* How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
@ 2014-07-12 0:14 Grant Rettke
2014-07-12 0:28 ` Ken Mankoff
0 siblings, 1 reply; 8+ messages in thread
From: Grant Rettke @ 2014-07-12 0:14 UTC (permalink / raw)
To: emacs-orgmode@gnu.org
Hi,
The ability to use graphviz in an org document is stellar and makes it
so much more productive to use org.
Combined with inline image display, it is a powerhouse combo.
After evaluating my source block, I would like to refresh the generated image.
Thus far, I just call org-display-inline-image.
What is the best way to automate it so that the images are always up to date?
Kind regards,
Grant Rettke | ACM, ASA, FSF, IEEE, SIAM
gcr@wisdomandwonder.com | http://www.wisdomandwonder.com/
“Wisdom begins in wonder.” --Socrates
((λ (x) (x x)) (λ (x) (x x)))
“Life has become immeasurably better since I have been forced to stop
taking it seriously.” --Thompson
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-12 0:14 How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed? Grant Rettke
@ 2014-07-12 0:28 ` Ken Mankoff
2014-07-12 15:23 ` Grant Rettke
2014-07-14 15:26 ` Rick Frankel
0 siblings, 2 replies; 8+ messages in thread
From: Ken Mankoff @ 2014-07-12 0:28 UTC (permalink / raw)
To: Grant Rettke; +Cc: emacs-orgmode@gnu.org
Try (org-redisplay-inline-images). Note "re".
#+BEGIN_SRC <lang> :post (org-redisplay-inline-images)
#+END_SRC
#+RESULTS:
-k.
* On 2014-07-11 at 20:14, Grant Rettke wrote:
> Hi,
>
> The ability to use graphviz in an org document is stellar and makes it
> so much more productive to use org.
>
> Combined with inline image display, it is a powerhouse combo.
>
> After evaluating my source block, I would like to refresh the generated image.
>
> Thus far, I just call org-display-inline-image.
>
> What is the best way to automate it so that the images are always up to date?
>
> Kind regards,
>
> Grant Rettke | ACM, ASA, FSF, IEEE, SIAM
> gcr@wisdomandwonder.com | http://www.wisdomandwonder.com/
> “Wisdom begins in wonder.” --Socrates
> ((λ (x) (x x)) (λ (x) (x x)))
> “Life has become immeasurably better since I have been forced to stop
> taking it seriously.” --Thompson
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-12 0:28 ` Ken Mankoff
@ 2014-07-12 15:23 ` Grant Rettke
2014-07-14 15:26 ` Rick Frankel
1 sibling, 0 replies; 8+ messages in thread
From: Grant Rettke @ 2014-07-12 15:23 UTC (permalink / raw)
To: Ken Mankoff; +Cc: emacs-orgmode@gnu.org
Perfect!
Grant Rettke | ACM, ASA, FSF, IEEE, SIAM
gcr@wisdomandwonder.com | http://www.wisdomandwonder.com/
“Wisdom begins in wonder.” --Socrates
((λ (x) (x x)) (λ (x) (x x)))
“Life has become immeasurably better since I have been forced to stop
taking it seriously.” --Thompson
On Fri, Jul 11, 2014 at 7:28 PM, Ken Mankoff <mankoff@gmail.com> wrote:
>
> Try (org-redisplay-inline-images). Note "re".
>
> #+BEGIN_SRC <lang> :post (org-redisplay-inline-images)
> #+END_SRC
> #+RESULTS:
>
> -k.
>
> * On 2014-07-11 at 20:14, Grant Rettke wrote:
>> Hi,
>>
>> The ability to use graphviz in an org document is stellar and makes it
>> so much more productive to use org.
>>
>> Combined with inline image display, it is a powerhouse combo.
>>
>> After evaluating my source block, I would like to refresh the generated image.
>>
>> Thus far, I just call org-display-inline-image.
>>
>> What is the best way to automate it so that the images are always up to date?
>>
>> Kind regards,
>>
>> Grant Rettke | ACM, ASA, FSF, IEEE, SIAM
>> gcr@wisdomandwonder.com | http://www.wisdomandwonder.com/
>> “Wisdom begins in wonder.” --Socrates
>> ((λ (x) (x x)) (λ (x) (x x)))
>> “Life has become immeasurably better since I have been forced to stop
>> taking it seriously.” --Thompson
>
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-12 0:28 ` Ken Mankoff
2014-07-12 15:23 ` Grant Rettke
@ 2014-07-14 15:26 ` Rick Frankel
2014-07-14 22:10 ` John Kitchin
2014-07-28 15:11 ` Sebastien Vauban
1 sibling, 2 replies; 8+ messages in thread
From: Rick Frankel @ 2014-07-14 15:26 UTC (permalink / raw)
To: Ken Mankoff; +Cc: emacs-orgmode, Grant Rettke
On 2014-07-11 20:28, Ken Mankoff wrote:
> Try (org-redisplay-inline-images). Note "re".
