* (no subject)
@ 2006-05-25 10:43 Thomas Baumann
2006-05-25 12:49 ` Carsten Dominik
0 siblings, 1 reply; 95+ messages in thread
From: Thomas Baumann @ 2006-05-25 10:43 UTC (permalink / raw)
To: emacs-orgmode
Hi Carsten,
I guess org-publish should either be integrated into org-el or committed
to emacs-cvs because otherwise the menu entries related to publishing
will fail.
Thomas
following the lively development with great interest but with too little
time to test all new features :-)
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2006-05-25 10:43 Thomas Baumann
@ 2006-05-25 12:49 ` Carsten Dominik
0 siblings, 0 replies; 95+ messages in thread
From: Carsten Dominik @ 2006-05-25 12:49 UTC (permalink / raw)
To: thomas.baumann; +Cc: emacs-orgmode
David has started the process of transferring his copyright to the FSF.
Once that is complete we will hopefully be able to quickly install
this file in Emacs.
- Carsten
On May 25, 2006, at 12:43, Thomas Baumann wrote:
> Hi Carsten,
>
> I guess org-publish should either be integrated into org-el or
> committed
> to emacs-cvs because otherwise the menu entries related to publishing
> will fail.
>
> Thomas
>
> following the lively development with great interest but with too
> little
> time to test all new features :-)
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
>
>
--
Carsten Dominik
Sterrenkundig Instituut "Anton Pannekoek"
Universiteit van Amsterdam
Kruislaan 403
NL-1098SJ Amsterdam
phone: +31 20 525 7477
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2007-10-20 10:33 Kevin Brubeck Unhammer
2007-10-21 22:20 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Kevin Brubeck Unhammer @ 2007-10-20 10:33 UTC (permalink / raw)
To: dominik; +Cc: emacs-orgmode
Carsten Dominik <dominik@science.uva.nl> writes:
> - The agenda dispatcher
> + `<' cycles through restriction states.
Is there still a reason for the agenda timeline ("L") having to be
restricted to the current buffer?
--
Kevin Brubeck Unhammer
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2007-10-20 10:33 Kevin Brubeck Unhammer
@ 2007-10-21 22:20 ` Bastien
0 siblings, 0 replies; 95+ messages in thread
From: Bastien @ 2007-10-21 22:20 UTC (permalink / raw)
To: emacs-orgmode
"Kevin Brubeck Unhammer" <unhammer@gmail.com> writes:
> Carsten Dominik <dominik@science.uva.nl> writes:
>
>> - The agenda dispatcher
>> + `<' cycles through restriction states.
>
> Is there still a reason for the agenda timeline ("L") having to be
> restricted to the current buffer?
Please check these threads:
http://search.gmane.org/?query=timeline+all+agenda-files&group=gmane.emacs.orgmode
From the manual:
The timeline summarizes all time-stamped items from a single Org-mode
file in a _time-sorted view_. The main purpose of this command is to
give an overview over events in a project.
You can still create your own agenda view displaying the agenda for any
number of days by using `org-agenda-ndays':
(setq org-agenda-custom-commands
'(("n" agenda ""
((org-agenda-ndays 100)))))
But this can take longer than displaying the timeline for just one file.
HTH,
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2007-11-13 20:35 François Puitg
0 siblings, 0 replies; 95+ messages in thread
From: François Puitg @ 2007-11-13 20:35 UTC (permalink / raw)
To: emacs-orgmode; +Cc: tim.ocallaghan, Dr.Volker.Zell
Subject: Re: [Orgmode] undo in org.el
In-Reply-To: <200711131703.lADH3ive000962@imag.imag.fr>
References: <200711131703.lADH3ive000962@imag.imag.fr>
X-Mailer: VM 7.19 under 21.4 (patch 20) "Double Solitaire" XEmacs Lucid--text follows this line--
FCC: ~/Mail/messages_envoyés
> Well, the fact that it is in Emacs CVS has not kept me from
> supporting XEmacs for quite a while now. But it is extra work and
> requires catering for missing features and different implementations
> - so it is important for me to know that this is used and still
> appreciated.
>
> How about someone stepping forward and trying to release an XEmacs
> package containing noutline.el and org-mode? Anyone who feels up to
> this? Because I will not have the time.
>
> - Carsten
I'm another (happy) user of XEmacs, and a (not less happy) user of
org-mode.
I don't think I could maintain an XEmacs package for org-mode (not
only a question of time, but also capability), but I'm willing to help
by testing org-mode under XEmacs and tracking down bugs.
-- Frnçs
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2008-01-28 11:20 Dimitris Kapetanakis
2008-01-29 9:39 ` Bastien Guerry
0 siblings, 1 reply; 95+ messages in thread
From: Dimitris Kapetanakis @ 2008-01-28 11:20 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1.1: Type: text/plain, Size: 330 bytes --]
This is really a question for Bastien
I tried to use blorg.el but I can't load it
it says
Compiling file g:/Emacs/site-lisp/blorg.el at Mon Jan 28 13:17:20 2008
blorg.el:133:1:Warning: value returned from (fboundp (quote
replace-regexp-in-string)) is unused
blorg.el:1405:1:Error: Invalid read syntax: "?"
can you help me?
[-- Attachment #1.2: Type: text/html, Size: 396 bytes --]
[-- Attachment #2: Type: text/plain, Size: 204 bytes --]
_______________________________________________
Emacs-orgmode mailing list
Remember: use `Reply All' to send replies to the list.
Emacs-orgmode@gnu.org
http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2008-01-28 11:20 Dimitris Kapetanakis
@ 2008-01-29 9:39 ` Bastien Guerry
0 siblings, 0 replies; 95+ messages in thread
From: Bastien Guerry @ 2008-01-29 9:39 UTC (permalink / raw)
To: Dimitris Kapetanakis; +Cc: emacs-orgmode
Hi Dimitri,
"Dimitris Kapetanakis" <katepano@gmail.com> writes:
> This is really a question for Bastien
> I tried to use blorg.el but I can't load it
>
> it says
>
> Compiling file g:/Emacs/site-lisp/blorg.el at Mon Jan 28 13:17:20 2008
> blorg.el:133:1:Warning: value returned from (fboundp (quote
> replace-regexp-in-string)) is unused
> blorg.el:1405:1:Error: Invalid read syntax: "?"
>
> can you help me?
I've uploaded a small fix for this. Please check blorg.el 0.75b:
http://www.cogintion.ens.fr/~guerry/u/blorg.el
HTH,
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2009-02-17 18:57 Matthew Lundin
2009-02-17 20:26 ` Carsten Dominik
0 siblings, 1 reply; 95+ messages in thread
From: Matthew Lundin @ 2009-02-17 18:57 UTC (permalink / raw)
To: emacs-orgmode
Hi everyone,
With one of the recent updates to org (not sure which one), I started to
have some formatting issues with numbers in html headlines when
exporting from org.
Let's take the following org file:
--8<---------------cut here---------------start------------->8---
#+TITLE: Test
* Headline One
** Subheading One
--8<---------------cut here---------------end--------------->8---
The headline and subheading export to html as:
,----
| <div id="outline-container-1" class="outline-2">
| <h2 id="sec-1"><span class="section-number-2"> 1</span>Headline One </h2>
| <div class="outline-text-2" id="text-1">
|
|
| </div>
|
| <div id="outline-container-1.1" class="outline-3">
| <h3 id="sec-1.1"><span class="section-number-3"> 1.1</span>Subheading One </h3>
`----
Which appears as:
,----
| 1Headline One
|
| 1.1Subheading One
`----
In other words, a space is missing in the exported html.
Thanks,
Matt
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2009-02-17 18:57 Matthew Lundin
@ 2009-02-17 20:26 ` Carsten Dominik
0 siblings, 0 replies; 95+ messages in thread
From: Carsten Dominik @ 2009-02-17 20:26 UTC (permalink / raw)
To: Matthew Lundin; +Cc: emacs-orgmode
Fixed, thanks.
- Carsten
On Feb 17, 2009, at 7:57 PM, Matthew Lundin wrote:
> Hi everyone,
>
> With one of the recent updates to org (not sure which one), I
> started to
> have some formatting issues with numbers in html headlines when
> exporting from org.
>
> Let's take the following org file:
>
> --8<---------------cut here---------------start------------->8---
> #+TITLE: Test
>
> * Headline One
> ** Subheading One
> --8<---------------cut here---------------end--------------->8---
>
> The headline and subheading export to html as:
>
> ,----
> | <div id="outline-container-1" class="outline-2">
> | <h2 id="sec-1"><span class="section-number-2"> 1</span>Headline
> One </h2>
> | <div class="outline-text-2" id="text-1">
> |
> |
> | </div>
> |
> | <div id="outline-container-1.1" class="outline-3">
> | <h3 id="sec-1.1"><span class="section-number-3"> 1.1</
> span>Subheading One </h3>
> `----
>
> Which appears as:
>
> ,----
> | 1Headline One
> |
> | 1.1Subheading One
> `----
>
> In other words, a space is missing in the exported html.
>
> Thanks,
> Matt
>
>
> _______________________________________________
> Emacs-orgmode mailing list
> Remember: use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2009-09-18 12:35 Robin Green
0 siblings, 0 replies; 95+ messages in thread
From: Robin Green @ 2009-09-18 12:35 UTC (permalink / raw)
To: emacs-orgmode
Is there any equivalent to planner-mode's planner-rank.el for org-mode? I want to automatically compute some sort of combined measure of urgency and importance for each of my TODOs, and rank them according to this measure. (Of course, I could write my own code to do this, and I might do just that if there isn't anything suitable already out there.)
--
Robin
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2010-06-29 17:50 amscopub-mail
0 siblings, 0 replies; 95+ messages in thread
From: amscopub-mail @ 2010-06-29 17:50 UTC (permalink / raw)
To: emacs-orgmode
The following latex options produce the right format (an article scaled up to 20pts using the "arev" font):
#+LaTeX_CLASS: article
#+LaTeX_CLASS_OPTIONS: [12pt]
#+LATEX_HEADER: \usepackage{amsmath,amsthm,amssymb} \usepackage[T1]{fontenc} \usepackage[20pt]{extsizes} \usepackage{arev} \usepackage[utf8]{inputenc}
However, when I export to HTML, the math equations fail to export. And yes, I set the right variable for exporting latex snippets in HTML.
Ideas? The culprit seems to be the arev package. Export works fine if I remove that. However, why would that cause a problem?
Using org-mode 6.36
--
--Thanks!
U.
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2011-02-21 22:13 Vincent-Xavier JUMEL
2011-02-23 19:52 ` Bernt Hansen
2011-02-23 19:54 ` Bernt Hansen
0 siblings, 2 replies; 95+ messages in thread
From: Vincent-Xavier JUMEL @ 2011-02-21 22:13 UTC (permalink / raw)
To: emacs-orgmode
From: Vincent-Xavier JUMEL <endymion@tauceticentral.i-did-not-set--mail-host-address--so-tickle-me>
To: emacs-orgmode@gnu.org
Subject: Bug: Bug in agenda on DEADLINE/SCHEDULE with -3d [7.4]
Date: Mon, 21 Feb 2011 23:13:32 +0100
Message-ID: <87d3mlyr1v.fsf@tauceticentral.i-did-not-set--mail-host-address--so-tickle-me>
MIME-Version: 1.0
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: quoted-printable
An entry with a SCHEDULE or a DEADLINE using the <date -%d[dwm]> doesn't
produce the documented behavior. Anyone does have the same issue ?
----
Emacs : GNU Emacs 23.2.1 (i686-pc-linux-gnu, GTK+ Version 2.21.6)
of 2010-09-01 on rhenium, modified by Debian
Package: Org-mode version 7.4
current state:
=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
(setq
org-export-latex-after-initial-vars-hook '(org-beamer-after-initial-vars)
org-speed-command-hook '(org-speed-command-default-hook
org-babel-speed-command-hook)
org-agenda-files '("~/org/parinux.org")
org-blocker-hook '(org-block-todo-from-checkboxes)
org-metaup-hook '(org-babel-load-in-session-maybe)
org-capture-templates '(("a" "Ajoute un atelier" entry
(file+headline "~/org/parinux.org"
"Premier Samedi")
(file
"~/.emacs.d/org/templates/atelier_parinux.tpl")
)
("c" "Ajoute une conf=C3=A9rence" entry
(file+headline "~/org/parinux.org"
"Conf=C3=A9rences")
(file
"~/.emacs.d/org/templates/conference_parinux.tpl=
")
)
("v" "Ajoute un vote" entry
(file+headline "~/org/parinux.org"
"Votes")
(file
"~/.emacs.d/org/templates/vote_parinux_ca_2011.t=
pl")
)
)
org-after-todo-state-change-hook '(org-clock-out-if-current)
org-startup-folded 'content
org-export-blocks-postblock-hook '(org-exp-res/src-name-cleanup)
org-export-latex-format-toc-function 'org-export-latex-format-toc-default
org-tab-first-hook '(org-hide-block-toggle-maybe
org-src-native-tab-command-maybe
org-babel-hide-result-toggle-maybe)
org-src-mode-hook '(org-src-babel-configure-edit-buffer
org-src-mode-configure-edit-buffer)
org-confirm-shell-link-function 'yes-or-no-p
org-export-first-hook '(org-beamer-initialize-open-trackers)
org-agenda-before-write-hook '(org-agenda-add-entry-text)
org-default-notes-file "~/org/notes"
org-babel-pre-tangle-hook '(save-buffer)
org-cycle-hook '(org-cycle-hide-archived-subtrees
org-cycle-hide-drawers org-cycle-show-empty-lines
org-optimize-window-after-visibility-change)
org-export-preprocess-before-normalizing-links-hook '(org-remove-file-link=
-modifiers)
org-mode-hook '(#[nil "\300\301\302\303\304$\207"
[org-add-hook change-major-mode-hook
org-show-block-all append local]
5]
#[nil "\300\301\302\303\304$\207"
[org-add-hook change-major-mode-hook
org-babel-show-result-all append local]
5]
org-babel-result-hide-spec
org-babel-hide-all-hashes)
org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
org-babel-execute-safely-maybe)
org-confirm-elisp-link-function 'yes-or-no-p
org-export-interblocks '((lob org-babel-exp-lob-one-liners)
(src org-babel-exp-inline-src-blocks))
org-occur-hook '(org-first-headline-recenter)
org-export-preprocess-before-selecting-backend-code-hook '(org-beamer-sele=
ct-beamer-code)
org-export-latex-final-hook '(org-beamer-amend-header
org-beamer-fix-toc
org-beamer-auto-fragile-frames
org-beamer-place-default-actions-for-lists)
org-enforce-todo-checkbox-dependencies t
org-metadown-hook '(org-babel-pop-to-session-maybe)
org-export-blocks '((src org-babel-exp-src-blocks nil)
(comment org-export-blocks-format-comment t)
(ditaa org-export-blocks-format-ditaa nil)
(dot org-export-blocks-format-dot nil))
)
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2011-02-21 22:13 Vincent-Xavier JUMEL
@ 2011-02-23 19:52 ` Bernt Hansen
2011-02-23 19:54 ` Bernt Hansen
1 sibling, 0 replies; 95+ messages in thread
From: Bernt Hansen @ 2011-02-23 19:52 UTC (permalink / raw)
To: Vincent-Xavier JUMEL; +Cc: emacs-orgmode
"Vincent-Xavier JUMEL" <endymion@thetys-retz.net> writes:
> From: Vincent-Xavier JUMEL <endymion@tauceticentral.i-did-not-set--mail-host-address--so-tickle-me>
> To: emacs-orgmode@gnu.org
> Subject: Bug: Bug in agenda on DEADLINE/SCHEDULE with -3d [7.4]
> Date: Mon, 21 Feb 2011 23:13:32 +0100
> Message-ID: <87d3mlyr1v.fsf@tauceticentral.i-did-not-set--mail-host-address--so-tickle-me>
> MIME-Version: 1.0
> Content-Type: text/plain; charset=utf-8
> Content-Transfer-Encoding: quoted-printable
>
>
> An entry with a SCHEDULE or a DEADLINE using the <date -%d[dwm]> doesn't
> produce the documented behavior. Anyone does have the same issue ?
>
> ----
>
>
>
> Emacs : GNU Emacs 23.2.1 (i686-pc-linux-gnu, GTK+ Version 2.21.6)
> of 2010-09-01 on rhenium, modified by Debian
> Package: Org-mode version 7.4
>
> current state:
> =3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D
> (setq
> org-export-latex-after-initial-vars-hook '(org-beamer-after-initial-vars)
> org-speed-command-hook '(org-speed-command-default-hook
> org-babel-speed-command-hook)
> org-agenda-files '("~/org/parinux.org")
> org-blocker-hook '(org-block-todo-from-checkboxes)
> org-metaup-hook '(org-babel-load-in-session-maybe)
> org-capture-templates '(("a" "Ajoute un atelier" entry
> (file+headline "~/org/parinux.org"
> "Premier Samedi")
> (file
> "~/.emacs.d/org/templates/atelier_parinux.tpl")
> )
> ("c" "Ajoute une conf=C3=A9rence" entry
> (file+headline "~/org/parinux.org"
> "Conf=C3=A9rences")
> (file
> "~/.emacs.d/org/templates/conference_parinux.tpl=
> ")
> )
> ("v" "Ajoute un vote" entry
> (file+headline "~/org/parinux.org"
> "Votes")
> (file
> "~/.emacs.d/org/templates/vote_parinux_ca_2011.t=
> pl")
> )
> )
> org-after-todo-state-change-hook '(org-clock-out-if-current)
> org-startup-folded 'content
> org-export-blocks-postblock-hook '(org-exp-res/src-name-cleanup)
> org-export-latex-format-toc-function 'org-export-latex-format-toc-default
> org-tab-first-hook '(org-hide-block-toggle-maybe
> org-src-native-tab-command-maybe
> org-babel-hide-result-toggle-maybe)
> org-src-mode-hook '(org-src-babel-configure-edit-buffer
> org-src-mode-configure-edit-buffer)
> org-confirm-shell-link-function 'yes-or-no-p
> org-export-first-hook '(org-beamer-initialize-open-trackers)
> org-agenda-before-write-hook '(org-agenda-add-entry-text)
> org-default-notes-file "~/org/notes"
> org-babel-pre-tangle-hook '(save-buffer)
> org-cycle-hook '(org-cycle-hide-archived-subtrees
> org-cycle-hide-drawers org-cycle-show-empty-lines
> org-optimize-window-after-visibility-change)
> org-export-preprocess-before-normalizing-links-hook '(org-remove-file-link=
> -modifiers)
> org-mode-hook '(#[nil "\300\301\302\303\304$\207"
> [org-add-hook change-major-mode-hook
> org-show-block-all append local]
> 5]
> #[nil "\300\301\302\303\304$\207"
> [org-add-hook change-major-mode-hook
> org-babel-show-result-all append local]
> 5]
> org-babel-result-hide-spec
> org-babel-hide-all-hashes)
> org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
> org-babel-execute-safely-maybe)
> org-confirm-elisp-link-function 'yes-or-no-p
> org-export-interblocks '((lob org-babel-exp-lob-one-liners)
> (src org-babel-exp-inline-src-blocks))
> org-occur-hook '(org-first-headline-recenter)
> org-export-preprocess-before-selecting-backend-code-hook '(org-beamer-sele=
> ct-beamer-code)
> org-export-latex-final-hook '(org-beamer-amend-header
> org-beamer-fix-toc
> org-beamer-auto-fragile-frames
> org-beamer-place-default-actions-for-lists)
> org-enforce-todo-checkbox-dependencies t
> org-metadown-hook '(org-babel-pop-to-session-maybe)
> org-export-blocks '((src org-babel-exp-src-blocks nil)
> (comment org-export-blocks-format-comment t)
> (ditaa org-export-blocks-format-ditaa nil)
> (dot org-export-blocks-format-dot nil))
> )
>
> _______________________________________________
> Emacs-orgmode mailing list
> Please use `Reply All' to send replies to the list.
> Emacs-orgmode@gnu.org
> http://lists.gnu.org/mailman/listinfo/emacs-orgmode
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2011-02-21 22:13 Vincent-Xavier JUMEL
2011-02-23 19:52 ` Bernt Hansen
@ 2011-02-23 19:54 ` Bernt Hansen
2011-04-09 9:41 ` Vincent-Xavier JUMEL
1 sibling, 1 reply; 95+ messages in thread
From: Bernt Hansen @ 2011-02-23 19:54 UTC (permalink / raw)
To: Vincent-Xavier JUMEL; +Cc: emacs-orgmode
"Vincent-Xavier JUMEL" <endymion@thetys-retz.net> writes:
> From: Vincent-Xavier JUMEL <endymion@tauceticentral.i-did-not-set--mail-host-address--so-tickle-me>
> To: emacs-orgmode@gnu.org
> Subject: Bug: Bug in agenda on DEADLINE/SCHEDULE with -3d [7.4]
> Date: Mon, 21 Feb 2011 23:13:32 +0100
> Message-ID: <87d3mlyr1v.fsf@tauceticentral.i-did-not-set--mail-host-address--so-tickle-me>
> MIME-Version: 1.0
> Content-Type: text/plain; charset=utf-8
> Content-Transfer-Encoding: quoted-printable
>
>
> An entry with a SCHEDULE or a DEADLINE using the <date -%d[dwm]> doesn't
> produce the documented behavior. Anyone does have the same issue ?
>
> ----
>
>
>
> Emacs : GNU Emacs 23.2.1 (i686-pc-linux-gnu, GTK+ Version 2.21.6)
> of 2010-09-01 on rhenium, modified by Debian
> Package: Org-mode version 7.4
>
Please provide a sample task and a description of what you get and what
you expected. AFAIK SCHEDULE and -3d is not intended to work - this is
for DEADLINES: only to specify the number of days before the deadline
that you want the entry to show up in your agenda. I don't think it has
any meaning for SCHEDULED: entries.
-Bernt
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2011-02-23 19:54 ` Bernt Hansen
@ 2011-04-09 9:41 ` Vincent-Xavier JUMEL
0 siblings, 0 replies; 95+ messages in thread
From: Vincent-Xavier JUMEL @ 2011-04-09 9:41 UTC (permalink / raw)
To: Bernt Hansen; +Cc: emacs-orgmode
:SCHEDULED: and :DEADLINE: which is confusing. Documentation
<http://orgmode.org/manual/Repeated-tasks.html#Repeated-tasks> example
Le 23 février à 20:54 Bernt Hansen a écrit
>
> Please provide a sample task and a description of what you get and what
> you expected. AFAIK SCHEDULE and -3d is not intended to work - this is
> for DEADLINES: only to specify the number of days before the deadline
> that you want the entry to show up in your agenda. I don't think it has
> any meaning for SCHEDULED: entries.
