emacs-orgmode@gnu.org archives
 help / color / mirror / code / Atom feed
* Publishing Projects to Html
@ 2009-06-29 15:44 charles snyder
  2009-06-29 16:49 ` Manish
  2009-06-30  0:14 ` Bastien
  0 siblings, 2 replies; 9+ messages in thread
From: charles snyder @ 2009-06-29 15:44 UTC (permalink / raw)
  To: emacs-orgmode


[-- Attachment #1.1: Type: text/plain, Size: 935 bytes --]

Hi

I have been trying out 'publish projects' in org mode. It works perfectly
(following the instructions on Sebastian's tutorial), but I have a very
basic question - The tutorial describes putting

(require 'org-publish)
(setq org-publish-project-alist
      '(

       ;; ... add all the components here (see below)...

      ))

into the *scratch* buffer, followed by C-x C-e two times. Other than
re-entering all the "org-publish-project-alist" info each time I publish to
HTML, where does this code go -

? into my .emacs file
? change it via org menu -> customize -> customize -> Org Publishing -> Org
Publish Project alist
? a separate file

On a related note, searching the mailing list on the org main page doesn't
seem to work :

*Warning*: Unable to include
'/cgi-bin/omega.cgi?query=publish&group=gmane.emacs.orgmode' - request
execution failed in */home/xapian/html/index.php* on line *105

*Thanks !*

*Charles Snyder*
*

[-- Attachment #1.2: Type: text/html, Size: 1279 bytes --]

[-- Attachment #2: Type: text/plain, Size: 204 bytes --]

_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Publishing Projects to Html
  2009-06-29 15:44 Publishing Projects to Html charles snyder
@ 2009-06-29 16:49 ` Manish
  2009-06-30  0:14 ` Bastien
  1 sibling, 0 replies; 9+ messages in thread
From: Manish @ 2009-06-29 16:49 UTC (permalink / raw)
  To: charles snyder; +Cc: emacs-orgmode

  On Mon, Jun 29, 2009 at 9:14 PM, charles snyder wrote:
  > Hi
  >
  > I have been trying out 'publish projects' in org mode. It works
  > perfectly (following the instructions on Sebastian's tutorial), but
  > I have a very basic question - The tutorial describes putting
  >
  > (require 'org-publish)
  > (setq org-publish-project-alist
  >       '(
  >
  >        ;; ... add all the components here (see below)...
  >
  >
  >       ))
  >
  > into the *scratch* buffer, followed by C-x C-e two times. Other than
  > re-entering all the "org-publish-project-alist" info each time I
  > publish to HTML, where does this code go -
  >
  > ? into my .emacs file
  > ? change it via org menu -> customize -> customize -> Org Publishing -> Org
  > Publish Project alist
  > ? a separate file

You can keep the org-publish-project-alist settings into .emacs.  It
still goes to .emacs if you change it via customize (unless you
customize custom-file as well.)

-- 
Manish

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Publishing Projects to Html
  2009-06-29 15:44 Publishing Projects to Html charles snyder
  2009-06-29 16:49 ` Manish
@ 2009-06-30  0:14 ` Bastien
  2009-07-06  6:00   ` Bastien
  1 sibling, 1 reply; 9+ messages in thread
From: Bastien @ 2009-06-30  0:14 UTC (permalink / raw)
  To: charles snyder; +Cc: emacs-orgmode

Hi Charles,

charles snyder <clsnyder@gmail.com> writes:

> I have been trying out 'publish projects' in org mode. It works perfectly
> (following the instructions on Sebastian's tutorial), but I have a very basic
> question - The tutorial describes putting
>
> (require 'org-publish)
> (setq org-publish-project-alist
>       '(
>
>        ;; ... add all the components here (see below)...
>
>       ))
>
> into the *scratch* buffer, followed by C-x C-e two times. Other than
> re-entering all the "org-publish-project-alist" info each time I publish to
> HTML, where does this code go -
>
> ? into my .emacs file
> ? change it via org menu -> customize -> customize -> Org Publishing -> Org
> Publish Project alist
> ? a separate file

I store the (setq org-publish-project-alist ...) variable in a separate
~/elisp/config/org-config.el file which looks like this:

,----
| (setq org-publish-project-alist ...)
| (setq org-blabla ...)
| (provide 'org-config)
`----

For this file to be loaded by emacs, you need to add its location to the
load-path, and to require the feature it provides:

,----
| (add-to-list 'load-path "~/elisp/config/")
| (require 'org-config)
`----

HTH

> On a related note, searching the mailing list on the org main page doesn't seem
> to work :
>
> Warning: Unable to include '/cgi-bin/omega.cgi?query=publish&group=
> gmane.emacs.orgmode' - request execution failed in /home/xapian/html/index.php
> on line 105

This is a problem on Gmane, I wrote to the maintainer, thanks.

