-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi I would like to use the export to taskjuggler, but somehow I don't get it working - might be me or the fact that I have taskjuggler 3.1.0. I am trying the example on http://orgmode.org/worg/org-tutorials/org-taskjuggler.html but I somehow don't get it to work. My questions are: 1) does the taskjuggler export work with tj3 (version 3.1.0) (John Hendy says it doesn't ("taskjuggler (tj3) export issues and proposals"), but there are patches which should have made it work (e.g. Christian Egli, "small edits to org-taskjuggler.el for tj3"). So: what is the actual status? 2) does the example (url above) work for tj3? 3) if no, could somebody provide a simple example org file which works with tj3? Thanks a lot, Rainer - -- Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany) Centre of Excellence for Invasion Biology Stellenbosch University South Africa Tel : +33 - (0)9 53 10 27 44 Cell: +33 - (0)6 85 62 59 98 Fax : +33 - (0)9 58 10 27 44 Fax (D): +49 - (0)3 21 21 25 22 44 email: Rainer@krugs.de Skype: RMkrug -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk8pAV4ACgkQoYgNqgF2egp0mQCcC6iKvpfYJAxNwKbKadHxfcBN 0SAAoIWxde0BPy2HdSflFQtHOFXYddFw =7GDo -----END PGP SIGNATURE-----
Hello, Rainer M Krug <r.m.krug <at> gmail.com> writes: > > > Hi > > I would like to use the export to taskjuggler, but somehow I don't get > it working - might be me or the fact that I have taskjuggler 3.1.0. > > I am trying the example on > > http://orgmode.org/worg/org-tutorials/org-taskjuggler.html > > but I somehow don't get it to work. > I tried to make this example work with tj3 some time ago but I didn't manage to make it work with the current taskjuggler export procedure. It seems that the instruction change a lot beetween tj2 and tj3 and as far I understand the export function was written for tj2. > My questions are: > > 1) does the taskjuggler export work with tj3 (version 3.1.0) (John > Hendy says it doesn't ("taskjuggler (tj3) export issues and > proposals"), but there are patches which should have made it work > (e.g. Christian Egli, "small edits to org-taskjuggler.el for tj3"). > So: what is the actual status? > I put here the link where you can see the change. Indeed it works with the change proposed by this patch. http://thread.gmane.org/gmane.emacs.orgmode/40550 This change is apparently not implemented in the current org-taskjuggler.el file.
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/02/12 13:25, d.tchin wrote: > Hello, > > Rainer M Krug <r.m.krug <at> gmail.com> writes: > >> >> >> Hi >> >> I would like to use the export to taskjuggler, but somehow I >> don't get it working - might be me or the fact that I have >> taskjuggler 3.1.0. >> >> I am trying the example on >> >> http://orgmode.org/worg/org-tutorials/org-taskjuggler.html >> >> but I somehow don't get it to work. >> > > I tried to make this example work with tj3 some time ago but I > didn't manage to make it work with the current taskjuggler export > procedure. It seems that the instruction change a lot beetween tj2 > and tj3 and as far I understand the export function was written for > tj2. Yes - that is my understanding and experience so far as well. > >> My questions are: >> >> 1) does the taskjuggler export work with tj3 (version 3.1.0) >> (John Hendy says it doesn't ("taskjuggler (tj3) export issues >> and proposals"), but there are patches which should have made it >> work (e.g. Christian Egli, "small edits to org-taskjuggler.el for >> tj3"). So: what is the actual status? >> > > I put here the link where you can see the change. Indeed it works > with the change proposed by this patch. > http://thread.gmane.org/gmane.emacs.orgmode/40550 > > This change is apparently not implemented in the current > org-taskjuggler.el file. Oversight? Is somebody looking at enabling export for tj3? Or is there a way that I can install tj2 on Ubuntu Oneiric? Cheers, Rainer > > > > - -- Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany) Centre of Excellence for Invasion Biology Stellenbosch University South Africa Tel : +33 - (0)9 53 10 27 44 Cell: +33 - (0)6 85 62 59 98 Fax : +33 - (0)9 58 10 27 44 Fax (D): +49 - (0)3 21 21 25 22 44 email: Rainer@krugs.de Skype: RMkrug -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk8pNmcACgkQoYgNqgF2egoNwACfTZiTCBFiwsseIyOTQkKo5V4q vCcAn0rynuwgaWaWG4qTbqRIiKfdykVS =gFJ9 -----END PGP SIGNATURE-----
