From: Bernt Hansen <bernt@norang.ca>
To: emacs-orgmode@gnu.org
Subject: Org-mode version 6.32trans (release_6.32b.122.g41496); Error on clock in when over estimated time
Date: Fri, 6 Nov 2009 12:04:25 -0500 [thread overview]
Message-ID: <200911061704.nA6H4PDI015603@gollum.intra.norang.ca> (raw)
Remember to cover the basics, that is, what you expected to happen and
what in fact did happen. You don't know how to make a good report? See
http://orgmode.org/manual/Feedback.html#Feedback
Your bug report will be posted to the Org-mode mailing list.
------------------------------------------------------------------------
I'm almost done my September accounting (yay!) and it's gone over the
estimated clock time. Attempting to clock in this task again triggers
the following error - but the clock does start.
Generating the 'Task blah should be finished by now' is what fails.
This task has a token to show both count and %complete.
Debugger entered--Lisp error: (error "Not enough arguments for format string")
message(#("Task 'September Accounting [16/17] [94%]' should be finished by now. (0:30)" 0 6 nil 6 40 (face nil fontified nil org-category "norang" :org-clock-minutes 44) 40 75 nil))
(cond ((functionp org-show-notification-handler) (funcall org-show-notification-handler notification)) ((stringp org-show-notification-handler) (start-process "emacs-timer-notification" nil org-show-notification-handler notification)) ((org-program-exists "notify-send") (start-process "emacs-timer-notification" nil "notify-send" notification)) (t (message notification)))
org-show-notification(#("Task 'September Accounting [16/17] [94%]' should be finished by now. (0:30)" 0 6 nil 6 40 (:org-clock-minutes 44 org-category "norang" fontified nil face nil) 40 75 nil))
org-notify(#("Task 'September Accounting [16/17] [94%]' should be finished by now. (0:30)" 0 6 nil 6 40 (:org-clock-minutes 44 org-category "norang" fontified nil face nil) 40 75 nil) t)
(if org-clock-notification-was-shown nil (setq org-clock-notification-was-shown t) (org-notify (format "Task '%s' should be finished by now. (%s)" org-clock-heading org-clock-effort) t))
(unless org-clock-notification-was-shown (setq org-clock-notification-was-shown t) (org-notify (format "Task '%s' should be finished by now. (%s)" org-clock-heading org-clock-effort) t))
(if (>= clocked-time effort-in-minutes) (unless org-clock-notification-was-shown (setq org-clock-notification-was-shown t) (org-notify ... t)) (setq org-clock-notification-was-shown nil))
(let ((effort-in-minutes ...) (clocked-time ...)) (if (>= clocked-time effort-in-minutes) (unless org-clock-notification-was-shown ... ...) (setq org-clock-notification-was-shown nil)))
(progn (let (... ...) (if ... ... ...)))
(if (marker-buffer org-clock-marker) (progn (let ... ...)))
(when (marker-buffer org-clock-marker) (let (... ...) (if ... ... ...)))
org-clock-notify-once-if-expired()
(if org-clock-effort (org-clock-notify-once-if-expired))
org-clock-update-mode-line()
(save-restriction (widen) (goto-char target-pos) (org-back-to-heading t) (or interrupting (move-marker org-clock-interrupted-task nil)) (org-clock-history-push) (cond (... ... ...) (... ...)) (setq org-clock-heading-for-remember (and ... ... ...)) (setq org-clock-heading (cond ... ... ...)) (setq org-clock-heading (org-propertize org-clock-heading ... nil)) (org-clock-find-position org-clock-in-resume) (cond (... ... ... ... ... ... ...) (... ... ... ... ...) (t ... ... ... ... ... ... ... ... ...)) (move-marker org-clock-marker (point) (buffer-base-buffer)) (move-marker org-clock-hd-marker (save-excursion ... ...) (buffer-base-buffer)) (setq org-clock-has-been-used t) (or global-mode-string (setq global-mode-string ...)) (or (memq ... global-mode-string) (setq global-mode-string ...)) (
org-clock-update-mode-line) (when org-clock-mode-line-timer (cancel-timer org-clock-mode-line-timer) (setq org-clock-mode-line-timer nil)) (setq org-clock-mode-line-timer (run-with-timer 60 60 ...)) (when org-clock-idle-timer (cancel-timer org-clock-idle-timer) (setq org-clock-idle-timer nil)) (setq org-clock-idle-timer (run-with-timer 60 60 ...)) (message "Clock starts at %s - %s" ts msg-extra) (run-hooks (quote org-clock-in-hook)))
(save-excursion (save-restriction (widen) (goto-char target-pos) (org-back-to-heading t) (or interrupting ...) (org-clock-history-push) (cond ... ...) (setq org-clock-heading-for-remember ...) (setq org-clock-heading ...) (setq org-clock-heading ...) (org-clock-find-position org-clock-in-resume) (cond ... ... ...) (move-marker org-clock-marker ... ...) (move-marker org-clock-hd-marker ... ...) (setq org-clock-has-been-used t) (or global-mode-string ...) (or ... ...) (org-clock-update-mode-line) (when org-clock-mode-line-timer ... ...) (setq org-clock-mode-line-timer ...) (when org-clock-idle-timer ... ...) (setq org-clock-idle-timer ...) (message "Clock starts at %s - %s" ts msg-extra) (run-hooks ...)))