-- 
 Bastien

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Publishing Projects to Html
  2009-06-30  0:14 ` Bastien
@ 2009-07-06  6:00   ` Bastien
  2009-07-07  2:37     ` Problem with Export-exclude-tags and tags:nil Kristina M. Spurgin
  0 siblings, 1 reply; 9+ messages in thread
From: Bastien @ 2009-07-06  6:00 UTC (permalink / raw)
  To: charles snyder; +Cc: emacs-orgmode

Bastien <bastienguerry@googlemail.com> writes:

>> Warning: Unable to include '/cgi-bin/omega.cgi?query=publish&group=
>> gmane.emacs.orgmode' - request execution failed in /home/xapian/html/index.php
>> on line 105
>
> This is a problem on Gmane, I wrote to the maintainer, thanks.

The problem is fixed, the search on gmane archives is now okay.

-- 
 Bastien

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Problem with Export-exclude-tags and tags:nil
  2009-07-06  6:00   ` Bastien
@ 2009-07-07  2:37     ` Kristina M. Spurgin
  2009-07-07  4:07       ` Carsten Dominik
  0 siblings, 1 reply; 9+ messages in thread
From: Kristina M. Spurgin @ 2009-07-07  2:37 UTC (permalink / raw)
  To: emacs-orgmode

Hi, 

I've already found and corrected the stupid typo, and that didn't fix this 
problem, so it's time to call for help. 

I just downloaded 6.28e last night. I am using GNU Emacs, 22.3.1 on Windows 
XP.

I'm trying to export an org file to LaTeX, and overall it is working ok. 
However, I cannot seem to get the options #+EXPORT_EXCLUDE_TAGS  and 
#+OPTIONS:...tags:nil to work. I've looked around some at org-export-general 
options, and I deleted the only old export setup file I had. I would think that 
options listed in the file would take precedence over those, though. 

Below are a truncated version of my org file and then the LaTeX output 
resulting from C-c C-e l. The section with the tag listed in export-exclude is 
in the output. The tag on that section is not in the output, however. My 
understanding of this setting was that it would prevent the tree from export, 
not just the keyword. The tags on other sections are also in the output, 
though I have tags:nil. 

#+OPTIONS is all on one line in my file.

For the exclude tags option, I tried: 
:noexportlatex: 
:noexportlatex
and what you see below.

I did do C-c C-c in each of the options lines after adding them. 

I also tried without blank line between top options and #LATEX OPTIONS (I also 
could not get export to ignore options marked with begin/end html block.)

Thanks for any help, and for org-mode in general. I voted. :-) 

--Kristina

-=-=-test.org-=-=-
#+TITLE:     A test page
#+AUTHOR:    Kristina M. Spurgin
#+EMAIL:     kristina@infomuse.net
#+DATE:      2008-11-10 Mon
#+LANGUAGE:  en

# LATEX OPTIONS
#+OPTIONS:   H:4 num:t toc:4 \n:t @:t ::t |:t ^:t -:t f:t *:t TeX:t LaTeX:nil 
skip:nil d:nil tags:nil
#+EXPORT_EXCLUDE_TAGS: noexportlatex

* How to use this page						 :noexportlatex:
Here you will find step by step instructions for constructing all the numbers 
we looked at in class. There are also others to demonstrate concepts we do not 
have time to look at in class.
* Concepts
** Standing room and approximating the whole :standing-room:approximating-
whole:
Consult the Introduction in v. 1 for more information on the ideas of 
"standing room" in a class number, "approximating the whole" of the universe 
of a class number, and when you can add on standard subdivisions. *Relevant 
sections are 7.16, 7.18, and 8.9.*



-=-=-LaTeX Output (preamble snipped)-=-=-

\begin{document}

\maketitle

\setcounter{tocdepth}{4}
\tableofcontents

\section{How to use this page}

Here you will find step by step instructions for constructing all the numbers 
we looked at in class. There are also others to demonstrate concepts we do not 
have time to look at in class.
\section{Concepts}

\subsection{Standing room and approximating the whole :standing-
room:approximating-whole:}