>
In my opinion, documentation doesn't make a clear separation between
let me think that <date -3d> will work with SCHEDULED.
Documentation should have a paragraph on repetear <date +d> and on
paragraph on delaying.
--
Vincent-Xavier JUMEL GPG Id: 0x2E14CE70 http://thetys-retz.net
Rejoignez les 5500 adhérents de l'April http://www.april.org/adherer
Parinux, logiciel libre à Paris : http://www.parinux.org
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2011-08-06 1:19 Vikas Rawal
0 siblings, 0 replies; 95+ messages in thread
From: Vikas Rawal @ 2011-08-06 1:19 UTC (permalink / raw)
To: emacs-orgmode
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-01-05 17:36 Ab Cd
2012-01-05 17:41 ` About headlines, checkboxes and heritage Ab Cd
0 siblings, 1 reply; 95+ messages in thread
From: Ab Cd @ 2012-01-05 17:36 UTC (permalink / raw)
To: emacs-orgmode@gnu.org
Hello,
Please consider the following file :
------------------------------8<------------------------------
* TODO working
** TODO 1st part of the work
CLOCK: [2012-01-05 jeu. 17:18]
** TODO second part of the work [0/3]
- [ ] Task 1
- [ ] Subtask 1
- [ ] Subtask 2
- [ ] Subtask 3
- [ ] Task 2
- [ ] Task 3
------------------------------>8------------------------------
It I switch the second TODO (ie: C-c C-t on the line "1st part of the work"), it clocks out the headline.
So
------------------------------8<------------------------------
** TODO 1st part of the work
CLOCK: [2012-01-05 jeu. 17:18]
------------------------------>8------------------------------
becomes
------------------------------8<------------------------------
** DONE 1st part of the work
CLOCK: [2012-01-05 jeu. 17:18]--[2012-01-05 jeu. 18:25] => 1:07
------------------------------>8------------------------------
And that's fine.
Now, if I try to toggle the "Subtask"s with cc, it toggles Task 1 accordingly (to "[-] Task 1" and then later to "[X] Task 1"). And then switching all tasks switche the headline checkbox counter (to [1/3], [2/3] and then [3/3]).
Again it's fine.
But why shoudln't a TODO headline containing only checkbox that are all completed ([3/3] in this case) be switched to done?
Also, why can't I toggle "Task 1" ? Let's assume I was away from my computer when completing some or all of the subtasks. I would really like to check Task 1 and have all the Subtasks checked automatically.
The same thing applies if I switch the 2 headlines "{1st,second} part of the work" to DONE. Shouldn't that switch the "working" headline to DONE too?
One last thing. I also think I would be nice that, if I switch "second part of the work" to DONE, the counter would be set to [3/3] and all the tasks and subtasks be checked as done.
What do you think?
Cheers.
^ permalink raw reply [flat|nested] 95+ messages in thread
* About headlines, checkboxes and heritage
2012-01-05 17:36 (no subject) Ab Cd
@ 2012-01-05 17:41 ` Ab Cd
2012-01-06 13:40 ` Nicolas Goaziou
0 siblings, 1 reply; 95+ messages in thread
From: Ab Cd @ 2012-01-05 17:41 UTC (permalink / raw)
To: emacs-orgmode@gnu.org
Hello,
Please consider the following file :
------------------------------8<------------------------------
* TODO working
** TODO 1st part of the work
CLOCK: [2012-01-05 jeu. 17:18]
** TODO second part of the work [0/3]
- [ ] Task 1
- [ ] Subtask 1
- [ ] Subtask 2
- [ ] Subtask 3
- [ ] Task 2
- [ ] Task 3
------------------------------>8------------------------------
It I switch the second TODO (ie: C-c C-t on the line "1st part of the work"), it clocks out the headline.
So
------------------------------8<------------------------------
** TODO 1st part of the work
CLOCK: [2012-01-05 jeu. 17:18]
------------------------------>8------------------------------
becomes
------------------------------8<------------------------------
** DONE 1st part of the work
CLOCK: [2012-01-05 jeu. 17:18]--[2012-01-05 jeu. 18:25] => 1:07
------------------------------>8------------------------------
And that's fine.
Now, if I try to toggle the "Subtask"s with cc, it toggles Task 1 accordingly (to "[-] Task 1" and then later to "[X] Task 1"). And then switching all tasks switche the headline checkbox counter (to [1/3], [2/3] and then [3/3]).
Again it's fine.
But why shoudln't a TODO headline containing only checkbox that are all completed ([3/3] in this case) be switched to done?
Also, why can't I toggle "Task 1" ? Let's assume I was away from my computer when completing some or all of the subtasks. I would really like to check Task 1 and have all the Subtasks checked automatically.
The same thing applies if I switch the 2 headlines "{1st,second} part of the work" to DONE. Shouldn't that switch the "working" headline to DONE too?
One last thing. I also think I would be nice that, if I switch "second part of the work" to DONE, the counter would be set to [3/3] and all the tasks and subtasks be checked as done.
What do you think?
Cheers.
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: About headlines, checkboxes and heritage
2012-01-05 17:41 ` About headlines, checkboxes and heritage Ab Cd
@ 2012-01-06 13:40 ` Nicolas Goaziou
0 siblings, 0 replies; 95+ messages in thread
From: Nicolas Goaziou @ 2012-01-06 13:40 UTC (permalink / raw)
To: Ab Cd; +Cc: emacs-orgmode@gnu.org
Hello,
Ab Cd <nati_cdg@yahoo.fr> writes:
> Please consider the following file :
>
> * TODO working
> ** TODO 1st part of the work
> CLOCK: [2012-01-05 jeu. 17:18]
>
> ** TODO second part of the work [0/3]
> - [ ] Task 1
> - [ ] Subtask 1
> - [ ] Subtask 2
> - [ ] Subtask 3
> - [ ] Task 2
> - [ ] Task 3
>
> But why shoudln't a TODO headline containing only checkbox that are
> all completed ([3/3] in this case) be switched to done?
Because lists and headlines are mostly unrelated. There's no particular
reason that completing all tasks from the list should end the second
part of the work. There might be some things left to be done, like
writing a report... many things that Org can't guess. It's up to the
user to tell when it is appropriate to close the task.
Now, if the automatic closing of tasks fits your needs, you can make it
possible with an appropriate value for `org-checkbox-statistics-hook'.
> Also, why can't I toggle "Task 1" ? Let's assume I was away from my
> computer when completing some or all of the subtasks. I would really
> like to check Task 1 and have all the Subtasks checked automatically.
Mark region between "Task 1" and Subtask 3, then use C-c C-x C-b
> One last thing. I also think I would be nice that, if I switch "second
> part of the work" to DONE, the counter would be set to [3/3] and all
> the tasks and subtasks be checked as done.
You want to treat lists as lesser headlines, which they are not. At
least by default.
Though, you can use `org-after-todo-state-change-hook' to call, each
time a state change to a "done"-like keyword, `org-toggle-checkbox' on
the headline (provided the first check-box in the section is unchecked).
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-01-23 12:00 Tom Regner
2012-01-23 16:34 ` Tom Regner
2012-01-23 20:31 ` Eric Schulte
0 siblings, 2 replies; 95+ messages in thread
From: Tom Regner @ 2012-01-23 12:00 UTC (permalink / raw)
To: emacs-orgmode
From aea3adc952de33aa9acad94fbd9baa717b7b1a1e Mon Sep 17 00:00:00 2001
From: Tom Regner <tom@goochesa.de>
Rcpt To: emacs-orgmode@gnu.org
Date: Mon, 23 Jan 2012 12:39:52 +0100
Subject: [PATCH] ob.el Adhere to current :padline header during noweb dereferencing.
At the moment using the :noweb-ref: property approach on subtrees results in the tangled code beeing broken
because the newlines before the #+end_src line are excluded from the output. This patch uses :padline
to check if a newline should be added. The default being yes, tangling with subtree mangling now produces correct
results; code depending on the (errorneous?) behaviour would be broken though.
---
lisp/ob.el | 9 ++++++---
1 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/lisp/ob.el b/lisp/ob.el
index 47be708..398a997 100644
--- a/lisp/ob.el
+++ b/lisp/ob.el
@@ -2211,13 +2211,16 @@ block but are passed literally to the \"example-block\"."
(nth 4 i))
source-name)
(let* ((body (org-babel-expand-noweb-references i))
- (full (if comment
+ (padded (if (not (string= "no" (cdr (assoc :padline (nth 2 i)))))
+ (concat body "\n")
+ body ))
+ (full (if comment
((lambda (cs)
(concat (c-wrap (car cs)) "\n"
- body "\n"
+ padded "\n"
(c-wrap (cadr cs))))
(org-babel-tangle-comment-links i))
- body)))
+ padded)))
(setq expansion (concat expansion full))))))))
expansion)
;; possibly raise an error if named block doesn't exist
--
1.7.5.4
^ permalink raw reply related [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-01-23 12:00 Tom Regner
@ 2012-01-23 16:34 ` Tom Regner
2012-01-23 20:31 ` Eric Schulte
1 sibling, 0 replies; 95+ messages in thread
From: Tom Regner @ 2012-01-23 16:34 UTC (permalink / raw)
To: emacs-orgmode
Tom Regner <tom@goochesa.de> writes:
> From aea3adc952de33aa9acad94fbd9baa717b7b1a1e Mon Sep 17 00:00:00 2001
> From: Tom Regner <tom@goochesa.de>
> Rcpt To: emacs-orgmode@gnu.org
> Date: Mon, 23 Jan 2012 12:39:52 +0100
> Subject: [PATCH] ob.el Adhere to current :padline header during noweb dereferencing.
[...]
I'm awfully sorry -- shall I remail the patch without the errorneous
empty line in between the headers, so that the patchwork server will
receive it?
kind regards,
Tom
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-01-23 12:00 Tom Regner
2012-01-23 16:34 ` Tom Regner
@ 2012-01-23 20:31 ` Eric Schulte
2012-01-24 1:55 ` Tom Regner
1 sibling, 1 reply; 95+ messages in thread
From: Eric Schulte @ 2012-01-23 20:31 UTC (permalink / raw)
To: Tom Regner; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 272 bytes --]
I'd rather not change the default silently in this way.
Could you provide a minimal example of the difference you describe? I
just tried viewing the expanded form of the following code block and saw
no difference between :noweb-ref and normal #+name: based expansions.
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #2: nowebs.org --]
[-- Type: text/x-org, Size: 175 bytes --]
* examples
#+name: first
#+begin_src sh
echo 1
#+end_src
#+begin_src sh :noweb-ref second
echo 2
#+end_src
#+begin_src sh :noweb yes
<<first>>
<<second>>
#+end_src
[-- Attachment #3: Type: text/plain, Size: 1730 bytes --]
Thanks,
Tom Regner <tom@goochesa.de> writes:
> From aea3adc952de33aa9acad94fbd9baa717b7b1a1e Mon Sep 17 00:00:00 2001
> From: Tom Regner <tom@goochesa.de>
> Rcpt To: emacs-orgmode@gnu.org
> Date: Mon, 23 Jan 2012 12:39:52 +0100
> Subject: [PATCH] ob.el Adhere to current :padline header during noweb dereferencing.
>
> At the moment using the :noweb-ref: property approach on subtrees results in the tangled code beeing broken
> because the newlines before the #+end_src line are excluded from the output. This patch uses :padline
> to check if a newline should be added. The default being yes, tangling with subtree mangling now produces correct
> results; code depending on the (errorneous?) behaviour would be broken though.
> ---
> lisp/ob.el | 9 ++++++---
> 1 files changed, 6 insertions(+), 3 deletions(-)
>
> diff --git a/lisp/ob.el b/lisp/ob.el
> index 47be708..398a997 100644
> --- a/lisp/ob.el
> +++ b/lisp/ob.el
> @@ -2211,13 +2211,16 @@ block but are passed literally to the \"example-block\"."
> (nth 4 i))
> source-name)
> (let* ((body (org-babel-expand-noweb-references i))
> - (full (if comment
> + (padded (if (not (string= "no" (cdr (assoc :padline (nth 2 i)))))
> + (concat body "\n")
> + body ))
> + (full (if comment
> ((lambda (cs)
> (concat (c-wrap (car cs)) "\n"
> - body "\n"
> + padded "\n"
> (c-wrap (cadr cs))))
> (org-babel-tangle-comment-links i))
> - body)))
> + padded)))
> (setq expansion (concat expansion full))))))))
> expansion)
> ;; possibly raise an error if named block doesn't exist
--
Eric Schulte
http://cs.unm.edu/~eschulte/
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-01-23 20:31 ` Eric Schulte
@ 2012-01-24 1:55 ` Tom Regner
0 siblings, 0 replies; 95+ messages in thread
From: Tom Regner @ 2012-01-24 1:55 UTC (permalink / raw)
To: emacs-orgmode
Eric Schulte <eric.schulte@gmx.com> writes:
> I'd rather not change the default silently in this way.
I understand that.
>
> Could you provide a minimal example of the difference you describe? I
> just tried viewing the expanded form of the following code block and saw
> no difference between :noweb-ref and normal #+name: based expansions.
>
> * examples
>
> #+name: first
> #+begin_src sh
> echo 1
> #+end_src
>
> #+begin_src sh :noweb-ref second
> echo 2
> #+end_src
> #+begin_src sh :noweb yes
> <<first>>
> <<second>>
> #+end_src
>
> Thanks,
>
Example document:
--------------------------->%--------------------------------
* Subtree
:PROPERTIES:
:noweb-ref: subtree
:END:
** Part 1
#+begin_src sh
Line One
#+end_src sh
** Part 2
#+begin_src sh
Line Two
#+end_src sh
* Assamble it
#+begin_src sh :tangle yes :noweb tangle
<<subtree>>
#+end_src sh
--------------------------->%--------------------------------
tangled without my patch:
--------------------------->%--------------------------------
Line OneLine Two
--------------------------->%--------------------------------
tangled with my patch
--------------------------->%--------------------------------
Line One
Line Two
--------------------------->%--------------------------------
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-05-11 20:56 Rick Frankel
@ 2012-05-11 20:38 ` Eric Schulte
2012-05-11 22:43 ` Bernt Hansen
2012-05-17 6:23 ` Bastien
0 siblings, 2 replies; 95+ messages in thread
From: Eric Schulte @ 2012-05-11 20:38 UTC (permalink / raw)
To: Rick Frankel; +Cc: emacs-orgmode
Thanks for the patch, I would like to apply it.
Have you signed the FSF papers for contribution to Org-mode and Emacs?
If you haven't would you be willing to? See the Org-mode contribution
instructions for more information.
http://orgmode.org/worg/org-contribute.html
Thanks!
rick@rickster.com (Rick Frankel) writes:
> From 113bbbe1ce9540e2af8c613ba655599fc474cedd Mon Sep 17 00:00:00 2001
> From: Rick Frankel <rick@rickster.com>
> Date: Fri, 11 May 2012 16:54:32 -0400
> Subject: [PATCH] Add support for perl dbi to SQL code block
>
> * lisp/ob-sql.el (org-babel-execute:sql): Add dbi as a suppored engine.
>
> Invokes `dbish' with the arguments specified to ":cmdline". Minimum is
> usually the "dbi:{dbd}" argument, plus the username and password if
> required.
> For example:
>
> lisp/ob-sql.el | 11 ++++++++++-
> 1 file changed, 10 insertions(+), 1 deletion(-)
>
> diff --git a/lisp/ob-sql.el b/lisp/ob-sql.el
> index e3f6edd..c6d4790 100644
> --- a/lisp/ob-sql.el
> +++ b/lisp/ob-sql.el
> @@ -71,6 +71,11 @@ This function is called by `org-babel-execute-src-block'."
> (org-babel-temp-file "sql-out-")))
> (header-delim "")
> (command (case (intern engine)
> + ('dbi (format "dbish --batch %s < %s | sed '%s' > %s"
> + (or cmdline "")
> + (org-babel-process-file-name in-file)
> + "/^+/d;s/^\|//;$d"
> + (org-babel-process-file-name out-file)))
> ('monetdb (format "mclient -f tab %s < %s > %s"
> (or cmdline "")
> (org-babel-process-file-name in-file)
> @@ -90,7 +95,11 @@ This function is called by `org-babel-execute-src-block'."
> (or cmdline "")))
> (t (error "no support for the %s sql engine" engine)))))
> (with-temp-file in-file
> - (insert (org-babel-expand-body:sql body params)))
> + (insert
> + (case (intern engine)
> + ('dbi "/format partbox\n")
> + (t ""))
> + (org-babel-expand-body:sql body params)))
> (message command)
> (shell-command command)
> (if (or (member "scalar" result-params)
--
Eric Schulte
http://cs.unm.edu/~eschulte/
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-05-11 20:56 Rick Frankel
2012-05-11 20:38 ` Eric Schulte
0 siblings, 1 reply; 95+ messages in thread
From: Rick Frankel @ 2012-05-11 20:56 UTC (permalink / raw)
To: emacs-orgmode
From 113bbbe1ce9540e2af8c613ba655599fc474cedd Mon Sep 17 00:00:00 2001
From: Rick Frankel <rick@rickster.com>
Date: Fri, 11 May 2012 16:54:32 -0400
Subject: [PATCH] Add support for perl dbi to SQL code block
* lisp/ob-sql.el (org-babel-execute:sql): Add dbi as a suppored engine.
Invokes `dbish' with the arguments specified to ":cmdline". Minimum is
usually the "dbi:{dbd}" argument, plus the username and password if
required.
For example:
#+begin_src sql :engine dbi :cmdline dbi:Pg:database=postgres
---
lisp/ob-sql.el | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/lisp/ob-sql.el b/lisp/ob-sql.el
index e3f6edd..c6d4790 100644
--- a/lisp/ob-sql.el
+++ b/lisp/ob-sql.el
@@ -71,6 +71,11 @@ This function is called by `org-babel-execute-src-block'."
(org-babel-temp-file "sql-out-")))
(header-delim "")
(command (case (intern engine)
+ ('dbi (format "dbish --batch %s < %s | sed '%s' > %s"
+ (or cmdline "")
+ (org-babel-process-file-name in-file)
+ "/^+/d;s/^\|//;$d"
+ (org-babel-process-file-name out-file)))
('monetdb (format "mclient -f tab %s < %s > %s"
(or cmdline "")
(org-babel-process-file-name in-file)
@@ -90,7 +95,11 @@ This function is called by `org-babel-execute-src-block'."
(or cmdline "")))
(t (error "no support for the %s sql engine" engine)))))
(with-temp-file in-file
- (insert (org-babel-expand-body:sql body params)))
+ (insert
+ (case (intern engine)
+ ('dbi "/format partbox\n")
+ (t ""))
+ (org-babel-expand-body:sql body params)))
(message command)
(shell-command command)
(if (or (member "scalar" result-params)
--
1.7.10.1
^ permalink raw reply related [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-05-11 20:38 ` Eric Schulte
@ 2012-05-11 22:43 ` Bernt Hansen
2012-05-17 6:23 ` Bastien
1 sibling, 0 replies; 95+ messages in thread
From: Bernt Hansen @ 2012-05-11 22:43 UTC (permalink / raw)
To: Eric Schulte; +Cc: Rick Frankel, emacs-orgmode
Eric Schulte <eric.schulte@gmx.com> writes:
>> * lisp/ob-sql.el (org-babel-execute:sql): Add dbi as a suppored engine.
s/suppored/supported/
-Bernt
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-05-11 20:38 ` Eric Schulte
2012-05-11 22:43 ` Bernt Hansen
@ 2012-05-17 6:23 ` Bastien
1 sibling, 0 replies; 95+ messages in thread
From: Bastien @ 2012-05-17 6:23 UTC (permalink / raw)
To: Eric Schulte; +Cc: Rick Frankel, emacs-orgmode
Hi Eric and Rick,
Eric Schulte <eric.schulte@gmx.com> writes:
> Thanks for the patch, I would like to apply it.
>
> Have you signed the FSF papers for contribution to Org-mode and Emacs?
I guess some communication happened offlist -- if Rick does not have the
FSF papers, we need to mark the change as TINYCHANGE.
> If you haven't would you be willing to? See the Org-mode contribution
> instructions for more information.
> http://orgmode.org/worg/org-contribute.html
Also the ChangeLog should start with an uppercase letter and end with a
point... sorry to nitpick on this, but I try to ease my life in
emacs-devel :)
Thanks for the patch anyway,
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-05-30 0:51 ` Mark E. Shoulson
@ 2012-05-31 1:50 ` Mark Shoulson
2012-05-31 13:38 ` Nicolas Goaziou
0 siblings, 1 reply; 95+ messages in thread
From: Mark Shoulson @ 2012-05-31 1:50 UTC (permalink / raw)
To: emacs-orgmode
Mark E. Shoulson <mark <at> kli.org> writes:
>
> All right, bottom line, this is sort of what I'm seeing. I'm not 100%
> sure which files should house these things, but something like this:
>
> 1) a variable containing for each language regexp for each of: open
> double-quote, close double-quote, open single-quote, close single-quote,
> and maybe mid-word apostrophe. Odds are these regexps are going to be
> the same for just about all languages (the regexps detecting them, mind
> you), so probably should have some sort of default that the alist can
> just reference. A language should also be allowed to define other quote
> regexps in its list too. We need these to be ordered, with a standard
> set, so that we can have...
>
> 2) for each *exporter* (including on-screen display), a variable that
> defines, for each language, what the *substitution* will be for
> open-double-quote, close-double-quote, etc. Other extras can be defined
> too. That way we can have an exporter-independent way to detect quotes
> to be smartified, but each exporter has its own way to smartify them.
>
> 3) Since most exporters are probably going to be handling doing the
> process approximately the same (match the regexp, stick in the
> associated substitution), org-export.el should have a generic function
> that does this which each exporter *may* call in (or as) its
> quote-smartifier in its text translator, unless it needs something more
> specific which it can provide itself.
>
> In terms of what is handled, the idea in my head is that we would expect
> the writer to be using " or ' to surround their quotes, regardless of
> what their native custom is (if they're doing it using their
> language-specific quote-marks, we don't need to bother with all this
> anyway). Goal is to handle either "quotes" or 'quotes' in either
> nesting (or no nesting, if someone does "quote' for some reason), and
> with any luck not get too confused with other uses of apostrophe.
>
> It makes sense to me, but I bet I explained it badly and people are
> going to have all kinds of issues with it. :)
>
> No telling when (if?) I'll be able to produce something along these
> lines, but it's something to start thinking about anyway.