>
> #+BEGIN_SRC <lang> :post (org-redisplay-inline-images)
> #+END_SRC
> #+RESULTS:
I believe it is on WORG somewhere:
#+BEGIN_SRC emacs-lisp
(add-hook 'org-babel-after-execute-hook
(lambda () (org-display-inline-images nil t)))
#+END_SRC
rick
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-14 15:26 ` Rick Frankel
@ 2014-07-14 22:10 ` John Kitchin
2014-07-28 15:11 ` Sebastien Vauban
1 sibling, 0 replies; 8+ messages in thread
From: John Kitchin @ 2014-07-14 22:10 UTC (permalink / raw)
To: Rick Frankel; +Cc: emacs-orgmode, Ken Mankoff, Grant Rettke
That is a nice tip!
--
-----------------------------------
John Kitchin
Professor
Doherty Hall A207F
Department of Chemical Engineering
Carnegie Mellon University
Pittsburgh, PA 15213
412-268-7803
http://kitchingroup.cheme.cmu.edu
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-14 15:26 ` Rick Frankel
2014-07-14 22:10 ` John Kitchin
@ 2014-07-28 15:11 ` Sebastien Vauban
2014-07-28 15:19 ` Bastien
1 sibling, 1 reply; 8+ messages in thread
From: Sebastien Vauban @ 2014-07-28 15:11 UTC (permalink / raw)
To: emacs-orgmode-mXXj517/zsQ
Rick Frankel wrote:
> (add-hook 'org-babel-after-execute-hook
> (lambda () (org-display-inline-images nil t)))
I simply had:
--8<---------------cut here---------------start------------->8---
(add-hook 'org-babel-after-execute-hook
'org-display-inline-images)
--8<---------------cut here---------------end--------------->8---
Anyway, for me, this should clearly be made a *default*, nope?
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-28 15:11 ` Sebastien Vauban
@ 2014-07-28 15:19 ` Bastien
2014-08-04 14:18 ` Sebastien Vauban
0 siblings, 1 reply; 8+ messages in thread
From: Bastien @ 2014-07-28 15:19 UTC (permalink / raw)
To: Sebastien Vauban; +Cc: public-emacs-orgmode-mXXj517/zsQ
Hi Sébastien,
Sebastien Vauban <sva-news-D0wtAvR13HarG/iDocfnWg@public.gmane.org>
writes:
> Rick Frankel wrote:
>> (add-hook 'org-babel-after-execute-hook
>> (lambda () (org-display-inline-images nil t)))
>
> I simply had:
>
> (add-hook 'org-babel-after-execute-hook
> 'org-display-inline-images)
>
> Anyway, for me, this should clearly be made a *default*, nope?
I don't think so, displaying inline images can be perceived as
intrusive, it's good as an option.
--
Bastien
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed?
2014-07-28 15:19 ` Bastien
@ 2014-08-04 14:18 ` Sebastien Vauban
0 siblings, 0 replies; 8+ messages in thread
From: Sebastien Vauban @ 2014-08-04 14:18 UTC (permalink / raw)
To: emacs-orgmode-mXXj517/zsQ
Hello Bastien,
Still far from keeping up with missed postings, because of holiday
time... ;-)
Bastien wrote:
> Sebastien Vauban writes:
>> Rick Frankel wrote:
>>> (add-hook 'org-babel-after-execute-hook
>>> (lambda () (org-display-inline-images nil t)))
>>
>> I simply had:
>>
>> (add-hook 'org-babel-after-execute-hook
>> 'org-display-inline-images)
>>
>> Anyway, for me, this should clearly be made a *default*, nope?
>
> I don't think so, displaying inline images can be perceived as
> intrusive, it's good as an option.
I (can) share your POV regarding having inline images on by default.
But, re-displaying the inline images should still be a default, IMO,
when these are enabled?
Best regards,
Seb
--
Sebastien Vauban
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2014-08-04 14:18 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-07-12 0:14 How to call org-display-inline-images so that after a graphviz block is evaluated the image is refreshed? Grant Rettke
2014-07-12 0:28 ` Ken Mankoff
2014-07-12 15:23 ` Grant Rettke
2014-07-14 15:26 ` Rick Frankel
2014-07-14 22:10 ` John Kitchin
2014-07-28 15:11 ` Sebastien Vauban
2014-07-28 15:19 ` Bastien
2014-08-04 14:18 ` Sebastien Vauban
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).