Consult the Introduction in v. 1 for more information on the ideas of 
``standing room'' in a class number, ``approximating the whole'' of the 
universe of a class number, and when you can add on standard subdivisions. 
\textbf{Relevant sections are 7.16, 7.18, and 8.9.}

\end{document}

-- 
Kristina M. Spurgin
PhD student - Teaching assistant 
School of Information & Library Science - UNC Chapel Hill 
CB#3360, 100 Manning Hall - Chapel Hill, NC 27599-3360
kristina@infomuse.net - kspurgin@email.unc.edu
http://www.infomuse.net http://blog.infomuse.net aim: infomusings

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Problem with Export-exclude-tags and tags:nil
  2009-07-07  2:37     ` Problem with Export-exclude-tags and tags:nil Kristina M. Spurgin
@ 2009-07-07  4:07       ` Carsten Dominik
  2009-07-07 16:36         ` Kristina M. Spurgin
  0 siblings, 1 reply; 9+ messages in thread
From: Carsten Dominik @ 2009-07-07  4:07 UTC (permalink / raw)
  To: kristina; +Cc: emacs-orgmode

Hi Kristina,

this does work correctly for me, using your test file as it is.

So I would think that you are not using 6.28e but some older version.

What do you get with

    M-x org-version RET

?


If it is not 6.28e, check out


http://orgmode.org/worg/org-faq.php#loaded-old-org


HTH

- Carsten

On Jul 7, 2009, at 4:37 AM, Kristina M. Spurgin wrote:

> Hi,
>
> I've already found and corrected the stupid typo, and that didn't  
> fix this
> problem, so it's time to call for help.
>
> I just downloaded 6.28e last night. I am using GNU Emacs, 22.3.1 on  
> Windows
> XP.
>
> I'm trying to export an org file to LaTeX, and overall it is working  
> ok.
> However, I cannot seem to get the options #+EXPORT_EXCLUDE_TAGS  and
> #+OPTIONS:...tags:nil to work. I've looked around some at org-export- 
> general
> options, and I deleted the only old export setup file I had. I would  
> think that
> options listed in the file would take precedence over those, though.
>
> Below are a truncated version of my org file and then the LaTeX output
> resulting from C-c C-e l. The section with the tag listed in export- 
> exclude is
> in the output. The tag on that section is not in the output,  
> however. My
> understanding of this setting was that it would prevent the tree  
> from export,
> not just the keyword. The tags on other sections are also in the  
> output,
> though I have tags:nil.
>
> #+OPTIONS is all on one line in my file.
>
> For the exclude tags option, I tried:
> :noexportlatex:
> :noexportlatex
> and what you see below.
>
> I did do C-c C-c in each of the options lines after adding them.
>
> I also tried without blank line between top options and #LATEX  
> OPTIONS (I also
> could not get export to ignore options marked with begin/end html  
> block.)
>
> Thanks for any help, and for org-mode in general. I voted. :-)
>
> --Kristina
>
> -=-=-test.org-=-=-
> #+TITLE:     A test page
> #+AUTHOR:    Kristina M. Spurgin
> #+EMAIL:     kristina@infomuse.net
> #+DATE:      2008-11-10 Mon
> #+LANGUAGE:  en
>
> # LATEX OPTIONS
> #+OPTIONS:   H:4 num:t toc:4 \n:t @:t ::t |:t ^:t -:t f:t *:t TeX:t  
> LaTeX:nil
> skip:nil d:nil tags:nil
> #+EXPORT_EXCLUDE_TAGS: noexportlatex
>
> * How to use this page						 :noexportlatex:
> Here you will find step by step instructions for constructing all  
> the numbers
> we looked at in class. There are also others to demonstrate concepts  
> we do not
> have time to look at in class.
> * Concepts
> ** Standing room and approximating the whole :standing- 
> room:approximating-
> whole:
> Consult the Introduction in v. 1 for more information on the ideas of
> "standing room" in a class number, "approximating the whole" of the  
> universe
> of a class number, and when you can add on standard subdivisions.  
> *Relevant
> sections are 7.16, 7.18, and 8.9.*
>
>
>
> -=-=-LaTeX Output (preamble snipped)-=-=-
>
> \begin{document}
>
> \maketitle
>
> \setcounter{tocdepth}{4}
> \tableofcontents
>
> \section{How to use this page}
>
> Here you will find step by step instructions for constructing all  
> the numbers
> we looked at in class. There are also others to demonstrate concepts  
> we do not
> have time to look at in class.
> \section{Concepts}
>
> \subsection{Standing room and approximating the whole :standing-
> room:approximating-whole:}
>
> Consult the Introduction in v. 1 for more information on the ideas of
> ``standing room'' in a class number, ``approximating the whole'' of  
> the
> universe of a class number, and when you can add on standard  
> subdivisions.
> \textbf{Relevant sections are 7.16, 7.18, and 8.9.}
>
> \end{document}
>
> -- 
> Kristina M. Spurgin
> PhD student - Teaching assistant
> School of Information & Library Science - UNC Chapel Hill
> CB#3360, 100 Manning Hall - Chapel Hill, NC 27599-3360
> kristina@infomuse.net - kspurgin@email.unc.edu
> http://www.infomuse.net http://blog.infomuse.net aim: infomusings
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Problem with Export-exclude-tags and tags:nil
  2009-07-07  4:07       ` Carsten Dominik
@ 2009-07-07 16:36         ` Kristina M. Spurgin
  2009-07-08  5:20           ` Carsten Dominik
  0 siblings, 1 reply; 9+ messages in thread
From: Kristina M. Spurgin @ 2009-07-07 16:36 UTC (permalink / raw)
  To: Carsten Dominik; +Cc: emacs-orgmode

