling a source code block might come with different system-wide values of header arguments.
> +Thus, the behaviour of a source code block might differ, depending on the way how it was called. The table below depicts the variables and standard values for the different ways to execute a source code block.
> +
> +@multitable @columnfractions 0.1 0.1 0.3
> +@item @b{Method} @tab @b{Variable} @tab @b{Values}
> +@item source code block @tab org-babel-default-header-args @tab :session "none", :results "replace", :exports "code", :cache "no", :noweb "no", :hlines "no", :tangle "no", :padnewline "yes"
> +@item inline call @tab org-babel-default-inline-header-args @tab :exports "results"
> +@item function calls @tab org-babel-default-lob-header-args @tab :session "none", :results "replace", :exports "results"
> +@end multitable
> +
> @node Language-specific header arguments, Header arguments in Org mode properties, System-wide header arguments, Using header arguments
> @subsubheading Language-specific header arguments
> Each language can define its own set of default header arguments in variable
--
Eric Schulte
http://cs.unm.edu/~eschulte
next prev parent reply other threads:[~2013-07-25 13:46 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-22 11:20 [babel] Table as varaiables a differently proccesed by #+call lines vs. source code blocks Torsten Wagner
2013-07-23 12:25 ` Sebastien Vauban
2013-07-23 15:40 ` Rick Frankel
2013-07-24 8:48 ` Torsten Wagner
2013-07-24 22:30 ` Eric Schulte
2013-07-25 11:40 ` Torsten Wagner
2013-07-25 12:37 ` Jambunathan K
2013-07-25 13:43 ` Eric Schulte [this message]
-- strict thread matches above, loose matches on Subject: below --
2013-07-25 17:02 Rick Frankel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874nbin4ak.fsf@gmail.com \
--to=schulte.eric@gmail.com \
--cc=emacs-orgmode@gnu.org \
--cc=torsten.wagner@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).