On Wed, Feb 1, 2012 at 6:25 AM, d.tchin <d.tchin@voila.fr> wrote: > Hello, > > Rainer M Krug <r.m.krug <at> gmail.com> writes: [...] >> >> 1) does the taskjuggler export work with tj3 (version 3.1.0) (John >> Hendy says it doesn't ("taskjuggler (tj3) export issues and >> proposals"), but there are patches which should have made it work >> (e.g. Christian Egli, "small edits to org-taskjuggler.el for tj3"). >> So: what is the actual status? >> > > I put here the link where you can see the change. > Indeed it works with the change proposed by this patch. > http://thread.gmane.org/gmane.emacs.orgmode/40550 > I just tried to apply that patch and get: --- $ patch -p1 < ../tj3.patch patching file org-taskjuggler.el patch: **** malformed patch at line 9: completed, chart --- Not sure what's wrong. Even so, see my most recent thread (http://www.mail-archive.com/emacs-orgmode@gnu.org/msg51502.html). Even if that patch works, it's not a viable solution. It sets a "default" value, but this is really *the* value as in there's no way to override it from the file. If you want a different export format, you have to edit your emacs config. The variable should be called 'org-taskjuggler-export-report'. I think the ability to include a .tji file is the way to go. Write your report definition, add =include "reports.tji"= to the exporter and you're all set. John > This change is apparently not implemented in the current org-taskjuggler.el > file. >
On Wed, Feb 1, 2012 at 6:56 AM, Rainer M Krug <r.m.krug@gmail.com> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > On 01/02/12 13:25, d.tchin wrote: >> Hello, >> >> Rainer M Krug <r.m.krug <at> gmail.com> writes: [...] > > Oversight? Is somebody looking at enabling export for tj3? Or is there > a way that I can install tj2 on Ubuntu Oneiric? > If you can bear an extra step, set 'org-export-taskjuggler-default-reports' to nothing (or just comment out the defaults with a preceding "#" for safekeeping). Add your report definitions into a file called "reports.tji" (yes, it seems to have to be "reports.tji" and nothing-else.tji). Then export from the org file, open up the generated .tjp and add =include "reports.tji"= as the last line. Should work like a charm. Try the tutorial report from the taskjuggler documentation perhaps as a test? It worked for me. John
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 01/02/12 14:50, John Hendy wrote: > On Wed, Feb 1, 2012 at 6:56 AM, Rainer M Krug <r.m.krug@gmail.com> > wrote: >> -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 >> >> On 01/02/12 13:25, d.tchin wrote: >>> Hello, >>> >>> Rainer M Krug <r.m.krug <at> gmail.com> writes: > > [...] > >> >> Oversight? Is somebody looking at enabling export for tj3? Or is >> there a way that I can install tj2 on Ubuntu Oneiric? >> > > If you can bear an extra step, set > 'org-export-taskjuggler-default-reports' to nothing (or just > comment out the defaults with a preceding "#" for safekeeping). Add > your report definitions into a file called "reports.tji" (yes, it > seems to have to be "reports.tji" and nothing-else.tji). Then > export from the org file, open up the generated .tjp and add > =include "reports.tji"= as the last line. Should work like a > charm. Sounds like an option, but definitely not one I would prefer. I'll wait and see what happens. I'll come back to your suggestion if 'll use it anyway. > > Try the tutorial report from the taskjuggler documentation perhaps > as a test? It worked for me. I'll do. Thanks a lot, Rainer > > > John - -- Rainer M. Krug, PhD (Conservation Ecology, SUN), MSc (Conservation Biology, UCT), Dipl. Phys. (Germany) Centre of Excellence for Invasion Biology Stellenbosch University South Africa Tel : +33 - (0)9 53 10 27 44 Cell: +33 - (0)6 85 62 59 98 Fax : +33 - (0)9 58 10 27 44 Fax (D): +49 - (0)3 21 21 25 22 44 email: Rainer@krugs.de Skype: RMkrug -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAk8pREkACgkQoYgNqgF2egoncgCaA1bIq98jlbS1nTVvyA5fcm8V c+cAnjfMTc6ikQIEbJW5g/dk5pTzvFAC =Hs7b -----END PGP SIGNATURE-----