>
> ~mark
>
>
Regarding the "this is what I'm seeing", I paste at the bottom a
preliminary patch. It is totally *not* worth actually applying it unless you
want to develop this; it's a snapshot mid-development. But it does seem to
actually work. The same set of regexps is used, and the same function, though
that is defeasible and an exporter can define its own. The hardest part was
getting the onscreen versions showing right (also the most recently and probably
best tested, so the actual exporters might be more bumpy). Actual substitutions
being used are not necessarily typologically sensible; chosen more so it's
easier to see the action of the process. Nothing is in the right place, things
that should be customizables aren't... it's proof-of-concept. Am I going in the
right direction, as far as export-engine is concerned?
==========
From 420048063e3fd2af1b019c48864d58d82cef62ef Mon Sep 17 00:00:00 2001
From: Mark Shoulson <mark@kli.org>
Date: Tue, 29 May 2012 23:01:12 -0400
Subject: [PATCH] Just barely works, nothing in the right places. For
entertainment purposes only.
---
contrib/lisp/org-e-html.el | 5 ++++
contrib/lisp/org-e-latex.el | 53 +++++++++++++++++++++----------------------
contrib/lisp/org-export.el | 52 ++++++++++++++++++++++++++++++++++++++++++
lisp/org.el | 50 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 133 insertions(+), 27 deletions(-)
diff --git a/contrib/lisp/org-e-html.el b/contrib/lisp/org-e-html.el
index de98493..b851713 100644
--- a/contrib/lisp/org-e-html.el
+++ b/contrib/lisp/org-e-html.el
@@ -1077,6 +1077,11 @@ in order to mimic default behaviour:
;;;; Plain text
+(defvar org-e-html-quote-replacements
+ '(("fr" "« " " »" "‘" "’" "’")
+ ("en" "“" "”" "‘" "’" "’")
+ ("de" "„" "“" "‚" "‘" "’"))
+
(defcustom org-e-html-quotes
'(("fr"
("\\(\\s-\\|[[(]\\|^\\)\"" . "«~")
diff --git a/contrib/lisp/org-e-latex.el b/contrib/lisp/org-e-latex.el
index 67e9197..540ebe1 100644
--- a/contrib/lisp/org-e-latex.el
+++ b/contrib/lisp/org-e-latex.el
@@ -687,6 +687,10 @@ during latex export it will output
;;;; Plain text
+(defvar org-e-latex-quote-replacements
+ '(("fr" "«~" "~»" "‹~" "~›" "/!")
+ ("en" "((" "))" ".(" ")." "/")))
+
(defcustom org-e-latex-quotes
'(("fr"
("\\(\\s-\\|[[(]\\|^\\)\"" . "«~")
@@ -699,25 +703,22 @@ during latex export it will output
"Alist for quotes to use when converting english double-quotes.
The CAR of each item in this alist is the language code.
-The CDR of each item in this alist is a list of three CONS:
-- the first CONS defines the opening quote;
-- the second CONS defines the closing quote;
-- the last CONS defines single quotes.
+The CDR of each item in this alist is a list of CONS:
+- the first CONS should define the opening quote;
+- the second CONS should define the closing quote;
+- subsequent CONS should define any other quotes, e.g. single, etc.
For each item in a CONS, the first string is a regexp
for allowed characters before/after the quote, the second
string defines the replacement string for this quote."
:group 'org-export-e-latex
- :type '(list
- (cons :tag "Opening quote"
- (string :tag "Regexp for char before")
- (string :tag "Replacement quote "))
- (cons :tag "Closing quote"
- (string :tag "Regexp for char after ")
- (string :tag "Replacement quote "))
- (cons :tag "Single quote"
- (string :tag "Regexp for char before")
- (string :tag "Replacement quote "))))
+ :type '(repeat
+ (cons
+ (string :tag "language code")
+ (repeat
+ (cons :tag "Quote"
+ (string :tag "Regexp ")
+ (string :tag "Replacement quote "))))))
;;;; Compilation
@@ -852,19 +853,17 @@ nil."
options
","))
-(defun org-e-latex--quotation-marks (text info)
- "Export quotation marks depending on language conventions.
-TEXT is a string containing quotation marks to be replaced. INFO
-is a plist used as a communication channel."
- (mapc (lambda(l)
- (let ((start 0))
- (while (setq start (string-match (car l) text start))
- (let ((new-quote (concat (match-string 1 text) (cdr l))))
- (setq text (replace-match new-quote t t text))))))
- (cdr (or (assoc (plist-get info :language) org-e-latex-quotes)
- ;; Falls back on English.
- (assoc "en" org-e-latex-quotes))))
- text)
+(defun org-e-latex--quotation-marks (text info)
+ (org-export-quotation-marks text info org-e-latex-quote-replacements))
+ ;; (mapc (lambda(l)
+ ;; (let ((start 0))
+ ;; (while (setq start (string-match (car l) text start))
+ ;; (let ((new-quote (concat (match-string 1 text) (cdr l))))
+ ;; (setq text (replace-match new-quote t t text))))))
+ ;; (cdr (or (assoc (plist-get info :language) org-e-latex-quotes)
+ ;; ;; Falls back on English.
+ ;; (assoc "en" org-e-latex-quotes))))
+ ;; text)
(defun org-e-latex--wrap-label (element output)
"Wrap label associated to ELEMENT around OUTPUT, if appropriate.
diff --git a/contrib/lisp/org-export.el b/contrib/lisp/org-export.el
index b9294e5..aacb448 100644
--- a/contrib/lisp/org-export.el
+++ b/contrib/lisp/org-export.el
@@ -284,6 +284,58 @@ rules.")
:tag "Org Export General"
:group 'org-export)
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Probably a defcustom eventually.
+
+;; Each element of this consists of: car=language code, cdr=list of
+;; double-quote-open-regexp, double-quote-close-regexp,
+;; single-quote-open-regexp, single-quote-close-regexp, &optional
+;; single-apostrophe regexp?
+;; Just about all will be the same anyway, so mostly language DEFAULT.
+
+;; For testing purposes, poorly-designed at first.
+(defvar org-export-quotes-regexps
+ '((DEFAULT
+ "\\(?:\\s-\\|[[(]\\|^\\)\\(\"\\)\\w"
+ "\\(?:\\S-\\)\\(\"\\)\\s-"
+ "\\(?:\\s-\\|(\\|^\\)\\('\\)\\w"
+ "\\w\\('\\)\\(?:\\s-\\|\\s.\\|$\\)"
+ "\\w\\('\\)\\w")))
+
+;; Generic function, usable by exporters, but they can define their own
+;; instead.
+(defun org-export-quotation-marks (text info replacements)
+ "Export quotation marks depending on language conventions.
+TEXT is a string containing quotation marks to be replaced. INFO
+is a plist used as a communication channel."
+ (let* ((start 0)
+ (regexps
+ (cdr
+ (or
+ (assoc (plist-get info :language)
+ org-export-quotes-regexps)
+ (assoc 'DEFAULT org-export-quotes-regexps))))
+ (subs (cdr (or (assoc (plist-get info :language)
+ replacements)
+ (assoc "en" replacements))))
+ (quotes (pairlis regexps subs)))
+ (mapc (lambda (p)
+ (let ((re (car p))
+ (su (cdr p)))
+ (while (setq start (string-match re text start))
+ (setq text (replace-match su t t text 1)))))
+ quotes))
+ text)
+
+(defvar org-screen-smart-quotes
+ '(("en" "“" "”" "‘" "’" "’")
+ ("fr" "«" "»" "‹" "›" "’")
+ ("de" "„" "“" "‚" "’" "’")))
+
+
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
(defcustom org-export-with-archived-trees 'headline
"Whether sub-trees with the ARCHIVE tag should be exported.
diff --git a/lisp/org.el b/lisp/org.el
index 8a141cf..72bf4b0 100644
--- a/lisp/org.el
+++ b/lisp/org.el
@@ -5927,6 +5927,7 @@ needs to be inserted at a specific position in the
font-lock sequence.")
;; Specials
'(org-do-latex-and-special-faces)
'(org-fontify-entities)
+ '(org-fontify-quotes)
'(org-raise-scripts)
;; Code
'(org-activate-code (1 'org-code t))
@@ -5948,6 +5949,55 @@ needs to be inserted at a specific position in the
font-lock sequence.")
'(org-font-lock-keywords t nil nil backward-paragraph))
(kill-local-variable 'font-lock-keywords) nil))
+(defvar org-smart-quotes nil)
+(defvar org-smart-quotes-replacements
+ '("«" "»" "‹" "›" "’"))
+;; '("“" "”" "‘" "’" "’"))
+
+;; Nother idea, try this: like in original smart-quotes attempt.
+;; String all the regexps into one big regexp with \\| between them.
+;; Possibly have to parenthesize them but that's okay, since if
+;; each elt is in its own group, then those will be the odd-numbered groups
+;; and the inner group (of the actual quote) will be groups 2,4,6, etc.
+
+(defun splice-string (lst join)
+ (if (null (cdr lst)) (car lst)
+ (concat (car lst) join (splice-string (cdr lst) join))))
+
+(defun org-fontify-quotes (limit)
+ (require 'org-export)
+ (when org-smart-quotes
+ (let* ((start (point))
+ k su
+ (regexps
+ (cdr
+ (assoc 'DEFAULT org-export-quotes-regexps)))
+ (allreg (splice-string regexps "\\|"))
+ (quotes (pairlis regexps org-smart-quotes-replacements)))
+ ;; (message "%s" allreg)
+ (catch 'match
+ (while (re-search-forward allreg limit t)
+ (cond ((match-string 1)
+ (setq k 1 su (nth 0 org-smart-quotes-replacements)))
+ ((match-string 2)
+ (setq k 2 su (nth 1 org-smart-quotes-replacements)))
+ ((match-string 3)
+ (setq k 3 su (nth 2 org-smart-quotes-replacements)))
+ ((match-string 4)
+ (setq k 4 su (nth 3 org-smart-quotes-replacements)))
+ ((match-string 5)
+ (setq k 5 su (nth 4 org-smart-quotes-replacements)))
+ ;;(t
+ ;; (message "????")))
+ )
+ ;; (message "%s %s" k (match-data))
+ (add-text-properties (match-beginning k) (match-end k)
+ (list 'font-lock-fontified t
+ 'face 'org-warning))
+ (compose-region (match-beginning k) (match-end k) su nil)
+ (backward-char 1)
+ (throw 'match t))))))
+
(defun org-toggle-pretty-entities ()
"Toggle the composition display of entities as UTF8 characters."
(interactive)
--
1.7.7.6
^ permalink raw reply related [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-05-31 1:50 ` (no subject) Mark Shoulson
@ 2012-05-31 13:38 ` Nicolas Goaziou
0 siblings, 0 replies; 95+ messages in thread
From: Nicolas Goaziou @ 2012-05-31 13:38 UTC (permalink / raw)
To: Mark Shoulson; +Cc: emacs-orgmode
Hello,
Mark Shoulson <mark@kli.org> writes:
> +(defvar org-e-html-quote-replacements
> + '(("fr" "« " " »" "‘" "’" "’")
> + ("en" "“" "”" "‘" "’" "’")
> + ("de" "„" "“" "‚" "‘" "’"))
A docstring will be required for this variable. It should be
a defcustom.
> +(defvar org-e-latex-quote-replacements
> + '(("fr" "«~" "~»" "‹~" "~›" "/!")
> + ("en" "((" "))" ".(" ")." "/")))
Ditto.
> (defcustom org-e-latex-quotes
> '(("fr"
> ("\\(\\s-\\|[[(]\\|^\\)\"" . "«~")
> @@ -699,25 +703,22 @@ during latex export it will output
> "Alist for quotes to use when converting english double-quotes.
>
> The CAR of each item in this alist is the language code.
> -The CDR of each item in this alist is a list of three CONS:
> -- the first CONS defines the opening quote;
> -- the second CONS defines the closing quote;
> -- the last CONS defines single quotes.
> +The CDR of each item in this alist is a list of CONS:
> +- the first CONS should define the opening quote;
> +- the second CONS should define the closing quote;
> +- subsequent CONS should define any other quotes, e.g. single, etc.
>
> For each item in a CONS, the first string is a regexp
> for allowed characters before/after the quote, the second
> string defines the replacement string for this quote."
> :group 'org-export-e-latex
> - :type '(list
> - (cons :tag "Opening quote"
> - (string :tag "Regexp for char before")
> - (string :tag "Replacement quote "))
> - (cons :tag "Closing quote"
> - (string :tag "Regexp for char after ")
> - (string :tag "Replacement quote "))
> - (cons :tag "Single quote"
> - (string :tag "Regexp for char before")
> - (string :tag "Replacement quote "))))
> + :type '(repeat
> + (cons
> + (string :tag "language code")
> + (repeat
> + (cons :tag "Quote"
> + (string :tag "Regexp ")
> + (string :tag "Replacement quote "))))))
The docstring is not valid. It's now an an alist whose key is the
language code and the value is a list of strings, not cons cells.
> +(defun org-e-latex--quotation-marks (text info)
> + (org-export-quotation-marks text info org-e-latex-quote-replacements))
> + ;; (mapc (lambda(l)
> + ;; (let ((start 0))
> + ;; (while (setq start (string-match (car l) text start))
> + ;; (let ((new-quote (concat (match-string 1 text) (cdr l))))
> + ;; (setq text (replace-match new-quote t t text))))))
> + ;; (cdr (or (assoc (plist-get info :language) org-e-latex-quotes)
> + ;; ;; Falls back on English.
> + ;; (assoc "en" org-e-latex-quotes))))
> + ;; text)
Use directly `org-e-latex-quote-replacements' in code then.
> +;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
> +;; Probably a defcustom eventually.
> +
> +;; Each element of this consists of: car=language code, cdr=list of
> +;; double-quote-open-regexp, double-quote-close-regexp,
> +;; single-quote-open-regexp, single-quote-close-regexp, &optional
> +;; single-apostrophe regexp?
> +;; Just about all will be the same anyway, so mostly language DEFAULT.
> +
> +;; For testing purposes, poorly-designed at first.
> +(defvar org-export-quotes-regexps
> + '((DEFAULT
> + "\\(?:\\s-\\|[[(]\\|^\\)\\(\"\\)\\w"
> + "\\(?:\\S-\\)\\(\"\\)\\s-"
> + "\\(?:\\s-\\|(\\|^\\)\\('\\)\\w"
> + "\\w\\('\\)\\(?:\\s-\\|\\s.\\|$\\)"
> + "\\w\\('\\)\\w")))
I'm not sure this variable can be used for both the buffer and the
export engine. Export back-ends will only see chunks of the paragraph.
For example, in the following text,
He crossed the Rubicon and said: "/Alea jacta est./"
Plain text translators will see three strings:
1. "He crossed the Rubicon and said: \""
2. "Alea jacta est."
3. "\""
In case 1, you have an opening quote with nothing after it. In case 3,
you have a closing quote with nothing before or after it. Plain regexps
can't help here.
The only solution in can think of is to do quote substitutions in
paragraphs within the parse tree before they reach the translators (i.e.
with `org-export-filter-parse-tree-functions').
That's the only way to know if "\"" is an opening or a closing quote,
for example. The current approach won't work.
> +;; Generic function, usable by exporters, but they can define their own
> +;; instead.
> +(defun org-export-quotation-marks (text info replacements)
> + "Export quotation marks depending on language conventions.
> +TEXT is a string containing quotation marks to be replaced. INFO
> +is a plist used as a communication channel."
Please document each argument in the docstring.
> + (let* ((start 0)
> + (regexps
> + (cdr
> + (or
> + (assoc (plist-get info :language)
> + org-export-quotes-regexps)
> + (assoc 'DEFAULT org-export-quotes-regexps))))
Use `assq' instead of `assoc' in the second case.
> + (subs (cdr (or (assoc (plist-get info :language)
> + replacements)
> + (assoc "en" replacements))))
> + (quotes (pairlis regexps subs)))
> + (mapc (lambda (p)
> + (let ((re (car p))
> + (su (cdr p)))
> + (while (setq start (string-match re text start))
> + (setq text (replace-match su t t text 1)))))
Use `replace-regexp-in-string' instead.
(replace-regexp-in-string (car p) (cdr p) text t t 1)
> + quotes))
> + text)
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-08-24 16:21 Feiming Chen
0 siblings, 0 replies; 95+ messages in thread
From: Feiming Chen @ 2012-08-24 16:21 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 28 bytes --]
Sincerely,
Feiming Chen
[-- Attachment #2: Type: text/html, Size: 250 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-09-29 7:30 Neuwirth Erich
2012-09-29 7:39 ` Bastien
2012-09-29 9:52 ` Achim Gratz
0 siblings, 2 replies; 95+ messages in thread
From: Neuwirth Erich @ 2012-09-29 7:30 UTC (permalink / raw)
To: emacs-orgmode@gnu.org emacs-orgmode@gnu.org
I just did make up2
And on OSX 10.8.2 and Emacs 24.2 I get:
Ran 208 tests, 207 results as expected, 1 unexpected (2012-09-29 09:27:47+0200)
6 expected failures
1 unexpected results:
FAILED test-ob/org-babel-remove-result--results-org
make[1]: *** [test-dirty] Error 1
make: *** [up2] Error 2
Perhaps this is useful information
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-09-29 7:30 Neuwirth Erich
@ 2012-09-29 7:39 ` Bastien
2012-09-29 8:09 ` Achim Gratz
2012-09-29 9:52 ` Achim Gratz
1 sibling, 1 reply; 95+ messages in thread
From: Bastien @ 2012-09-29 7:39 UTC (permalink / raw)
To: Neuwirth Erich; +Cc: emacs-orgmode@gnu.org emacs-orgmode@gnu.org
Neuwirth Erich <erich.neuwirth@univie.ac.at> writes:
> 1 unexpected results:
> FAILED test-ob/org-babel-remove-result--results-org
Fixed, thanks.
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-09-29 7:39 ` Bastien
@ 2012-09-29 8:09 ` Achim Gratz
2012-09-29 9:12 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Achim Gratz @ 2012-09-29 8:09 UTC (permalink / raw)
To: emacs-orgmode
Bastien writes:
>> 1 unexpected results:
>> FAILED test-ob/org-babel-remove-result--results-org
>
> Fixed, thanks.
There are some tests that are supposed to have whitespace errors, based
on the comments in the file, but you've removed them along with all the
others. I've reverted that hunk of the commit.
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
SD adaptations for Waldorf Q V3.00R3 and Q+ V3.54R2:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-09-29 8:09 ` Achim Gratz
@ 2012-09-29 9:12 ` Bastien
0 siblings, 0 replies; 95+ messages in thread
From: Bastien @ 2012-09-29 9:12 UTC (permalink / raw)
To: Achim Gratz; +Cc: emacs-orgmode
Achim Gratz <Stromeko@nexgo.de> writes:
> There are some tests that are supposed to have whitespace errors, based
> on the comments in the file, but you've removed them along with all the
> others. I've reverted that hunk of the commit.
Thanks,
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-09-29 7:30 Neuwirth Erich
2012-09-29 7:39 ` Bastien
@ 2012-09-29 9:52 ` Achim Gratz
1 sibling, 0 replies; 95+ messages in thread
From: Achim Gratz @ 2012-09-29 9:52 UTC (permalink / raw)
To: emacs-orgmode
Neuwirth Erich writes:
> Perhaps this is useful information
It would be more useful if the Org version you are trying to make was
included, but since it's probably not installed in lispdir yet, your
installed emacs would show a different version. So I've implemented a
new target `config-version´ to make this easy to produce with make…
org-mode> make config-version
========= Org version
make: Org-mode version 7.9.1 (release_7.9.1-442-g9ab8cb => /usr/local/share/emacs/site-lisp/org)
Regards,
Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk Blofeld]>+
SD adaptation for Waldorf rackAttack V1.04R1:
http://Synth.Stromeko.net/Downloads.html#WaldorfSDada
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-11-07 18:50 Kevin Buchs
0 siblings, 0 replies; 95+ messages in thread
From: Kevin Buchs @ 2012-11-07 18:50 UTC (permalink / raw)
To: Org Mode
I would like to solve a problem I have: C-e (org-end-of-line) does not
move to the end of the line with long lines that are not headings. I
find myself wanting to get to the end of a long line often and have to
hit multiple C-e sequences to get there. I don't have the
org-special-ctrl-a/e set to non-nil. My line-move-visual value is the
default value of t, so I get the end-of-visual-line movement one
screen's worth. Before I start hacking, I thought I should be clear on
the design goals here. It seems as if the declaration of
line-move-visual says it is dealing with vertical motion, not
horizontal motion. I don't see any behavior elsewhere that uses the
interpretation that line-move-visual is for horizontal motion. Anyone
have thoughts on this subject?
BTW - I posted this back in May, but I neglected to keep the topic alive.
Kevin Buchs
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2012-11-11 15:36 Fabrice Popineau
2012-11-11 23:09 ` Nicolas Goaziou
0 siblings, 1 reply; 95+ messages in thread
From: Fabrice Popineau @ 2012-11-11 15:36 UTC (permalink / raw)
To: emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 762 bytes --]
I just updated a few hours ago with the git current version and I now get:
Debugger entered--Lisp error: (invalid-read-syntax "#")
eval-buffer(#<buffer *load*> nil "c:/Home/.org-timestamps/CQP-org.cache"
nil t) ; Reading at buffer position 621
load-with-code-conversion("c:/Home/.org-timestamps/CQP-org.cache"
"c:/Home/.org-timestamps/CQP-org.cache" nil nil)
load("c:/Home/.org-timestamps/CQP-org.cache" nil nil t)
load-file("c:/Home/.org-timestamps/CQP-org.cache")
Actually, the .cache file reads :
...
(puthash "c:/Home/Cours/CQP-ArTech/org/CQP-Artech-slides.org" '(:title
#("CQP-ArTech Slides" 0 17 (:parent (#("CQP-ArTech Slides" 0 17 (:parent
#3)))))) org-e-publish-cache)
...
I guess the #3 is the culprit. Any idea what went wrong?
Fabrice
[-- Attachment #2: Type: text/html, Size: 1077 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-11-11 15:36 Fabrice Popineau
@ 2012-11-11 23:09 ` Nicolas Goaziou
2012-11-12 7:40 ` Fabrice Popineau
0 siblings, 1 reply; 95+ messages in thread
From: Nicolas Goaziou @ 2012-11-11 23:09 UTC (permalink / raw)
To: Fabrice Popineau; +Cc: emacs-orgmode@gnu.org
Hello,
Fabrice Popineau <fabrice.popineau@gmail.com> writes:
> I just updated a few hours ago with the git current version and I now get:
>
> Debugger entered--Lisp error: (invalid-read-syntax "#")
> eval-buffer(#<buffer *load*> nil "c:/Home/.org-timestamps/CQP-org.cache"
> nil t) ; Reading at buffer position 621
> load-with-code-conversion("c:/Home/.org-timestamps/CQP-org.cache"
> "c:/Home/.org-timestamps/CQP-org.cache" nil nil)
> load("c:/Home/.org-timestamps/CQP-org.cache" nil nil t)
> load-file("c:/Home/.org-timestamps/CQP-org.cache")
>
> Actually, the .cache file reads :
>
> ...