Thanks, Carsten.  That was indeed the issue, and it is now working 
perfectly.

Funny, I was looking at the FAQ yesterday, but in the Export section. 
I didn't think to look under Errors because I wasn't getting an error 
to look up. :-)

Thanks a bunch,
Kristina

Carsten Dominik wrote:
> Hi Kristina,
> 
> this does work correctly for me, using your test file as it is.
> 
> So I would think that you are not using 6.28e but some older version.
> 
> What do you get with
> 
>    M-x org-version RET
> 
> ?
> 
> 
> If it is not 6.28e, check out
> 
> 
> http://orgmode.org/worg/org-faq.php#loaded-old-org
> 
> 
> HTH
> 
> - Carsten
> 
> On Jul 7, 2009, at 4:37 AM, Kristina M. Spurgin wrote:
> 
>> Hi,
>>
>> I've already found and corrected the stupid typo, and that didn't fix 
>> this
>> problem, so it's time to call for help.
>>
>> I just downloaded 6.28e last night. I am using GNU Emacs, 22.3.1 on 
>> Windows
>> XP.
>>
>> I'm trying to export an org file to LaTeX, and overall it is working ok.
>> However, I cannot seem to get the options #+EXPORT_EXCLUDE_TAGS  and
>> #+OPTIONS:...tags:nil to work. I've looked around some at 
>> org-export-general
>> options, and I deleted the only old export setup file I had. I would 
>> think that
>> options listed in the file would take precedence over those, though.
>>
>> Below are a truncated version of my org file and then the LaTeX output
>> resulting from C-c C-e l. The section with the tag listed in 
>> export-exclude is
>> in the output. The tag on that section is not in the output, however. My
>> understanding of this setting was that it would prevent the tree from 
>> export,
>> not just the keyword. The tags on other sections are also in the output,
>> though I have tags:nil.
>>
>> #+OPTIONS is all on one line in my file.
>>
>> For the exclude tags option, I tried:
>> :noexportlatex:
>> :noexportlatex
>> and what you see below.
>>
>> I did do C-c C-c in each of the options lines after adding them.
>>
>> I also tried without blank line between top options and #LATEX OPTIONS 
>> (I also
>> could not get export to ignore options marked with begin/end html block.)
>>
>> Thanks for any help, and for org-mode in general. I voted. :-)
>>
>> --Kristina
>>
>> -=-=-test.org-=-=-
>> #+TITLE:     A test page
>> #+AUTHOR:    Kristina M. Spurgin
>> #+EMAIL:     kristina@infomuse.net
>> #+DATE:      2008-11-10 Mon
>> #+LANGUAGE:  en
>>
>> # LATEX OPTIONS
>> #+OPTIONS:   H:4 num:t toc:4 \n:t @:t ::t |:t ^:t -:t f:t *:t TeX:t 
>> LaTeX:nil
>> skip:nil d:nil tags:nil
>> #+EXPORT_EXCLUDE_TAGS: noexportlatex
>>
>> * How to use this page                         :noexportlatex:
>> Here you will find step by step instructions for constructing all the 
>> numbers
>> we looked at in class. There are also others to demonstrate concepts 
>> we do not
>> have time to look at in class.
>> * Concepts
>> ** Standing room and approximating the whole 
>> :standing-room:approximating-
>> whole:
>> Consult the Introduction in v. 1 for more information on the ideas of
>> "standing room" in a class number, "approximating the whole" of the 
>> universe
>> of a class number, and when you can add on standard subdivisions. 
>> *Relevant
>> sections are 7.16, 7.18, and 8.9.*
>>
>>
>>
>> -=-=-LaTeX Output (preamble snipped)-=-=-
>>
>> \begin{document}
>>
>> \maketitle
>>
>> \setcounter{tocdepth}{4}
>> \tableofcontents
>>
>> \section{How to use this page}
>>
>> Here you will find step by step instructions for constructing all the 
>> numbers
>> we looked at in class. There are also others to demonstrate concepts 
>> we do not
>> have time to look at in class.
>> \section{Concepts}
>>
>> \subsection{Standing room and approximating the whole :standing-
>> room:approximating-whole:}
>>
>> Consult the Introduction in v. 1 for more information on the ideas of
>> ``standing room'' in a class number, ``approximating the whole'' of the
>> universe of a class number, and when you can add on standard 
>> subdivisions.
>> \textbf{Relevant sections are 7.16, 7.18, and 8.9.}
>>
>> \end{document}
>>
>> -- 
>> Kristina M. Spurgin
>> PhD student - Teaching assistant
>> School of Information & Library Science - UNC Chapel Hill
>> CB#3360, 100 Manning Hall - Chapel Hill, NC 27599-3360
>> kristina@infomuse.net - kspurgin@email.unc.edu
>> http://www.infomuse.net http://blog.infomuse.net aim: infomusings
>>
>>
>> _______________________________________________
>> Emacs-orgmode mailing list
>> Remember: use `Reply All' to send replies to the list.
>> Emacs-orgmode@gnu.org
>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
> 