Hi Rainer Rainer M Krug <r.m.krug@gmail.com> writes: > I would like to use the export to taskjuggler, but somehow I don't get > it working - might be me or the fact that I have taskjuggler 3.1.0. > > I am trying the example on > > http://orgmode.org/worg/org-tutorials/org-taskjuggler.html > > but I somehow don't get it to work. Export to a file which can be consumed by tj3 should work. Opening the exported file with tj2 silently fails if you do not have tj2 installed. What exactly isn't working? > My questions are: > > 1) does the taskjuggler export work with tj3 (version 3.1.0) (John > Hendy says it doesn't ("taskjuggler (tj3) export issues and > proposals"), but there are patches which should have made it work > (e.g. Christian Egli, "small edits to org-taskjuggler.el for tj3"). > So: what is the actual status? As I said, export to tj3 should work. See also my resonse to John Hendy. > 2) does the example (url above) work for tj3? The example file should work. Set org-export-taskjuggler-target-version to 3 and set the org-export-taskjuggler-default-reports to something that tj3 understands. Export to tj3 should be done using C-c C-e j (org-export-taskjuggler), as C-c C-e J silently fails if you don't have TaskJugglerUI (aka tj2.4) installed. On the resulting tjp file run tj3 and open the result in a browser. > 3) if no, could somebody provide a simple example org file which works > with tj3? The example file works if I follow the steps above. Let me know if you have any problems. Thanks Christian -- Christian Egli Swiss Library for the Blind, Visually Impaired and Print Disabled Grubenstrasse 12, CH-8045 Zürich, Switzerland
John Hendy <jw.hendy <at> gmail.com> writes: > > On Wed, Feb 1, 2012 at 6:25 AM, d.tchin <d.tchin <at> voila.fr> wrote: > > Hello, > > > > Rainer M Krug <r.m.krug <at> gmail.com> writes: > > > Even so, see my most recent thread > (http://www.mail-archive.com/emacs-orgmode <at> gnu.org/msg51502.html). > Even if that patch works, it's not a viable solution. It sets a > "default" value, but this is really *the* value as in there's no way > to override it from the file. If you want a different export format, > you have to edit your emacs config. The variable should be called > 'org-taskjuggler-export-report'. I think the ability to include a .tji > file is the way to go. Write your report definition, add =include > "reports.tji"= to the exporter and you're all set. Thank you for the suggestion and for the link to thread. After several trials and make it work. As far I understand the tj2 is not maintained anymore and if users want to use the taskjuggler they will obtain tj3 version. Maybe this configuration should be described in the info file or perhaps in the tutorial. > > John > > > This change is apparently not implemented in the current org-taskjuggler.el > > file. > > > > Thanks for the help and I would to thank people who invest their time and skill to develop orgmode and all these extensions. Regards
On Wed, Feb 1, 2012 at 1:48 PM, d.tchin <d.tchin@voila.fr> wrote: > John Hendy <jw.hendy <at> gmail.com> writes: > >> >> On Wed, Feb 1, 2012 at 6:25 AM, d.tchin <d.tchin <at> voila.fr> wrote: >> > Hello, >> > >> > Rainer M Krug <r.m.krug <at> gmail.com> writes: >> >> >> Even so, see my most recent thread >> (http://www.mail-archive.com/emacs-orgmode <at> gnu.org/msg51502.html). >> Even if that patch works, it's not a viable solution. It sets a >> "default" value, but this is really *the* value as in there's no way >> to override it from the file. If you want a different export format, >> you have to edit your emacs config. The variable should be called >> 'org-taskjuggler-export-report'. I think the ability to include a .tji >> file is the way to go. Write your report definition, add =include >> "reports.tji"= to the exporter and you're all set. > > Thank you for the suggestion and for the link to thread. After several trials > and make it work. As far I understand the tj2 is not maintained anymore and if > users want to use the taskjuggler they will obtain tj3 version. Maybe this > configuration should be described in the info file or perhaps in the tutorial. > Glad you got it working. I'm planning to look into updating the manual/worg (hopefully in return for someone with lisp knowledge to tweak some things just a smidge) :) John >> >> John >> >> > This change is apparently not implemented in the current org-taskjuggler.el >> > file. >> > >> >> > > > Thanks for the help and I would to thank people who invest their time and > skill to develop orgmode and all these extensions. > > Regards > > >