> (puthash "c:/Home/Cours/CQP-ArTech/org/CQP-Artech-slides.org" '(:title
> #("CQP-ArTech Slides" 0 17 (:parent (#("CQP-ArTech Slides" 0 17 (:parent
> #3)))))) org-e-publish-cache)
> ...
>
> I guess the #3 is the culprit. Any idea what went wrong?
To sum it up, I added :parent property to each string but org-e-publish
tries to store them in the cache, which is impossible since cache is
eventually written to a file.
I have pushed a fix for that problem. Is it correct now?
Thanks for submitting this.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2012-11-11 23:09 ` Nicolas Goaziou
@ 2012-11-12 7:40 ` Fabrice Popineau
0 siblings, 0 replies; 95+ messages in thread
From: Fabrice Popineau @ 2012-11-12 7:40 UTC (permalink / raw)
To: Nicolas Goaziou; +Cc: emacs-orgmode@gnu.org
[-- Attachment #1: Type: text/plain, Size: 1641 bytes --]
Seems to be ok on my side.
I wonder if my problem could have been triggered by the fact I had a
spurious file in the way of the (new) exporter: I had a foo.org file
exported to some other directory, but also a foo.html in the source
directory that had to be copied to the target directory by another
dependency of the project.
Thanks anyway for taking care of this.
Fabrice
2012/11/12 Nicolas Goaziou <n.goaziou@gmail.com>
> Hello,
>
> Fabrice Popineau <fabrice.popineau@gmail.com> writes:
>
> > I just updated a few hours ago with the git current version and I now
> get:
> >
> > Debugger entered--Lisp error: (invalid-read-syntax "#")
> > eval-buffer(#<buffer *load*> nil
> "c:/Home/.org-timestamps/CQP-org.cache"
> > nil t) ; Reading at buffer position 621
> > load-with-code-conversion("c:/Home/.org-timestamps/CQP-org.cache"
> > "c:/Home/.org-timestamps/CQP-org.cache" nil nil)
> > load("c:/Home/.org-timestamps/CQP-org.cache" nil nil t)
> > load-file("c:/Home/.org-timestamps/CQP-org.cache")
> >
> > Actually, the .cache file reads :
> >
> > ...
> > (puthash "c:/Home/Cours/CQP-ArTech/org/CQP-Artech-slides.org" '(:title
> > #("CQP-ArTech Slides" 0 17 (:parent (#("CQP-ArTech Slides" 0 17 (:parent
> > #3)))))) org-e-publish-cache)
> > ...
> >
> > I guess the #3 is the culprit. Any idea what went wrong?
>
> To sum it up, I added :parent property to each string but org-e-publish
> tries to store them in the cache, which is impossible since cache is
> eventually written to a file.
>
> I have pushed a fix for that problem. Is it correct now?
>
> Thanks for submitting this.
>
>
> Regards,
>
> --
> Nicolas Goaziou
>
[-- Attachment #2: Type: text/html, Size: 2440 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2013-01-15 19:26 Rick Frankel
0 siblings, 0 replies; 95+ messages in thread
From: Rick Frankel @ 2013-01-15 19:26 UTC (permalink / raw)
To: emacs-orgmode
From 8aca214f0aefe3d89162115b9d241766ae62c5c1 Mon Sep 17 00:00:00 2001
From: Rick Frankel <org@rickster.com>
Date: Fri, 11 Jan 2013 13:41:10 -0500
Subject: [PATCH] ob-tangle: Correctly process tangling of single source block
* lisp/ob-tangle.el
(org-babel-tangle):
- remove un-executed attempt to ask user for file-name if
tangling a single block (`:tangle' always has a value)
- change handling of block accumulation
(org-babel-tangle-collect-block): new function to collect a single block
When attempting to tangle a single block, `org-babel-tangle' would use
`narrow-to-region', causing any header arguments not on the
"#+BEGIN_SRC" line to be excluded from the tangled file.
---
lisp/ob-tangle.el | 166 +++++++++++++++++++++++++++++-------------------------
1 file changed, 90 insertions(+), 76 deletions(-)
diff --git a/lisp/ob-tangle.el b/lisp/ob-tangle.el
index 0db4335..725d3af 100644
--- a/lisp/ob-tangle.el
+++ b/lisp/ob-tangle.el
@@ -192,18 +192,16 @@ source blocks. Optional argument LANG can be used to limit the
exported source code blocks by language."
(interactive "P")
(run-hooks 'org-babel-pre-tangle-hook)
- ;; possibly restrict the buffer to the current code block
(save-restriction
- (when only-this-block
- (unless (org-babel-where-is-src-block-head)
- (error "Point is not currently inside of a code block"))
- (save-match-data
- (unless (or (cdr (assoc :tangle (nth 2 (org-babel-get-src-block-info))))
- target-file)
- (setq target-file
- (read-from-minibuffer "Tangle to: " (buffer-file-name)))))
- (narrow-to-region (match-beginning 0) (match-end 0)))
(save-excursion
+ ;; check if tangle restricted to the current code block and
+ ;; move to beginning of block so begin_src line not
+ ;; included in commments
+ (when only-this-block
+ (let ((head (org-babel-where-is-src-block-head)))
+ (if head
+ (goto-char head)
+ (error "Point is not currently inside of a code block"))))
(let ((block-counter 0)
(org-babel-default-header-args
(if target-file
@@ -270,7 +268,9 @@ exported source code blocks by language."
(setq block-counter (+ 1 block-counter))
(add-to-list 'path-collector file-name)))))
specs)))
- (org-babel-tangle-collect-blocks lang))
+ (if only-this-block
+ (org-babel-tangle-collect-block 1 t)
+ (org-babel-tangle-collect-blocks lang)))
(message "Tangled %d code block%s from %s" block-counter
(if (= block-counter 1) "" "s")
(file-name-nondirectory
@@ -353,7 +353,7 @@ Return an association list of source-code block specifications of
the form used by `org-babel-spec-to-string' grouped by language.
Optional argument LANG can be used to limit the collected source
code blocks by language."
- (let ((block-counter 1) (current-heading "") blocks)
+ (let ((block-counter 1) (current-heading "") blocks by-lang)
(org-babel-map-src-blocks (buffer-file-name)
((lambda (new-heading)
(if (not (string= new-heading current-heading))
@@ -366,73 +366,18 @@ code blocks by language."
(or (nth 4 (org-heading-components))
"(dummy for heading without text)")
(error (buffer-file-name)))))
- (let* ((start-line (save-restriction (widen)
- (+ 1 (line-number-at-pos (point)))))
- (file (buffer-file-name))
- (info (org-babel-get-src-block-info 'light))
+ (let* ((info (org-babel-get-src-block-info 'light))
(src-lang (nth 0 info)))
(unless (string= (cdr (assoc :tangle (nth 2 info))) "no")
(unless (and language (not (string= language src-lang)))
- (let* ((info (org-babel-get-src-block-info))
- (params (nth 2 info))
- (link ((lambda (link)
- (and (string-match org-bracket-link-regexp link)
- (match-string 1 link)))
- (org-no-properties
- (org-store-link nil))))
- (source-name
- (intern (or (nth 4 info)
- (format "%s:%d"
- current-heading block-counter))))
- (expand-cmd
- (intern (concat "org-babel-expand-body:" src-lang)))
- (assignments-cmd
- (intern (concat "org-babel-variable-assignments:" src-lang)))
- (body
- ((lambda (body) ;; run the tangle-body-hook
- (with-temp-buffer
- (insert body)
- (run-hooks 'org-babel-tangle-body-hook)
- (buffer-string)))
- ((lambda (body) ;; expand the body in language specific manner
- (if (assoc :no-expand params)
- body
- (if (fboundp expand-cmd)
- (funcall expand-cmd body params)
- (org-babel-expand-body:generic
- body params
- (and (fboundp assignments-cmd)
- (funcall assignments-cmd params))))))
- (if (org-babel-noweb-p params :tangle)
- (org-babel-expand-noweb-references info)
- (nth 1 info)))))
- (comment
- (when (or (string= "both" (cdr (assoc :comments params)))
- (string= "org" (cdr (assoc :comments params))))
- ;; from the previous heading or code-block end
- (funcall
- org-babel-process-comment-text
- (buffer-substring
- (max (condition-case nil
- (save-excursion
- (org-back-to-heading t) ; sets match data
- (match-end 0))
- (error (point-min)))
- (save-excursion
- (if (re-search-backward
- org-babel-src-block-regexp nil t)
- (match-end 0)
- (point-min))))
- (point)))))
- by-lang)
- ;; add the spec for this block to blocks under it's language
- (setq by-lang (cdr (assoc src-lang blocks)))
- (setq blocks (delq (assoc src-lang blocks) blocks))
- (setq blocks (cons
- (cons src-lang
- (cons (list start-line file link
- source-name params body comment)
- by-lang)) blocks)))))))
+ ;; add the spec for this block to blocks under it's language
+ (setq by-lang (cdr (assoc src-lang blocks)))
+ (setq blocks (delq (assoc src-lang blocks) blocks))
+ (setq blocks (cons
+ (cons src-lang
+ (cons
+ (org-babel-tangle-collect-block
+ block-counter) by-lang)) blocks))))))
;; ensure blocks in the correct order
(setq blocks
(mapcar
@@ -440,6 +385,75 @@ code blocks by language."
blocks))
blocks))
+(defun org-babel-tangle-collect-block
+ (block-counter &optional only-this-block)
+ "Collect tangled source for current block.
+Returns list of block attributes needed by
+`org-babel-tangle-collect-blocks'. If ONLY-THIS-BLOCK is set,
+then return full association list in format needed for
+`org-babel-tangle' directly."
+ (let* ((info (org-babel-get-src-block-info))
+ (start-line
+ (save-restriction (widen)
+ (+ 1 (line-number-at-pos (point)))))
+ (file (buffer-file-name))
+ (src-lang (nth 0 info))
+ (params (nth 2 info))
+ (link ((lambda (link)
+ (and (string-match org-bracket-link-regexp link)
+ (match-string 1 link)))
+ (org-no-properties
+ (org-store-link nil))))
+ (source-name
+ (intern (or (nth 4 info)
+ (format "%s:%d" (nth 4 (org-heading-components))
+ block-counter))))
+ (expand-cmd
+ (intern (concat "org-babel-expand-body:" src-lang)))
+ (assignments-cmd
+ (intern (concat "org-babel-variable-assignments:" src-lang)))
+ (body
+ ((lambda (body) ;; run the tangle-body-hook
+ (with-temp-buffer
+ (insert body)
+ (run-hooks 'org-babel-tangle-body-hook)
+ (buffer-string)))
+ ((lambda (body) ;; expand the body in language specific manner
+ (if (assoc :no-expand params)
+ body
+ (if (fboundp expand-cmd)
+ (funcall expand-cmd body params)
+ (org-babel-expand-body:generic
+ body params
+ (and (fboundp assignments-cmd)
+ (funcall assignments-cmd params))))))
+ (if (org-babel-noweb-p params :tangle)
+ (org-babel-expand-noweb-references info)
+ (nth 1 info)))))
+ (comment
+ (when (or (string= "both" (cdr (assoc :comments params)))
+ (string= "org" (cdr (assoc :comments params))))
+ ;; from the previous heading or code-block end
+ (funcall
+ org-babel-process-comment-text
+ (buffer-substring
+ (max (condition-case nil
+ (save-excursion
+ (org-back-to-heading t) ; sets match data
+ (match-end 0))
+ (error (point-min)))
+ (save-excursion
+ (if (re-search-backward
+ org-babel-src-block-regexp nil t)
+ (match-end 0)
+ (point-min))))
+ (point)))))
+ (result
+ (list start-line file link source-name params body comment)))
+ (if only-this-block
+ (list (cons src-lang (list result)))
+ result)))
+
(defun org-babel-tangle-comment-links ( &optional info)
"Return a list of begin and end link comments for the code block at point."
(let* ((start-line (org-babel-where-is-src-block-head))
--
1.8.0
^ permalink raw reply related [flat|nested] 95+ messages in thread
* (no subject)
@ 2013-01-24 12:11 Herbert Sitz
0 siblings, 0 replies; 95+ messages in thread
From: Herbert Sitz @ 2013-01-24 12:11 UTC (permalink / raw)
To: noel, nonka1717, nonaadams, PDR, molver, orderhelp, emacs-orgmode,
pariss, patricks
http://hickorystreetlounge.com/wp-content/plugins/zajvtixgeoo/yahool321.php
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2013-01-29 9:43 Martin Beck
2013-01-30 12:12 ` Bernt Hansen
0 siblings, 1 reply; 95+ messages in thread
From: Martin Beck @ 2013-01-29 9:43 UTC (permalink / raw)
To: emacs orgmode-mailinglist
[-- Attachment #1: Type: text/html, Size: 772 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-01-29 9:43 Martin Beck
@ 2013-01-30 12:12 ` Bernt Hansen
0 siblings, 0 replies; 95+ messages in thread
From: Bernt Hansen @ 2013-01-30 12:12 UTC (permalink / raw)
To: Martin Beck; +Cc: emacs orgmode-mailinglist
"Martin Beck" <elwood151@web.de> writes:
> I'm trying to create a custom agenda setup for my org-mode and I wonder how I can sort the agenda-items by date (Scheduled
> or deadline): newest first.
>
> I only found time-up / time-down in the parameters, but that does not seem to do what I need.
>
> Another important point would be how to handle items with no scheduled/date or deadline.. they should be placed at the end
> of the list.
>
> I've been searching some time but did not find a solution. :-(
Hi Martin,
I sort my daily agenda items specifically using a bunch of complicated
sorting functions. They are all documented here:
http://doc.norang.ca/org-mode.html#AgendaViewTweaks
HTH,
Bernt
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2013-03-03 0:55 Vikas Rawal
0 siblings, 0 replies; 95+ messages in thread
From: Vikas Rawal @ 2013-03-03 0:55 UTC (permalink / raw)
To: emacs-orgmode
>
> You may be using an outdated version (maint branch?). Otherwise, latex
> back-end may not be loaded, but it is by default (see
> `org-export-backends').
I am using 7.9.3f updated using orgmode elpa repository. Is that a
problem?
Vikas
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 10:39 ` was: " Andreas Röhler
@ 2013-03-08 10:46 ` Bastien
2013-03-08 10:59 ` Andreas Röhler
0 siblings, 1 reply; 95+ messages in thread
From: Bastien @ 2013-03-08 10:46 UTC (permalink / raw)
To: Andreas Röhler; +Cc: emacs-orgmode
Hi Andreas,
Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
> BTW does that mean, stars are hard-coded in a way, they can't be
> replaced by another car?
Yes, this is the case.
> If yes, what about to keep the core more abstract?
This is a hard problem and I personally don't think it's worth
tackling it. But I don't want to decourage anyone, of course :)
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 10:46 ` (no subject) Bastien
@ 2013-03-08 10:59 ` Andreas Röhler
2013-03-08 11:05 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Andreas Röhler @ 2013-03-08 10:59 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
Am 08.03.2013 11:46, schrieb Bastien:
> Hi Andreas,
>
> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>
>> BTW does that mean, stars are hard-coded in a way, they can't be
>> replaced by another car?
>
> Yes, this is the case.
>
>> If yes, what about to keep the core more abstract?
>
> This is a hard problem
Hi Bastien,
can it be more difficult than related use of comment-start?
[ ... ]
Cheers,
Andreas
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 10:59 ` Andreas Röhler
@ 2013-03-08 11:05 ` Bastien
2013-03-08 11:18 ` Andreas Röhler
0 siblings, 1 reply; 95+ messages in thread
From: Bastien @ 2013-03-08 11:05 UTC (permalink / raw)
To: Andreas Röhler; +Cc: emacs-orgmode
Hi Andreas,
Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
> can it be more difficult than related use of comment-start?
Yes -- check this FAQ:
http://orgmode.org/worg/org-faq.html#sec-8-12
HTH,
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 11:05 ` Bastien
@ 2013-03-08 11:18 ` Andreas Röhler
2013-03-08 11:23 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Andreas Röhler @ 2013-03-08 11:18 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
Am 08.03.2013 12:05, schrieb Bastien:
> Hi Andreas,
>
> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>
>> can it be more difficult than related use of comment-start?
>
> Yes -- check this FAQ:
> http://orgmode.org/worg/org-faq.html#sec-8-12
>
> HTH,
>
Thanks, still non-believing :)
(defcustom outline-regexp "[*\^L]+"
"Regular expression to match the beginning of a heading.
Any line whose beginning matches this regexp is considered to start a heading.
Note that Outline mode only checks this regexp at the start of a line,
so the regexp need not (and usually does not) start with `^'.
The recommended way to set this is with a Local Variables: list
in the file it applies to. See also `outline-heading-end-regexp'."
:type 'regexp
:group 'outlines)
IMHO remains to make that buffer-local and use outline-regexp from inside org-mode.
Andreas
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 11:18 ` Andreas Röhler
@ 2013-03-08 11:23 ` Bastien
2013-03-08 13:00 ` Andreas Röhler
0 siblings, 1 reply; 95+ messages in thread
From: Bastien @ 2013-03-08 11:23 UTC (permalink / raw)
To: Andreas Röhler; +Cc: emacs-orgmode
Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
> IMHO remains to make that buffer-local and use outline-regexp from
> inside org-mode.
Have a go and let us know :)
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 11:23 ` Bastien
@ 2013-03-08 13:00 ` Andreas Röhler
2013-03-08 13:12 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Andreas Röhler @ 2013-03-08 13:00 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 265 bytes --]
Am 08.03.2013 12:23, schrieb Bastien:
> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>
>> IMHO remains to make that buffer-local and use outline-regexp from
>> inside org-mode.
>
> Have a go and let us know :)
>
That should work already - to start with.
[-- Attachment #2: org-heading-char.patch --]
[-- Type: text/x-patch, Size: 1194 bytes --]
commit 8cf6bc6faeb2a3b3fec0780e56a04ef0e13c3c62
Author: Andreas Roehler <andreas.roehler@online.de>
Date: Fri Mar 8 13:58:13 2013 +0100
Enable different heading chars, not just `*'
Use variable `org-heading-char', customizable later on,
instead of hard-coded `*'
TINYCHANGE
diff --git a/lisp/org.el b/lisp/org.el
index 811506a..2db63ae 100644
--- a/lisp/org.el
+++ b/lisp/org.el
@@ -90,13 +90,17 @@
;; `org-outline-regexp'. The only function still directly relying on
;; `outline-regexp' is `org-overview' so that `org-cycle' can do its
;; job when `orgstruct-mode' is active.
+(defvar org-heading-char "*")
+
(defvar org-outline-regexp "\\*+ "
"Regexp to match Org headlines.")
+(setq org-outline-regexp (concat (regexp-quote org-heading-char) "+ "))
(defvar org-outline-regexp-bol "^\\*+ "
"Regexp to match Org headlines.
This is similar to `org-outline-regexp' but additionally makes
sure that we are at the beginning of the line.")
+(setq org-outline-regexp-bol (concat "^" (regexp-quote org-heading-char) "+ "))
(defvar org-heading-regexp "^\\(\\*+\\)\\(?: +\\(.*?\\)\\)?[ \t]*$"
"Matches a headline, putting stars and text into groups.
^ permalink raw reply related [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 13:00 ` Andreas Röhler
@ 2013-03-08 13:12 ` Bastien
2013-03-08 15:22 ` Andreas Röhler
0 siblings, 1 reply; 95+ messages in thread
From: Bastien @ 2013-03-08 13:12 UTC (permalink / raw)
To: Andreas Röhler; +Cc: emacs-orgmode
Hi Andreas,
Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
> Am 08.03.2013 12:23, schrieb Bastien:
>> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>>
>>> IMHO remains to make that buffer-local and use outline-regexp from
>>> inside org-mode.
>>
>> Have a go and let us know :)
>
> That should work already - to start with.
Sorry, I should not let you go into that direction without a warning
that I won't commit anything related to this myself.
Btw, did you read the thread as the FAQ suggests?
One reason why the stars are hardcoded (like the comment characters
and other syntactic elements) is that Org files are used outside Emacs
and allowing users to use something else here is calling for trouble.
So -- just to let you know that it's fine playing with the idea and
providing proof-of-concept patches, but there are many reasons why
this cannot be considered.
Also, we are trying to focus on 8.0 right now... help welcome!
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 13:12 ` Bastien
@ 2013-03-08 15:22 ` Andreas Röhler
2013-03-08 15:40 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Andreas Röhler @ 2013-03-08 15:22 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
Am 08.03.2013 14:12, schrieb Bastien:
> Hi Andreas,
>
> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>
>> Am 08.03.2013 12:23, schrieb Bastien:
>>> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>>>
>>>> IMHO remains to make that buffer-local and use outline-regexp from
>>>> inside org-mode.
>>>
>>> Have a go and let us know :)
>>
>> That should work already - to start with.
>
> Sorry, I should not let you go into that direction without a warning
> that I won't commit anything related to this myself.
>
Hi Bastien,
don't worry, didn't expect that for now or soon.
> Btw, did you read the thread as the FAQ suggests?
Nothing different resp. new so far. Let's stress that solution in mind also would be quite simple.
See the example patch.
No-one would be compelled to change the default BTW, it would just open the possibility.
>
> One reason why the stars are hardcoded (like the comment characters
> and other syntactic elements) is that Org files are used outside Emacs
> and allowing users to use something else here is calling for trouble.
>
Hmm, AFAIS trouble might occur only if someone tries to load a non-default --i.e. not-starred--
org-file while the default is active.
But even then it's quite easy to write a guess, which might start if org-mode didn't encounter the
stars where expected.
[ ... ]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 15:22 ` Andreas Röhler
@ 2013-03-08 15:40 ` Bastien
2013-03-08 20:39 ` T.F. Torrey
0 siblings, 1 reply; 95+ messages in thread
From: Bastien @ 2013-03-08 15:40 UTC (permalink / raw)
To: Andreas Röhler; +Cc: emacs-orgmode
Hi Andreas,
Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
> Hmm, AFAIS trouble might occur only if someone tries to load a
> non-default --i.e. not-starred-- org-file while the default is
> active.