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Problem with Export-exclude-tags and tags:nil
  2009-07-07 16:36         ` Kristina M. Spurgin
@ 2009-07-08  5:20           ` Carsten Dominik
  2009-07-08  5:27             ` Bastien
  0 siblings, 1 reply; 9+ messages in thread
From: Carsten Dominik @ 2009-07-08  5:20 UTC (permalink / raw)
  To: kristina; +Cc: emacs-orgmode


On Jul 7, 2009, at 6:36 PM, Kristina M. Spurgin wrote:

> Thanks, Carsten.  That was indeed the issue, and it is now working  
> perfectly.
>
> Funny, I was looking at the FAQ yesterday, but in the Export  
> section. I didn't think to look under Errors because I wasn't  
> getting an error to look up. :-)

You are right, this is confusing, I have change the section title to

"Erros and general problems"

- Carsten

>
> Thanks a bunch,
> Kristina
>
> Carsten Dominik wrote:
>> Hi Kristina,
>> this does work correctly for me, using your test file as it is.
>> So I would think that you are not using 6.28e but some older version.
>> What do you get with
>>   M-x org-version RET
>> ?
>> If it is not 6.28e, check out
>> http://orgmode.org/worg/org-faq.php#loaded-old-org
>> HTH
>> - Carsten
>> On Jul 7, 2009, at 4:37 AM, Kristina M. Spurgin wrote:
>>> Hi,
>>>
>>> I've already found and corrected the stupid typo, and that didn't  
>>> fix this
>>> problem, so it's time to call for help.
>>>
>>> I just downloaded 6.28e last night. I am using GNU Emacs, 22.3.1  
>>> on Windows
>>> XP.
>>>
>>> I'm trying to export an org file to LaTeX, and overall it is  
>>> working ok.
>>> However, I cannot seem to get the options #+EXPORT_EXCLUDE_TAGS  and
>>> #+OPTIONS:...tags:nil to work. I've looked around some at org- 
>>> export-general
>>> options, and I deleted the only old export setup file I had. I  
>>> would think that
>>> options listed in the file would take precedence over those, though.
>>>
>>> Below are a truncated version of my org file and then the LaTeX  
>>> output
>>> resulting from C-c C-e l. The section with the tag listed in  
>>> export-exclude is
>>> in the output. The tag on that section is not in the output,  
>>> however. My
>>> understanding of this setting was that it would prevent the tree  
>>> from export,
>>> not just the keyword. The tags on other sections are also in the  
>>> output,
>>> though I have tags:nil.
>>>
>>> #+OPTIONS is all on one line in my file.
>>>
>>> For the exclude tags option, I tried:
>>> :noexportlatex:
>>> :noexportlatex
>>> and what you see below.
>>>
>>> I did do C-c C-c in each of the options lines after adding them.
>>>
>>> I also tried without blank line between top options and #LATEX  
>>> OPTIONS (I also
>>> could not get export to ignore options marked with begin/end html  
>>> block.)
>>>
>>> Thanks for any help, and for org-mode in general. I voted. :-)
>>>
>>> --Kristina
>>>
>>> -=-=-test.org-=-=-
>>> #+TITLE:     A test page
>>> #+AUTHOR:    Kristina M. Spurgin
>>> #+EMAIL:     kristina@infomuse.net
>>> #+DATE:      2008-11-10 Mon
>>> #+LANGUAGE:  en
>>>
>>> # LATEX OPTIONS
>>> #+OPTIONS:   H:4 num:t toc:4 \n:t @:t ::t |:t ^:t -:t f:t *:t  
>>> TeX:t LaTeX:nil
>>> skip:nil d:nil tags:nil
>>> #+EXPORT_EXCLUDE_TAGS: noexportlatex
>>>
>>> * How to use this page                         :noexportlatex:
>>> Here you will find step by step instructions for constructing all  
>>> the numbers
>>> we looked at in class. There are also others to demonstrate  
>>> concepts we do not
>>> have time to look at in class.
>>> * Concepts
>>> ** Standing room and approximating the whole :standing- 
>>> room:approximating-
>>> whole:
>>> Consult the Introduction in v. 1 for more information on the ideas  
>>> of
>>> "standing room" in a class number, "approximating the whole" of  
>>> the universe
>>> of a class number, and when you can add on standard subdivisions.  
>>> *Relevant
>>> sections are 7.16, 7.18, and 8.9.*
>>>
>>>
>>>
>>> -=-=-LaTeX Output (preamble snipped)-=-=-
>>>
>>> \begin{document}
>>>
>>> \maketitle
>>>
>>> \setcounter{tocdepth}{4}
>>> \tableofcontents
>>>
>>> \section{How to use this page}
>>>
>>> Here you will find step by step instructions for constructing all  
>>> the numbers
>>> we looked at in class. There are also others to demonstrate  
>>> concepts we do not
>>> have time to look at in class.
>>> \section{Concepts}
>>>
>>> \subsection{Standing room and approximating the whole :standing-
>>> room:approximating-whole:}
>>>
>>> Consult the Introduction in v. 1 for more information on the ideas  
>>> of
>>> ``standing room'' in a class number, ``approximating the whole''  
>>> of the
>>> universe of a class number, and when you can add on standard  
>>> subdivisions.
>>> \textbf{Relevant sections are 7.16, 7.18, and 8.9.}
>>>
>>> \end{document}
>>>
>>> -- 
>>> Kristina M. Spurgin
>>> PhD student - Teaching assistant
>>> School of Information & Library Science - UNC Chapel Hill
>>> CB#3360, 100 Manning Hall - Chapel Hill, NC 27599-3360
>>> kristina@infomuse.net - kspurgin@email.unc.edu
>>> http://www.infomuse.net http://blog.infomuse.net aim: infomusings
>>>
>>>
>>> _______________________________________________
>>> Emacs-orgmode mailing list
>>> Remember: use `Reply All' to send replies to the list.
>>> Emacs-orgmode@gnu.org
>>> http://lists.gnu.org/mailman/listinfo/emacs-orgmode

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: Problem with Export-exclude-tags and tags:nil
  2009-07-08  5:20           ` Carsten Dominik
@ 2009-07-08  5:27             ` Bastien
  0 siblings, 0 replies; 9+ messages in thread
From: Bastien @ 2009-07-08  5:27 UTC (permalink / raw)
  To: Carsten Dominik; +Cc: emacs-orgmode

Carsten Dominik <carsten.dominik@gmail.com> writes:

> "Erros and general problems"
    ^  ^

Is that a missing "r" or an additional one?  :)

-- 
 Bastien

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2009-07-08  5:27 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-06-29 15:44 Publishing Projects to Html charles snyder
2009-06-29 16:49 ` Manish
2009-06-30  0:14 ` Bastien
2009-07-06  6:00   ` Bastien
2009-07-07  2:37     ` Problem with Export-exclude-tags and tags:nil Kristina M. Spurgin
2009-07-07  4:07       ` Carsten Dominik
2009-07-07 16:36         ` Kristina M. Spurgin
2009-07-08  5:20           ` Carsten Dominik
2009-07-08  5:27             ` Bastien

Code repositories for project(s) associated with this inbox:

	https://git.savannah.gnu.org/cgit/emacs/org-mode.git

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).