(save-excursion (when (and selected-task ...) (set-buffer ...) (setq target-pos ...) (move-marker selected-task nil)) (save-excursion (save-restriction ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ... ...)))
(let ((interrupting ...) ts selected-task target-pos (msg-extra "") (left-over ...)) (when (and org-clock-auto-clock-resolution ... ... ...) (setq org-clock-left-over-time nil) (let ... ...)) (when (equal select ...) (setq selected-task ...) (if selected-task ... ...)) (when interrupting (move-marker org-clock-interrupted-task ... ...) (org-clock-out t)) (when (equal select ...) (org-clock-mark-default-task)) (setq target-pos (if ... ... ...)) (run-hooks (quote org-clock-in-prepare-hook)) (save-excursion (when ... ... ... ...) (save-excursion ...)))
(catch (quote abort) (let (... ts selected-task target-pos ... ...) (when ... ... ...) (when ... ... ...) (when interrupting ... ...) (when ... ...) (setq target-pos ...) (run-hooks ...) (save-excursion ... ...)))
org-clock-in(nil)
(save-current-buffer (set-buffer (marker-buffer marker)) (widen) (goto-char pos) (org-show-context (quote agenda)) (org-show-entry) (org-cycle-hide-drawers (quote children)) (org-clock-in arg) (setq newhead (org-get-heading)))
(with-current-buffer (marker-buffer marker) (widen) (goto-char pos) (org-show-context (quote agenda)) (org-show-entry) (org-cycle-hide-drawers (quote children)) (org-clock-in arg) (setq newhead (org-get-heading)))
(let ((_cline ...) (_cmd this-command) (_buf1 ...) (_buf2 ...) (_undo1 buffer-undo-list) (_undo2 ...) _c1 _c2) (with-current-buffer (marker-buffer marker) (widen) (goto-char pos) (org-show-context ...) (org-show-entry) (org-cycle-hide-drawers ...) (org-clock-in arg) (setq newhead ...)) (org-agenda-change-all-lines newhead hdmarker) (when org-agenda-allow-remote-undo (setq _c1 ... _c2 ...) (when ... ... ... ...)))
(org-with-remote-undo (marker-buffer marker) (with-current-buffer (marker-buffer marker) (widen) (goto-char pos) (org-show-context ...) (org-show-entry) (org-cycle-hide-drawers ...) (org-clock-in arg) (setq newhead ...)) (org-agenda-change-all-lines newhead hdmarker))
(let* ((marker ...) (hdmarker ...) (pos ...) newhead) (org-with-remote-undo (marker-buffer marker) (with-current-buffer ... ... ... ... ... ... ... ...) (org-agenda-change-all-lines newhead hdmarker)))
(if (equal arg (quote ...)) (org-clock-in arg) (let* (... ... ... newhead) (org-with-remote-undo ... ... ...)))
org-agenda-clock-in(nil)
call-interactively(org-agenda-clock-in)
Emacs : GNU Emacs 22.2.1 (i486-pc-linux-gnu, GTK+ Version 2.12.11)
of 2008-11-09 on raven, modified by Debian
Package: Org-mode version 6.32trans (release_6.32b.122.g41496)
-Bernt
next reply other threads:[~2009-11-06 17:04 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-06 17:04 Bernt Hansen [this message]
2009-11-09 21:09 ` Org-mode version 6.32trans (release_6.32b.122.g41496); Error on clock in when over estimated time Carsten Dominik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
List information: https://www.orgmode.org/
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200911061704.nA6H4PDI015603@gollum.intra.norang.ca \
--to=bernt@norang.ca \
--cc=emacs-orgmode@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).