... or if someone shares a file online using non-star character
as the prefix for headlines: this file won't be processed by
Org tools like org-ruby and the like.
> But even then it's quite easy to write a guess, which might start if
> org-mode didn't encounter the stars where expected.
Org files are not just for Emacs, that's were the problem lies...
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 15:40 ` Bastien
@ 2013-03-08 20:39 ` T.F. Torrey
2013-03-08 21:19 ` Nicolas Goaziou
2013-03-09 14:09 ` Bastien
0 siblings, 2 replies; 95+ messages in thread
From: T.F. Torrey @ 2013-03-08 20:39 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
Hello,
Bastien <bzg@altern.org> writes:
> Hi Andreas,
>
> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>
>> Hmm, AFAIS trouble might occur only if someone tries to load a
>> non-default --i.e. not-starred-- org-file while the default is
>> active.
>
> ... or if someone shares a file online using non-star character
> as the prefix for headlines: this file won't be processed by
> Org tools like org-ruby and the like.
>
>> But even then it's quite easy to write a guess, which might start if
>> org-mode didn't encounter the stars where expected.
>
> Org files are not just for Emacs, that's were the problem lies...
I don't understand this heavy-handed approach.
Plain text is great because I can do whatever I want. What I come up
with might not work correctly in other tools (or anything at all), but I
have the freedom to do interesting things, and to have my files look
just the way I want them to.
Emacs is great because it allows me the freedom of near-infinite
customization. It has sensible defaults, but it allows me to break
things however I want.
Org, on the other hand, seems to be moving away from that in many ways.
Headlines must start with stars because I might someday post something
on the web and it wouldn't work for someone else? Other tools might not
recognize my file correctly? A developer of some other tool might
someday have a problem? These are not good reasons for limiting what I
can do with my own Org files.
I don't need or want supervision in how I create my files. I want
freedom. If I wanted supervision, I wouldn't be using Emacs. Have you
seen the lisp posted to the web? Somehow, Emacs and I survive that.
Org started as a great tool that let me do cool things with my text
files. I don't want to see it change to a rigid format for me to force
my files into, where my only options are conform or leave.
Org should err on the side of user freedom.
IMHO,
Terry
--
T.F. Torrey
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 20:39 ` T.F. Torrey
@ 2013-03-08 21:19 ` Nicolas Goaziou
2013-03-08 21:57 ` Suvayu Ali
2013-03-09 14:09 ` Bastien
1 sibling, 1 reply; 95+ messages in thread
From: Nicolas Goaziou @ 2013-03-08 21:19 UTC (permalink / raw)
To: T.F. Torrey; +Cc: Bastien, emacs-orgmode
Hello,
tftorrey@tftorrey.com (T.F. Torrey) writes:
> Hello,
>
> Bastien <bzg@altern.org> writes:
>
>> Hi Andreas,
>>
>> Andreas Röhler <andreas.roehler@easy-emacs.de> writes:
>>
>>> Hmm, AFAIS trouble might occur only if someone tries to load a
>>> non-default --i.e. not-starred-- org-file while the default is
>>> active.
>>
>> ... or if someone shares a file online using non-star character
>> as the prefix for headlines: this file won't be processed by
>> Org tools like org-ruby and the like.
>>
>>> But even then it's quite easy to write a guess, which might start if
>>> org-mode didn't encounter the stars where expected.
>>
>> Org files are not just for Emacs, that's were the problem lies...
>
> I don't understand this heavy-handed approach.
>
> Plain text is great because I can do whatever I want. What I come up
> with might not work correctly in other tools (or anything at all), but I
> have the freedom to do interesting things, and to have my files look
> just the way I want them to.
>
> Emacs is great because it allows me the freedom of near-infinite
> customization. It has sensible defaults, but it allows me to break
> things however I want.
>
> Org, on the other hand, seems to be moving away from that in many ways.
> Headlines must start with stars because I might someday post something
> on the web and it wouldn't work for someone else? Other tools might not
> recognize my file correctly? A developer of some other tool might
> someday have a problem? These are not good reasons for limiting what I
> can do with my own Org files.
>
> I don't need or want supervision in how I create my files. I want
> freedom. If I wanted supervision, I wouldn't be using Emacs. Have you
> seen the lisp posted to the web? Somehow, Emacs and I survive that.
>
> Org started as a great tool that let me do cool things with my text
> files. I don't want to see it change to a rigid format for me to force
> my files into, where my only options are conform or leave.
>
I disagree.
Org is a plain text format. Like any format, plain-text or not, it needs
a proper definition. At least, it helps users and developers to agree on
what they are talking about. As for myself, I cannot play any game if
I don't know its rules.
My point of view is the following: Org (as a format) definition
shouldn't depend on Emacs. It should be totally parseable by any
language (which is not the case actually, since syntax relies on
variables defined in Emacs). IOW, we should work to make it a real
plain-text markup format.
> Org should err on the side of user freedom.
You still have the freedom to choose what you write down in Org format.
You have the freedom use, or to not use Org. You have the freedom to
modify Org code to bend it to your will. IMO, freedom is totally
unrelated to this subject.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 21:19 ` Nicolas Goaziou
@ 2013-03-08 21:57 ` Suvayu Ali
0 siblings, 0 replies; 95+ messages in thread
From: Suvayu Ali @ 2013-03-08 21:57 UTC (permalink / raw)
To: emacs-orgmode
Hi,
On Fri, Mar 08, 2013 at 10:19:56PM +0100, Nicolas Goaziou wrote:
> tftorrey@tftorrey.com (T.F. Torrey) writes:
> >
> > Org, on the other hand, seems to be moving away from that in many ways.
> > Headlines must start with stars because I might someday post something
> > on the web and it wouldn't work for someone else? Other tools might not
> > recognize my file correctly? A developer of some other tool might
> > someday have a problem? These are not good reasons for limiting what I
> > can do with my own Org files.
[...]
> My point of view is the following: Org (as a format) definition
> shouldn't depend on Emacs. It should be totally parseable by any
> language (which is not the case actually, since syntax relies on
> variables defined in Emacs). IOW, we should work to make it a real
> plain-text markup format.
This discussion comes up again and again over the years. Every time the
conclusion has been, there are many who want to use other characters
instead of a star but the rational is always cosmetic. And in the end
people end up agreeing it is not worth the pain.
To give you an example of breakage, after long whining github started
supporting org file formatting for READMEs via org-ruby (even source
blocks I think!). Do you expect we can have similar support if
something as fundamental as the headline is not well defined? Other
possible breakages could be in org-merge-driver, VimOrganizer, org-sync,
some of the collaborative editing projects that have been spawning, and
the list goes on ...
FWIW, assuming that the rational behind this feature request is
cosmetic, there was a proposal to implement this as overlays. So the
file still uses *-s but a user can customise how they are displayed. I
think this addresses almost all requests in this category (majority
being "I want really cool UTF characters instead of boring old
asterisk"). If someone is interested in implementing this, I'm pretty
sure the maintainers would give that a serious consideration for
inclusion. Changing the file format on the other hand is a no go
amongst many of the users (myself included) and developers alike.
Hope my 2¢ shed some light on the implications of a change like this.
Cheers,
--
Suvayu
Open source is the future. It sets us free.
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-08 20:39 ` T.F. Torrey
2013-03-08 21:19 ` Nicolas Goaziou
@ 2013-03-09 14:09 ` Bastien
2013-03-10 22:40 ` T.F. Torrey
1 sibling, 1 reply; 95+ messages in thread
From: Bastien @ 2013-03-09 14:09 UTC (permalink / raw)
To: T.F. Torrey; +Cc: emacs-orgmode
Hi Terry,
I hear you. I completely agree that Org should not be less flexible
than it has been so far. At least not for very good reasons, shared
by both the developers and the users. IOW: ease of maintainance and
code consistency should not let us introduce rigidity for the users.
Let's focus on the regressions and let's try to fix the ones that we
can fix.
As discussions have shown so far, Nicolas holds the keys when it comes
to honoring Org's consistency regarding its syntax -- the document he
wrote will help us all to speak about the same syntax and rules. But
as you may have felt, I'm more on the "user conveniency" side, even if
we need to sacrifice some consistency. There is a balance here, and I
hope we keep a good one.
So as I said: let's focus on what you perceive as regressions wrt what
Org allows.
The subject of this thread does not fall in this category: headlines
have always been starting with stars, there is no regression here. On
the contrary: a few years ago, we had no answer to this FAQ, now we
can help users with several solution when the problem is aesthetic.
Finally, I agree with Suvayu that the problem *is* mostly aesthetic,
so the solutions we provide are enough (i.e., the FAQ, org-bullets.el
in contrib/.) The question is rather whether we should have an Org
option in core to allow users to tweak the appearance of the stars:
my answer here is "no", because I don't see why users would stop here.
Once we offer such an option for headlines, why not for comments and
other characters with a syntactic role? (I replied a question on
stackoverflow on how to use "%" instead of "#" for comments...)
Anyway -- Org still stands on the side of users' freedom, let's
fix the real regressions.
Thanks!
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-03-09 14:09 ` Bastien
@ 2013-03-10 22:40 ` T.F. Torrey
0 siblings, 0 replies; 95+ messages in thread
From: T.F. Torrey @ 2013-03-10 22:40 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
Thank you for your thoughtful reply. -- T.
Bastien <bzg@altern.org> writes:
> Hi Terry,
>
> I hear you. I completely agree that Org should not be less flexible
> than it has been so far. At least not for very good reasons, shared
> by both the developers and the users. IOW: ease of maintainance and
> code consistency should not let us introduce rigidity for the users.
>
> Let's focus on the regressions and let's try to fix the ones that we
> can fix.
>
> As discussions have shown so far, Nicolas holds the keys when it comes
> to honoring Org's consistency regarding its syntax -- the document he
> wrote will help us all to speak about the same syntax and rules. But
> as you may have felt, I'm more on the "user conveniency" side, even if
> we need to sacrifice some consistency. There is a balance here, and I
> hope we keep a good one.
>
> So as I said: let's focus on what you perceive as regressions wrt what
> Org allows.
>
> The subject of this thread does not fall in this category: headlines
> have always been starting with stars, there is no regression here. On
> the contrary: a few years ago, we had no answer to this FAQ, now we
> can help users with several solution when the problem is aesthetic.
>
> Finally, I agree with Suvayu that the problem *is* mostly aesthetic,
> so the solutions we provide are enough (i.e., the FAQ, org-bullets.el
> in contrib/.) The question is rather whether we should have an Org
> option in core to allow users to tweak the appearance of the stars:
> my answer here is "no", because I don't see why users would stop here.
> Once we offer such an option for headlines, why not for comments and
> other characters with a syntactic role? (I replied a question on
> stackoverflow on how to use "%" instead of "#" for comments...)
>
> Anyway -- Org still stands on the side of users' freedom, let's
> fix the real regressions.
>
> Thanks!
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-10-11 20:35 ` Samuel Wales
@ 2013-10-14 8:46 ` Martin Beck
0 siblings, 0 replies; 95+ messages in thread
From: Martin Beck @ 2013-10-14 8:46 UTC (permalink / raw)
To: emacs-orgmode
Samuel Wales <samologist <at> gmail.com> writes:
> (setq org-agenda-inactive-leader "Inactive: ")
> (setq org-agenda-include-inactive-timestamps t)
>
> Custom command:
>
> ("ip" "past 7d"
> ;; faster than tags
> agenda ""
> ((org-agenda-start-day "-7d")
> (org-agenda-span 7)
> (org-agenda-repeating-timestamp-show-all nil)
> ;; %s is only for agenda views
> ;; (org-agenda-prefix-format "%s")
> ;; maybe not make much difference ka
> ;; (org-agenda-use-tag-inheritance nil)
> ))
>
> ===
>
> Samuel
>
great - thanks a lot. I'll test that for some time, but it seems to do what
I need.
Just the list created is very long.
Would it be possible to limit it to inactive timestamps only?
Martin
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2013-11-06 6:13 Cecil Westerhof
2013-11-06 8:32 ` Bastien
2013-11-06 8:42 ` Bastien
0 siblings, 2 replies; 95+ messages in thread
From: Cecil Westerhof @ 2013-11-06 6:13 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 2417 bytes --]
At the moment I get something like this:
* Hours Today
#+BEGIN: clocktable :maxlevel 2 :scope subtree
Clock summary at [2013-11-04 Mon 15:53]
| Headline | Time | |
|-------------------------------+--------+------|
| *Total time* | *6:35* | |
|-------------------------------+--------+------|
| Hours Today | 6:35 | |
| Workshop shell scripting | | 2:12 |
| Security Intake | | 2:39 |
| Internal Project | | 1:44 |
#+END:
*** Workshop shell scripting
CLOCK: [2013-11-04 Mon 13:49]--[2013-11-04 Mon 13:56] => 0:07
CLOCK: [2013-11-04 Mon 11:03]--[2013-11-04 Mon 11:55] => 0:52
CLOCK: [2013-11-04 Mon 08:45]--[2013-11-04 Mon 09:58] => 1:13
*** Security Intake
CLOCK: [2013-11-04 Mon 15:05]--[2013-11-04 Mon 15:45] => 0:40
CLOCK: [2013-11-04 Mon 13:56]--[2013-11-04 Mon 14:01] => 0:05
CLOCK: [2013-11-04 Mon 11:55]--[2013-11-04 Mon 13:49] => 1:54
*** Internal Project
CLOCK: [2013-11-04 Mon 14:26]--[2013-11-04 Mon 15:05] => 0:39
CLOCK: [2013-11-04 Mon 09:58]--[2013-11-04 Mon 11:03] => 1:05
But because ‘Hours Today’ already is a summation, I would like to get
something like this:
* Hours Today
#+BEGIN: clocktable :maxlevel 2 :scope subtree
Clock summary at [2013-11-04 Mon 15:53]
|-------------------------------+--------+------|
| Hours Today | 6:35 | |
|-------------------------------+--------+------|
| Workshop shell scripting | | 2:12 |
| Security Intake | | 2:39 |
| Internal Project | | 1:44 |
|-------------------------------+--------+------|
#+END:
*** Workshop shell scripting
CLOCK: [2013-11-04 Mon 13:49]--[2013-11-04 Mon 13:56] => 0:07
CLOCK: [2013-11-04 Mon 11:03]--[2013-11-04 Mon 11:55] => 0:52
CLOCK: [2013-11-04 Mon 08:45]--[2013-11-04 Mon 09:58] => 1:13
*** Security Intake
CLOCK: [2013-11-04 Mon 15:05]--[2013-11-04 Mon 15:45] => 0:40
CLOCK: [2013-11-04 Mon 13:56]--[2013-11-04 Mon 14:01] => 0:05
CLOCK: [2013-11-04 Mon 11:55]--[2013-11-04 Mon 13:49] => 1:54
*** Internal Project
CLOCK: [2013-11-04 Mon 14:26]--[2013-11-04 Mon 15:05] => 0:39
CLOCK: [2013-11-04 Mon 09:58]--[2013-11-04 Mon 11:03] => 1:05
Is that possible?
--
Cecil Westerhof
[-- Attachment #2: Type: text/html, Size: 3003 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-11-06 6:13 Cecil Westerhof
@ 2013-11-06 8:32 ` Bastien
2013-11-06 8:42 ` Bastien
1 sibling, 0 replies; 95+ messages in thread
From: Bastien @ 2013-11-06 8:32 UTC (permalink / raw)
To: Cecil Westerhof; +Cc: emacs-orgmode
Cecil Westerhof <cldwesterhof@gmail.com> writes:
> Is that possible?
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2013-11-06 6:13 Cecil Westerhof
2013-11-06 8:32 ` Bastien
@ 2013-11-06 8:42 ` Bastien
[not found] ` <CAG-LmmDGaczy8pyeCTU6-YJ9oTBeEufqU6kC2PUb-U6ucexhZA@mail.gmail.com>
1 sibling, 1 reply; 95+ messages in thread
From: Bastien @ 2013-11-06 8:42 UTC (permalink / raw)
To: Cecil Westerhof; +Cc: emacs-orgmode
Hi Cecil,
Cecil Westerhof <cldwesterhof@gmail.com> writes:
> Is that possible?
Well, I'd simply not use a "Hours spent" headline, which seems
redundant.
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
[not found] ` <CAG-LmmDFjqbuqfF1YJoeX6x_UdujK+0noeFcGSD15hs49Tbo=Q@mail.gmail.com>
@ 2013-11-06 18:38 ` Cecil Westerhof
0 siblings, 0 replies; 95+ messages in thread
From: Cecil Westerhof @ 2013-11-06 18:38 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 690 bytes --]
2013/11/6 Cecil Westerhof <cldwesterhof@gmail.com>
> > I would like to keep things in the three "Hours Today". Is there a
>
>> > way to get something like:
>> > | Headline | Time |
>> > |-------------------------------+--------|
>> > | *Total time* | *6:35* |
>> > |-------------------------------+--------|
>> > | Workshop shell scripting | 2:12 |
>> > | Security Intake | 2:39 |
>> > | Internal Project | 1:44 |
>>
>> No.
>
>
> OK. I'll have to live with it, or make a workaround.
>
I solved it with:
#+BEGIN: clocktable :maxlevel 1 :scope nil :compact nil
And using narrow-region.
--
Cecil Westerhof
[-- Attachment #2: Type: text/html, Size: 1400 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2014-01-30 0:03 Ken Okada
2014-01-30 0:15 ` Bastien
0 siblings, 1 reply; 95+ messages in thread
From: Ken Okada @ 2014-01-30 0:03 UTC (permalink / raw)
To: emacs-orgmode
Hello,
I have a question. By default tables are centered in LaTeX export.
Sometimes I prefere to make it flush left or right. I thought this was
done with, for example,
#+ATTR_LATEX: :center nil
| a | b |
| 1 | 2 |
but it does not work in my environment. I'm using Org-mode version 7.8.11.
Could anyone point out what I mistook?
Sincerely,
Ken Okada
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-01-30 0:03 Ken Okada
@ 2014-01-30 0:15 ` Bastien
2014-01-30 0:22 ` John Hendy
0 siblings, 1 reply; 95+ messages in thread
From: Bastien @ 2014-01-30 0:15 UTC (permalink / raw)
To: Ken Okada; +Cc: emacs-orgmode
Hi Ken,
Ken Okada <keno.ss57@gmail.com> writes:
> I have a question. By default tables are centered in LaTeX export.
> Sometimes I prefere to make it flush left or right. I thought this was
> done with, for example,
>
> #+ATTR_LATEX: :center nil
> | a | b |
> | 1 | 2 |
The use of the :center parameter suggests you consulted a recent
version of the documentation, for Org >=8.0.
This is how it works for Org 8.0 and above:
#+ATTR_LATEX: :environment longtable :align l|lp{3cm}r|l
| a | b | c |
| 1 | 2 | 3 |
If you can, please upgrade. Otherwise, someone needs to check the
documentation for Org 7.8.11...
HTH,
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-01-30 0:15 ` Bastien
@ 2014-01-30 0:22 ` John Hendy
2014-01-30 7:17 ` Ken Okada
0 siblings, 1 reply; 95+ messages in thread
From: John Hendy @ 2014-01-30 0:22 UTC (permalink / raw)
To: Bastien; +Cc: Ken Okada, emacs-orgmode
On Wed, Jan 29, 2014 at 6:15 PM, Bastien <bzg@gnu.org> wrote:
>
> Hi Ken,
>
> Ken Okada <keno.ss57@gmail.com> writes:
>
> > I have a question. By default tables are centered in LaTeX export.
> > Sometimes I prefere to make it flush left or right. I thought this was
> > done with, for example,
> >
> > #+ATTR_LATEX: :center nil
> > | a | b |
> > | 1 | 2 |
>
> The use of the :center parameter suggests you consulted a recent
> version of the documentation, for Org >=8.0.
>
> This is how it works for Org 8.0 and above:
>
> #+ATTR_LATEX: :environment longtable :align l|lp{3cm}r|l
> | a | b | c |
> | 1 | 2 | 3 |
>
> If you can, please upgrade. Otherwise, someone needs to check the
> documentation for Org 7.8.11...
Bastien beat me to it. Yes, the example syntax is for Org > 8.0.
Here's a version of the manual for v7.9:
- http://www.gnu.org/software/emacs/manual/html_mono/org.html#Tables-in-LaTeX-export
I'm not sure what the proper argument is and can't test since I'm on
the current version of Org from git. You might take a look at the
placement= argument?
I'm having a tough time finding info on LaTeX with what makes a table
left or right aligned (not the columns, but the table itself). Most of
the hits are on how to *center* the table, which seems to suggest they
will be left aligned by default.
Sorry not to be of better help -- I think Bastien's suggestion to
upgrade to 8.0 is the right move. A lot of the mailing list has likely
made the move and thus it's hard to troubleshoot versions with the old
exporter syntax.
Best regards,
John
>
> HTH,
>
> --
> Bastien
>
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-01-30 0:22 ` John Hendy
@ 2014-01-30 7:17 ` Ken Okada
2014-01-31 6:29 ` John Hendy
0 siblings, 1 reply; 95+ messages in thread
From: Ken Okada @ 2014-01-30 7:17 UTC (permalink / raw)
To: John Hendy; +Cc: Bastien, emacs-orgmode
John,
Thanks for advising.
On Org 7.8.11, placement=[l] and placement={l} parameter does not make
sense for tables as I tried.
I tried to install the current version. (There was a compile error
arising from the fact that BSD make is not GNU make, but it's no matter.)
A simple example for :center nil works well. For main org file I have to
do more work... not about centering.
However there seems not to be a parameter for flush right. At present
this is not a serious problem because :center nil works well, so we can
control directory with #+LATEX: \begin ... and \end . But it's tiresome.
I also feel something about the difference between the way to designate
centering and flush left/right. For HTML export we use :align parameter;
for LaTeX, :center parameter, which only allows us to control centering
or not. :align parameter is used for alignment of contents of table.
I'm confused. I guess there's a problem about backward compatibility or
something.
As you wrote there's a way to change default behaviour, but I feel
centering is confortable in the most typesetting *with Org*.
I think such searching result is due to the default behaviour of LaTeX.
File local option switching the behaviour would be useful, I think.
Best regards,
Ken Okada
At Wed, 29 Jan 2014 18:22:38 -0600,
John Hendy wrote:
>
> On Wed, Jan 29, 2014 at 6:15 PM, Bastien <bzg@gnu.org> wrote:
> >
> > Hi Ken,
> >
> > Ken Okada <keno.ss57@gmail.com> writes:
> >
> > > I have a question. By default tables are centered in LaTeX export.
> > > Sometimes I prefere to make it flush left or right. I thought this was
> > > done with, for example,
> > >
> > > #+ATTR_LATEX: :center nil
> > > | a | b |
> > > | 1 | 2 |
> >
> > The use of the :center parameter suggests you consulted a recent
> > version of the documentation, for Org >=8.0.
> >
> > This is how it works for Org 8.0 and above:
> >
> > #+ATTR_LATEX: :environment longtable :align l|lp{3cm}r|l
> > | a | b | c |
> > | 1 | 2 | 3 |
> >
> > If you can, please upgrade. Otherwise, someone needs to check the
> > documentation for Org 7.8.11...
>
> Bastien beat me to it. Yes, the example syntax is for Org > 8.0.
> Here's a version of the manual for v7.9:
> - http://www.gnu.org/software/emacs/manual/html_mono/org.html#Tables-in-LaTeX-export
>
> I'm not sure what the proper argument is and can't test since I'm on
> the current version of Org from git. You might take a look at the
> placement= argument?
>
> I'm having a tough time finding info on LaTeX with what makes a table
> left or right aligned (not the columns, but the table itself). Most of
> the hits are on how to *center* the table, which seems to suggest they
> will be left aligned by default.
>
> Sorry not to be of better help -- I think Bastien's suggestion to
> upgrade to 8.0 is the right move. A lot of the mailing list has likely
> made the move and thus it's hard to troubleshoot versions with the old
> exporter syntax.
>
>
> Best regards,
> John
>
> >
> > HTH,
> >
> > --
> > Bastien
> >
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-01-30 7:17 ` Ken Okada
@ 2014-01-31 6:29 ` John Hendy
2014-01-31 7:11 ` Nick Dokos
0 siblings, 1 reply; 95+ messages in thread
From: John Hendy @ 2014-01-31 6:29 UTC (permalink / raw)
To: Ken Okada; +Cc: Bastien, emacs-orgmode
On Thu, Jan 30, 2014 at 1:17 AM, Ken Okada <keno.ss57@gmail.com> wrote:
> John,
>
> Thanks for advising.
>
> On Org 7.8.11, placement=[l] and placement={l} parameter does not make
> sense for tables as I tried.
>
> I tried to install the current version. (There was a compile error
> arising from the fact that BSD make is not GNU make, but it's no matter.)
> A simple example for :center nil works well. For main org file I have to
> do more work... not about centering.
If you're still running into the make issue, this is how I manage
Org-git on Windows since I don't want to futz with cygwin or other
stuff:
- http://orgmode.org/worg/org-hacks.html#compiling-org-without-make
> However there seems not to be a parameter for flush right. At present
> this is not a serious problem because :center nil works well, so we can
> control directory with #+LATEX: \begin ... and \end . But it's tiresome.
I was hunting around for the LaTeX parameter directly to specify the
table alignment and honestly wasn't finding anything specifically
related to tabular. My best hunting suggests that you need to put the
table inside of some sort of float environment and then specify the
placement that way, but I'm not sure if this plays nicely with any of
Org's built in table environments or not.
For example, I see there's a way to specify right alignment when
trying to wrap text around a figure:
- http://en.wikibooks.org/wiki/LaTeX/Floats,_Figures_and_Captions#Wrapping_text_around_figures
I was able to do this successfully with tabular instead of the example
they showed, but if you have no text to wrap, the table will just be
left-aligned.
\begin{wrapfigure}{r}{0.5\textwidth}
\begin{tabular}{lll}
a & b & c \\
\hline
word & word & word \\
word & word & word \\
\end{tabular}
\end{wrapfigure}
I also don't know how to next multiple environments with Org's
#+attr_latex options. I was able to place it inside wrap figure like
so:
#+attr_latex: :environment wrapfigure
| a | b | c |
|------+------+------|
| word | word | word |
| word | word | word |
But one still needs a \begin/end{tabular} wrapped around the table. I
tried the obvious =:environment wrapfigure tabular=, but this creates
the literal set of words inside \begin{} vs. separate environments.
That's the best I can do for now...
Good luck!
John
>
> I also feel something about the difference between the way to designate
> centering and flush left/right. For HTML export we use :align parameter;
> for LaTeX, :center parameter, which only allows us to control centering
> or not. :align parameter is used for alignment of contents of table.
> I'm confused. I guess there's a problem about backward compatibility or
> something.
>
> As you wrote there's a way to change default behaviour, but I feel
> centering is confortable in the most typesetting *with Org*.
> I think such searching result is due to the default behaviour of LaTeX.
> File local option switching the behaviour would be useful, I think.
>
> Best regards,
> Ken Okada
>
>
> At Wed, 29 Jan 2014 18:22:38 -0600,
> John Hendy wrote:
>>
>> On Wed, Jan 29, 2014 at 6:15 PM, Bastien <bzg@gnu.org> wrote:
>> >
>> > Hi Ken,
>> >
>> > Ken Okada <keno.ss57@gmail.com> writes:
>> >
>> > > I have a question. By default tables are centered in LaTeX export.
>> > > Sometimes I prefere to make it flush left or right. I thought this was
>> > > done with, for example,
>> > >
>> > > #+ATTR_LATEX: :center nil
>> > > | a | b |
>> > > | 1 | 2 |
>> >
>> > The use of the :center parameter suggests you consulted a recent
>> > version of the documentation, for Org >=8.0.
>> >
>> > This is how it works for Org 8.0 and above:
>> >
>> > #+ATTR_LATEX: :environment longtable :align l|lp{3cm}r|l
>> > | a | b | c |
>> > | 1 | 2 | 3 |
>> >
>> > If you can, please upgrade. Otherwise, someone needs to check the
>> > documentation for Org 7.8.11...
>>
>> Bastien beat me to it. Yes, the example syntax is for Org > 8.0.
>> Here's a version of the manual for v7.9:
>> - http://www.gnu.org/software/emacs/manual/html_mono/org.html#Tables-in-LaTeX-export
>>
>> I'm not sure what the proper argument is and can't test since I'm on
>> the current version of Org from git. You might take a look at the
>> placement= argument?
>>
>> I'm having a tough time finding info on LaTeX with what makes a table
>> left or right aligned (not the columns, but the table itself). Most of
>> the hits are on how to *center* the table, which seems to suggest they
>> will be left aligned by default.
>>
>> Sorry not to be of better help -- I think Bastien's suggestion to
>> upgrade to 8.0 is the right move. A lot of the mailing list has likely
>> made the move and thus it's hard to troubleshoot versions with the old
>> exporter syntax.
>>
>>
>> Best regards,
>> John
>>
>> >
>> > HTH,
>> >
>> > --
>> > Bastien
>> >
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-01-31 6:29 ` John Hendy
@ 2014-01-31 7:11 ` Nick Dokos
2014-02-03 22:13 ` Marcin Borkowski
0 siblings, 1 reply; 95+ messages in thread
From: Nick Dokos @ 2014-01-31 7:11 UTC (permalink / raw)
To: emacs-orgmode
John Hendy <jw.hendy@gmail.com> writes:
>>> I'm having a tough time finding info on LaTeX with what makes a table
>>> left or right aligned (not the columns, but the table itself). Most of
>>> the hits are on how to *center* the table, which seems to suggest they
>>> will be left aligned by default.
>>>
Does something like this help?
--8<---------------cut here---------------start------------->8---
* Align tables on the page
Here is a table on the left side:
#+LATEX: \noindent
#+ATTR_LATEX: :center nil
| a | b | c |
|---+---+---|
| 1 | 2 | 3 |
| 4 | 5 | 6 |
#+LATEX: \hfill
The noindent just gets rid of the indentation of the first line of a paragraph
which in this case is the table. The hfill adds infinite stretch after the table,
so it pushes the table to the left.
Here is a centered table:
| a | b | c |
|---+---+---|
| 1 | 2 | 3 |
| 4 | 5 | 6 |
And here's a table on the right side:
#+LATEX: \hfill
#+ATTR_LATEX: :center nil
| a | b | c |
|---+---+---|
| 1 | 2 | 3 |
| 4 | 5 | 6 |
Here the hfill adds infinite stretch before the table, so it pushes the table to the right.
--8<---------------cut here---------------end--------------->8---
--
Nick
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-01-31 7:11 ` Nick Dokos
@ 2014-02-03 22:13 ` Marcin Borkowski
0 siblings, 0 replies; 95+ messages in thread
From: Marcin Borkowski @ 2014-02-03 22:13 UTC (permalink / raw)
To: emacs-orgmode
Dnia 2014-01-31, o godz. 02:11:21
Nick Dokos <ndokos@gmail.com> napisał(a):
> John Hendy <jw.hendy@gmail.com> writes:
>
> >>> I'm having a tough time finding info on LaTeX with what makes a
> >>> table left or right aligned (not the columns, but the table
> >>> itself). Most of the hits are on how to *center* the table, which
> >>> seems to suggest they will be left aligned by default.
> >>>
>
> Does something like this help?
What about simply putting your tabular into \begin{flushright} ...
\end{flushright} (or -left, or center)? You don't need floats for
that. And if you /do/ need floats, just say \centering or \raggedright
or \raggedleft before your tabular.
"Left aligned by default" is connected with the boxes-and-glue model of
TeX page, and the way paragraph and page formatters work. It is
described in detail in The TeXbook (in case you are curious).
HTH,
--
Marcin Borkowski
http://octd.wmi.amu.edu.pl/en/Marcin_Borkowski
Adam Mickiewicz University
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2014-05-03 1:52 Ryan Moszynski
2014-05-03 3:01 ` William Henney
0 siblings, 1 reply; 95+ messages in thread
From: Ryan Moszynski @ 2014-05-03 1:52 UTC (permalink / raw)
To: emacs-orgmode
If an org table cell contains the HMS 1@ 11' 37"
is there an easy way to get the total (time)seconds?
(1*3600 + 11*60 + 37 = 4297)
if $4 = 1@ 11' 37"
how do I get $8 = 4297?
thanks
ryan
--
He felt that his whole life was some kind of dream and he sometimes
wondered whose it was and whether they were enjoying it. - Douglas
Adams
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-05-03 1:52 Ryan Moszynski
@ 2014-05-03 3:01 ` William Henney
2014-05-03 3:22 ` William Henney
0 siblings, 1 reply; 95+ messages in thread
From: William Henney @ 2014-05-03 3:01 UTC (permalink / raw)
To: Ryan Moszynski; +Cc: emacs-org
[-- Attachment #1: Type: text/plain, Size: 772 bytes --]
Hi Ryan
Convert to degrees, then multiply by 3600:
| - | - | - | 1@ 11' 37" | - | - | - | 4297 |
#+TBLFM: $8=3600 deg($4); %d
Cheers
Will
On Fri, May 2, 2014 at 8:52 PM, Ryan Moszynski <ryan.moszynski@gmail.com>wrote:
> If an org table cell contains the HMS 1@ 11' 37"
>
> is there an easy way to get the total (time)seconds?
>
> (1*3600 + 11*60 + 37 = 4297)
>
>
> if $4 = 1@ 11' 37"
>
> how do I get $8 = 4297?
>
> thanks
>
> ryan
>
> --
> He felt that his whole life was some kind of dream and he sometimes
> wondered whose it was and whether they were enjoying it. - Douglas
> Adams
>
>
--
Dr William Henney, Centro de Radioastronomía y Astrofísica,
Universidad Nacional Autónoma de México, Campus Morelia
[-- Attachment #2: Type: text/html, Size: 1374 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2014-05-03 3:01 ` William Henney
@ 2014-05-03 3:22 ` William Henney
0 siblings, 0 replies; 95+ messages in thread
From: William Henney @ 2014-05-03 3:22 UTC (permalink / raw)
To: Ryan Moszynski; +Cc: emacs-org
[-- Attachment #1: Type: text/plain, Size: 1382 bytes --]
Or, even better, just divide by the HMS form for 1 second (0@ 0' 1"):
| - | - | - | 1@ 11' 37" | - | - | - | 4297 |
#+TBLFM: $8=$4 \ 0@ 0' 1"
Note that \ is integer division, so there is no need for a format conversion
Will
P.S. I highly recommend reading the [[info:calc#Basic Arithmetic]] section
of the calc manual
On Fri, May 2, 2014 at 10:01 PM, William Henney <whenney@gmail.com> wrote:
> Hi Ryan
>
> Convert to degrees, then multiply by 3600:
>
> | - | - | - | 1@ 11' 37" | - | - | - | 4297 |
> #+TBLFM: $8=3600 deg($4); %d
>
> Cheers
>
> Will
>
>
>
> On Fri, May 2, 2014 at 8:52 PM, Ryan Moszynski <ryan.moszynski@gmail.com>wrote:
>
>> If an org table cell contains the HMS 1@ 11' 37"
>>
>> is there an easy way to get the total (time)seconds?
>>
>> (1*3600 + 11*60 + 37 = 4297)
>>
>>
>> if $4 = 1@ 11' 37"
>>
>> how do I get $8 = 4297?
>>
>> thanks
>>
>> ryan
>>
>> --
>> He felt that his whole life was some kind of dream and he sometimes
>> wondered whose it was and whether they were enjoying it. - Douglas
>> Adams
>>
>>
>
>
> --
>
> Dr William Henney, Centro de Radioastronomía y Astrofísica,
> Universidad Nacional Autónoma de México, Campus Morelia
>
--
Dr William Henney, Centro de Radioastronomía y Astrofísica,
Universidad Nacional Autónoma de México, Campus Morelia
[-- Attachment #2: Type: text/html, Size: 2488 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2015-01-24 16:23 M.S.Khed Khed
0 siblings, 0 replies; 95+ messages in thread
From: M.S.Khed Khed @ 2015-01-24 16:23 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: Type: text/html, Size: 1 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2015-09-04 14:51 Eduardo Mercovich
2015-09-04 15:25 ` thomas
0 siblings, 1 reply; 95+ messages in thread
From: Eduardo Mercovich @ 2015-09-04 14:51 UTC (permalink / raw)
To: Org Mode Mailing List
Hello everbody.
I'm an emacs/org-mode newbie but I'm learning, so please forgive me if
this is obvious for you.
A couple days ago I updated org from the packages-list.
Now, when I'm trying to use a simple org table (typing TAB, for
example), I get:
"org-get-limited-outline-regexp: Variable binding depth exceeds
max-specpdl-size"
Also, while trying to export a document to html, I get:
"Variable binding depth exceeds max-specpdl-size"
Looking up, I saw that this is a mechanisms to protect against infinite
recursions, so I tried to increase the limit -just to get the exporting
done- putting in my .emacs this:
(setq max-specpdl-size 15000)
(setq max-lisp-eval-depth 15000)
But, no luck.
Any pointer about what could be happening, or how to solve it?
Thanks a lot in advance... :)
--
e
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2015-09-04 14:51 Eduardo Mercovich
@ 2015-09-04 15:25 ` thomas
2015-09-04 18:35 ` Eduardo Mercovich
0 siblings, 1 reply; 95+ messages in thread
From: thomas @ 2015-09-04 15:25 UTC (permalink / raw)
To: emacs-orgmode
you could revert to your working org installation (if you did not delete
that folder) by deleting / moving the folder with the faulty
installation (say "org-201508XX") from your .emacs.d/elpa directory.
If this solves your problems, then I would recommend starting a "bare"
emacs
emacs -q
and install org from elpa again. A few days ago I ran into that same
issue :-)
- thomas
On 04.09.2015 16:51, Eduardo Mercovich wrote:
> Hello everbody.
>
> I'm an emacs/org-mode newbie but I'm learning, so please forgive me if
> this is obvious for you.
>
> A couple days ago I updated org from the packages-list.
>
> Now, when I'm trying to use a simple org table (typing TAB, for
> example), I get:
> "org-get-limited-outline-regexp: Variable binding depth exceeds
> max-specpdl-size"
>
> Also, while trying to export a document to html, I get:
> "Variable binding depth exceeds max-specpdl-size"
>
> Looking up, I saw that this is a mechanisms to protect against infinite
> recursions, so I tried to increase the limit -just to get the exporting
> done- putting in my .emacs this:
>
> (setq max-specpdl-size 15000)
> (setq max-lisp-eval-depth 15000)
>
> But, no luck.
>
> Any pointer about what could be happening, or how to solve it?
> Thanks a lot in advance... :)
>
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2015-09-04 15:25 ` thomas
@ 2015-09-04 18:35 ` Eduardo Mercovich
0 siblings, 0 replies; 95+ messages in thread
From: Eduardo Mercovich @ 2015-09-04 18:35 UTC (permalink / raw)
To: thomas; +Cc: emacs-orgmode
Dear Thomas.
> you could revert to your working org installation (if you did not delete
> that folder) by deleting / moving the folder with the faulty
> installation (say "org-201508XX") from your .emacs.d/elpa directory.
> If this solves your problems, then I would recommend starting a "bare"
> emacs
> emacs -q
> and install org from elpa again.
I did it, with some hiccups in the middle, and now I have a working
Org-mode version 8.3.1 (8.3.1-95-g1dbb25-elpaplus)
in
~/.emacs.d/elpa/org-20150831/
Thank you! :)
> A few days ago I ran into that same issue :-)
Even while upgrading is not yet perfect, the packaging system is
becoming better by each version.
As I'm not a bleeding edge developer, I may enjoy this version for a
while, but for those who may step on the same rock:
1 . I uninstalled org from the package manager (M-x list-packages, there
mark with "D" and execute with "x")
2 . unloaded every org file (this is important, close all org buffers
before installation),
3. . and installed again org from the package manager;
4. . after, installed org-plus-contrib.
Now it seems it's working fine, and I hope it may serve others too.
Don't forget to unload org buffers before install! (is upgrading the
same?).
Thanks a lot Thomas! :)
Best...
--
e
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2015-10-11 19:51 Shankar Rao
0 siblings, 0 replies; 95+ messages in thread
From: Shankar Rao @ 2015-10-11 19:51 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 2639 bytes --]
I have multiple savings accounts, some of which I want to partition into
mutiple virtual "subaccounts" that don't merit their own savings account. I
want to use org-mode tables to keep track how much money is each
subaccount. Given the following table:
#+TBLNAME: trans-150925
| ! | Amount | From | To | Subacct |
|---+--------+------------+------------+-------------|
| | 50 | Short Term | Inbox | Bond |
| | 200 | Inbox | Short Term | Bond |
| | 120 | Gifts | Inbox | Baby Gifts |
| | 75 | Short Term | Inbox | Furnishings |
In this example, I have accounts "Inbox", "Short Term", and "Gifts". Of
these accounts, "Short Term" has two subaccounts "Bond" and "Furnishings",
and "Gifts" has a subaccount "Baby Gifts". I want to create a function that
given a subaccount name, calculates the net amount to be
withdrawn/deposited to the subaccount. Note that "Inbox" doesn't have any
subaccounts, which I want to use to determine if a given transaction is a
withdrawal or deposit to the subaccount.
I have created the following two functions to implement this:
(defun sbr/org-lookup-trans (category date s-name r-name)
(let* ((table (concat "trans-" date))
(s-range (format "@I%s..@>%s" s-name s-name))
(s-col (org-table-get-remote table s-range))
(r-range (format "@I%s..@>%s" r-name r-name))
(r-col (org-table-get-remote table r-range)))
(org-lookup-all category s-col r-col)))
(defun sbr/get-net-subacct (category date)
(let* ((from-vec (sbr/org-lookup-trans category date "$Subacct" "$From"))
(to-vec (sbr/org-lookup-trans category date "$Subacct" "$To"))
(amount-vec (sbr/org-lookup-trans category date "$Subacct"
"$Amount"))
(from-inbox-ind <indices of all from-vec elements that equal
"Inbox">) ; A
(to-inbox-ind <indices of all to-vec elements that equal "Inbox">)
; B
(adds amount-vec[from-inbox-ind]) ; C
(subs amount-vec[to-inbox-ind])) ; D
(calc-eval (if (zerop (length subs))
adds
(concat adds "-" subs)))))
I need help filling in the pseudo code in lines A through D, namely:
1. how to get a list of all indices of elements in a vector that satisfy a
predicate?
2. how to reference a vector by a list of indices?
In this example the function should return the following values:
(sbr/get-net-subacct "Bond" "150925") ==> 150
(sbr/get-net-subacct "Furnishings" "150925") ==> -75
(sbr/get-net-subacct "Baby Gifts" "150925") ==> -120
How do I implement the above pseudocode functions? Is there a simpler way
to accomplish this task?
[-- Attachment #2: Type: text/html, Size: 5700 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2015-11-03 19:53 Fritz Kunze
0 siblings, 0 replies; 95+ messages in thread
From: Fritz Kunze @ 2015-11-03 19:53 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 678 bytes --]
i am running emacs on a chromebook namely emacs 24.4.1 and org
8.3.1-87-g4ef2c0...) on
chromebrew(https://skycocker.github.io/chromebrew/) . My question:How
to make emacs org-mode open links to sites in Google Chrome?How to
make emacs org-mode open links to sites in Google Chrome
thanks in advance,
fritz kunze (fkunze@gmail.com)
i tried adding these lines to my init.el file (with no effect):
(setq browse-url-browser-function 'browse-url-generic
browse-url-generic-program "chromium-browser")
(setq browse-url-browser-function 'browse-url-generic
browse-url-generic-program "google-chrome")
export BROWSER="google-chrome"
browse-url-generic-program
[-- Attachment #2: Type: text/html, Size: 1228 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2016-09-19 16:38 John Brodie
2016-09-20 20:32 ` Nicolas Goaziou
0 siblings, 1 reply; 95+ messages in thread
From: John Brodie @ 2016-09-19 16:38 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 5600 bytes --]
From: brodiej@SEA-9901331265.i-did-not-set--mail-host-address--so-tickle-me
To: emacs-orgmode@gnu.org
Subject: Bug: Babel :results raw doesn't replace results. [8.3.4
(8.3.4-72-gddd58f-elpa @
c:/Users/brodiej/AppData/Roaming/.emacs.d/elpa/org-20160530/)]
Date: Mon, 19 Sep 2016 09:35:36 -0700
Message-ID:
<tcbvsvaxru9t3.fsf@SEA-9901331265.i-did-not-set--mail-host-address--so-tickle-me
>
--text follows this line--
I'm creating a literate program using org-babel with python. If I change
the output of a source block to 'raw' the results are not replaced on
each run, they are appended. This is quite annoying, because it means
manual editing everytime I need to re-run my program. If I try to set
the flags 'replace' 'prepend' etc. they have no effect:
#+name: Example1
#+begin_src python :session :results raw :exports none
'dogs and cats'
#+end_src
#+RESULTS: Example1
dogs and cats
dogs and cats
dogs and cats
dogs and cats
dogs and cats
Emacs : GNU Emacs 25.0.92.1 (x86_64-w64-mingw32)
of 2016-03-03
Package: Org-mode version 8.3.4 (8.3.4-72-gddd58f-elpa @
c:/Users/brodiej/AppData/Roaming/.emacs.d/elpa/org-20160530/)
current state:
==============
(setq
org-id-locations-file
"c:/Users/brodiej/AppData/Roaming/.emacs.d/.cache/.org-id-locations"
org-export-backends '(ascii html icalendar latex odt confluence)
org-latex-default-figure-position "H"
org-export-babel-evaluate nil
org-tab-first-hook '(org-hide-block-toggle-maybe
org-babel-hide-result-toggle-maybe
org-babel-header-arg-expand)
org-latex-default-packages-alist '(("AUTO" "inputenc" t) ("T1" "fontenc"
nil)
("" "fixltx2e" nil) ("" "graphicx" t)
("" "grffile" t)
("" "longtable" nil) ("" "wrapfig" nil)
("" "rotating" nil)
("normalem" "ulem" t) ("" "amsmath" t)
("" "textcomp" t)
("" "amssymb" t) ("" "capt-of" nil) (""
"hyperref" nil))
org-clock-persist-file
"c:/Users/brodiej/AppData/Roaming/.emacs.d/.cache/org-clock-save.el"
org-speed-command-hook '(org-speed-command-default-hook
org-babel-speed-command-hook)
org-occur-hook '(org-first-headline-recenter)
org-metaup-hook '(org-babel-load-in-session-maybe)
org-html-format-drawer-function '(lambda (name contents) contents)
org-log-done 'time
org-latex-format-inlinetask-function
'org-latex-format-inlinetask-default-function
org-confirm-shell-link-function 'yes-or-no-p
org-ascii-format-inlinetask-function 'org-ascii-format-inlinetask-default
org-link-translation-function 'toc-org-unhrefify
org-present-mode-hook '(spacemacs//org-present-start)
org-agenda-restore-windows-after-quit t
org-agenda-custom-commands '(("n" "Agenda and all TODOs"
((agenda "" nil) (todo "NEXT" nil) (alltodo
"" nil)) nil)
)
org-latex-format-headline-function
'org-latex-format-headline-default-function
org-default-notes-file "notes.org"
org-latex-image-default-width ".6\\linewidth"
org-startup-indented t
org-after-todo-state-change-hook '(org-clock-out-if-current)
org-latex-format-drawer-function '(lambda (name contents) contents)
org-odt-format-headline-function 'org-odt-format-headline-default-function
org-src-mode-hook '(org-src-babel-configure-edit-buffer
org-src-mode-configure-edit-buffer)
org-agenda-before-write-hook '(org-agenda-add-entry-text)
org-babel-pre-tangle-hook '(save-buffer)
org-mode-hook '(#[nil "\300\301\302\303\304$\207"
[org-add-hook change-major-mode-hook org-show-block-all
append local] 5]
#[nil "\300\301\302\303\304$\207"
[org-add-hook change-major-mode-hook
org-babel-show-result-all append local] 5]
org-babel-result-hide-spec org-babel-hide-all-hashes
toc-org-enable
org-bullets-mode flyspell-mode spacemacs/add-org-surrounds
evil-org-mode
org-eldoc-load)
org-latex-prefer-user-labels t
org-archive-hook '(org-attach-archive-delete-maybe)
org-level-color-stars-only t
org-ascii-format-drawer-function '(lambda (name contents width) contents)
org-odt-format-inlinetask-function
'org-odt-format-inlinetask-default-function
org-ctrl-c-ctrl-c-hook '(org-babel-hash-at-point
org-babel-execute-safely-maybe)
org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers
org-cycle-show-empty-lines
org-optimize-window-after-visibility-change)
org-present-mode-quit-hook '(spacemacs//org-present-end)
org-export-async-init-file
"c:/Users/brodiej/AppData/Roaming/.emacs.d/layers/org/org-async-init.el"
org-todo-keywords '((sequence "TODO(t)" "NEXT(n)" "STARTED" "WAITING(w)"
"|" "DONE(d)"
"CANCELED(c)")
)
org-babel-tangle-lang-exts '(("python" . "py") ("emacs-lisp" . "el")
("elisp" . "el"))
org-confirm-elisp-link-function 'yes-or-no-p
org-startup-with-inline-images t
org-metadown-hook '(org-babel-pop-to-session-maybe)
org-odt-format-drawer-function '(lambda (name contents) contents)
org-ditaa-jar-path
"C:\\Users\\brodiej\\AppData\\Roaming\\.emacs.d\\ditaa\\ditaa.jar"
org-html-format-headline-function
'org-html-format-headline-default-function
org-babel-load-languages '((python . t) (ditaa . t))
org-html-format-inlinetask-function
'org-html-format-inlinetask-default-function
org-fontify-whole-heading-line t
org-agenda-files '("c:/docs/planner/brodie_planning.org")
org-clock-out-hook '(org-clock-remove-empty-clock-drawer)
org-confirm-babel-evaluate nil
org-src-fontify-natively t
)
[-- Attachment #2: Type: text/html, Size: 7250 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2016-09-19 16:38 John Brodie
@ 2016-09-20 20:32 ` Nicolas Goaziou
0 siblings, 0 replies; 95+ messages in thread
From: Nicolas Goaziou @ 2016-09-20 20:32 UTC (permalink / raw)
To: John Brodie; +Cc: emacs-orgmode
Hello,
John Brodie <john.brodie@gmail.com> writes:
> I'm creating a literate program using org-babel with python. If I change
> the output of a source block to 'raw' the results are not replaced on
> each run, they are appended. This is quite annoying, because it means
> manual editing everytime I need to re-run my program.
You should use `drawer' instead of `raw' then. `raw' results cannot be
replaced, as you noticed, because there is no way to know where their
boundaries are.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2016-11-01 16:10 John Kitchin
0 siblings, 0 replies; 95+ messages in thread
From: John Kitchin @ 2016-11-01 16:10 UTC (permalink / raw)
To: brown; +Cc: John Kitchin, Emacs-orgmode@gnu.org
[-- Attachment #1.1: Type: text/plain, Size: 1088 bytes --]
We might not always want a full export of an org heading to html for sending an email. Eric Brown would like to just send something that looks like what he sees in org-mode. There is another way to get html from emacs: htmlize! Here is an example. Eric: if this is what you mean, see my modified org-mime.el at [[https://github.com/jkitchin/scimax/blob/master/org-mime.el]].
The command to send a subtree is: [[elisp:org-mime-subtree-htmlize]]
#+BEGIN_EXAMPLE
My comment was motivated by other usage where I wish that I could simply
wrap an entire simple text, whitespace-formatted email message,
e.g. generated from org export to a plain text buffer, with a Monospace
directive so that webmail users could appreciate what I see with Sans
Mono.
#+END_EXAMPLE
| a | b | c |
| 4 | 5 | 6 |
An equation \(e^{i\pi} + 1 = 0\)
A figure:
#+NAME: fig-particle
[[file:./images/Au-icosahedron-3.png]]
A code block:
#+BEGIN_SRC python
for i in range(5):
print(i)
#+END_SRC
* A subtree
An orgmode reference: [[#Dominik201408][Dominik201408]]. A figure reference: [[ref:fig-particle]].
[-- Attachment #1.2: Type: text/html, Size: 5832 bytes --]
[-- Attachment #2: 475609b3cce30ba7af08c3ab389ce997.png --]
[-- Type: image/png, Size: 9141 bytes --]
[-- Attachment #3: htmlize-mail_602c4147af78abc9245028abc638c8417a1a6bf0.png --]
[-- Type: image/png, Size: 299 bytes --]
[-- Attachment #4: Au-icosahedron-3.png --]
[-- Type: image/png, Size: 30407 bytes --]
[-- Attachment #5: Type: text/plain, Size: 190 bytes --]
--
Professor John Kitchin
Doherty Hall A207F
Department of Chemical Engineering
Carnegie Mellon University
Pittsburgh, PA 15213
412-268-7803
@johnkitchin
http://kitchingroup.cheme.cmu.edu
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2018-03-02 16:10 Joseph Vidal-Rosset
0 siblings, 0 replies; 95+ messages in thread
From: Joseph Vidal-Rosset @ 2018-03-02 16:10 UTC (permalink / raw)
To: Eric Fraga; +Cc: Fabrice Niessen, emacs-orgmode list
[-- Attachment #1: Type: text/plain, Size: 553 bytes --]
Dear Eric,
Just a quick email to tell you that I have just succeeded to configure
gnus-alias [[https://www.emacswiki.org/emacs/GnusAlias]]
rather correctly mainly thanks to Fabrice Niessen
[[https://github.com/fniessen/emacs-leuven/blob/master/gnus-leuven.el]]
(many thanks Fabrice !)
and thanks to other related web pages. I still do not succeed to use
correctly regular expressions for gnus-alias-identity-rules but,
anyway, at the moment it works correctly for me. It is a very good
tool.
Best wishes,
Jo
[-- Attachment #2.1: Type: text/html, Size: 808 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2018-05-03 13:44 Arne Babenhauserheide
2018-05-03 14:29 ` Bastien
2018-05-11 20:07 ` Nicolas Goaziou
0 siblings, 2 replies; 95+ messages in thread
From: Arne Babenhauserheide @ 2018-05-03 13:44 UTC (permalink / raw)
To: emacs-orgmode
Dear Org Hackers,
When I use org-capture to capture a new task, the next headline
sometimes ends up being prefixed by the last line of the new task.
Example:
Begin:
* Foo
** old task
* Bar
After capture:
* Foo
** old task
** ❢ new task
:LOGBOOK:
CLOCK: [2018-05-03 Do 14:05]--[2018-05-03 Do 15:24] => 1:19
:END:
https://some.url/foo* Bar
Best wishes,
Arne Babenhauserheide
Emacs : GNU Emacs 25.2.2 (x86_64-pc-linux-gnu, GTK+ Version 3.22.21)
of 2017-09-22, modified by Debian
Package: Org mode version 9.1.7 (9.1.7-12-g74f6ed-elpa @ /home/babenhauserheide/.emacs.d/elpa/org-20180305/)
current state:
==============
(setq
org-tab-first-hook '(org-babel-hide-result-toggle-maybe org-babel-header-arg-expand)
org-habit-show-all-today t
org-speed-command-hook '(org-speed-command-activate org-babel-speed-command-activate)
org-clock-history-length 35
org-occur-hook '(org-first-headline-recenter)
org-metaup-hook '(org-babel-load-in-session-maybe)
org-clock-mode-line-total 'today
org-duration-format '((special . h:mm))
org-confirm-shell-link-function 'yes-or-no-p
org-columns-default-format "%25ITEM %TODO %3PRIORITY %TAGS %17Effort(Estimated Effort){:} %CLOCKSUM"
org-jira-done-states '("Closed" "Resolved" "Done" "Geschlossen" "Bearbeitet")
org-agenda-custom-commands '(("o" "Agenda and TODOs"
((agenda nil
((org-agenda-compact-blocks nil) (org-agenda-block-separator 45)
(org-agenda-overriding-header ""))
)
(tags-todo "-Arlaub-notodo" ((org-agenda-block-separator 45)))
(tags "KANBAN"
((org-agenda-block-separator 45) (org-agenda-compact-blocks nil)
(org-agenda-overriding-header ""))
)
)
)
)
org-default-notes-file "~/Plan/plan.org"
org-capture-templates '(("l" "Task for later" entry (file+headline "~/Plan/plan.org" "Tasks") "** ❢ %?\n\n"
:empty-lines 1 :clock-in t :clock-resume t)
("i" "Task to start immediately after filing" entry
(file+headline "~/Plan/plan.org" "Tasks") "** ☯ %?\n\n" :jump-to-captured t
:empty-lines 1 :clock-in t :clock-keep t)
("w" "weekly schedule" entry (file+headline "~/Plan/schedule.org" "Regular Schedule")
"** %?\n SCHEDULED: %^{Scheduled when?}T\n\n" :empty-lines 1 :clock-resume t)
)
org-clock-out-when-done nil
org-after-todo-state-change-hook '(org-clock-out-if-current kiwon/org-agenda-redo-in-other-window)
org-src-mode-hook '(org-src-babel-configure-edit-buffer org-src-mode-configure-edit-buffer)
org-agenda-before-write-hook '(org-agenda-add-entry-text)
org-agenda-clock-consistency-checks '(:max-duration "10:00" :min-duration 0 :max-gap "0:05" :gap-ok-around
("4:00" "12:30") :default-face
((:background "DarkRed") (:foreground "white")) :overlap-face nil
:gap-face nil :no-end-time-face nil :long-face nil :short-face nil)
org-babel-pre-tangle-hook '(save-buffer)
org-global-properties '(("Effort_ALL" . "0:30 1:00 2:00 3:00 6:00 8:00 16:00 40:00"))
org-mode-hook '(#[0 "\b\205\x1c\0\301 \205\x1c\0\302\303\301 !\304P!\305\x01!\205\x1a\0\306\x01!\262\x01\207"
[org-ctags-enabled-p buffer-file-name expand-file-name file-name-directory "/TAGS"
file-exists-p visit-tags-table]
3]
#[0 "\300\301\302\303\304$\207"
[add-hook change-major-mode-hook org-show-block-all append local] 5]
#[0 "\300\301\302\303\304$\207"
[add-hook change-major-mode-hook org-babel-show-result-all append local] 5]
org-babel-result-hide-spec org-babel-hide-all-hashes)
org-bibtex-headline-format-function #[257 "\300\x01\236A\207" [:title] 3 "\n\n(fn ENTRY)"]
org-archive-hook '(org-attach-archive-delete-maybe)
org-directory "~/Plan"
org-cycle-hook '(org-cycle-hide-archived-subtrees org-cycle-hide-drawers org-cycle-show-empty-lines
org-optimize-window-after-visibility-change)
org-agenda-start-with-clockreport-mode t
org-agenda-finalize-hook '((lambda nil (org-agenda-to-appt t)))
org-modules '(org-bbdb org-bibtex org-crypt org-ctags org-docview org-eww org-gnus org-habit org-info org-irc
org-mhe org-rmail org-w3m)
org-clock-report-include-clocking-task t
org-timer-default-timer "\"0:00:30\""
org-babel-tangle-lang-exts '(("python" . "py") ("emacs-lisp" . "el") ("elisp" . "el"))
org-confirm-elisp-link-function 'yes-or-no-p
org-edit-src-content-indentation 0
org-metadown-hook '(org-babel-pop-to-session-maybe)
org-clock-string-limit 16
org-clock-budget-intervals '(("BUDGET_YEAR" ignore) ("BUDGET_MONTH" ignore)
("BUDGET_WEEK" org-clock-budget-interval-this-week))
org-link-parameters '(("id" :follow org-id-open) ("jira" :follow org-jira-open :export nil)
("w3m" :store org-w3m-store-link)
("rmail" :follow org-rmail-open :store org-rmail-store-link)
("mhe" :follow org-mhe-open :store org-mhe-store-link)
("irc" :follow org-irc-visit :store org-irc-store-link)
("info" :follow org-info-open :export org-info-export :store org-info-store-link)
("gnus" :follow org-gnus-open :store org-gnus-store-link)
("eww" :follow eww :store org-eww-store-link)
("docview" :follow org-docview-open :export org-docview-export :store
org-docview-store-link)
("bibtex" :follow org-bibtex-open :store org-bibtex-store-link)
("bbdb" :follow org-bbdb-open :export org-bbdb-export :complete org-bbdb-complete-link
:store org-bbdb-store-link)
("file+sys") ("file+emacs") ("doi" :follow org--open-doi-link)
("elisp" :follow org--open-elisp-link) ("file" :complete org-file-complete-link)
("ftp" :follow (lambda (path) (browse-url (concat "ftp:" path))))
("help" :follow org--open-help-link)
("http" :follow (lambda (path) (browse-url (concat "http:" path))))
("https" :follow (lambda (path) (browse-url (concat "https:" path))))
("mailto" :follow (lambda (path) (browse-url (concat "mailto:" path))))
("news" :follow (lambda (path) (browse-url (concat "news:" path))))
("shell" :follow org--open-shell-link))
org-babel-load-languages '((emacs-lisp . t) (shell . t) (python . t) (dot . t) (scheme . t))
org-clock-sound t
org-clock-in-hook '(kiwon/org-agenda-redo-in-other-window)
org-reveal-start-hook '(org-decrypt-entry)
org-agenda-files '("~/Plan/plan.org" "~/Plan/reviews.org" "~/Plan/standups.org" "~/Plan/schedule.org")
org-clock-out-hook '(org-clock-remove-empty-clock-drawer kiwon/org-agenda-redo-in-other-window)
)
--
unpolitisch sein
heißt politisch sein,
ohne es zu merken.
- ArneBab
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-05-03 13:44 Arne Babenhauserheide
@ 2018-05-03 14:29 ` Bastien
2018-05-03 21:02 ` Arne Babenhauserheide
2018-05-04 5:38 ` Michael Welle
2018-05-11 20:07 ` Nicolas Goaziou
1 sibling, 2 replies; 95+ messages in thread
From: Bastien @ 2018-05-03 14:29 UTC (permalink / raw)
To: Arne Babenhauserheide; +Cc: emacs-orgmode
Dear Arne,
there was a temporary glitch in earlier version of Org about this,
please upgrade Org to 9.1.12 through the package system and let us
know if you still have this issue.
Thanks!
--
Bastien
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-05-03 14:29 ` Bastien
@ 2018-05-03 21:02 ` Arne Babenhauserheide
2018-05-04 1:02 ` steen
2018-05-04 5:38 ` Michael Welle
1 sibling, 1 reply; 95+ messages in thread
From: Arne Babenhauserheide @ 2018-05-03 21:02 UTC (permalink / raw)
To: Bastien; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 603 bytes --]
Dear Bastien,
Thank you for your answer! I’ll check whether the update resolves this.
(and I’m sorry for the empty subject, I copied the email from Emacs,
since I do not have mail sending from emacs configured at work, and I
forgot to copy the subject).
Best wishes,
Arne
Bastien <bzg@gnu.org> writes:
> Dear Arne,
>
> there was a temporary glitch in earlier version of Org about this,
> please upgrade Org to 9.1.12 through the package system and let us
> know if you still have this issue.
>
> Thanks!
--
Unpolitisch sein
heißt politisch sein
ohne es zu merken
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 1076 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-05-03 21:02 ` Arne Babenhauserheide
@ 2018-05-04 1:02 ` steen
0 siblings, 0 replies; 95+ messages in thread
From: steen @ 2018-05-04 1:02 UTC (permalink / raw)
To: arne_bab; +Cc: bzg, org-mode-email
[-- Attachment #1: Type: text/plain, Size: 805 bytes --]
FYI I am on org 9.1.4 and am still seeing this issue.
-- Steen
On Thu, May 3, 2018 at 2:26 PM Arne Babenhauserheide <arne_bab@web.de>
wrote:
> Dear Bastien,
>
> Thank you for your answer! I’ll check whether the update resolves this.
>
>
> (and I’m sorry for the empty subject, I copied the email from Emacs,
> since I do not have mail sending from emacs configured at work, and I
> forgot to copy the subject).
>
> Best wishes,
> Arne
>
> Bastien <bzg@gnu.org> writes:
>
> > Dear Arne,
> >
> > there was a temporary glitch in earlier version of Org about this,
> > please upgrade Org to 9.1.12 through the package system and let us
> > know if you still have this issue.
> >
> > Thanks!
>
>
> --
> Unpolitisch sein
> heißt politisch sein
> ohne es zu merken
>
[-- Attachment #2: Type: text/html, Size: 1291 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-05-03 14:29 ` Bastien
2018-05-03 21:02 ` Arne Babenhauserheide
@ 2018-05-04 5:38 ` Michael Welle
1 sibling, 0 replies; 95+ messages in thread
From: Michael Welle @ 2018-05-04 5:38 UTC (permalink / raw)
To: emacs-orgmode
Hello,
Bastien <bzg@gnu.org> writes:
> Dear Arne,
>
> there was a temporary glitch in earlier version of Org about this,
> please upgrade Org to 9.1.12 through the package system and let us
> know if you still have this issue.
oh, i thought that is a feature of some kind. Let me upgrade... Hm, the
feature|issue still exist in 9.1.12.
The issue occurs if the capture buffer isn't finished with a newline. My
workaround:
;;
;; Since some time Org does not prepend a \n after inserting
;; a capture template. We fix this ;).
;;
(defun hmw/org-insert-newline-after-template ()
(goto-char (point-max))
(if (not (re-search-backward "\\(^$\\)" (point-at-bol) t))
(progn
(goto-char (point-max))
(insert "\n"))))
(setq org-capture-prepare-finalize-hook
'hmw/org-insert-newline-after-template)
Regards
hmw
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-05-03 13:44 Arne Babenhauserheide
2018-05-03 14:29 ` Bastien
@ 2018-05-11 20:07 ` Nicolas Goaziou
1 sibling, 0 replies; 95+ messages in thread
From: Nicolas Goaziou @ 2018-05-11 20:07 UTC (permalink / raw)
To: Arne Babenhauserheide; +Cc: emacs-orgmode
Hello,
"Arne Babenhauserheide" <Arne_Bab@web.de> writes:
> Dear Org Hackers,
>
> When I use org-capture to capture a new task, the next headline
> sometimes ends up being prefixed by the last line of the new task.
>
> Example:
>
> Begin:
>
> * Foo
> ** old task
>
> * Bar
>
> After capture:
>
> * Foo
> ** old task
> ** ❢ new task
> :LOGBOOK:
> CLOCK: [2018-05-03 Do 14:05]--[2018-05-03 Do 15:24] => 1:19
> :END:
>
> https://some.url/foo* Bar
>
>
> Best wishes,
> Arne Babenhauserheide
>
>
>
> Emacs : GNU Emacs 25.2.2 (x86_64-pc-linux-gnu, GTK+ Version 3.22.21)
> of 2017-09-22, modified by Debian
> Package: Org mode version 9.1.7 (9.1.7-12-g74f6ed-elpa @
> /home/babenhauserheide/.emacs.d/elpa/org-20180305/)
Could you update Org mode and see if problem persists?
Thank you.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2018-10-15 8:04 Nik Clayton
2018-10-17 13:20 ` Nicolas Goaziou
2019-09-15 21:06 ` Matt Price
0 siblings, 2 replies; 95+ messages in thread
From: Nik Clayton @ 2018-10-15 8:04 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1.1: Type: text/plain, Size: 3114 bytes --]
Hi,
I'd like to propose a couple of changes / enhancements to how org-export
exports some data in to HTML files to make it slightly easier to style
those files.
The first is re line-numbers.
At the moment those get exported as content in the HTML, although they're
really additional metadata. Amongst other things, this means that if you
copy/paste from the output you get the line numbers included in the text
that's copied.
CSS supports arbitrary counters that can be associated with content,
starting from an arbitrary value. My current hack that sort of works is the
following CSS:
/* Hide the current line numbers */
span.linenr {
display: none;
}
/* Style each line. Maintain a counter for each line, increment
by one for each <code>...</code> element.
.reveal pre.src code {
display: inline;
font-size: 125%;
line-height: 1.2;
counter-increment: line;
}
/* Show a line number before each line. */
.reveal pre.src code:before {
content: counter(line);
border-right: 1px solid #ddd;
padding: 0 0.5em;
margin-right: 0.5em;
width: 1em;
display: inline-block;
text-align: right;
}
and a change to org-html-do-format-code to wrap each line in its own
<code>...</code> element:
...
;; Transcoded src line.
(format "<code>%s</code>" loc)
...
But this adds line numbers to all code blocks, irrespective of the "-n"
option, and they all start from one.
What I'd like to do is change the output to:
1. Omit the <span class="linenr">...</span>" content.
2. Add an additional class to the pre element to indicate whether or not
this block should have line numbers.
3. Add a data-ox-starting-number (or similar) attribute to the pre element
that specifies what the starting line number for this block should be.
Couple of questions before I write a patch:
a) Does that sound reasonable?
b) Should this replace the current approach, or be an option that can be
toggled by a customisation?
And the second is re languages associated with exported SRC blocks.
At the moment the language is mentioned as src-... class (src-html,
src-javascript, etc).
I'd like to put the language in a data-ox-src-language attribute as well
(e.g., <pre class="src src-html" data-ox-src-language="HTML">...</pre>) so
that I can put use CSS to put badges indicating the language in the output.
Per
https://developer.mozilla.org/en-US/docs/Learn/HTML/Howto/Use_data_attributes
that would look something like:
.src:after {
content: attr(data-ox-src-language);
position: absolute;
top: -10px;
right: -10px;
font-size: 70%;
background: green;
color: white;
text-align: center;
line-height: 18px;
border-radius: .25em;
padding: 0 0.5em;
box-shadow: 0 0 1px #333;
}
I see there's already some code that tries to show language badges on hover
(which doesn't work for me for some reason, I haven't dug in to why).
Does this change sound reasonable?
Here's a screenshot from an export showing early versions of these changes
in action. Notice how the selected text (the first function) doesn't
include the line numbers in the selection.
[image: image.png]
N
[-- Attachment #1.2: Type: text/html, Size: 5456 bytes --]
[-- Attachment #2: image.png --]
[-- Type: image/png, Size: 31536 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-10-15 8:04 Nik Clayton
@ 2018-10-17 13:20 ` Nicolas Goaziou
2019-09-15 21:06 ` Matt Price
1 sibling, 0 replies; 95+ messages in thread
From: Nicolas Goaziou @ 2018-10-17 13:20 UTC (permalink / raw)
To: Nik Clayton; +Cc: emacs-orgmode
Hello,
Nik Clayton <nik@ngo.org.uk> writes:
> I'd like to propose a couple of changes / enhancements to how org-export
> exports some data in to HTML files to make it slightly easier to style
> those files.
>
> The first is re line-numbers.
[...]
> Couple of questions before I write a patch:
>
> a) Does that sound reasonable?
> b) Should this replace the current approach, or be an option that can be
> toggled by a customisation?
My HTML/CSS knowledge is feeble. But it does sound reasonable, if
there's no loss of feature and compatibility.
A patch would be nice for users exporting to HTML who want to test the
behaviour.
> And the second is re languages associated with exported SRC blocks.
[...]
> I see there's already some code that tries to show language badges on hover
> (which doesn't work for me for some reason, I haven't dug in to why).
>
> Does this change sound reasonable?
Ditto.
Regards,
--
Nicolas Goaziou
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2018-10-20 9:02 stardiviner
0 siblings, 0 replies; 95+ messages in thread
From: stardiviner @ 2018-10-20 9:02 UTC (permalink / raw)
To: org-mode
Org source block header argument :var does not support quoted string with space separator like bellowing example:
For example
**** encrypt text -- ~<<< [TEXT]~
#+NAME: base64 encrypt text
#+begin_src sh
base64 <<< "stardiviner <numbchild@gmail.com>"
#+end_src
#+RESULTS: base64 encrypt text
: c3RhcmRpdmluZXIgPG51bWJjaGlsZEBnbWFpbC5jb20+Cg==
**** decrypt text -- ~-d~
#+begin_src sh :var encrypted="base64 encrypt text"
# base64 -d <<< c3RhcmRpdmluZXIgPG51bWJjaGlsZEBnbWFpbC5jb20+Cg==
base64 -d <<< $encrypted
#+end_src
If I use #+NAME: base64-encrypt-text and :var encrypted=base64-encrypt-text, then it works fine.
--
[ stardiviner ] don't need to convince with trends.
Blog: https://stardiviner.github.io/
IRC(freenode): stardiviner
GPG: F09F650D7D674819892591401B5DF1C95AE89AC3
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2018-12-19 12:58 Emmanuel Charpentier
0 siblings, 0 replies; 95+ messages in thread
From: Emmanuel Charpentier @ 2018-12-19 12:58 UTC (permalink / raw)
To: emacs-orgmode
[-- Attachment #1.1: Type: text/plain, Size: 2223 bytes --]
[ Fourth attempt to send this to emacs-orgmode ; the first three attempts
were made from an account using an SMTP server seemingly blacklisted, but
no error message was sent back. Apologies if this turns out to be a
duplicate ]
I wish to be able to reference (i. e cross-references, lists) both some
tables or figures AND the code producing the objects.
To this effect, I added (distinct) #+caption:s to the source blocks AND
to the results, adorned with (distinct) org-ref's labels. An example is
included in the enclosed file Min-Ref.org.
The comparison of this source, the LaTeX code obtained by org-latex
export-to latex (Min-Ref.tex) and the resultant PDF (Min-Ref exported
by org-latex-export-to-pdf.pdf) show that the labels attributed to
source blocks are mislabeled as figures. Furthermore, while the org
source requests a list of figure, a list of table and a list of
listings (in that order), the list of figures appears *after* the list
of tables.
I am tempted to conclude that there is some confusion between figures
and listings. Further attempts tend to show that the problem may live n
the core org's code, rather than any specific exporter :
The ODT "native" exporter (org-odt-export-to-odt) is much less capable,
as shown in Min-Ref exported by org-odt-export-to-odt.odt.
Attempts to export via Pandoc to PDF (Min-Ref exported by org-pandoc-
export-to-latex-pdf.pdf), ODT (Min-Ref exported by org-pandoc-export-
to-odt.odt) and DOCX (Min-Ref.docx) show that these exporters may need
some specific configurations in order to be even vaguely usable.
Previous trials, using #+names: rather than org-ref's labels, gave
similar failures. If needed, I can reproduce these trials.
So I have a couple questions :
1) Is the confusion of source blocks and figures a bug, or do I miss a
subtle point ?
2) Is there some introductory material to the care and feeding of ox-
pandoc demonstrating the use of this exporter's options to enable the
addition of the needed features (figure inclusion, tables of tables /
figures / listings, etc...) ? The "manual" available as a README is way
too terse to be usable without diving in the source code and pandoc's
documentation.
Sincerely,
--
Emmanuel Charpentier
[-- Attachment #1.2: Type: text/html, Size: 3340 bytes --]
[-- Attachment #2: Min-Ref.docx --]
[-- Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document, Size: 10789 bytes --]
[-- Attachment #3: Min-Ref.org --]
[-- Type: application/octet-stream, Size: 1645 bytes --]
#+options: toc:nil
#+property: header-args:python :session
#+language: fr
#+title: What's up with references ?
#+author:
#+date: December 2018
#+toc: headlines
#+toc: figures
#+toc: tables
#+toc: listings
* Some reference samples
This is created using =org-ref= 's =label= 's and =ref= 's.
** A reference...
... to cite:gelmanBayesianDataAnalysis2013 ,a /good/ textbook.
** A table
A Python block producing a (silly) table.
#+caption: A (silly) Python block. label:lst:Python1
#+BEGIN_SRC python :results table :exports both
[[u+str(v) for v in range(1,4)] for u in ["a", "b"]]
#+END_SRC
#+caption: A (silly) Python table. label:tab:Python1
#+RESULTS:
| a1 | a2 | a3 |
| b1 | b2 | b3 |
The table ref:tab:Python1 is produced by the code ref:lst:Python1.
** A figure
A Python block producing a figure.
#+caption: A Python block producing a figure. label:lst:Python2
#+BEGIN_SRC python :results file :exports both
import matplotlib.pyplot as plt, numpy as np
from sympy import *
x=symbols("x")
f=lambda x:sin(x)/x
t=np.arange(-6*np.pi,6*np.pi, 0.1)
ft=[f(u) for u in t]
fig=plt.figure(figsize=(3,2))
plt.plot(t, ft, "b-")
fig.tight_layout()
plt.savefig("tstfig.pdf")
"tstfig.pdf"
#+END_SRC
#+caption: A (not so silly) figure produced by Python. label:fig:Python2
#+RESULTS:
[[file:tstfig.pdf]]
The figure ref:fig:Python2 is produced by the code ref:lst:Python2.
[[bibliographystyle:vancouver]]
[[bibliography:Minimal.bib]]
# Local Variables:
# org-latex-packages-alist: (("AUTO" "babel" t ("pdflatex")) ("AUTO" "polyglossia" t ("xelatex" "lualatex")))
# org-latex-pdf-process: ("latexmk -shell-escape -bibtex -f -pdf %f")
# End:
[-- Attachment #4: Min-Ref.tex --]
[-- Type: text/x-tex, Size: 2236 bytes --]
% Created 2018-12-17 lun. 15:49
% Intended LaTeX compiler: pdflatex
\documentclass[11pt]{article}
\usepackage[utf8]{inputenc}
\usepackage[T1]{fontenc}
\usepackage{graphicx}
\usepackage{grffile}
\usepackage{longtable}
\usepackage{wrapfig}
\usepackage{rotating}
\usepackage[normalem]{ulem}
\usepackage{amsmath}
\usepackage{textcomp}
\usepackage{amssymb}
\usepackage{capt-of}
\usepackage{hyperref}
\usepackage[frenchb]{babel}
\date{December 2018}
\title{What's up with references ?}
\hypersetup{
pdfauthor={},
pdftitle={What's up with references ?},
pdfkeywords={},
pdfsubject={},
pdfcreator={Emacs 27.0.50 (Org mode 9.1.14)},
pdflang={Frenchb}}
\begin{document}
\maketitle
\tableofcontents
\listoftables
\listoffigures
\section{Some reference samples}
\label{sec:orgfe4b8ad}
This is created using \texttt{org-ref} 's \texttt{label} 's and \texttt{ref} 's.
\subsection{A reference\ldots{}}
\label{sec:org22891f6}
\ldots{} to \cite{gelmanBayesianDataAnalysis2013} ,a \emph{good} textbook.
\subsection{A table}
\label{sec:org844d514}
A Python block producing a (silly) table.
\begin{verbatim}
[[u+str(v) for v in range(1,4)] for u in ["a", "b"]]
\end{verbatim}
\captionof{figure}{A (silly) Python block. \label{lst:Python1}}
\begin{table}[htbp]
\caption{A (silly) Python table. \label{tab:Python1}}
\centering
\begin{tabular}{lll}
a1 & a2 & a3\\
b1 & b2 & b3\\
\end{tabular}
\end{table}
The table \ref{tab:Python1} is produced by the code \ref{lst:Python1}.
\subsection{A figure}
\label{sec:orgf75a27d}
A Python block producing a figure.
\begin{verbatim}
import matplotlib.pyplot as plt, numpy as np
from sympy import *
x=symbols("x")
f=lambda x:sin(x)/x
t=np.arange(-6*np.pi,6*np.pi, 0.1)
ft=[f(u) for u in t]
fig=plt.figure(figsize=(3,2))
plt.plot(t, ft, "b-")
fig.tight_layout()
plt.savefig("tstfig.pdf")
"tstfig.pdf"
\end{verbatim}
\captionof{figure}{A Python block producing a figure. \label{lst:Python2}}
\begin{figure}[htbp]
\centering
\includegraphics[width=.9\linewidth]{tstfig.pdf}
\caption{A (not so silly) figure produced by Python. \label{fig:Python2}}
\end{figure}
The figure \ref{fig:Python2} is produced by the code \ref{lst:Python2}.
\bibliographystyle{vancouver}
\bibliography{Minimal}
\end{document}
[-- Attachment #5: Min-Ref exported by org-latex-export-to-pdf.pdf --]
[-- Type: application/pdf, Size: 143423 bytes --]
[-- Attachment #6: Min-Ref exported by org-odt-export-to-odt.odt --]
[-- Type: application/vnd.oasis.opendocument.text, Size: 18946 bytes --]
[-- Attachment #7: Min-Ref exported by org-pandoc-export-to-latex-pdf.pdf --]
[-- Type: application/pdf, Size: 202284 bytes --]
[-- Attachment #8: Min-Ref exported by org-pandoc-export-to-odt.odt --]
[-- Type: application/vnd.oasis.opendocument.text, Size: 17044 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* (no subject)
@ 2019-02-04 3:40 Lawrence Bottorff
0 siblings, 0 replies; 95+ messages in thread
From: Lawrence Bottorff @ 2019-02-04 3:40 UTC (permalink / raw)
To: emacs-orgmode Mailinglist
[-- Attachment #1: Type: text/plain, Size: 296 bytes --]
At the bottom of this <https://orgmode.org/manual/Literal-examples.html> is
a description of adding a `org-store-link` inside of a babel code block
edit called with C-c ' , however, it doesn't seem to work with C-c l ,
although M-x org-store-line does work. Or am I seeing, doing this wrong?
LB
[-- Attachment #2: Type: text/html, Size: 395 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
* Re: (no subject)
2018-10-15 8:04 Nik Clayton
2018-10-17 13:20 ` Nicolas Goaziou
@ 2019-09-15 21:06 ` Matt Price
1 sibling, 0 replies; 95+ messages in thread
From: Matt Price @ 2019-09-15 21:06 UTC (permalink / raw)
To: Nik Clayton; +Cc: emacs-orgmode
[-- Attachment #1: Type: text/plain, Size: 2113 bytes --]
I'm replying a year late to this thread, post-merge, because I've
discovered it breaks interaction with the highlight.js library(
https://highlightjs.org/) and therefore my workflow, which depends on
highlightjs via reveal.js.
My difficulty is with the current version of ~org-html-do-format-code~,
which currently surrounds each loc with a ~<code>~ tag and potentially some
classes:
(format "<code%s>%s</code>"
(if num-start
(format " data-ox-html-linenr=\"%s\"" line-num)
"")
loc)
On Mon, Oct 15, 2018 at 4:07 AM Nik Clayton <nik@ngo.org.uk> wrote:
> Hi,
>
> I'd like to propose a couple of changes / enhancements to how org-export
> exports some data in to HTML files to make it slightly easier to style
> those files.
>
> The first is re line-numbers.
>
> At the moment those get exported as content in the HTML, although they're
> really additional metadata. Amongst other things, this means that if you
> copy/paste from the output you get the line numbers included in the text
> that's copied.
>
> CSS supports arbitrary counters that can be associated with content,
> starting from an arbitrary value. My current hack that sort of works is the
> following CSS:
> .....
> and a change to org-html-do-format-code to wrap each line in its own
> <code>...</code> element:
>
> ...
> ;; Transcoded src line.
> (format "<code>%s</code>" loc)
> ...
>
> a) Does that sound reasonable?
> b) Should this replace the current approach, or be an option that can be
> toggled by a customisation?
>
> I agree that thisseems to make sense for many applications. But
highlight.js is a very widely-used highlighting library that expects
exactly one ~<code>~ tag inside a given ~<pre>~ block. The additional
~<code>~ tags that org now generates on html export break highlight in
ways I don't believe can easily be fixed. I wonder if we could revisit the
idea of adding a user option that would allow this feature to be switched
off? If this would be of general use I can prepare a patch.
Thanks,
Matt
[-- Attachment #2: Type: text/html, Size: 3506 bytes --]
^ permalink raw reply [flat|nested] 95+ messages in thread
end of thread, other threads:[~2019-09-15 21:06 UTC | newest]
Thread overview: 95+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-01-05 17:36 (no subject) Ab Cd
2012-01-05 17:41 ` About headlines, checkboxes and heritage Ab Cd
2012-01-06 13:40 ` Nicolas Goaziou
-- strict thread matches above, loose matches on Subject: below --
2019-02-04 3:40 (no subject) Lawrence Bottorff
2018-12-19 12:58 Emmanuel Charpentier
2018-10-20 9:02 stardiviner
2018-10-15 8:04 Nik Clayton
2018-10-17 13:20 ` Nicolas Goaziou
2019-09-15 21:06 ` Matt Price
2018-05-03 13:44 Arne Babenhauserheide
2018-05-03 14:29 ` Bastien
2018-05-03 21:02 ` Arne Babenhauserheide
2018-05-04 1:02 ` steen
2018-05-04 5:38 ` Michael Welle
2018-05-11 20:07 ` Nicolas Goaziou
2018-03-02 16:10 Joseph Vidal-Rosset
2016-11-01 16:10 John Kitchin
2016-09-19 16:38 John Brodie
2016-09-20 20:32 ` Nicolas Goaziou
2015-11-03 19:53 Fritz Kunze
2015-10-11 19:51 Shankar Rao
2015-09-04 14:51 Eduardo Mercovich
2015-09-04 15:25 ` thomas
2015-09-04 18:35 ` Eduardo Mercovich
2015-01-24 16:23 M.S.Khed Khed
2014-05-03 1:52 Ryan Moszynski
2014-05-03 3:01 ` William Henney
2014-05-03 3:22 ` William Henney
2014-01-30 0:03 Ken Okada
2014-01-30 0:15 ` Bastien
2014-01-30 0:22 ` John Hendy
2014-01-30 7:17 ` Ken Okada
2014-01-31 6:29 ` John Hendy
2014-01-31 7:11 ` Nick Dokos
2014-02-03 22:13 ` Marcin Borkowski
2013-11-06 6:13 Cecil Westerhof
2013-11-06 8:32 ` Bastien
2013-11-06 8:42 ` Bastien
[not found] ` <CAG-LmmDGaczy8pyeCTU6-YJ9oTBeEufqU6kC2PUb-U6ucexhZA@mail.gmail.com>
[not found] ` <87txfpaeli.fsf@bzg.ath.cx>
[not found] ` <CAG-LmmDFjqbuqfF1YJoeX6x_UdujK+0noeFcGSD15hs49Tbo=Q@mail.gmail.com>
2013-11-06 18:38 ` Cecil Westerhof
2013-10-11 7:14 "Recent items" Agenda view? Martin Beck
2013-10-11 20:35 ` Samuel Wales
2013-10-14 8:46 ` (no subject) Martin Beck
2013-03-07 20:37 [RFC] Org syntax (draft) Nicolas Goaziou
2013-03-08 10:39 ` was: " Andreas Röhler
2013-03-08 10:46 ` (no subject) Bastien
2013-03-08 10:59 ` Andreas Röhler
2013-03-08 11:05 ` Bastien
2013-03-08 11:18 ` Andreas Röhler
2013-03-08 11:23 ` Bastien
2013-03-08 13:00 ` Andreas Röhler
2013-03-08 13:12 ` Bastien
2013-03-08 15:22 ` Andreas Röhler
2013-03-08 15:40 ` Bastien
2013-03-08 20:39 ` T.F. Torrey
2013-03-08 21:19 ` Nicolas Goaziou
2013-03-08 21:57 ` Suvayu Ali
2013-03-09 14:09 ` Bastien
2013-03-10 22:40 ` T.F. Torrey
2013-03-03 0:55 Vikas Rawal
2013-01-29 9:43 Martin Beck
2013-01-30 12:12 ` Bernt Hansen
2013-01-24 12:11 Herbert Sitz
2013-01-15 19:26 Rick Frankel
2012-11-11 15:36 Fabrice Popineau
2012-11-11 23:09 ` Nicolas Goaziou
2012-11-12 7:40 ` Fabrice Popineau
2012-11-07 18:50 Kevin Buchs
2012-09-29 7:30 Neuwirth Erich
2012-09-29 7:39 ` Bastien
2012-09-29 8:09 ` Achim Gratz
2012-09-29 9:12 ` Bastien
2012-09-29 9:52 ` Achim Gratz
2012-08-24 16:21 Feiming Chen
2012-05-22 3:32 "Smart" quotes Mark E. Shoulson
2012-05-23 22:17 ` Nicolas Goaziou
2012-05-24 3:05 ` Mark E. Shoulson
2012-05-25 17:14 ` Nicolas Goaziou
2012-05-25 22:51 ` Mark E. Shoulson
2012-05-26 6:48 ` Nicolas Goaziou
2012-05-29 1:30 ` Mark E. Shoulson
2012-05-29 17:57 ` Nicolas Goaziou
2012-05-30 0:51 ` Mark E. Shoulson
2012-05-31 1:50 ` (no subject) Mark Shoulson
2012-05-31 13:38 ` Nicolas Goaziou
2012-05-11 20:56 Rick Frankel
2012-05-11 20:38 ` Eric Schulte
2012-05-11 22:43 ` Bernt Hansen
2012-05-17 6:23 ` Bastien
2012-01-23 12:00 Tom Regner
2012-01-23 16:34 ` Tom Regner
2012-01-23 20:31 ` Eric Schulte
2012-01-24 1:55 ` Tom Regner
2011-08-06 1:19 Vikas Rawal
2011-02-21 22:13 Vincent-Xavier JUMEL
2011-02-23 19:52 ` Bernt Hansen
2011-02-23 19:54 ` Bernt Hansen
2011-04-09 9:41 ` Vincent-Xavier JUMEL
2010-06-29 17:50 amscopub-mail
2009-09-18 12:35 Robin Green
2009-02-17 18:57 Matthew Lundin
2009-02-17 20:26 ` Carsten Dominik
2008-01-28 11:20 Dimitris Kapetanakis
2008-01-29 9:39 ` Bastien Guerry
2007-11-13 20:35 François Puitg
2007-10-20 10:33 Kevin Brubeck Unhammer
2007-10-21 22:20 ` Bastien
2006-05-25 10:43 Thomas Baumann
2006-05-25 12:49 ` Carsten Dominik
Code repositories for project(s) associated with this public inbox
https://git.savannah.gnu.org/cgit/emacs/org-mode.git
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for read-only IMAP folder(s) and NNTP newsgroup(s).